South Australian Railways H class

Last updated

South Australian Railways H Class
South Australian Railways H Class No. 27.jpg
South Australian Railways H Class No. 27
Type and origin
Power typeSteam
Builder Robert Stephenson and Company
Serial number1992-1994, 2015-2016, 2128-2129 & 2303-2304
Build date1870-1877
Total produced9
Rebuilder South Australian Railways
Rebuild date1880-1910
Number rebuilt8
Specifications
Configuration:
   Whyte 4-4-0
   UIC 2'B T
Gauge 5 ft 3 in (1,600 mm)
Driver dia.4 ft 6 in (1,372 mm)
Length44 ft 6 in (13.56 m)
Axle load 8 long tons 16 cwt (19,700 lb or 8.9 t)
Total weight43 long tons 19 cwt (98,400 lb or 44.7 t)
Fuel type Coal
Fuel capacity3 long tons 15 cwt (8,400 lb or 3.8 t)
Water cap.1,060 imp gal
(1,270 US gal; 4,800 L)
Firebox:
  Grate area12.7 sq ft (1.18 m2)
Boiler pressure130 psi (896 kPa)
Heating surface:
  Firebox73.1 sq ft (6.79 m2)
  Tubes780.6 sq ft (72.52 m2)
Cylinders 2
Cylinder size 14 in × 20 in (356 mm × 508 mm)
Performance figures
Tractive effort 8,021 lbf (35.68 kN)
Career
Operators South Australian Railways
Class H
Number in class9
Numbers2-3 & 25-31
First run1871
Withdrawn1888-1930
Scrapped1888-1930
DispositionAll scrapped

The South Australian Railways H Class locomotives were built by Robert Stephenson and Company in 1870 for the South Australian Railways. The first of three numbered 25, 26 and 27 were all in service by June 1871. After being a well received class, two more locomotives (Nos. 28 and 29) were ordered and were in service by October 1872. Nos. 30 and 31 arrived in August 1874. The final two locomotives ordered for the SAR arrived in August 1877 and were numbered 2 and 3. These locomotives worked on the SAR system for many years, with only one member of the class being withdrawn in 1888. The rest of the class were rebuilt over the years and lasted well into the next century with, the final locomotive being withdrawn by 1930. [1]

History

The first three of the newly designated H class were newly imported from England to work goods trains on the lightly laid line north of Roseworthy to Burra-Burra. After the H classes arrival on this north part of the line it relieved the smaller G class tank locomotives for duties elsewhere on the South Australian Railways. Proving to be a very successful class of locomotives, a further set of purchases were made from the Robert Stephenson and Company in the years leading up to 1877. A total of nine H Cass engines were in service by 1877 working on the Burra-Burra line hauling food and supplies from Adelaide and returning with more products for the Burra-Burra mines.

When the heavier R class 4-6-0 locomotives arrived in 1886, work was found for the H class on other parts of the SAR system. This included hauling trains between Strathalbyn, Milang and Victor Harbor. Locomotive No. 25 was hired out by contractors for a short period of time to assist in constructing the Aldgate to Nairne line. Locomotive No. 2 was also hired out to assist with construction work on some of the Murraylands lines which also serviced the Mallee wheatlands. These lighter lines (including the Pinnaroo line) were eventually 'home' to the H class in their later years of service on the SAR. Their useful lives on the network came to an end by working suburban shunting duties and occasional passenger runs to the northern suburban stations. The arrival of larger motive power for the SAR and even heavier trains being run ultimately resulted in the last H class engine being scrapped in 1930. [2] [3]

Related Research Articles

<span class="mw-page-title-main">4-6-2</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-6-2 represents the wheel arrangement of four leading wheels on two axles, six powered and coupled driving wheels on three axles and two trailing wheels on one axle. The 4-6-2 locomotive became almost globally known as a Pacific type after a locomotive built by the Baldwin Locomotive Works in Philadelphia was shipped across the Pacific Ocean to New Zealand.

<span class="mw-page-title-main">2-8-0</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 2-8-0 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles, and no trailing wheels. In the United States and elsewhere, this wheel arrangement is commonly known as a Consolidation, after the Lehigh and Mahanoy Railroad’s Consolidation, the name of the first 2-8-0.

<span class="mw-page-title-main">0-4-2</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 0-4-2 represents the wheel arrangement with no leading wheels, four powered and coupled driving wheels on two axles and two trailing wheels on one axle. While the first locomotives of this wheel arrangement were tender engines, the configuration was later often used for tank engines, which is noted by adding letter suffixes to the configuration, such as 0-4-2T for a conventional side-tank locomotive, 0-4-2ST for a saddle-tank locomotive, 0-4-2WT for a well-tank locomotive and 0-4-2RT for a rack-equipped tank locomotive.

<span class="mw-page-title-main">Locomotive No. 1</span>

Locomotive No. 1 hauled the first passenger train in New South Wales, Australia. It was built by Robert Stephenson and Company. In 1846, the Sydney Railway Company was formed with the objective of building a railway line between Sydney and Parramatta. No. 1 was one of four locomotives that arrived by sea from the manufacturer in January 1855. The first passenger train hauled by No. 1 was a special service from Sydney Station to Long Cove viaduct on 24 May 1855, Queen Victoria's birthday.

