Gadow's Mill | |
Location | 1784 Barton Avenue West Bend, Wisconsin, U.S. |
---|---|
Coordinates | 43°26′33″N88°10′52″W / 43.44250°N 88.18111°W Coordinates: 43°26′33″N88°10′52″W / 43.44250°N 88.18111°W |
Area | less than one acre |
Built | 1843 |
Architect | Robert Price |
NRHP reference No. | 74000136 [1] |
Added to NRHP | December 24, 1974 |
Gadow's Mill (Barton Roller Mills) is a former grist mill on the Milwaukee River in West Bend, Wisconsin, United States, [2] that is listed on the National Register of Historic Places (NRHP). [1]
In 1843, Robert Price built a sawmill on the Milwaukee River. When completed, the mill measured sixty-five by forty-four feet (20 by 13 m), and was two and one half stories high. In 1847, the mill was converted to grind wheat into flour and Price renamed the facility as the Barton Roller Mills. For many years Washington County farmers brought their wheat to Price's mill where it was ground, packed into wooden barrels, and shipped by wagon to Allenton from where it was then shipped by rail to larger markets.
Barton Roller Mills remained active into the 1890s. During this time ownership of the building changed hands several times. In 1894, Mr. and Mrs. Charles Suckow of Milwaukee purchased the mill. In 1900, Mr. Suckow erected a new elevator (not extant) on the east side of the mill. William F. Gadow acquired a majority interest in the mill in 1905. Nine years later fire destroyed most of the equipment and some of the structure itself. Gadow turned this misfortune into an opportunity to update his mill. That year he replaced the lost machinery with five new Allis-Chalmers [3] rollers for wheat, five mills for rye, and a French Burr Stone which was used to produce coarsely ground flour. The mill remained in the Gadow family until 1964, at which time the owners discontinued operations. [3]
In 1966, the city of West Bend purchased the mill, and in 1975, the city turned the building over to Leonard S. Dricken (son-in-law of Water A. Gadow) who would later restore the mill. The Gadow mill was the last mill in Wisconsin to grind wheat flour and also one of the last to operate on water power. [2] [3]
West Bend is a town in Washington County, Wisconsin, United States. The population was 4,834 at the 2000 census. The City of West Bend is located partially within the town. The unincorporated community of Nabob is located in the town.
Bridgeton is an unincorporated community in Raccoon Township, Parke County, in the U.S. state of Indiana. It is notable for its covered bridge, which was destroyed on April 28, 2005, by a fire set by an arsonist. A historically accurate reconstruction of the bridge was completed in October, 2006.
A middlings purifier is a device used in the production of flour to remove the husks from the kernels of wheat. It was developed in Minnesota by Edmund LaCroix, a French inventor hired by Cadwallader C. Washburn and George Christian of the Washburn "A" Mill. It was developed to complement the emerging roller mill technique of the late 19th century, which used corrugated metal rollers instead of abrasive grindstones to grind wheat into flour. The middlings purifier was used to separate the bran from the usable part of the flour. The machine developed by LaCroix passed the partially ground middlings over a screen, and a stream of air blew away the particles of bran.
The Malvern Roller Mill, also known as Appel Mill and Malvern Milling Company, is a 19th-century grist mill located near the unincorporated village of Malvern, Illinois, in rural Whiteside County, north of Morrison, Illinois, United States. The original mill on the site, built by 1853, was destroyed by a flood and the present mill was erected in 1858. The mill's first owner was William P. Hiddleson who operated the mill until he sold to Benjamin Hough in 1871. The mill changed hands over the years until it landed under the control of George Appel in 1892. The Appel family closed the mill in 1942 but it remained in their family until 1985. The Malvern Roller Mill was added to the U.S. National Register of Historic Places in 1995.
Swany White Flour Mills is a flour manufacturing and wholesaling company based in Freeport, Minnesota, United States. It was established in the late 19th century and has been owned by the same family since 1903. On December 27, 2011, the company's historic 114-year-old mill burned down. Construction on a new facility began the following summer, and Swany White Flour Mills was able to remain in business.
Schech's Mill is a historic mill in Houston County, Minnesota, United States. It is one of three watermills in Minnesota still operating solely with water power and the only one to have its original millstones. Built by John Blinn in 1876, it was purchased by a Minneapolis miller, Michael Schech who had emigrated from Bavaria, Germany. The mill produced cornmeal, rye buckwheat, wheat flour, graham flour, and whole wheat cereal, which was sold in Caledonia and Houston, Minnesota. Schech's Mill is unique in the state for retaining intact and operable machinery from the 1870s, after the middlings purifier had been introduced but before millstones were supplanted by roller mills. In 1922, a concrete dam was built to replace the original wooden one.
This is a list of the National Register of Historic Places listings in Ozaukee County, Wisconsin. It is intended to provide a comprehensive listing of entries in the National Register of Historic Places that are located in Ozaukee County, Wisconsin. The locations of National Register properties for which the latitude and longitude coordinates are included below may be seen in a map.
This is a list of the National Register of Historic Places listings in Washington County, Wisconsin. It is intended to provide a comprehensive listing of entries in the National Register of Historic Places that are located in Washington County, Wisconsin. The locations of National Register properties for which the latitude and longitude coordinates are included below may be seen in a map.
