Imperial Schrade Corp. was an American knife manufacturer of hunting knives, pocketknives, utility knives, and bayonets during the 20th and early 21st centuries. The consolidation of five forerunner companies, [1] including its namesakes, the Imperial Knife Company, founded 1916, and the Schrade Cutlery Company, founded in 1904, Imperial Schrade manufactured its products in the United States and Ireland and sold through hardware stores, department stores, and on military bases. The original company's fortunes declined and in 2004 it entered into bankruptcy where all equipment and intellectual property was sold off to reimburse creditors. The name and intellectual property (but not the factory nor equipment) was bought by Taylor Brands and used for marketing purposes. As of 2016, these brands are owned by Smith & Wesson.
The Imperial Knife Company had its roots at the Empire Knife Company in Winsted, Connecticut. In 1916, two men named Felix and Michael Mirando moved from Frosolone Molise in Italy to Providence, Rhode Island to be near its jewelry industry and began making skeletons for “waldemar,” or pocket watch chain knives. [2] With their friend Domenic Fazzano as manager, they established the Imperial Knife Company, which would at one point grow to be the largest knife manufacturer in the United States. [3] [4] The company developed a number of successful innovations in the manufacture of commercial value-priced folding pocket knives.
In 1941, Albert M. Baer purchased the Ulster Knife Company (which was founded in Ellenville, New York, in the 1870s) and merged it with the Imperial Knife Company and designated this new business as the Imperial Knife Associated Companies, to produce knives for the military. Albert's brother, Henry Baer, was the company's first president and the namesake for Schrade's "Uncle Henry" line of knives. [5]
Tang stamps bearing the Imperial name appeared until 1988 when they were discontinued and replaced by the Schrade name.
Schrade Cutlery Company had its roots in the New York Press Button Knife Company, formed in 1892 by George Schrade, an inventor from Sheffield, England. Unable to raise sufficient capital to begin knife production, Schrade sold a partial interest in the company to the Walden Knife Company. The company's unusual name arose from its first knife design, a switchblade or automatic-opening pocket knife with an operating button mounted in the knife bolster. First patented by Schrade in 1892, the knife was eventually produced with a unique style of clip point blade. In 1903, Schrade sold all of his interest in the New York Press Button Knife Co. to Walden Knife Company. The following year, Schrade formed the Schrade Cutlery Company in Walden.
In 1906–07, Schrade patented the Safety Pushbutton Knives, an improved series of switchblade knives with side-mounted operating button and a sliding safety switch. Later developed in slightly modified form as the Presto series, the Schrade switchblade would come to dominate the automatic knife market in the United States for the next fifty-five years.
From 1911–1916, George Schrade resided in the knifemaking center of Solingen, Germany, where he ran a small workshop. There Schrade developed a new type of switchblade knife, which he titled the Springer. However, in 1916 the German government seized all of Schrade's assets in Germany to assist its war production. Schrade returned to the United States, though his Springer switchblade would live on; now unprotected by patent, the type was manufactured by several Solingen shops for many years thereafter.
In 1917, Schrade licensed a flylock switchblade design to the Challenge Cutlery Company, which he then joined. Schrade pursued his knifemaking interests at both Challenge and at Schrade, where his brother George now managed one of the company's factories. In the 1920s, Schrade bought the defunct Walden Cutlery Company in order to obtain their stocks of handle material for his knives. [6] [7]
In 1928, the Challenge Cutlery Co. closed after the death of its owner, Charles F. Wiebusch. Schrade formed a new company, the Geo. Schrade Knife Co. in Bridgeport, acquiring knifemaking machinery from the old Challenge Cutlery assets. At the new company Schrade made Presto switchblades as well as Wire Jack jackknives, and other low-end pocket knives. George Schrade died in 1940 (According to; [8] George Schrade died in 1945), and the Geo. Schrade Knife Co. was sold by his sons in 1956 to Boker Knife Co. of Newark, New Jersey, but the company closed operations in 1958 after Congress passed a law banning the sale of switchblades across state lines. Schrade's other company, the Schrade Cutlery Co., was sold in 1946 to the Imperial Knife Associated Companies, becoming the Schrade-Walden Cutlery Co., Inc.
