In 1867, William Landsborough investigated the Norman River area to select a port site to serve the pastoral stations south of the Gulf of Carpentaria. With him was George Phillips who shortly thereafter surveyed the chosen site of Normanton. Phillips later supervised the construction of the Normanton to Croydon Railway, and retained an interest in the area, serving as Member of the Queensland Legislative Assembly for Carpentaria in the 1890s.[3]
Bush camp on the Croydon to Normanton railway line.
A railway line between Normanton and Cloncurry had been discussed as early as 1883 and was approved by Queensland Parliament in 1886. This was a difficult stretch for carriers and a rail link would have been valuable to pastoral stations in the area and was planned to serve the Cloncurry Copper Mine. At that time, it was intended to eventually link the new line from Normanton with the Great Northern Railway at Charters Towers to provide access to the port of Townsville.[3][4][5]
However in November 1885, a major gold strike was reported at Belmore pastoral station, 145 kilometres (90mi) east of Normanton and by the end of 1886, the population of the Croydon field was 2,000, rising to 6,000 in the following year. Transportation was a major problem and access to this field became more important than the link to Cloncurry. It was decided to divert the line to Croydon.[3]
The line was technically innovative, in response to the terrain and conditions. The country was flat but difficult for conventional railway tracks due to flooding, lack of suitable timber for sleepers and termite attack. In 1884 Phillips patented a system for taking railways across such country which utilised special U-section steel sleepers laid directly on the ground. During floods the line could be submerged without washing out the ballast and embankments normally used, so that it could quickly be put back into service when the waters subsided. The steel sleepers were also impervious to termite attack, and although initially more expensive than timber sleepers, were cheaper to lay and maintain. The bridges along the line were also designed to be submersible. This system was particularly suited to the Gulf country and was specified for the Normanton to Croydon line with Phillips engaged to supervise the construction.[3]
Tenders were called in July 1887. The first line laid was between the Normanton railway station site and the Margaret and Jane landing at Normanton wharf to bring materials from ships to the railway station site. That section of railway line has not survived.[3]
Some problems were encountered with constructing the line because of the difficulty of maintaining a constant and adequate supply of Phillips sleepers. They were cast at the Toowoomba Foundry at Woolloongabba in Brisbane and also in Glasgow, but to keep construction going, timber sleepers were used on some sections and timber was also used for some bridges, originally designed to be made of steel.[3]
Gulflander at Normanton, travelling on the curved steel sleepers, 2011
The construction method involved clearing a three-metre wide band ahead of the rail which was stumped, ploughed, harrowed, rolled and lightly ballasted. The U-shaped sleepers were then laid on this prepared surface and the rail attached to them by special clips. The construction train then passed over them forcing the U shape down into the ground and depressing the sleepers for above half their depth. Soft spots were then packed. The finished rails were intended to be 25 to 50 millimetres (0.98 to 1.97in) above the surface. However, in practice the sleepers became more deeply embedded with time.[3]
The buildings for the terminus at Normanton consisted of a station with a large arched carriage shade and a goods shed, all constructed of corrugated iron on timber frames, although the framework for the station building was used to considerable decorative effect. Because the line was isolated, a range of maintenance buildings and facilities such as machine shops, blacksmith and carpenters shops were added over the next few years. At the other end of the line, Croydon had more modest goods and locomotive sheds and a station with a roofed section over 2 tracks. In 1895, a railway water reserve was proclaimed on the flooded Bird-in-the-Bush shaft on True Blue Hill at Croydon.[3]
Most of the timber sleepers on the line were soon replaced because of termite damage, although one section over salt pan used timber rather than metal to prevent corrosion. A number of low-level bridges form an important part of this line and were also intended to be metal. In 1900, two bridges at Glenore Crossing which had been built in timber in 1890 were replaced by low-level concrete and steel bridges. That at Glenore Crossing number 3 reused fishbelly plate girders from the original 1876 Albert Bridge in Brisbane as main spans. Original metal and concrete bridges survive and those at 80 Mile Creek and Belmore Creek at Croydon are good examples of their type.[3]
