Buck Knives

Last updated
Buck Knives
Company type Subsidiary
Industry Manufacturing
Founded1902;122 years ago (1902), in San Diego, California [1] [2]
FounderHoyt Buck
Headquarters Post Falls, Idaho, US
Key people
  • Al Buck (former CEO)
  • Chuck Buck, former chairman
  • CJ Buck (CEO and chairman)
  • Paul Bos
Products Knives
RevenueUS$80 million
Number of employees
320
Website buckknives.com

Buck Knives is an American knife brand and manufacturer founded in Mountain Home, Idaho and now located in Post Falls, Idaho. The company has a long history through five generations of the Buck family from 1902 [3] to the present day. Buck Knives primarily manufactures sport and field knives and is credited with inventing the "folding hunting knife" and popularizing it to such a degree that the term "buck knife" has become associated with folding lockback knives, including those made by other manufacturers.

Contents

History

Company origins

Hoyt H. Buck became a blacksmith's apprentice in Kansas in 1899 at the age of 10. [2] [4] He learned to make knives and at 13, in 1902, developed a method to heat-treat steel for hoes and other tools so that they would hold an edge longer. [2] Hoyt left Kansas in 1907 for the American northwest and eventually enlisted in the United States Navy. [2] He made his first knife in 1902 in Mountain Home, Idaho. [2] Hoyt made each knife by hand, using worn-out file blades as raw material. [5] Collectors call these early knives "four strikes," because each of the letters in BUCK was struck with an individual letter stamp. In 1961, marking was replaced by a one-piece stamp. [4]

When the United States entered World War II, the government asked the public for donations of fixed-bladed knives to arm the troops. [1] Upon learning that there were not enough knives for soldiers, Hoyt Buck bought an anvil, forge, and grinder to set up a blacksmith shop in the basement of his church. [1] Hoyt later explained, "I didn't have any knives [to offer], but I sure knew how to make them". [1]

After World War 2, Hoyt and his son, Al, moved to San Diego and set up shop as "H.H. Buck & Son" in 1947. [1] These early knives were handmade and more expensive than a typical mass-produced knife. Hoyt Buck made 25 knives a week until his death in 1949. [1] In the 1950s, the company began manufacturing on a much larger scale and marketed through dealers as opposed to direct mail. [6]

The Model 110

The Buck Model 110 Folding Hunter Buck 110 Folding Hunter (33685498063).jpg
The Buck Model 110 Folding Hunter
Buck 110 LT (FRN handle) Buck-110-LT.jpg
Buck 110 LT (FRN handle)

On April 18, 1963, two years after incorporating, the Buck board of directors authorized development of a new folding utility and hunting knife. [1] The new design featured a sturdy locking mechanism and a substantial clip point blade suitable for butchering and skinning large game. [1] This became the famous Buck Model 110 Folding Hunter. [1]

The Buck Model 110 has a 33⁄4–inch blade, a high-tension lock, and a low-pressure release; the handles are typically wood with bolsters of heavy-gauge brass. [1] Introduced in 1964, it was one of the first lockback folding knives considered strong enough to do the work of a fixed-blade knife. [7] Its debut revolutionized hunting knives, rapidly becoming one of the most popular knives ever made, [1] with some 15 million Model 110 knives produced since 1964. [7] [8] Before 1981, the specially heat treated stainless steel used was 440C, and from 1981 to 1992 the company used 425M steel. Since 1993, Buck has mostly used 420HC stainless steel for Model 110 blades, although CPM S30V steel has also been used for some production runs. Its design is one of the most imitated knife patterns in the world. [1]

In 2018, Buck introduced a new lightweight editions of the 110, [9] a thick-handled FRN (fiberglass reinforced nylon) version called the LT. The new 110 Folding Hunter LT should impress anybody who found the original 110’s 7.2 oz. too much to carry. Carrying the same classic lines and Bos heat treat 420HC steel but in a lightweight injection-molded chassis, the LT tips the scales at a stunning 2.1 oz.- a weight reduction of over 300%. It also keeps the price down.

