QF 4-inch naval gun Mk I – III

Last updated
Ordnance QF 4-inch gun Mk I, II, III
AIF troops with QF 4 inch Mk I-III gun 1914 AWM P00326.017.jpeg
Australian troops with gun on a transport ship, circa. November 1914
Type Naval gun
Coast defence gun
Place of originUnited Kingdom
Service history
In service1896 - 1920 [note 1]
Used by British Empire
Wars Boxer Rebellion,
World War I
Production history
Designed1895
Specifications
Mass2,912 pounds (1,321 kg) barrel & breech
Barrel  length160 inches (4.064 m) bore (40 cal); 165.35 inches (4.200 m) total

Shell Separate-loading QF 25 pounds (11.34 kg) Common pointed or Lyddite
Calibre 4-inch (101.6 mm)
Breech Single-motion screw
Muzzle velocity 2,300 feet per second (700 m/s) [1]
Maximum firing range9,000 yards (8,200 m) [2]

The QF 4-inch gun Mks I, II, III [note 2] were early British QF (quick-firing) naval guns originating in 1895. They all had barrels of 40 calibres length.

Contents

The gun was intended to be a more powerful alternative to the quick-firing 3-inch QF 12-pounder gun, and a faster-firing replacement for the BL 4-inch gun.

It was mounted on the following ships :

Its 25-pound (11 kg) shell proved insufficiently powerful to make it much of an improvement on the 12-pounder. From 1907 onwards it was succeeded in its class on new warships by the BL 4 inch gun Mk VIII, which fired a 31-pound (14 kg) shell.

Coast Defence gun

From 1906 a number of Mk III guns were transferred from the Royal Navy for use as coast defence guns around the United Kingdom, and remained until 1939. [3]

In 1918 three guns were in service at Dover Garrison and eight at Forth Garrison. [4]

World War I land service

On 20 September 1914 the British cruiser HMS Pegasus was sunk by SMS Königsberg in Zanzibar harbour. Her 8 QF 4-inch Mk III guns were recovered and used ashore in the East African campaign. Some were used as coast defence guns at Zanzibar and Mombasa. Two guns, and from 11 February 1916, three guns, were used by 10th Heavy Battery manned by the Royal Marines, mounted on improvised field carriages and towed by Packard lorries, supported by six REO lorries carrying ammunition. [5]

Surviving guns

The 4-inch QF gun on Hirta looking towards Dun Gun Dun St Kilda.jpg
The 4-inch QF gun on Hirta looking towards Dùn

See also

Notes

  1. Remaining ships were all scrapped or decommissioned following WWI, by 1921 at latest
  2. I.e. Mark 1, 2 and 3. Britain used Roman numerals to denote Marks (models) of ordnance until after World War 2. Hence this article describes the first three models of British QF 4-inch guns.

Related Research Articles

QF 13-pounder gun Light field gun

The Ordnance QF 13-pounder (quick-firing) field gun was the standard equipment of the British and Canadian Royal Horse Artillery at the outbreak of World War I.

QF 13-pounder 9 cwt Anti-aircraft gun

The 13 pounder 9 cwt anti-aircraft gun became the standard mobile British anti-aircraft gun of the World War I era, especially in theatres outside Britain.

BL 6-inch Mk VII naval gun Naval gun

The BL 6-inch gun Mark VII was a British naval gun dating from 1899, which was mounted on a heavy traveling carriage in 1915 for British Army service to become one of the main heavy field guns in the First World War, and also served as one of the main coast defence guns throughout the British Empire until the 1950s.

QF 4.7-inch Mk I – IV naval gun Naval gun

The QF 4.7-inch Gun Mks I, II, III, and IV were a family of British quick-firing 4.724-inch (120 mm) naval and coast defence guns of the late 1880s and 1890s that served with the navies of various countries. They were also mounted on various wheeled carriages to provide the British Army with a long range gun. They all had a barrel of 40 calibres length.

QF 3-inch 20 cwt Anti-aircraft gun

The QF 3 inch 20 cwt anti-aircraft gun became the standard anti-aircraft gun used in the home defence of the United Kingdom against German airships and bombers and on the Western Front in World War I. It was also common on British warships in World War I and submarines in World War II. 20 cwt referred to the weight of the barrel and breech, to differentiate it from other 3 inch guns. While other AA guns also had a bore of 3 inches (76 mm), the term 3 inch was only ever used to identify this gun in the World War I era, and hence this is what writers are usually referring to by 3 inch AA gun.

BL 15-pounder gun Field gun

The Ordnance BL 15-pounder, otherwise known as the 15-pounder 7 cwt, was the British Army's field gun in the Second Boer War and some remained in limited use in minor theatres of World War I. It fired a shell of 3-inch diameter with a maximum weight of 15 pounds (6.8 kg), hence its name which differentiated it from its predecessor '12-pounder' 3-inch gun which fired shells weighing only 12.5 pounds (5.7 kg).

