| SECR L class | |||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 L Class at Ashford shortly after delivery from the manufacturers | |||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||
The SECR L class was a class of 4-4-0 steam tender locomotive built for express passenger service on the South Eastern and Chatham Railway. Although designed by Harry Wainwright, they were built during the Maunsell era.
The South Eastern and Chatham Railway (SECR) was an amalgamation of two competing companies, the South Eastern Railway (SER) and the London, Chatham and Dover Railway (LCDR) which took place in 1899. One of the first tasks of Harry Wainwright, the new Chief Mechanical Engineer, was to introduce a series of standard locomotives which would operate on both railways; but the LCDR main line was more lightly engineered and subject to more severe weight restrictions than that of the SER. At the same time the Board of Directors was anxious to reap some of the financial benefits of amalgamation by closing the LCDR Longhedge Railway Works. [1]
During the first years of the SECR, express passenger services were well served by Wainwright's 'D' and 'E' 4-4-0 classes; however loads continued to increase and by 1912 the designer realised that he would soon need more powerful locomotives. Unfortunately the weight restrictions on the LCDR main line prevented the use of any significantly larger or more powerful locomotives, and strengthening the bridges on this line would have been prohibitively expensive. The Board of Directors therefore ordered Wainwright to prepare a design for a locomotive class specifically for the SER main line services. [2] Wainwright's original design was criticised by the Directors for the use of saturated steam and slide valves, both of which were considered old fashioned in the 20th century. These criticisms coincided with an acute motive power crisis on the railway during the summer of 1913, due in part to the Directors' insistence on the premature closure of Longhedge Works and the inability of Ashford railway works to cope with the increased workload. As a result Wainwright was asked to retire on 30 November 1913, before these new 'L class' locomotives could be ordered. [2]
Wainwright's original design for the new class was for a handsome and robust locomotive which incorporated a Belpaire firebox. Later revisions incorporated piston valves and a Schmidt superheater. After Wainwright's departure his assistant, Robert Surtees, made further detailed changes – slightly enlarging the boiler, firebox and wheels – and substituting a Robinson design superheater, before placing an order for twelve examples with Beyer Peacock for delivery by the end of June 1914. After Richard Maunsell took office in January 1914, he agreed to the ordering of a further ten with minor detail differences and Schmidt superheaters from Borsig of Berlin. The Borsig locomotives were delivered just in time before the outbreak of World War I. They were supplied in kit form and assembled at Ashford railway works by Borsig employees. The Beyer Peacock series were delayed and were delivered later, between August and November 1914. [2]
Following the grouping of the SECR with other railways to form the Southern Railway (UK) in 1923 Maunsell developed the design in 1926 with his L1 class. The design was enlarged and the weight increased to 57 tons 16 cwt. The boiler pressure was increased from 160 to 180 lbs per square inch but the cylinders reduced in diameter from 20.5 to 19.5 inches. The engines also had long-travel piston valves, Maunsell’s own design of superheater and side-window cab and other detail alterations. As a result of the success of these changes Maunsell later gradually increased the boiler pressure of the ‘L class’ and fitted them with smaller cylinders and his own superheater over the next two decades as they passed through the workshops for other reasons. [3]
The Beyer Peacock locomotives were numbered were 760-771, and those from Borsig 772-781. All passed to the Southern Railway (SR) in 1923, and initially an "A" prefix was added to the SECR numbers; later the engines were renumbered 1760-1781. All passed to British Railways (BR) in 1948 and BR numbered them 31760-31781.
