A gravity knife is a knife with a blade contained in its handle, which opens its blade through the force of gravity. [1] This mechanism of opening is fundamentally different from the switchblade, which extends its spring-propelled blade automatically upon the push of a button, switch, or fulcrum lever. [1] The main purpose of gravity opening is that it allows opening and closing to be done with one hand, in situations where the other hand is occupied. Hence, historically they have been issued to parachutists to cut off caught lines, such as lines tangled in trees, a major potential use of the gravity knife.[ citation needed ]
The gravity knife uses a button, trigger, or fulcrum lever to release the blade from both the open and the closed positions, and may use a side-folding or telescoping (out-the-front, or OTF) blade. While most military gravity knives utilize a locking blade design, other types may not mechanically lock open but rely instead upon friction to wedge the rear section of the blade against the interior of the handle. [2] Factory-made gravity knives have various types of buttons, triggers, and fulcrum levers, which usually are used to release the blade from both the open and the closed positions.
One of the most recognizable gravity knives is the World War II-era Flieger-Kappmesser (lit. 'flyer's cutting knife'), which utilizes a 4 in (10 cm) telescoping (OTF), gravity-propelled locking blade. First produced in 1937, the often so called Fallschirmjägermesser (lit. 'paratrooper knife') was initially issued to German flight crews and paratroops, primarily for the purpose of cutting a trapped parachutist from his rigging in case he landed with a tangled parachute, or became entangled in trees or in the water with the shroud lines. [3] The spike was used to untie knots while packing the parachutes. Luftwaffe air crew members used the knife to cut themselves out of their harnesses or cut through the aluminum hull of the aircraft after a crash landing. Though not intended for use as a fighting knife in the first place, the LGK was introduced to the 1st Skijäger Division and SS units on the Eastern Front to be used primarily as a close combat weapon from 1944 on. [4]
The Flieger-Kappmesser uses a sliding blade inside a metal gripframe, which was originally fitted with smooth wood scales. The blade itself is a relatively blunt spear-point, and the profile is flat ground, tapering to a utility edge. To open the blade, the user points the knife downwards while flipping up the fulcrum-style operating lever, allowing gravity to draw out the blade to its fullest extent. Releasing the lever locks the blade into position. The LGK may also be opened by flipping the blade release lever while flicking the wrist holding the knife, causing the blade to extend. The LGK was also equipped with a folding marlinspike or awl. Primarily intended for untangling rope knots, it was also used as a prying tool or to fix jammed weapons. The spike does not lock when opened and was never intended to be used as a combat weapon.
There are two principal types of wartime-era Flieger-Kappmesser with altogether 10 known variations. The Type I LGK (three manufacturers, five WWII variations) has wood scales (handle), was made from 1937 to 1943, and unlike successive models has no takedown capability. The Type II LGK (two manufacturers, five WWII variations) is the same knife, but with takedown features, and was produced from 1943 until 1945 and then again from c. 1950 until 1965. [4]
After the end of World War II, the newly organized West German Bundeswehr placed new orders with German cutlery manufacturers for a postwar version of the Kappmesser for issue to the Army´s airborne forces and tank crews. The West German Luftwaffe abandoned the gravity knife concept completely and purchased completely different rescue knives including a shroud line cutter. The initial Type III "trap door" gravity knife, made from 1955 to 1961, did not prove to be very reliable and thus, the original WWII Type II design was reintroduced until it was finally replaced by the early Type IV knives in about 1968. The Type IV LGK is very similar to the WWII-production Type II takedown knife, but features plastic polymer instead of wooden scales and was made by WMF, OFW and Eickhorn from 1972 to 1984. They were issued to Bundeswehr soldiers until 2017. The third West German post-war model is the Type V LGK, initially named AES79 and still today produced under the designation LL80 (1979–present) by Eickhorn. The LL80 is smaller, has fewer parts and is more cost-effective to produce than earlier Flieger-Kappmesser. [5] [4] It was procured by the Swiss Air Force and issued to their Dassault Mirage pilots in 1983. These knives are marked AES83 and bear the number of the aircraft of the metal head.
On the other side of the Iron Curtain, in the German Democratic Republic, WWII gravity knives were refurbished and re-issued to the paratroopers and pilots until the existing stock was gone. In the early 1960s two companies then produced an East German version of the Type I knives. They were then used until the early 1970s. [4]
After British forces had captured numbers of Type I Flieger-Kappmesser, the British government approached George Ibberson & Co. of Sheffield, England, a knife and cutlery manufacturer, and requested production of a British version of the German Luftwaffe Gravity Knife for the Special Operations Executive (SOE) and other clandestine warfare units. [6] Under the initial wartime contract, George Ibberson & Co. made 500 gravity knives for issue to the SOE and other special forces. These Sheffield gravity knives had smooth wood or textured plastic scales, but were otherwise identical in features and operation to the Type I Flieger-Kappmesser, with a locking gravity-deployed blade and a folding rigging spike or awl. In the hands of British SOE agents, the Sheffield gravity knife was considered to be a secondary combat weapon. In addition to the knife blade, SOE close combat instructors found that the folding rigging spike was useful for silent killing of sentries by opening the carotid artery on the neck. [7] [4]
Some folding or telescoping knives that can open their blades by force of inertia or gravity were not intended or advertised by the manufacturer to do so. Knives that will lock their blades open, but do not have any closed position lock device, are referred to as "false" gravity blades.