The Baers purchased Schrade Cutlery Company in 1946 from J. Louis Schrade and renamed it the Schrade Walden Cutlery Corporation, a division of the Imperial Knife Associated Companies group. [6] The Schrade-Walden division was moved from Walden, New York, to Ellenville, New York, after a fire consumed the factory in 1958, though the two companies would maintain separate manufacturing facilities. [6] Imperial Knife had positive economic growth up to the late 1970s, but as the conglomerate entered the 1980s, a consolidation took place and the company divested itself of various holdings in order to streamline management. [9]
In 1983, Albert M. Baer took the company private to ward off hostile investors by purchasing all outstanding stock in the company. The company changed names in 1985 to Imperial Schrade Corp. and Walter Gardiner was named President and COO. All U.S. operations were combined under one roof in Ellenville, the vacant Channel Master antenna factory. In the 1990s, the company entered the multi-tool market and the Baers were both inducted into the Blade Magazine Cutlery Hall of Fame . [10]
In July 2004, the year the company celebrated its 100th anniversary, the factory in Ellenville was closed. The Schrade name was purchased by Taylor Brands LLC, who continued to manufacture products under the Schrade brand as well as Old Timer, Uncle Henry, Imperial, and Smith & Wesson knives. Production was moved to China.
In July 2016, Smith & Wesson Holding Corporation announced that its Battenfeld Technologies division was to purchase Taylor Brands. [11]
A knife is a tool or weapon with a cutting edge or blade, usually attached to a handle or hilt. One of the earliest tools used by humanity, knives appeared at least 2.5 million years ago, as evidenced by the Oldowan tools. Originally made of wood, bone, and stone, over the centuries, in step with improvements in both metallurgy and manufacturing, knife blades have been made from copper, bronze, iron, steel, ceramic, and titanium. Most modern knives have either fixed or folding blades; blade patterns and styles vary by maker and country of origin.
Walden is the largest of three villages of the town of Montgomery in Orange County, New York, United States. The population was 6,818 at the 2020 census. It has the ZIP Code 12586 and the 778 telephone exchange within the 845 area code. Walden is part of the Kiryas Joel−Poughkeepsie−Newburgh, NY Metropolitan Statistical Area as well as the larger New York−Newark−Bridgeport, NY-NJ-CT-PA Combined Statistical Area.
A switchblade is a pocketknife with a sliding or pivoting blade contained in the handle which is extended automatically by a spring when a button, lever, or switch on the handle or bolster is activated. Virtually all switchblades incorporate a locking blade, where the blade is locked against accidental closure when the blade is in the open position. It is unlocked by a mechanism that allows the blade to be folded and locked in the closed position.
Wenger was a Swiss cutlery manufacturer that exists today as a brand of once-rival Victorinox, used for knives, watches and licensed products. Founded in 1893, it was best known as one of two companies to manufacture Swiss Army knives. Based in Delémont, Wenger was acquired in 2005 by Victorinox and partially absorbed. Since 2013 Wenger Swiss Army knives have been integrated in the Victorinox collection as the "Delémont collection".
A pocketknife is a knife with one or more blades that fold into the handle. They are also known as jackknives (jack-knife), folding knives, EDC knife, or may be referred to as a penknife, though a penknife may also be a specific kind of pocketknife. A typical blade length is 5 to 15 centimetres.
A gravity knife is a knife with a blade contained in its handle, and that opens its blade through the force of gravity. This mechanism of opening is fundamentally different from the switchblade, which extends its spring-propelled blade automatically upon the push of a button, switch, or fulcrum lever. The main purpose of gravity opening is that it allows opening and closing to be done one handed, in situations where the other hand is occupied. Hence, historically they have been issued to parachutists to cut off caught lines, such as lines tangled in trees, a major potential use of the gravity knife.
The Camillus Cutlery Company is one of the oldest knife manufacturers in the United States. The Company was founded in 1876 and produced millions of knives until it filed for bankruptcy in 2007. Its brand name and intellectual property rights were purchased by Acme United Corporation, which re-launched the Camillus brand in May 2009 using modern materials.