Initially the line carried perishables, mail and passengers, and goods like building materials and merchandise. It also ferried firewood for mine boilers and batteries as the land was progressively cleared. During the late 1890s, special trains were run for picnics at most of the water holes along the line, particularly the Blackbull lagoon and weekend excursions from Normanton to Croydon or Golden Gate. The Golden Gate mine, some 4 miles (6.4km) west of Croydon and on the railway line, was first mined in 1887. It enjoyed prosperity from about 1895 to 1901, and the Golden Gate township itself had 1500 inhabitants. A service between Croydon and Golden Gate on the weekends was introduced in 1902.[3]
However, the goldfield at Croydon did not sustain its initial success. By the early 1900s, its output had dropped considerably and after World War I when widespread mining diminished, it was obvious that the field would not recover. The railway had only run at a profit between 1898 and 1902 and traffic, never high, steadily declined. The line stayed open as a community service and as a vital link during the wet season. This was largely because the Phillips system worked well and the track could be put back into use almost immediately after flooding, whereas roads stayed impassable for much longer. Fortunately, the track took less maintenance than standard track and in the early 1920s the number of staff was considerably reduced to reduce maintenance costs.[3]
To cut costs, and because the supply of suitable water had always been a problem, the first railmotor, a Panhard, was introduced in 1922. By 1929, steam locomotives had been completely phased out. In the 1930s, all-weather roads (now the Gulf Developmental Road) made the railway less important, but until the late 1960s, the rail remained a vital transport link in the area. By 1974, the line was under the threat of closure, earning just $3,000 in revenue but costing approximately $64,000 to maintain.[8]
Since then, the line has functioned largely as a tourist attraction. In 1982, a railmotor was restored and named the "Gulflander", making a weekly trip to Croydon returning the next day with a shorter special on other days. Stops are at Clarina 11 miles (18km), Glenore 14 miles (23km), Haydon 32 miles (51km), East Haydon 38 miles (61km), Blackbull 57 miles (92km), and on to Croydon 94 miles (151km). There is often also a photo stop at the remains of the Golden Gate mine 92 miles (148km).[3]
Not all of the buildings have survived; the station at Croydon being destroyed by a storm in 1969. The tank there was demolished in 1972, that at Haydon in 1980, and the blacksmiths shop and workshops in Normanton were sold and demolished in 1980.[3] A new station building was built in 2005 similar to the original station.
While the rest of the isolated Queensland Railways lines were gradually joined in the late 19th and early 20th century, the Normanton to Croydon line remained isolated. The nearest part of the Queensland Rail network is the Etheridge line190 kilometres (120mi) away at Forsayth.[4]
Description
Normanton railway station, 2010
The Normanton to Croydon railway line runs 151 kilometres (94mi) in a roughly south-east direction from Normanton to Croydon, in the Gulf Country of North-west Queensland. The line, carried for most of its length on Phillips patent steel sleepers, runs over level country and crosses a number of streams by low level bridges. It has stations at each end of the line with several stopping places in between.[3] The buildings at Normanton railway station are located at the edge of the town on a very level site which makes the buildings stand out sharply against the skyline. The surviving buildings comprise the station building with its attached carriage shade, the goods shed, water tank, vertical boiler and some relatively modern buildings such as the Officer in Charge's house at the Landsborough Street crossing.[3]
Normanton railway station entrance, 2010
The station building is rectangular in plan with offices on either side of a central passage and is constructed of corrugated iron lining a timber frame set on a slab. The pattern formed by the frame and cross braced studs has been used to create a decorative effect. The hipped roof is clad in corrugated iron, as is the roof of the verandah which stretches along the sides and front of the station, where a small gable in the verandah roof marks the entrance. From the platform side of the building arches a huge steel framed carriage shade supported with decorated cast ironcolumns made by the Toowoomba Foundry that supplied some of the steel sleepers. It extends over three tracks and has a continuous ridge vent. The bow string trusses are exposed at each end of the arcade and a scalloped sheet metal fringe edges the curved roof at each end of the structure.[3]
