Company type | Manufacturer |
---|---|
Founded | 1907 |
Products | Garbage trucks |
Parent | Terberg Group, Ros Roca |
Subsidiaries | Dennis Eagle Inc |
Dennis Eagle Limited is an English bin lorry manufacturer owned by Terberg Environmental.
Before operations were merged with Terberg Environmental, Dennis Eagle employed a workforce of over 600 across its two manufacturing sites and service network, which included nine depots as well as mobile engineers based throughout the UK. Body and chassis assembly took place at the Warwick headquarters, with cabs built at the additional manufacturing facility in Blackpool. Producing over 1,000 refuse collection vehicles each year, the company also had an international network of distributors.[ citation needed ]
In addition to domestic success, Dennis Eagle vehicles are now used globally, with their refuse collection trucks being sold in markets such as Australia, New Zealand, and parts of Asia, reflecting their growing international presence. [1]
Dennis Brothers had made specialised vehicles for municipal authorities from the early 1920s though they were primarily builders of chassis for buses, fire engines and haulage lorries.
Eagle Engineering Company, agricultural and general engineers of Warwick, was incorporated in 1907. It made oil and petrol internal combustion stationary engines and some small agricultural equipment and provided municipalities with refuse vehicles and road sweepers and tower lorries at relatively inexpensive prices sometimes built on Dennis chassis. Soon after the start of the Great Depression Eagle turned from engines to building road trailers and semi-trailers for articulated vehicles. They also added an electrical and wireless department and produced Chakophone wireless sets until 1936. Ownership changed a number of times during the 1960s. [2]
Dennis Eagle's history goes back to the autumn of 1971 when Hestair Group bought Yorkshire Vehicles Limited in Leeds and Eagle Engineering Co in Warwick. [3] Six months later Hestair bought Dennis Motor Holdings [4] and thereafter managed the businesses as the Vehicle Division of Hestair Engineering. Municipal bodies were made in Warwick by Hestair Eagle (incorporating Yorkshire Vehicles), municipal chassis were made by Dennis in Guildford, cabs were made in Blackpool.
Hestair set up a special Environmental Vehicles Division for its waste management activities. [5] In 1985 Hestair moved municipal chassis manufacture from the Dennis plant at Guildford to a new 125,000 square foot plant on the Heathcote Industrial Estate at Warwick. They were joined there by Hestair Eagle's municipal bodies operations which moved across Warwick from Saltisford. The new Dennis Eagle plant was the largest refuse vehicle manufacturing site in Europe. [6] [7] [8] In 1991 Shelvoke & Drewry's design rights were bought from the receiver.
Environmental Vehicles, Dennis Eagle, now represented around one-third of Hestair's Vehicle Division. Following more changes of parent company (Hestair to Trinity to Dennis Group to Mayflower) Dennis Eagle was sold in July 1999 to NatWest Equity Partners. [9] In January 2004, Dennis Eagle was purchased by ABN Amro. [10]
In 2007, Dennis Eagle was purchased by Ros Roca. [11] Ros Roca and Terberg Environmental then merged in 2016, with Terberg holding the controlling interest. The various companies within the new group retained their trading names. [12] [13]
In 2019, Dennis Eagle introduced the eCollect, an all-electric refuse collection vehicle, aimed at reducing emissions and supporting sustainable waste management practices. The eCollect has since been adopted by multiple local authorities in the UK, making Dennis Eagle a leader in environmentally friendly waste solutions. [14]
In 2021, Dennis Eagle entered the North American market as "Dennis Eagle US" with their new ProView chassis being built at a new facility in Summerville, South Carolina. [15]
In 2024, Dennis Eagle sold a record breaking 151 new Elite+ vehicles to Birmingham City Council. [16] These new vehicles aim to replace the councils outdated vehicles that are beyond their operational lifespan.