Buck Knives is an American knife manufacturer founded in Mountain Home, Idaho and now located in Post Falls, Idaho. The company has a long history through five generations of the Buck family from 1902 to the present day. Buck Knives primarily manufactures sport and field knives and is credited with inventing the "folding hunting knife" and popularizing it to such a degree that the term "buck knife" has become synonymous with folding lockback knives, including those made by other manufacturers.
WÜSTHOF is a knife-maker based in Solingen, Germany. Family owned for seven generations, the company's main products are mid-priced to high-end kitchen knives for domestic and professional use. WÜSTHOF is one of the leading manufacturers of chef's knives.
Ernest R. Emerson is an American custom knifemaker, martial artist, and edged-weapons expert. Originally an engineer and machinist in the aerospace industry, Emerson became a knifemaker by producing knives for a martial arts class and making art knives early in his knifemaking career. In the 1980s he became better known for his combat knives and popularizing a style of knife known as the Tactical-folder.
Robert Waldorf Loveless, a.k.a. Bob Loveless or RW Loveless, was an American knife maker who designed and popularized the hollowground drop point blade and the use of full tapered tangs and screw-type handle scale fasteners within the art of knifemaking. He is cited by other knifemakers and collectors as one of the most innovative custom knife makers in the world.
Blade is a consumer magazine about knife collecting. The magazine is based in Appleton, Wisconsin.
W.R. Case & Sons Cutlery Company is an American manufacturer of traditional pocket knives, fixed blades/sporting knives, kitchen knives, limited edition commemoratives and collectibles. The company originated in Little Valley, New York, around the turn of the 20th century, before relocating to its current home, Bradford, Pennsylvania, in 1905. The company's namesake, William Russell Case, first made knives with his brothers under the name Case Brothers Cutlery Company. His son, John Russell ("Russ") Case, worked as a salesman for his father's company before founding W.R. Case & Sons.
SHARPFINGER® is a brand of knife modeled after the Schrade 152 OT. The SHARPFINGER trademark is designated to a variety of knives in this design by a number of makers.
An OTF Knife, also known as an out-the-front knife, sliding knife, telescoping knife, or angel blade, is a pocketknife with a blade that opens and closes through a hole in one end of the handle. This design contrasts with the majority of utility knives, which are either standard folding knives or are "fixed blade" sheath knives.
The Western Knife Company was an American manufacturer of hunting knives which began operations in Boulder, Colorado in 1911. The company is probably best known for its "Bowie" style hunting knives. The company was purchased by Coleman in 1984. Camillus Cutlery Company purchased Western in 1992. In February, 2007, Camillus closed as a result of bankruptcy due to competition from companies making cheaper knives in other countries. The Western brand and Camillus brand are now owned by the Acme United Corporation and manufactured in Asia.
Ka-Bar is the contemporary popular name for the combat knife first adopted by the United States Marine Corps in November 1942 as the 1219C2 combat knife, and subsequently adopted by the United States Navy as the U.S. Navy utility knife, Mark 2. Ka-Bar is the name of a related knife manufacturing company, Ka-Bar Knives., Inc., of Olean, New York, a subsidiary of the Cutco Corporation.
Bo Randall was an American knifemaker who founded Randall Made Knives in Orlando, Florida.
Michael Leon Walker is an American custom knifemaker and sculptor based in Taos, New Mexico. Walker is the inventor of more than 20 different knife mechanisms including the Walker Linerlock for which he secured a trademark in 1980.
The Blade Show is an annual tradeshow for the cutlery industry. It is the largest event of its type in the world. The show is owned by Caribou Media Group and is hosted by Blade Magazine. The event has over 1,000 exhibitors and is the host for inductees into the annual Cutlery Hall of Fame. It also hosts the annual Blade HQ Balisong Competition, BladeSports International Cutting World Championships, Blade University, Knife of the Year Awards, and a variety of knifemaking classes and demos. The event takes place every year over the course of several days and brings in knifemakers and knife companies from all parts of world.