NZR B<sup>A</sup> class

The BA class was a class of steam locomotive built by the New Zealand Railways Department (NZR) for use on New Zealand's national rail network. The first BA entered service in November 1911, with the last of the 11 class members introduced on 14 May 1913.

<span class="mw-page-title-main">Victorian Railways A2 class</span> Class of Australian 4-6-0 steam locomotives

The A2 class was an express passenger locomotive that ran on Victorian Railways from 1907 to 1963. A highly successful design entirely the work of Victorian Railways' own design office, its long service life was repeatedly extended as the Great Depression and later World War II delayed the introduction of more modern and powerful replacement locomotives.

The railways of New South Wales, Australia, use a large variety of passenger and freight rolling stock. The first railway in Sydney was opened in 1855 between Sydney and Granville, now a suburb of Sydney but then a major agricultural centre. The railway formed the basis of the New South Wales Government Railways. Passenger and freight services were operated from the beginning. By 1880, there was a half hourly service to Homebush.

<span class="mw-page-title-main">South Australian Railways 620 class</span>

The South Australian Railways 620 class was a class of 4-6-2 steam locomotives operated by the South Australian Railways.

<span class="mw-page-title-main">LSWR 415 class</span>

The LSWR 415 class is a 4-4-2T steam tank locomotive, with the trailing wheels forming the basis of its "Radial Tank" moniker. It was designed by William Adams and introduced in 1882 for service on the London and South Western Railway (LSWR).

<span class="mw-page-title-main">Victorian Railways B class (1861)</span> Class of Australian 2-4-0 steam locomotives

The Victorian Railways B class was a class of 2-4-0 passenger locomotives operated by the Victorian Railways (VR) between 1862 and 1917, built by various builders. The B class locomotives are regarded as the first mainline VR motive power, and were highly successful in passenger operations.

<span class="mw-page-title-main">New South Wales Z12 class locomotive</span>

The New South Wales Z12 class was a class of 4-4-0 steam locomotives operated by the New South Wales Government Railways of Australia.

<span class="mw-page-title-main">New South Wales C32 class locomotive</span>

The C32 class was a class of steam locomotives built for the New South Wales Government Railways of Australia.

<span class="mw-page-title-main">South African Class 5A 4-6-2</span> 1903 design of steam locomotive

The South African Railways Class 5A 4-6-2 of 1903 was a steam locomotive from the pre-Union era in the Cape of Good Hope.

<span class="mw-page-title-main">South African Class C 4-6-0T</span> 1879 design of steam locomotive

The South African Railways Class C 4-6-0T of 1879 was a steam locomotive from the pre-Union era in the Colony of Natal.

<span class="mw-page-title-main">Barry Railway Class C</span>

Barry Railway Class C were originally 2-4-0T steam locomotives of the Barry Railway in South Wales. They were designed by J. H. Hosgood and built by Sharp Stewart.

<span class="mw-page-title-main">CGR 1st Class 4-4-0T</span> Class of 11 South African 4-4-0T locomotives

The Cape Government Railways 1st Class 4-4-0T of 1875 was a South African steam locomotive from the pre-Union era in the Cape of Good Hope.

<span class="mw-page-title-main">South Australian Railways A class</span>

The South Australian Railways A Class locomotives arrived for the South Australian Railways in September and October 1868 from Robert Stephenson and Company. A third and final locomotive was ordered and arrived in 1873, these locomotives were withdrawn between 1893 and 1924 from the SAR after many years of hard service.

<span class="mw-page-title-main">South Australian Railways C class</span> Class of Australian 2-4-0 locomotives

The South Australian Railways C Class locomotives were built by the Robert Stephenson and Company for the South Australian Railways in 1856. The first locomotive was in service by November 1856, with the second engine in service by January 1857. They were both withdrawn after long service lives, with No. 5 being withdrawn after 50 years working on the SAR. No. 6 lasted well into Commissioner Webbs era, finally being withdrawn in 1926 at almost 70 years old.

<span class="mw-page-title-main">South Australian Railways O class (first)</span> Class of Australian locomotives

The South Australian Railways O Class (1st) locomotives were built by Baldwin Locomotive Works for the South Australian Railways (SAR). They entered service in 1881 on the SAR system and were both withdrawn and scrapped by 1904.

This was a group of 18 2-4-0WT passenger steam locomotives, built by Robert Stephenson & Company and an extra locomotive built from spare parts supplied with the other 18. These locomotives not only provided the bulk workforce of the early private railway operators in Victoria, but upon their withdrawal they once again proved themselves as useful as contractors locos building some of the railway lines for the then expanding Victorian Railway network.

References

  1. TURNER, JIM (1998). EARLY AUSTRALIAN STEAM LOCOMOTIVES 1855-1895. South Australia: Kangaroo Press. p. 60. ISBN   0-86417-875-1.
  2. FLUCK, R. E.; SAMPSON, R.; BIRD, K. J. (1986). STEAM LOCOMOTIVES AND RAILCARS OF THE SOUTH AUSTRALIAN RAILWAYS. South Australia: Mile End Railway Museum (S.A.) Inc. p. 51. ISBN   0959 5073 37.
  3. Drymalik, Chris. "Broad Gauge H-class 4-4-0 locomotives". Chris's Commonwealth Railways Information (ComRails). Retrieved 30 July 2019.