Gulflander train in the carriage shed, Normanton railway station, 1984
The goods shed faces the station across further lines and is a large building, clad and roofed with corrugated iron. The roof extends to provide awnings to the sides, one of which has been built in. It has an internal loading platform and the outside loading platform carries a 5 long tons (5.1t)Ransomes and Rapier of London crane dating from about 1902.[3]
The water tank is located near the site of the engine shed and is a single tier tank on a cast iron stand manufactured by Haslam and Co Ltd, of Derby. The site of the workshops consist of the footings, base walls, slabs and inspection pits. A vertical boiler by A. Overend & Co survives at the southern end of the fitting shop area. There is a modern engine shed which houses the rail motor. Also scattered through the yards are the remains of several locomotives, tenders and section of line and sleepers.[3]
The station complex at Blackbull comprises a skillion roofed 1966 shelter shed which, although relatively modern, utilises the timber frame and corrugated iron cladding typical of buildings on this line. An interpretive centre has been established in the early 20th century railway workers' quarters. These are also skillion roofed and are corrugated iron clad with top hinged, steel clad shutters. There is an 1890 McKenzie and Holland elevated standard single tier cast iron water tank on a cast iron stand adjacent to a bore at the trackside. A mid twentieth century house recently moved to the site, modern shade structure and toilet block make up the facilities.[3]
Croydon railway station, 2011
Croydon railway station is now a simple building clad in corrugated iron with a low pitched roof which does not resemble the station destroyed in 1969, but appears to have reused some of the materials. A set of Avery scales are against the outside wall at the end of the building and a cylindrical water tank is adjacent. Beyond the tank is an 1887 Saxby and Farmer lever, believed to be rare.[3]
The complex also contains also a set of quarters similar in appearance to those at Blackbull with detached kitchen and shower annexes to the rear. Croydon station also retains some original equipment such as a Ransomes and Rapier crane, as at Normanton. This is located beside the line at a short distance from the station building and near the former goods shed, the concrete slab of which survives. A loading ramp constructed of metal sleepers and rails and filled with earth also remains, though in a ruinous condition. The tower section of a windmill made from rails is also in the yards and locomotive parts are scattered about.[3]
Rolling stock
Because of the isolated nature of the line, redundant rolling stock tended to be discarded at Normanton station rather than scrapped.[4][9]
AEC petrol railmotor RM32, on display at Normanton Railway Station
AEC petrol railmotor RM60, operational at Normanton
AEC petrol railmotor RM74 converted to diesel, on display at Redlands City Museum, Cleveland, Queensland.
QGR Diesel railmotor RM93, Operational at Normanton
Walkers Diesel Locomotive DL4, Operational at Normanton
Heritage listing
Normanton to Croydon Railway Line was listed on the Queensland Heritage Register on 21 October 1992 having satisfied the following criteria.[3]
The place is important in demonstrating the evolution or pattern of Queensland's history.
The Normanton to Croydon railway illustrates the way in which the rail system in Queensland developed as a series of isolated lines which connected ports to inland resources. It also demonstrates the short lived importance that goldfields, such as that at Croydon, might have.[3]
The place demonstrates rare, uncommon or endangered aspects of Queensland's cultural heritage.
The Brisbane to Cairns railway connected all independent railways running from ports inland apart from Normanton and Cooktown, which closed in 1962. The Normanton to Croydon line is therefore the last isolated section of the Queensland Railways to remain in use. It is also the only complete line to have been constructed using the Phillips patented sleeper system, which is still in working order.[3]
The place has potential to yield information that will contribute to an understanding of Queensland's history.