Recent developments

In 1984, Buck introduced a survival knife with a hollow handle for storage and a 7.5 inch blade with a serrated spine and prongs so the knife could double as a grappling hook. [10] Dubbed the Buckmaster (Model 184), it was marketed to the military and fans of the Rambo films of the 1980s. [1] The Buckmaster was soon followed by the M9 Bayonet manufactured for the United States Army, with an initial order of 315,600. [1]

In 1992–1993, Buck introduced the Nighthawk, a fixed-blade knife with a 6.5 inch blade and a black handle made of Zytel for an ergonomic grip. [1] This knife (Best M9) was submitted to the United States Marine Corps for evaluation for use by the Marines. [11]

In 2000, due to a demand from major retailers to reduce prices, Buck opened a plant in China. Imports to the United States from this plant had reached a high of 30 percent at one time, [12] but have dropped to 13 percent with the majority of these knives going to large retailers as opposed to sporting goods stores or knife shops. [13]

In 2005, the company relocated to Post Falls, Idaho. [12] Leaders of the San Diego business community considered this move a blow to San Diego County's economic landscape and a symbol of the state of California's problems in attracting and keeping businesses. [12]

Buck Knives has collaborated with different custom knifemakers such as Tom Mayo, Mick Strider, [14] David Yellowhorse [15] and Rob Simonich. [16]

Buck Mayo Northshore 173 Buck-Mayo.jpg
Buck Mayo Northshore 173
Buck Strider SBT Police Advocate 887 Buck-Strider.jpg
Buck Strider SBT Police Advocate 887

Al and Chuck Buck were inducted into the Blade magazine Cutlery Hall of Fame at the 1982 and 1996 Blade Shows respectively in Atlanta, Georgia in recognition for the impact that their designs and company have made upon the cutlery industry. [17] Buck's heat treater, Paul Bos, who heat treats knives for other custom makers and production companies at Buck's facility, was inducted into the Hall of Fame in 2011.

Products

Buck's first successful folding lock-blade was introduced in 1964. [1] Folding lock-blade knives and "Buck Knife" thereby became strongly linked in the mind of the US public, and the Buck design was much imitated, so that in the United States a Buck knife can refer to any folding lock-blade design, even while Buck Knife is a trademark and not limited to folding lock-blades. [18]

Today, Buck products are produced in countries including Mexico (e.g. sheathes) and China.

See also

Related Research Articles

<span class="mw-page-title-main">Pocketknife</span> Knife that can be carried in a pocket

A pocketknife is a knife with one or more blades that fold into the handle. They are also known as jackknives (jack-knife), folding knives, EDC knife, or may be referred to as a penknife, though a penknife may also be a specific kind of pocketknife. A typical blade length is 5 to 15 centimetres.

<span class="mw-page-title-main">Strider Knives</span> American knife production company

Strider Knives, Inc. is a custom and production knifemaking facility headed by Mickey Ray Burger, founded and based in San Marcos, California.

<span class="mw-page-title-main">Ernest Emerson</span> American knifemaker and martial artist

Ernest R. Emerson is an American custom knifemaker, martial artist, and edged-weapons expert. Originally an engineer and machinist in the aerospace industry, Emerson became a knifemaker by producing knives for a martial arts class and making art knives early in his knifemaking career. In the 1980s he became better known for his combat knives and popularizing a style of knife known as the Tactical-folder.

Blade is a consumer magazine about knife collecting. The magazine is based in Appleton, Wisconsin.

<span class="mw-page-title-main">Cold Steel (company)</span> American knife and tool company

Cold Steel, Inc., is an American retailer of knives/bladed tools, training weapons, swords and other martial arts edged and blunt weapons. Founded in Ventura, California, the company is currently based in Irving, Texas, after an acquisition by GSM Outdoors in 2020. Cold Steel products are manufactured worldwide, including in the United States, Japan, Taiwan, India, Italy, China, and South Africa.

<span class="mw-page-title-main">W. R. Case & Sons Cutlery Co.</span> American manufacturer of knives

W.R. Case & Sons Cutlery Company is an American manufacturer of traditional pocket knives, fixed blades/sporting knives, kitchen knives, limited edition commemoratives and collectibles. The company originated in Little Valley, New York, around the turn of the 20th century, before relocating to its current home, Bradford, Pennsylvania, in 1905. The company's namesake, William Russell Case, first made knives with his brothers under the name Case Brothers Cutlery Company. His son, John Russell ("Russ") Case, worked as a salesman for his father's company before founding W.R. Case & Sons.