The locomotives were used on express trains on the South Eastern main lines from London to Dover, Ramsgate, and Hastings. They remained on these duties until the mid-1920s when they were gradually replaced on the heavier trains by the newer SR L1 class, and in the 1930s by the "King Arthur" and "Schools" classes. By this time improvements had been made to the LCDR main line to Dover and Ramsgate and so they continued to be used on these services until after the Second World War and the Nationalisation of British Railways in 1948. However, the transfer of Bulleid "Light Pacifics" to these services in the early 1950s made the class largely redundant. Some were transferred to Eastleigh and Brighton to replace worn out locomotives on cross-country services, but withdrawal began in 1956. The final locomotive was withdrawn in December 1961. None have been preserved. [4]
| SECR no. | SR no. | BR no. | Builder | Date delivered | Date withdrawn |
|---|---|---|---|---|---|
| 760 | 1760 | 31760 | Beyer Peacock | August 1914 | June 1961 |
| 761 | 1761 | 31761 | Beyer Peacock | August 1914 | December 1956 |
| 762 | 1762 | 31762 | Beyer Peacock | August 1914 | February 1960 |
| 763 | 1763 | 31763 | Beyer Peacock | August 1914 | April 1960 |
| 764 | 1764 | 31764 | Beyer Peacock | August 1914 | February 1961 |
| 765 | 1765 | 31765 | Beyer Peacock | August 1914 | February 1961 |
| 766 | 1766 | 31766 | Beyer Peacock | September 1914 | February 1961 |
| 767 | 1767 | 31767 | Beyer Peacock | September 1914 | October 1958 |
| 768 | 1768 | 31768 | Beyer Peacock | September 1914 | December 1961 |
| 769 | 1769 | 31769 | Beyer Peacock | September 1914 | April 1956 |
| 770 | 1770 | 31770 | Beyer Peacock | September 1914 | November 1959 |
| 771 | 1771 | 31771 | Beyer Peacock | October 1914 | December 1961 |
| 772 | 1772 | 31772 | Borsig | June 1914 | February 1959 |
| 773 | 1773 | 31773 | Borsig | June 1914 | August 1959 |
| 774 | 1774 | 31774 | Borsig | June 1914 | December 1958 |
| 775 | 1775 | 31775 | Borsig | June 1914 | August 1959 |
| 776 | 1776 | 31776 | Borsig | June 1914 | February 1961 |
| 777 | 1777 | 31777 | Borsig | June 1914 | November 1959 |
| 778 | 1778 | 31778 | Borsig | July 1914 | August 1959 |
| 779 | 1779 | 31779 | Borsig | July 1914 | July 1961 |
| 780 | 1780 | 31780 | Borsig | July 1914 | June 1959 |
 | Wikimedia Commons has media related to SECR L class . |
Ashford railway works was in the town of Ashford in the county of Kent in England.
The South Eastern and Chatham Railway (SECR) H Class is a class of 0-4-4T steam locomotive originally designed for suburban passenger work, designed by Harry Wainwright in 1904. Most of the sixty-six members of the class were later equipped for push-pull working for use on rural branch lines.
Harry Smith Wainwright was an English railway engineer, and was the Locomotive, Carriage and Wagon Superintendent of the South Eastern and Chatham Railway from 1899 to 1913. He is best known for a series of simple but competent locomotives produced under his direction at the company's Ashford railway works in the early years of the twentieth century. Many of these survived in service until the end of steam traction in Britain in 1968, and are regarded as some of the most elegant designs of the period.
The South Eastern Railway (SER) O Class was a class of 0-6-0 steam locomotive designed for freight work, and were the main freight engines of the SER, and later the South Eastern and Chatham Railway (SECR) for a number of years. However, they were displaced by the more powerful C class locomotives following the amalgamation of the South Eastern Railway and London, Chatham and Dover Railway (LCDR) in 1899. This relegated the class to working on the numerous branch lines in Kent, on both passenger and freight work. They worked most notably on the Kent & East Sussex Railway and East Kent Railway, operating coal trains from the Kent coal fields to London, as well as shunting work at such locations as Shepherds Well, Hoo Junction and Ashford. The majority were withdrawn before the outbreak of the Second World War in 1939, and those that remained were slowly withdrawn from nationalisation onwards.
The SECR N class was a type of 2-6-0 ("mogul") steam locomotive designed in 1914 by Richard Maunsell for mixed-traffic duties on the South Eastern and Chatham Railway (SECR). Built between 1917 and 1934, it was the first non-Great Western Railway (GWR) type to use and improve upon the basic design principles established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward. The N class was based on the GWR 4300 Class design, improved with Midland Railway concepts.
The SECR D class is a class of 4-4-0 tender locomotives designed by Harry Wainwright for the South Eastern and Chatham Railway.
