South Australian Railways Brill railcar

Last updated

Brill railcar
SAR 41 Brill, NRM, 2014.JPG
Model 75 railcar no. 41 at the National Railway Museum, Port Adelaide
In service1924-1971
Manufacturer J. G. Brill Company, Philadelphia, United States (chassis), Islington Railway Workshops (body)
Constructed1924, 1926–1927, 1930
Entered service1924–1925, 1927-1930
Number builtModel 55: 12
Model 75: 39
Fleet numbers4-15, 30-59, 100-106, 487
Operators South Australian Railways SteamRanger Heritage Railway
Lines servedAdelaide suburban (broad gauge), country (broad, narrow gauge)
Specifications
Prime mover(s) Model 55: Midwest 4-cylinder petrol engine, 68 hp (51 kW) (original);

later refitted with Gardner six-cylinder diesel engines

Model 75:

Contents

Winton 4-cylinder petrol engine, later refitted with Gardner six-cylinder diesel engines
Power outputModel 55: 68 hp (51 kW) (original), later refitted 102 hp (76 kW)
Model 75: originally, 186 hp (139 kW), later refitted (?)
Transmission Mechanical: 4-speed manual
Track gauge 3 ft 6 in (1,067 mm)
5 ft 3 in (1,600 mm)

Two models of the Brill railcar were operated by the South Australian Railways between 1925 and 1971. Introduced to run on country rail services, the "Barwell Bulls" serviced most of the state's railway lines until they were eventually replaced by both the Bluebird and Redhen railcars. The last units were withdrawn in 1971.

Background

Model 55

In 1924, the South Australian Railways (SAR) decided to order a group of railcars in order to continue services at country stations that did not have enough passengers to make those services financially viable. J. G. Brill Company were contracted to supply twelve railcar chassis, which would be mated to bodies constructed by the SAR's own Islington Railway Workshops. Numbered 4 to 15, these 12 railcars entered service during 1924 and 1925 as the Model 55 railcar class, and overnight these trains were a success. [1]

Model 75

Two years later, the Brill company supplied the SAR with an enlarged version, known as the Model 75. The first was built by J.G. Brill Company with the remaining 38 by the Islington Railway Workshops, entering service in 1927. They differed from the 55s in having a Winton 4-cylinder petrol engine, at 17.8 metres were three metres longer and had a capacity of 63 versus 43. The first 30 (30-59) entered service on the broad gauge, with the other eight (100-106 and 487) built for narrow gauge operation. They were married with 200 and 300 series trailer carriages. One was sold to the Victorian Railways in 1928 after only a few months service. [2]

In service

The 55s and 75s worked on country lines around South Australia until their withdrawal from service, and originally featured a brown livery. To celebrate the 80th anniversary of the SAR in 1936, all Model 55s and 75s still in service were repainted into a green and cream livery, which they wore until retirement. [3] Later, yellow stripes were added to the front to increase visibility. The 55s were built for operation on the broad gauge network, although two (numbers 4 and 10) did operate on the narrow gauge for a time, being renumbered 112 and 111. [1]

All 55s were powered by Midwest four-cylinder 68 horsepower (51 kW) petrol engines, while the 75s used the more powerful Winton Model 110 six-cylinder engines. From 1934, the SAR began re-powering the 55s with Gardner six-cylinder 102 horsepower (76 kW) diesel engines but, as a result of World War II, some railcars were not converted until after 1945. At the same time, multiple-unit controls were fitted to the Brill railcars. [1] In the 1950s, the 75s were re-powered with Cummins diesel engines. [2]

Victorian Railways 44RM & 200MT

In 1928, a Model 75 and trailer were sold to the Victorian Railways, to become their 44RM and 200MT. This was as a trial for comparison against other railmotors then in service, and regularly operated between Echuca and Toolamba. [4]

44RM was damaged in a level crossing collision in 1944. It was formally withdrawn in 1947 and scrapped in 1951.