<span class="mw-page-title-main">Sebenza</span> Folding pocket knife

The Sebenza is a folding pocket knife manufactured by Chris Reeve Knives of Boise, Idaho. It is constructed with a stainless steel blade and titanium handle. Its handle functions as the lock mechanism similar in concept to the Walker linerlock differing in that the handle itself forms the lock bar which holds the blade open. This mechanism was invented by Chris Reeve, and is called the Reeve Integral Lock (R.I.L). It is also commonly referred to as the Framelock, and is one of the most widely implemented locking systems in the folding knife industry, where lock strength and reliability is a product requirement. The name Sebenza is derived from the Zulu word meaning "Work," a tribute to Mr. Reeve's South African origins.

<span class="mw-page-title-main">Ek Commando Knife Co.</span> American combat knife brand produced by several different companies

Ek Commando Knife Co. or Ek Knives is an American combat knife brand produced by several different companies since the original founded by John Ek in 1941. In May 2014 the Ek brand was purchased by Ka-Bar, which began selling its versions of Ek knife designs in 2015. Although not officially issued gear, Ek Knives have seen use by US forces in six major conflicts: World War II, the Korean War, the Vietnam War, the Gulf War, both wars in Afghanistan and the Iraq War. Ek Knives manufactures Bowie-style blades, daggers, and a Fairbairn-Sykes MkII. President Franklin Delano Roosevelt, Clark Gable, and General George S. Patton have been identified as Ek knife owners.

<span class="mw-page-title-main">Mercator K55K</span> German-made pocket knife

The Mercator K55K is a type of pocketknife produced in Germany since around 1867. Mercator knives were primarily produced by Hy. Kauffmann, which was operational from 1856 to 1995. The Mercator K55K knife is still produced in Germany by Mercator, now a division of Otter-Messer.

Chris Reeve Knives is an American knife manufacturing corporation with international sales and distribution headquartered in Boise, Idaho, that designs, develops, and sells folding pocket knives and fixed-blade knives. Its products include the Sebenza, Inkosi, Umnumzaan, TiLock, Mnandi folding knives, Impinda slip joint, and the Green Beret, Pacific, Professional Soldier, Nyala, and Sikayo fixed blade knives. Chris Reeve Knives' industry contributions include the Integral Lock, contributions to the blade steels CPM-S30V and CPM-S35VN, and has won Blade Magazine's Blade Show Manufacturing Quality Award 15 times. Their motto is Think Twice, Cut Once.

<span class="mw-page-title-main">CQC-6</span> Folding Knife

The CQC-6 or Viper Six is a handmade tactical folding knife with a tantō blade manufactured by knifemaker Ernest Emerson. Although initially reported as the sixth design in an evolution of fighting knives and the first model in the lineup of Emerson's Specwar Custom Knives, Emerson later revealed that the knife was named for SEAL Team Six. It has a chisel-ground blade of ATS-34 or 154CM stainless steel and a handle made of titanium and linen micarta. The CQC-6 is credited as the knife that popularized the concept of the tactical folding knife.

Emerson Knives, Inc. is an American company that produces knives and related products. It was founded in 1996 by custom knifemaker Ernest Emerson in an effort to mass-produce his folding knife designs for the U.S. Military and collector markets.

William Wales Scagel was an American knifemaker whose style had a profound impact on the cutlery trade, influencing it for over 100 years.

The American Bladesmith Society, or ABS, is a non-profit organization composed of knifemakers whose primary function is to promote the techniques of forging steel blades. The ABS was founded by knifemaker William F. Moran, who came up with the concept in 1972 when he was Chairman of the Knifemakers' Guild; the following year, he introduced Damascus steel blades at an annual show. In 1976, he incorporated the organization, and it received non-profit status in 1985.

James Buel Lile, known as Jimmy Lile and "The Arkansas Knifesmith", was an American knifemaker from Russellville in Pope County, Arkansas, who made the Rambo Knife for the films First Blood and Rambo: First Blood Part II. As a knifemaker Lile served as a president of the Knifemakers' Guild and on the board of directors of the American Bladesmith Society.

Gil Hibben is an American custom knifemaker from Wyoming who is based in La Grange, Kentucky. Hibben designed the first line of Browning hunting knives in 1968, the American Kenpo Knife for Ed Parker, and the Rambo Knife for the 1988 film Rambo III and the 2008 film Rambo. Hibben's "Fantasy Knives" have been used in over 37 films and television shows, particularly science fiction, earning him the title "Klingon Armorer" from the Star Trek franchise. Hibben currently serves as a President of the Knifemakers' Guild, a post he has held for fourteen years.