QF 12-pounder 8 cwt gun Light field gun

The Ordnance QF 12-pounder 8 cwt was a Royal Navy "landing gun" intended for navy use ashore. "8 cwt" refers to the weight of the gun and breech, approximately 8 cwt = 8 x 112 lb (51 kg) = 896 lb (406 kg). This was how the British often differentiated between guns of the same calibre or weight of shell. This gun had a short barrel and was of relatively low power compared to the 12 pounders of 12 and 18 long cwt, although it fired the same shells.

BL 12-pounder 6 cwt gun Light field gun

The Ordnance BL 12-pounder 6 cwt was a lighter version of the British 12-pounder 7 cwt gun, used by the Royal Horse Artillery in the late 19th and early 20th centuries.

QF 6-inch naval gun Naval gun

The QF 6-inch 40 calibre naval gun (Quick-Firing) was used by many United Kingdom-built warships around the end of the 19th century and the start of the 20th century.

QF 12-pounder 12 cwt naval gun Naval gun

The QF 12-pounder 12-cwt gun was a common, versatile 3-inch (76.2 mm) calibre naval gun introduced in 1894 and used until the middle of the 20th century. It was produced by Armstrong Whitworth, Elswick and used on Royal Navy warships, exported to allied countries, and used for land service. In British service "12-pounder" was the rounded value of the projectile weight, and "12 cwt (hundredweight)" was the weight of the barrel and breech, to differentiate it from other "12-pounder" guns.

QF 6-pounder Hotchkiss

The Ordnance QF Hotchkiss 6 pounder gun Mk I and Mk II or QF 6 pounder 8 cwt were a family of long-lived light 57 mm naval guns introduced in 1885 to defend against new, small and fast vessels such as torpedo boats and later submarines. There were many variants produced, often under license which ranged in length from 40 to 58 calibers, but 40 caliber was the most common version.

QF 12-pounder 18 cwt naval gun Naval gun, Coastal defence

The QF 12 pounder 18 cwt gun was a 3-inch high-velocity naval gun used to equip larger British warships such as battleships for defence against torpedo boats. 18 cwt referred to the weight of gun and breech, to differentiate the gun from others that also fired the "12 pound" shell.

QF 4-inch naval gun Mk V Naval gun

The QF 4 inch Mk V gun was a Royal Navy gun of World War I which was adapted on HA mountings to the heavy anti-aircraft role both at sea and on land, and was also used as a coast defence gun.

QF 1-pounder pom-pom Autocannon

The QF 1 pounder, universally known as the pom-pom due to the sound of its discharge, was a 37 mm British autocannon, the first of its type in the world. It was used by several countries initially as an infantry gun and later as a light anti-aircraft gun.

QF 6-pounder Nordenfelt Naval gun

The QF 6 pounder Nordenfelt was a light 57 mm naval gun and coast defence gun of the late 19th century used by many countries.

BL 9.2-inch Mk IX – X naval gun Naval gun

The BL 9.2-inch Mk IX and Mk X guns were British breech loading 9.2-inch (234 mm) guns of 46.7 calibre, in service from 1899 to the 1950s as naval and coast defence guns. They had possibly the longest, most varied and successful service history of any British heavy ordnance.

BL 9.2-inch Mk I – VII naval gun Naval gun

The BL 9.2-inch Mk I–VII guns were a family of early British heavy breechloading naval and coast defence guns in service from 1881 to the end of World War I. They were originally designed to use the old gunpowder propellants.

BL 6-inch Mk II – VI naval gun Naval gun

The BL 6-inch gun Marks II, III, IV and VI were the second and subsequent generations of British 6-inch rifled breechloading naval guns, designed by the Royal Gun Factory in the 1880s following the first 6-inch breechloader, the relatively unsuccessful BL 6-inch 80-pounder gun designed by Elswick Ordnance. They were originally designed to use the old gunpowder propellants but from the mid-1890s onwards were adapted to use the new cordite propellant. They were superseded on new warships by the QF 6-inch gun from 1891.

BL 10-inch Mk I – IV naval gun Naval gun

The BL 10 inch guns Mks I, II, III, IV were British rifled breechloading 32-calibre naval and coast defence guns in service from 1885.

BL 5-inch gun Mk I – V Naval gun

The BL 5-inch guns Mk I – Mk V were early British 5-inch rifled breechloading naval guns after it switched from rifled muzzle-loaders in the late 1870s. They were originally designed to use the old gunpowder propellants. The 5-inch calibre was soon discontinued in favour of QF 4.7-inch.

References

  1. 2300 ft/s with 25 lb (11 kg) projectile in 1902, using 3 lb 9 oz (1.6 kg) cordite Mk I size 15 propellant (Text Book of Gunnery 1902)
  2. Text Book of Gunnery 1902, Table XII page 337
  3. Hogg & Thurston 1972, page 96
  4. Farndale 1988, pages 398 - 404
  5. Farndale 1988, page 316
  6. Kevin Patience, Konigsberg: A German East African Raider

Bibliography