200MT remained in service until the mid 1970s, then was stored at the back of the Bendigo carriage shed until early 1981. It was then transferred to Newport Workshops for preservation. [5] It is now preserved at Daylesford Spa Country Railway

Withdrawal and preservation

Preserved Model 55 railcar no. 8 at the National Railway Museum, Port Adelaide, 2014 SAR 8 Brill, NRM, 2014.JPG
Preserved Model 55 railcar no. 8 at the National Railway Museum, Port Adelaide, 2014
Brill Model 55 (left) and Model 75 railcars on the north railcar depot tracks at Adelaide railway station, 1962 SAR Brill 55 and 75 class railcars at Adelaide Station, 1962.jpg
Brill Model 55 (left) and Model 75 railcars on the north railcar depot tracks at Adelaide railway station, 1962

However, the Brills were facing replacement during the 1950s. In 1955 the SAR introduced its Bluebird and Redhen railcars, and the "Barwell Bulls" – nicknamed after a former Premier of South Australia, Henry Barwell, and the bovine sound that the air horn emitted – were moved to suburban services in Adelaide. As more Redhens were constructed to replace them on the metropolitan lines, the last Brill railcars were withdrawn in October 1971.

Five Brills have been preserved. Railcars 8 (55) and 41 (75) are at the National Railway Museum, Port Adelaide, 106 (75) and trailer car 305 are at the Pichi Richi Railway in operational condition. [3] SteamRanger has 60 (75) which was converted from condemned Brill trailer 207 and also 43 (75) which was donated to the society at no cost long-time ARHS member John Wilson. [6] [7]

Trailer 200MT, sold to the Victorian Railways in 1928, was preserved at the Seymour Railway Heritage Centre. It was later transferred to the South Gippsland Railway, and in 2017 it became the responsibility of the Yarra Valley Railway. [8]

The remainder have been scrapped or converted to PWS sleeping cars for use by railways workers. A few ended up as accommodation at the Barossa Junction Motel in the Barossa Valley. This motel has since closed and the carriages sold on to new owners.

Related Research Articles

<span class="mw-page-title-main">Pichi Richi Railway</span> Heritage railway in South Australia

Pichi Richi Railway is a 39 kilometres narrow-gauge heritage railway in the southern Flinders Ranges of South Australia between Quorn and Port Augusta. For much of its length the line lies in the picturesque Pichi Richi Pass, where the line was completed in 1879 as work proceeded north to build a railway to the "Red Centre" of Australia – the Central Australia Railway.

<span class="mw-page-title-main">South Australian Railways Redhen railcar</span> Class of Australian railcar / diesel multiple unit

The Redhen railcars was the nickname given to the 300 and 400 classes of diesel-hydraulic railcars designed by the South Australian Railways and built at its Islington Railway Workshops between 1955 and 1971. The railcars, which operated in Adelaide suburban service until 1996, remain a nostalgic part of South Australian memory. Some continue to be operated by the SteamRanger Heritage Railway, the National Railway Museum, Port Adelaide and other railway preservation entities.

<span class="mw-page-title-main">2000 class railcar</span> Railcars of suburban Adelaide

The 2000 class and 2100 class were diesel multiple units that operated on the Adelaide rail network between 1980 and 2015. They were built by Comeng in Granville, New South Wales in 1979–1980.

Railmotor is a term used in the United Kingdom and elsewhere for a railway lightweight railcar, usually consisting of a railway carriage with a steam traction unit, or a diesel or petrol engine, integrated into it.

<span class="mw-page-title-main">National Railway Museum, Port Adelaide</span> Railway museum

The National Railway Museum, Port Adelaide, South Australia is the largest railway museum in Australia. More than 100 major exhibits, mainly from the South Australian Railways (SAR) and Commonwealth Railways and their successor, Australian National, are displayed at its 3.5 hectares site. A very large archival collection of photographs of those railways and records created by them is also managed by the museum. The museum is operated with a large number of volunteers.

<span class="mw-page-title-main">Diesel Electric railmotor (VR)</span>

The Diesel Electric Rail Motor (DERM) was a type of railmotor operated by the Victorian Railways in Australia.

<span class="mw-page-title-main">DRC railcar</span> Class of diesel rail car used in Australia

The DRC was a class of railmotor operated by the Victorian Railways on its country rail network in Victoria, Australia. The cars were built by Tulloch Limited in New South Wales, and featured aluminium and steel construction, air-conditioning, and twin diesel engines with hydraulic transmissions.

<span class="mw-page-title-main">Walker railmotor</span> Diesel railcar

The family of Walker railmotors were a type of diesel railcar operated by the Victorian Railways in Australia.

<span class="mw-page-title-main">Commonwealth Railways NC class</span> Two light, narrow-gauge diesel-hydraulic locomotives of the Commonwealth Railways, built in 1956

The Commonwealth Railways NC class consisted of two diesel-hydraulic locomotives built by Clyde Engineering, Granville, New South Wales in 1956. The Lakewood Firewood Company, Kalgoorlie was the first owner; the Commonwealth Railways purchased them in 1965. They ceased revenue service in the early 1980s.