This section needs expansion. You can help by adding to it. (May 2022) |
From | To | Name | Type | Significance |
---|---|---|---|---|
? | ? | Pax (I to V) | Chassis | |
? | ? | Paxit (I to IV & Major) | Body | |
? | ? | Bulkmaster | Body | |
1988 | 1992 | Delta (Municipal) | Chassis | The Perkins Phaser 180 engine and partially synchromeshed Eaton gearbox and imroved cab ergonomics reduced the physical demand on the driver while boosting the serviceable lifetime. |
1979 | 2001 | Phoenix | Body | Rear loading RCV featuring intermittent 'sweep-slide' packer. Most rode on the Dennis Delta chassis from 1979 to 1992, which used the joint cab design shared with Shelvoke & Drewry (whose corresponding version as known as the "P-type"). |
1992 | 2003 | Elite | Chassis | The UK's first low entry cab, replaces the Delta/Municipal chassis. [17] |
? | ? | Beta 500 [18] | Binlift | |
2001 | 2014 | Phoenix 2 | Body | Replacement for the Phoenix, although closely based on the Ex-Cell model. |
2003 | 2014 | Elite 2 [19] | Chassis | |
? | Current | Beta 2 [20] | Binlift | |
2010 | Current | Olympus [21] | Body | A minor upgrade from the Phoenix 2 resulting from the merger with Ros Roca. Available in many sizes. |
2010 | Current | Olympus Twin Pack [21] | Body | Two body compartments that can individually hold different types of waste. |
2010 | Current | Olympus Duo [21] | Body | Two waste compartments. Essentially a smaller Olympus with a pod at the front. |
2010 | Current | Olympus Mini [21] | Body | Compact version of the Olympus intended to be mounted on smaller chassis. |
2012 | Current | Olympus One Pass [21] | Body | Three waste compartments. Essentially a smaller Olympus Twin Pack with a pod. |
2013 | 2021 | Elite 6 | Chassis | The name reflects its Euro 6 compliance. |
2019 | Current | eCollect [22] | Chassis | World's first OEM Electric RCV. |
2021 | Current | Elite+ [23] | Chassis |
Dennis Eagle Inc, also known as Dennis Eagle US, began production of the ProView chassis at a new facility in Summerville, South Carolina [15] in 2021. The plant manufactures ProView chassis for distributors in the US and Canada.
From | To | Name | Type | Significance |
---|---|---|---|---|
2021 | Current | ProView | Chassis | The ProView chassis is designed specifically for the North American market. Derived from the Elite 6, it offers unmatched driver visibility and safety, with a design fully tailored to meet American needs. This includes stronger chassis rails, a more powerful Cummins powertrain, and proudly sourced parts from American suppliers. |
Dennis Eagle produces chassis for the Australian market at its headquarters in Warwick, England. These are shipped to Australia are distributed and sold by Penske Australia & New Zealand.
From | To | Name | Type | Significance |
---|---|---|---|---|
? | 2022 | Elite 2 (Australia) | Chassis | |
2022 [24] | Current | Elite 6 (Australia) | Chassis |
A garbage truck is a truck specially designed to collect municipal solid waste and transport it to a solid waste treatment facility, such as a landfill, recycling center or transfer station. In Australia they are commonly called rubbish trucks, or garbage trucks, while in the U.K. dustbin lorry, rubbish lorry or bin lorry is commonly used. Other common names for this type of truck include trash truck in the United States, and refuse truck, dustcart, junk truck, bin wagon or bin van elsewhere. Technical names include waste collection vehicle and refuse collection vehicle (RCV). These trucks are a common sight in most urban areas.
Shelvoke and Drewry was a Letchworth, Hertfordshire, manufacturer of special purpose commercial vehicles. It was best known for its innovative waste collection vehicles that were the preferred choice of municipal authorities in the UK together with their gully emptiers, cesspool cleaning vehicles and street watering and washing vehicles.
Leyland Motors Limited was an English vehicle manufacturer of lorries, buses and trolleybuses. The company diversified into car manufacturing with its acquisitions of Triumph and Rover in 1960 and 1967, respectively. It gave its name to the British Leyland Motor Corporation, formed when it merged with British Motor Holdings in 1968, to become British Leyland after being nationalised. British Leyland later changed its name to simply BL, then in 1986 to Rover Group.
Commer was a British manufacturer of commercial and military vehicles from 1905 until 1979. Commer vehicles included car-derived vans, light vans, medium to heavy commercial trucks, and buses. The company also designed and built some of its own diesel engines for its heavy commercial vehicles.
Dennis Specialist Vehicles was an English manufacturer of commercial vehicles based in Guildford, building buses, fire engines, lorries (trucks) and municipal vehicles such as dustcarts. All vehicles were made to order to the customer's requirements and more strongly built than mass production equivalents. For most of the 20th century the Dennis company was Guildford's main employer.