The Cedarburg Mill is a former gristmill in Cedarburg, Wisconsin that is listed on the U.S. National Register of Historic Places. Located the on Cedar Creek, the building was constructed in 1855 by Frederick Hilgen and William Schroeder to replace a smaller wooden mill from the 1840s. At the time of its construction, the five-story structure was the tallest building in Cedarburg.
The Edward T. Archibald House is a historic farmhouse in Dundas, Minnesota, United States. The private home was placed on the National Register of Historic Places (NRHP) on June 17, 1976. Built in the 1860s, the farmhouse is significant for its association with the prominent miller Edward T. Archibald, whose nearby Archibald Mill was an important mill in the history of Minnesota's flour milling industry.
A gristmill grinds cereal grain into flour and middlings. The term can refer to either the grinding mechanism or the building that holds it. Grist is grain that has been separated from its chaff in preparation for grinding.
Easton Roller Mill is a historic sawmill and grist mill located near Morgantown, Monongalia County, West Virginia. Construction began in 1864 and was completed in 1867. During the first 10 or so years, the mill changed hands from the original builder, Henry Koontz of Frostburg MD, about four times before mill-modernizer Isaac Morris bought the mill in 1894. Originally it was a 3 1/2-story rectangular, timber frame building with a shed addition; however, the shed was removed In recent years. Most mills of this era were exclusively using Burr stones for milling and grinding, however in 1894, the owner, Isaac Morris, installed roller mills for the production of high-grade white flour coming into popular demand. At that time, the Burr stone mill was relegated to grinding cornmeal, and so began a second business of cornmeal and animal feed products also sold at the Easton mill. It is probable Mr. Morris also installed the current steam engine, an 1875 Lane & Bodley 40 HP single expansion engine. The engine once ran on coal-generated steam; however, for insurance reasons, it now runs on compressed air for demonstration purposes. The mill ran under Mr. Morris' ownership until 1910. William C. Ley bought the mill in 1910 and ran it 24 hours a day until 1930. We are told that Mr. Ley was of German descent, was tall, spoke with a heavy accent, and often wore a thick black mustache under his wide brimmed hat. He was known for running a very expertly tuned operation, and keeping his equipment in perfect working order. We believe Mr. Ley potentially ran the mill seasonally through the 1930s, until his death in 1941. Between 1939 and Ley's death in 1941, Ley's daughter Estella Ley-Pickenpaugh and her husband Fred Pickenpaugh attempted to restore the mill to full working order, only to discover local wheat and grains unavailable, as most milling had moved to large-scale mills in the Midwest. During this time they may have been assisted by Mr. Ley's milling partner Frank A. Walls of Easton. It is unclear whether Walls held ownership interest in the mill at any time; however, his name appears on the cornmeal bags only. The mill was willed by Estella Ley-Pickenpaugh to the Monongalia Historical Society in 1978. In the fall-winter of 2012–2013, restoration work began at the mill. The mill is expected to be operating and touring visitors by spring 2013.
The Cedarburg Woolen Co. Worsted Mill is a former woolen mill on the Milwaukee River in Grafton, Wisconsin. In the late-1800s, the Cedarburg Woolen Company in neighboring Cedarburg decided to expand their production by opening a second mill.
The Grafton Flour Mill is a former grist mill on the Milwaukee River in Grafton, Wisconsin, United States. The original section was built in 1846 by a group of Yankee farmers as a flour mill and produced flour for many years through a succession of owners.
John Stevens was a miller and inventor who lived in Neenah, Wisconsin. His inventions in flour milling revolutionized the process, leading to large-scale shifts in wheat-growing regions, and to the predominance of particular milling companies and mill-equipment manufacturers. Today Patent flour is still referred to due to Stevens' patents.
The Neligh Mill is a water-powered flour mill in the city of Neligh in the northeastern part of the state of Nebraska in the Midwestern United States. The mill was built in 1873 by John Neligh, the city's founder, to make use of water power from the Elkhorn River. It operated for nearly one hundred years until it closed in 1969.
William Caldwell was an American shopkeeper from Barton, Wisconsin, who served a single one-year term as a Whig member of the Wisconsin State Assembly in the 1st Wisconsin Legislature. He was the only Whig among the five Assemblymen from Washington County.
Drinkwater & Schriver Mill, also known as Cedar Point Mill, was listed on the National Register of Historic Places (NRHP) in 2006. It is located in Cedar Point, Kansas, United States.
Hodgson-Aid Mill, also known as Hodgson Water Mill and Aid-Hodgson Mill, is a historic grist mill located on Bryant Creek near Sycamore, Ozark County, Missouri. It was constructed around 1897, and is a 3+1⁄2-story, timber frame mill building covered with red-painted weatherboards. Associated with the mill are the man-made mill pond and the limestone barrel vault constructed at the base of the cliff where Hodgson Spring discharges. The mill has not been in operation since 1976. It is privately owned.
The Barton Historic District is a historic district in West Bend, Wisconsin.
Media related to Gadow's Mill at Wikimedia Commons