<span class="mw-page-title-main">Commonwealth Railways NSU class</span> Narrow-gauge diesel-electric locomotive class of the former Commonwealth Railways, Australia

The Commonwealth Railways NSU class was a class of diesel-electric locomotives built in 1954 and 1955 by the Birmingham Railway Carriage and Wagon Company, England, for the Commonwealth Railways to be deployed on the narrow-gauge Central Australia Railway and North Australia Railway.

This article lists some of the terminology used at present and in the past by railway employees, railway enthusiasts and railway historians in Australia. Many appear from time to time in specialist, rail-related publications. Significant regional variations exist, indicated by abbreviations of the state or railway.

<span class="mw-page-title-main">New South Wales 900/800 class railcar</span>

The 900/800 class railcars were diesel multiple units built by the New South Wales Government Railways between November 1951 and November 1960.

<span class="mw-page-title-main">Commonwealth Railways NB class</span> Two small saddle-tank steam locomotives

The Commonwealth Railways NB class originated in a shipment of four 0-6-0, 1067 millimetres gauge, saddle tank steam locomotives built by the Vulcan Iron Works of Wilkes-Barre, Pennsylvania. They were imported to Australia in 1916 for construction work at the naval base at Henderson, Western Australia. Their tractive effort was 9500 pounds.

<span class="mw-page-title-main">South Australian Railways Bluebird railcar</span> Self-propelled rail vehicle of the South Australian Railways

The Bluebird railcars were a class of self-propelled diesel-hydraulic railcar built by the South Australian Railways' Islington Railway Workshops between 1954 and 1959.

<span class="mw-page-title-main">South Australian Railways T class</span> 4-8-0 locomotive of the former South Australian Railways

The South Australian Railways T class was a class of 4-8-0 steam locomotives operated by the South Australian Railways. Several were sold to the Tasmanian Government Railways; some others operated on the Commonwealth Railways.

<span class="mw-page-title-main">British steam railcars</span> A self-propelled railcar powered by a steam engine

A steam railcar is a rail vehicle that does not require a locomotive as it contains its own steam engine. The first steam railcar was an experimental unit designed and built in 1847 by James Samuel and William Bridges Adams. In 1848, they made the Fairfield steam carriage that they sold to the Bristol and Exeter Railway, who used it for two years on a branch line.

The 1100 class railcar or Budd railcar were a type of diesel railcar built by Commonwealth Engineering for the Department of Railways New South Wales in 1961. They primarily operated on the South Coast Daylight Express until withdrawn in 1993.

<span class="mw-page-title-main">South Australian Railways F class (1902)</span> Class of broad-gauge 4-6-2T locomotives

The South Australian Railways F class is a class of 4-6-2T steam locomotives operated by the South Australian Railways.

<span class="mw-page-title-main">Commonwealth Railways NDH class railcar</span>

The NDH class railcars are a class of self propelled diesel-hydraulic railcars designed by Commonwealth Engineering and built by the Gloucester Railway Carriage & Wagon Company in England for the Commonwealth Railways, Australia in 1954. They were known as Gloucester railcars.

<span class="mw-page-title-main">Commonwealth Railways CB class railcar</span> Diesel multiple unit railcar

The CB class railcar were a type of Budd Rail Diesel Cars operated by the Commonwealth Railways and Australian National in Australia from 1951 until 1990.

References

  1. 1 2 3 8 National Railway Museum
  2. 1 2 41 National Railway Museum
  3. 1 2 South Australian Railways Model 75 Brill railcars Pichi Richi Railway
  4. Newsrail October 1981 p. 247
  5. Newsrail June 1981 p. 135
  6. Restoration to Service of Brill Railcar 60 SteamRanger
  7. Brill Diesel Railcar 43 SteamRanger
  8. "South Gipsland Railway Rolling Stock Fund". Yarra Valley Railway Facebook Page. Retrieved 21 May 2017.

Further reading

Bird, Kim (1981–82). 'Brill Railcars of the South Australian Railways'. Australian Railway Historical Society Bulletin. Redfern, NSW. Australian Railway Historical Society Inc. October 1981 pp. 213–236; November 1981 pp. 237–260; December 1981 pp. 272–282; January 1982 pp. 1–8.

Commons-logo.svg Media related to Brill railcar at Wikimedia Commons