<span class="mw-page-title-main">Michael Walker (knifemaker)</span> American knife maker

Michael Leon Walker is an American custom knifemaker and sculptor based in Taos, New Mexico. Walker is the inventor of more than 20 different knife mechanisms including the Walker Linerlock for which he secured a trademark in 1980.

Walter Wells "Blackie" Collins was an American knife maker who designed and popularized the assisted opening mechanism and various automatic knife designs within the art of knifemaking. He is cited by other knifemakers and collectors as one of the most innovative knife designers in the world and was an author and the founder of what became Blade Magazine. Collins died July 20, 2011, in a motorcycle accident near North, South Carolina.

Robert G. Terzuola is an American knife maker who popularized the type of knife known as the tactical folding knife.

The Blade Show is an annual tradeshow for the cutlery industry. It is the largest event of its type in the world. The show is owned by Caribou Media Group and is hosted by Blade Magazine. The event has over 1,000 exhibitors and is the host for inductees into the annual Cutlery Hall of Fame. It also hosts the annual Blade HQ Balisong Competition, BladeSports International Cutting World Championships, Blade University, Knife of the Year Awards, and a variety of knifemaking classes and demos. The event takes place every year over the course of several days and brings in knifemakers and knife companies from all parts of world.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 "The History Of The 99-Year-Old Buck Knife". Popular Mechanics. 178 (6). 1 June 2001. Archived from the original on 10 February 2007. Retrieved 17 November 2008.
  2. 1 2 3 4 5 Pacella, Gérard (2002). 100 Legendary Knives. Krause Publications. p. 126. ISBN   0-87349-417-2.
  3. ↑ "Buck Knives finds success through 'lean manufacturing' | The Spokesman-Review". www.spokesman.com. Retrieved 2024-08-19.
  4. 1 2 Price, C. Houston; Mark D. Zalesky (2008). The Official Price Guide to Collector Knives, 15th edition. House of Collectibles. pp. 164–166. ISBN   978-0-375-72280-6.
  5. ↑ Ables, Tom (1991). The Story of Buck Knives a Century of Knifemaking. Buck Knives. p. 120. ASIN   B000M155X4.
  6. ↑ "Obituaries: Alfred C. Buck, Knife Manufacturer, 80" . The New York Times . 3 April 1991. Archived from the original on November 8, 2012. Retrieved 17 November 2008.
  7. 1 2 Petzal, David E. (June 1, 2008). "The 20 Best Knives Ever Made: The Buck Model 110". Field & Stream . 63 (2): 73.
  8. ↑ "1 million, and still cutting: Buck Knives hits landmark production number this year", Coeur D'Alene Press, 30 October 2010: "Buck produced over 1 million Model 110 knives in 2010 alone."
  9. ↑ "Buck Unveils New for 2018 Knives | KnifeNews.com". KnifeNews. 2017-12-15. Retrieved 2024-11-28.
  10. ↑ Jackson, Mark (1987). "Survival Knives". Black Belt. 25 (2). Active Interest Media, Inc.: 40–48.
  11. ↑ Dick, Stephen (1995), Blades of the Combat Swimmers, Tactical Knives, vol. 1, no. 2, p. 68-73
  12. 1 2 3 Krueger, Anne (26 March 2006). "A cut above: Buck Knives enjoying a better business life in Idaho than El Cajon". Signs on San Diego. Archived from the original on September 9, 2006. Retrieved 17 November 2008.
  13. ↑ "Buck Knives keeps its knifemaking legacy in family". The Spokesman-Review. 2011-10-23. Archived from the original on October 28, 2011. Retrieved 2012-01-25.
  14. ↑ Markel, Paul (2006). "Practical Tacticals: Buck's Strider Folders". Tactical Knives Magazine. 13 (5): 76.
  15. ↑ Price, C. Houston; Mark D. Zalesky (2008). The Official Price Guide to Collector Knives, 15th edition. House of Collectibles. pp. 493–494. ISBN   978-0-375-72280-6.
  16. ↑ Winter, Butch (2003), "Collaborations with Custom Knifemakers", Sporting Knives 2003: 154–161, ISBN   0-87349-430-X
  17. ↑ "Mr. SpeedSafe Joins the Club". Blade Magazine. 2008-07-22. Archived from the original on 2008-08-13. Retrieved 2008-07-30.
  18. ↑ AEPMA Trademark List Archived October 1, 2006, at the Wayback Machine
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.