The illustration shows the internal parts of a 1960s Japanese import 'false' gravity knife. Other knives may be considered to be 'false' gravity knives, including certain lock-back and liner lock folding knives that will not lock a blade in both open and closed positions.
After the passage of the Switchblade Knife Act in the U.S. in 1958, it was discovered that some U.S. businesses were importing folding stiletto knives without spring mechanisms that did not have a pronounced blade heel (internal surface) in the pivot area allowing the longer 11 and 13 in (28 and 33 cm) bladed models to easily flick open. [3] Modern (post 1965) folding stilettos imported or distributed in the U.S. now have blade heels that are intentionally pointed and ratchet against the lockback mechanism, preventing inertia opening.
Other knives commonly mistaken for gravity knives include the automatic OTF knife, the switchblade and the butterfly knives (or balisong), the sliding knife, penny knife, and occasionally even common folding hunting knives such as the Buck 110 Folding Hunter. [8]
The 'conversion' gravity knife consists of a standard folding knife fitted with after-market modifications. [9] The knife pictured does not lock closed, and is thus classed as a 'false' gravity knife. It can still be opened manually without touching the toggle switch. The addition of the toggle, which is attached to an internal bellcrank-arm, will lift the lockback mechanism to allow the blade to swing more easily. [9]
In some countries, such as the United Kingdom, Canada, and in some U.S. states, a gravity knife is proscribed under the law as a prohibited weapon, with attendant criminal penalties. Other laws may criminalize the ownership, sale, importation, or carrying of a gravity knife upon one's person, either concealed or unconcealed. In the United States, some state criminal codes prohibit either the ownership or the carrying of gravity knives, either by name or by including a functional description of their opening mechanisms. Other state criminal codes bar gravity knives by redefining them variously as switchblades or butterfly knives. [3] [8] [10] Local jurisdictions including cities and counties may also restrict the ownership or carrying of gravity knives. [11]
In a few jurisdictions, such as Colorado [12] and New York City, [13] courts have periodically attempted to classify ordinary lock-blade folding knives with a blade that may be opened by centrifugal force (normally, using a flicking motion of the wrist) as a gravity knife, thus making the knife's owner subject to the same criminal penalties imposed for illegal possession of a gravity knife. [9] [14] The New York statute banning gravity knives has been declared "unconstitutionally vague" by a federal District Court in March 2019. [15] New York State legalized the possession of gravity knives on May 30, 2019 [16] but New York City retains its ban on public transport. [17] [18]
A utility knife is any type of knife used for general manual work purposes. Such knives were originally fixed-blade knives with durable cutting edges suitable for rough work such as cutting cordage, cutting/scraping hides, butchering animals, cleaning fish scales, reshaping timber, and other tasks. Craft knives are small utility knives used as precision-oriented tools for finer, more delicate tasks such as carving and papercutting.
A knife is a tool or weapon with a cutting edge or blade, usually attached to a handle or hilt. One of the earliest tools used by humanity, knives appeared at least 2.5 million years ago, as evidenced by the Oldowan tools. Originally made of wood, bone, and stone, over the centuries, in step with improvements in both metallurgy and manufacturing, knife blades have been made from copper, bronze, iron, steel, ceramic, and titanium. Most modern knives have either fixed or folding blades; blade patterns and styles vary by maker and country of origin.
The FG 42 is a selective-fire 7.92×57mm Mauser automatic rifle produced in Nazi Germany during World War II. The weapon was developed specifically for the use of the Fallschirmjäger airborne infantry in 1942 and was used in very limited numbers until the end of the war.
A switchblade is a pocketknife with a sliding or pivoting blade contained in the handle which is extended automatically by a spring when a button, lever, or switch on the handle or bolster is activated. Virtually all switchblades incorporate a locking blade, where the blade is locked against accidental closure when the blade is in the open position. It is unlocked by a mechanism that allows the blade to be folded and locked in the closed position.
A balisong, also known as a butterfly knife, fan knife or Batangas knife, is a type of folding pocketknife that originated in the Philippines. Its distinct features are two handles counter-rotating around the tang such that, when closed, the blade is concealed within grooves in the handles. A latch sometimes holds the handles together; typically mounted on the one facing the cutting edge. An exceptionally large balisong is called a balisword.