Tata Motors Limited is an Indian multinational automotive company, headquartered in Mumbai and part of the Tata Group. The company produces cars, trucks, vans, and buses.
A waste collector, also known as a garbage man, garbage collector, trashman, binman or dustman, is a person employed by a public or private enterprise to collect and dispose of municipal solid waste (refuse) and recyclables from residential, commercial, industrial or other collection sites for further processing and waste disposal. Specialised waste collection vehicles featuring an array of automated functions are often deployed to assist waste collectors in reducing collection and transport time and for protection from exposure. Waste and recycling pickup work is physically demanding and usually exposes workers to an occupational hazard.
Seddon Atkinson Vehicles Limited, was a manufacturer of large goods vehicles based in Oldham, Lancashire, England, was formed after the acquisition in 1970 of Atkinson Vehicles Limited of Preston by Seddon Diesel Vehicles Limited of Oldham. In 1974, the firm was acquired by International Harvester, which sold it in March 1984 to the Spanish group Enasa which made it a subsidiary of Pegaso. In 1990, it became part of Iveco which used the brand for various types of specialised vehicles in the United Kingdom. The range of models produced included EuroMover, Pacer and Strato, which are aimed at refuse collection, recycling and construction operators.
Bean Cars was a brand of motor vehicles made in England by A Harper Sons & Bean, Ltd at factories in Dudley, Worcestershire, and Coseley, Staffordshire. The company began making cars in 1919 and diversified into light commercial vehicles in 1924. For a few years in the early 1920s Bean outsold Austin and Morris.
The Vulcan Motor and Engineering Company Limited, of Southport, England, made cars from 1902 until 1928 and commercial vehicles from 1914 until 1953.
The Northern Counties Motor & Engineering Company was an English builder of bus and coach bodywork based in Wigan.
ERF was a British truck manufacturer established in 1933 by Edwin Richard Foden, from whose initials the company was named. Its factory in Middlewich closed in 2002, and it was discontinued as a marque by owner MAN in 2007.
Karrier was a British marque of motorised municipal appliances and light commercial vehicles and trolley buses manufactured at Karrier Works, Huddersfield, West Yorkshire, by Clayton and Co. (Huddersfield) Limited. They began making Karrier motor vehicles in 1908 in Queen Street South, Huddersfield. In 1920, H.F. Clayton sold Clayton and Co's Huddersfield business into public listed company Karrier Motors while keeping their Penistone operation separate. Mechanical and electrical engineers Clayton & Co Penistone, remain active in 2020 as Clayton Penistone Group.
The Dennis Dorchester was a mid-engined heavy-duty single deck coach chassis manufactured by Dennis in small numbers between 1983 and 1988. Designed as a premium underfloor mid-engine coach chassis, it was unveiled at the 1982 Motor Show. It was aimed at operators who had purchased the Seddon Pennine 7.
The Maudslay Motor Company was a British vehicle maker based in Coventry. It was founded in 1901 and continued until 1948 when it was taken over by the Associated Equipment Company (AEC) and along with Crossley Motors the new group was renamed Associated Commercial Vehicles (ACV) Ltd.
Morrison-Electricar was a British manufacturer of milk floats and other battery electric road vehicles (BERV). Their first vehicle was built for a bakery in 1933, and the company ceased to exist when it was finally sold to M & M Electric Vehicles in 1983.
Manulectric was a British marque of milk floats and other battery electric road vehicles. The vehicles were made by Sidney Holes Electric Vehicles, of Brighton, Sussex. They were designed out of Holes' experience of doorstep milk delivery, through Holes and Davigdor Dairies. Both pedestrian controlled vehicles (PCVs) and ride-on models were produced, and entered the market around 1947. The company was bought by Stanley Engineering in the 1960s, and sold to Crompton Electricars in 1972. Some Manulectric models were subsequently manufactured by Harbilt Electric Trucks. At least four Manulectric vehicles have survived, and are privately preserved.
The Royal Terberg Group B.V. is a specialised vehicle manufacturer based in IJsselstein, Utrecht, Netherlands, building special trucks and fitting specialist equipment to other manufacturers’ trucks, cars and vans.
Ros Roca SA is a Spanish manufacturer of waste management machinery managed from Tàrrega, Catalonia, Spain and is a subsidiary of Terberg RosRoca Group.
Media related to Dennis Eagle at Wikimedia Commons