Because of its isolation, extensive workshop facilities were provided and locomotives and rolling stock were retained when obsolete. Although some have now been removed, the line retained much of its individuality and can provide information on the way in which such an isolated line was maintained and the technology used.[3]
The place is important because of its aesthetic significance.
The buildings connected with the railway make skilful use of vernacular materials in a harsh environment The Normanton station in particular is a well executed and interesting example of late nineteenth century railway architecture in Queensland. In a flat and open landscape, its scale, form and materials make the terminus a striking and important component of the townscape of Normanton.[3]
The place is important in demonstrating a high degree of creative or technical achievement at a particular period.
The railway line itself, with its use of low level submersible track and bridges and Phillips patented steel sleepers, was an important technical innovation designed for Queensland conditions which has lasted in use with a low level of maintenance for over a hundred years, proving its viability in these conditions.[3]
The place has a special association with the life or work of a particular person, group or organisation of importance in Queensland's history.
The railway has strong associations with the life and work of George Phillips, who helped to explore and survey the area, served for several years as its Parliamentary representative and designed and supervised the building of the railway. It is also associated with James Gartside who prepared the designs for the Normanton terminus buildings under Phillips' direction.[3]
Archer Park Railway Museum is a heritage-listed former railway station and now transport museum at Denison Street, Rockhampton, Rockhampton Region, Queensland, Australia. It was built from 1897 to 1908. It was known as Archer Park railway station and Rockhampton Central railway station. It was added to the Queensland Heritage Register on 21 October 1992.
Valley Heights railway station is a heritage-listed railway station located on the Main Western line in Valley Heights, in the City of Blue Mountains local government area of New South Wales, Australia. It was designed and built by NSW Government Railways. It is also known as Valley Heights Railway Station and Locomotive Depot and The Valley. The property was added to the New South Wales State Heritage Register on 2 April 1999.
The Gulflander is a passenger train operated by Queensland Rail on the isolated Normanton to Croydon line in the Gulf Country of northern Queensland, Australia.
Toowoomba railway station is a heritage-listed railway station on the Western line at Russell Street, Toowoomba, Toowoomba Region, Queensland, Australia. It serves the city of Toowoomba, which is the junction for the Western, Main and Southern lines. The station has one platform with a passing loop, opening in 1867. It was designed by FDG Stanley and built in 1873 by R. Godsall. It was added to the Queensland Heritage Register on 21 October 1992.
Maryborough railway station is a heritage-listed railway station at Lennox Street, Maryborough, Fraser Coast Region, Queensland, Australia. It is on the North Coast line serving the city of Maryborough. It was designed by Chief Engineer of the Queensland Railways Department and built from 1878 to 1890 by John Roddam & John Walker. It was added to the Queensland Heritage Register on 21 October 1992.
The Tenterfield railway station is a heritage-listed closed railway station and now railway museum located on the Main Northern line, Tenterfield, Tenterfield Shire, New South Wales, Australia. It served the town of Tenterfield and opened on 1 September 1886 when the line was extended from Glen Innes. It was the terminus of the line until it was extended to Wallangarra on 16 January 1888. The railway station was designed by William Murray under the direction of John Whitton, the Chief Engineer of NSW Government Railways, and built during 1886. It is also known as Tenterfield Railway Station group. The property was added to the New South Wales State Heritage Register on 2 April 1999. The station has one platform with two loops.
Warwick railway station is a heritage-listed railway station on the Southern railway line in Warwick, Southern Downs Region, Queensland, Australia. It was built from c. 1881 to 1910s. It was added to the Queensland Heritage Register on 24 September 1999.
Longreach railway station is the terminus station of the Central Western line, serving the town of Longreach, Longreach Region, Queensland, Australia. It is on the Landsborough Highway. It was built from 1887 to 1917. It was added to the Queensland Heritage Register on 12 December 2005.