The SECR N1 class was a type of 3-cylinder 2-6-0 ('mogul') steam locomotive designed by Richard Maunsell for mixed traffic duties, initially on the South Eastern and Chatham Railway (SECR), and later operated for the Southern Railway (SR). The N1 was a development of the basic principles established by the Great Western Railway's (GWR) Chief Mechanical Engineer (CME) George Jackson Churchward and by Maunsell's previous N class design.
The SECR K class was a type of 2-6-4 tank locomotive designed in 1914 by Richard Maunsell for express passenger duties on the South Eastern and Chatham Railway (SECR), which operated between London and south-east England. The Southern Railway (SR) K1 class was a three-cylinder variant of the K class, designed in 1925 to suit a narrower loading gauge. They were among the first non-Great Western Railway (GWR) types to use and improve upon the basic design principles of power and standardisation established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward. The locomotives were based on the GWR 4300 class, improved by the Midland Railway's ideals of simplicity and ease of maintenance.
The Southern Railway L1 class was a class of 4-4-0 steam tender locomotives built for express passenger service on the South Eastern Main Line of the Southern Railway. They were designed by Richard Maunsell as a development of Harry Wainwright's L class.
The SECR E class was a class of 4-4-0 tender locomotives designed by Harry Wainwright for express passenger trains on the South Eastern and Chatham Railway. It was a larger version of the D class incorporating a Belpaire firebox
James I'Anson Cudworth was an English railway engineer, and was Locomotive Superintendent of the South Eastern Railway (SER). He served in this capacity from 1845 to 1876. He is notable for designing a successful method for burning coal in steam locomotives without significant emission of smoke, and for introducing the 0-4-4T wheel arrangement to English railways.
The LCDR R1 class was a class of 0-4-4T locomotives on the South Eastern and Chatham Railway, which were based on an existing London, Chatham and Dover Railway design.
The LCDR M1 class was a class of 4-4-0 steam locomotives of the London, Chatham and Dover Railway (LCDR), very similar to the earlier M class but with steel frames, larger tenders and other detailed differences. The class was designed by William Kirtley and introduced in 1880.
The LCDR C class or Europa Class was a class of 2-4-0 steam locomotives of the London, Chatham and Dover Railway (LCDR). The class was designed by William Martley and introduced in 1873, intended for the heaviest express services between London and Dover.
The LCDR L class or Enigma Class was a class of 2-4-0 steam locomotives of the London, Chatham and Dover Railway (LCDR). The class was designed by William Martley and introduced in 1869, intended for services between London and Dover.
The LCDR Second Sondes class was a class of six 2-4-0T steam locomotives. They were designed by William Martley for the London, Chatham and Dover Railway (LCDR), and built at the LCDR's Longhedge works during 1865, using components from the Sondes class 4-4-0ST locomotives, including the boilers.
The LCDR Aeolus class was a class of four 4-4-0 steam locomotives. They were supplied to the London, Chatham and Dover Railway (LCDR) by R. & W. Hawthorn & Co. acting as agents for Robert Stephenson & Co. which built the locomotives, but had subcontracted some components to Hawthorn. They were delivered to the LCDR between September 1860 and April 1861. They were all renewed by William Martley as 2-4-0T at the LCDR's Longhedge works in 1872–73, using components from the original locomotives, including the boilers.
The LCDR Brigand class was a pair of steam locomotives of the 0-4-2 wheel arrangement supplied to the London, Chatham and Dover Railway (LCDR). They were designed by Patrick Stirling for the Glasgow and South Western Railway (GSWR), which ordered twenty in 1860 from Sharp, Stewart & Co.. At this time, the LCDR needed more locomotives but had little money available, so their locomotive superintendent, William Martley, visited various manufacturers to find out what was available quickly and cheaply. He arranged for two of the locomotives ordered by the GSWR to be delivered instead to the LCDR – they arrived in August 1861, two more being ordered from Sharp, Stewart for the GSWR as replacements.
The LCDR Echo class was a class of five steam locomotives, initially of the 4-2-0 wheel arrangement. They were designed by Thomas Russell Crampton for the London, Chatham and Dover Railway (LCDR) as "1st class fast passenger" locomotives.
The LCDR Acis class was a class of fourteen steam locomotives of the 0-6-0 wheel arrangement. They were designed by William Martley for the London, Chatham and Dover Railway (LCDR) as goods locomotives.