The Benchmade Knife Company is an American knife manufacturer based out of Oregon City, Oregon.
A stiletto is a specialized dagger with a long slender blade and needle-like point, primarily intended as a thrusting and stabbing weapon.
A pocketknife is a knife with one or more blades that fold into the handle. They are also known as jackknives (jack-knife), folding knives, EDC knife, or may be referred to as a penknife, though a penknife may also be a specific kind of pocketknife. A typical blade length is 5 to 15 centimetres.
Buck Knives is an American knife brand and manufacturer founded in Mountain Home, Idaho and now located in Post Falls, Idaho. The company has a long history through five generations of the Buck family from 1902 to the present day. Buck Knives primarily manufactures sport and field knives and is credited with inventing the "folding hunting knife" and popularizing it to such a degree that the term "buck knife" has become associated with folding lockback knives, including those made by other manufacturers.
A pantographic knife or paratrooper knife is a folding knife whose blade is opened by a unique scissors method. The blade has a slightly longer tang than a folding knife heel. The handle is symmetrically segmented and articulated to fold away on both sides to grip the longer tang. The manner is similar to a butterfly knife —with which it is often confused. Unlike the balisong knife handles that swing freely and independently, the pantographic knife uses a pantograph linkage to keep the handles aligned during opening and closing. The mechanism includes a collar that travels up the blade. The pantographic knife is very strong when compared to most other folding knife designs, being joined at several points and along several planes—this increases the force required to break the blade away from the handle. By enclosing the blade on both sides, double edged blades can be used.
A latch or catch is a type of mechanical fastener that joins two objects or surfaces while allowing for their regular separation. A latch typically engages another piece of hardware on the other mounting surface. Depending upon the type and design of the latch, this engaged bit of hardware may be known as a keeper or strike.
The Rampuri is an Indian gravity knife with a single-edged blade roughly 9 to 12 inches long. This includes both switchblade knives and also step-lock types. The name Rampuri comes from the town of Rampur, Uttar Pradesh. The royal bladesmiths of local Nawabs of Rampur started making knives after the popularization of firearms after the 18th century.
An assisted-opening knife is a type of folding knife which uses an internal mechanism to finish the opening of the blade once the user has partially opened it using a flipper or thumbstud attached to the blade.
Knife legislation is defined as the body of statutory law or case law promulgated or enacted by a government or other governing jurisdiction that prohibits, criminalizes, or restricts the otherwise legal manufacture, importation, sale, transfer, possession, transport, or use of knives.
Imperial Schrade Corp. was an American knife manufacturer of hunting knives, pocketknives, utility knives, and bayonets during the 20th and early 21st centuries. The consolidation of five forerunner companies, including its namesakes, the Imperial Knife Company, founded 1916, and the Schrade Cutlery Company, founded in 1904, Imperial Schrade manufactured its products in the United States and Ireland and sold through hardware stores, department stores, and on military bases. The original company's fortunes declined and in 2004 it entered into bankruptcy where all equipment and intellectual property was sold off to reimburse creditors. The name and intellectual property was bought by Taylor Brands and used for marketing purposes. As of 2016, these brands are owned by Smith & Wesson.
The Okapi is a ratchet-lock clasp or slipjoint knife originally produced in 1902 for export to Germany's colonies in Africa. The knife takes its name from the giraffe-like central African okapi.
An OTF Knife, also known as an out-the-front knife, sliding knife, telescoping knife, or angel blade, is a pocketknife with a blade that opens and closes through a hole in one end of the handle. This design contrasts with the majority of utility knives, which are either standard folding knives or are "fixed blade" sheath knives.
Columbia River Knife & Tool, Inc. (CRKT) is an American knife company established in 1994, and currently based in Tualatin, Oregon, United States. The company's president and sales executive is Rod Bremer and the finance executive is Peggy Bremer.
A fighting knife has a blade designed to most effectively inflict injury in close-quarters physical confrontations. The combat knife and the trench knife are examples of military fighting knives.
The Luftwaffe was the air force of Nazi Germany prior to and during World War II. Luftwaffe styles of uniform and rank insignia had many unique features between 1935 and 1945. By Hitler's decision on February 26, 1935, the Luftwaffe was to be officially the third branch of the Wehrmacht as of March 1, 1935. The new Luftwaffe was faced with the problem of uniforms, as they wanted a uniform distinct from those of the other two branches of the Wehrmacht and also wanted a clear differentiation in dress of military and civilian flyers.
{{cite journal}}
: Cite journal requires |journal=
(help){{cite book}}
: CS1 maint: location missing publisher (link){{cite journal}}
: Cite journal requires |journal=
(help)