Rockhampton Railway Workshops is a heritage-listed railway workshop at 380 Bolsover Street, Depot Hill, Rockhampton Region, Queensland, Australia. It was built from 1915 to 1953. It is also known as Rockhampton Roundhouse. It was added to the Queensland Heritage Register on 21 August 1992.
The Cairns-to-Kuranda Railway is a heritage-listed railway line from the Cairns Region to the Shire of Mareeba, both in Queensland, Australia. It commences at Redlynch, a suburb of Cairns and travels up the Great Dividing Range to Kuranda within the Shire of Mareeba on the Atherton Tableland. It was built from 1913 to 1915 by Queensland Railways. Components of it include Stoney Creek Bridge, the Rail Bridge over Christmas Creek, Kuranda railway station, and Surprise Creek Rail Bridge. It was added to the Queensland Heritage Register on 21 August 1992. The railway is used to operate a tourist rail service, the Kuranda Scenic Railway. It forms part of the Tablelands railway line.
Cairns Plywood Pty Ltd Sawmill Complex is a heritage-listed sawmill at 25 – 33 Eacham Road, Yungaburra, Tablelands Region, Queensland, Australia. It was built from 1910 to the 1980s. It is also known as Cairns Plywood Limited, Eacham Sawmills, and Williamson Brothers Sawmill. It was added to the Queensland Heritage Register on 21 October 1992.
The Etheridge railway line is a heritage-listed railway line between Mount Surprise and Forsayth, both in the Shire of Etheridge, Queensland, Australia. It includes Mount Surprise railway station, Einasleigh railway station, Wirra Wirra railway station and Forsayth railway station. Etheridge railway line was added to the Queensland Heritage Register on 16 February 2009.
Croydon Hospital Ward is a heritage-listed former hospital at Sircom Street, Croydon, Shire of Croydon, Queensland, Australia. It was built in 1894. It is also known as Croydon State Emergency Services Building. It was added to the Queensland Heritage Register on 21 October 1992.
Croydon railway station is a heritage-listed railway station at Helen Street, Croydon, Shire of Croydon, Queensland, Australia. It was built from c. 1888 to c. 1891. It is on the Normanton to Croydon railway line. It was added to the Queensland Heritage Register on 21 October 1992.
Normanton railway station is a heritage-listed railway station at Matilda Street, Normanton, Shire of Carpentaria, Queensland, Australia. It was built in 1889. It was added to the Queensland Heritage Register on 21 October 1992. It serves as a tourist attraction and station for the Gulflander line.
Burns Philp Building is a heritage-listed former warehouse at the corner of Landsborough Street and Caroline Street, Normanton, Shire of Carpentaria, Queensland, Australia. It was built by Andrew Murphy. It was added to the Queensland Heritage Register on 14 October 2011.
Aramac Tramway Museum is a heritage-listed former tramway station and now a museum at Boundary Street, Aramac, Barcaldine Region, Queensland, Australia. It was built from 1912 to 1913. It is also known as Aramac Tramway Station. It was added to the Queensland Heritage Register on 26 November 1999.
Blackbull is a rural locality in the Shire of Croydon, Queensland, Australia. In the 2016 census Blackbull had a population of 3 people.
The Cooma railway station is a heritage-listed former railway station on the Bombala railway line at Bradley Street, Cooma, Snowy Monaro Regional Council, New South Wales, Australia. The original design of the station was attributed to John Whitton. The station complex was built from 1889 to 1950. The Cooma Monaro Railway is based at the station and is opening a heritage railway museum in the restored station building in December 2022. The station was added to the New South Wales State Heritage Register on 2 April 1999.
The Eskbank railway station is a heritage-listed former locomotive depot and railway station and now community group venue adjacent to the Main Western Line at Lithgow, City of Lithgow, New South Wales, Australia. It was designed by the New South Wales Government Railways and the station building was built by Goodsell & Wright, as a contractor. It is also known as Eskbank Railway Station group and Lithgow Goods Station/ Lithgow Site S1. The property was added to the New South Wales State Heritage Register on 2 April 1999.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
