This article describes the nine airconditioned sitting cars and fourteen brake vans that were built by the South Australian Railways at Islington Workshops between 1964 and 1967. All were distinguished by fluted stainless steel panels on their sides, compatible with the appearance of cars introduced to The Overland in 1950.
The new cars ran on the East-West Express between Adelaide and Port Pirie in lieu of late-1930s, non-airconditioned main line passenger cars. The broad gauge system had been extended north to Port Pirie in 1937 to meet a southern extension from Port Augusta on the Commonwealth Railways' standard gauge system, creating Port Pirie as a break-of-gauge and transshipment point. To encourage passengers to use the line despite the inconvenience of changing trains, a cafeteria car – the forerunner of The Overland cars – had been built in 1947. The new sitting cars were also allocated to the Blue Lake Express to Mount Gambier. The guard's vans operated widely on the SAR and, in the 1980s, the Victorian Railways.
PR photo of cafeteria car passengersC1 in its original configuration (1950s, Adelaide railway station)South Australian Railways general arrangement drawing of car C1
One cafeteria car, number C1, was constructed at the South Australian Railways' Islington Railway Workshops in 1947, as one of the first Australian railway vehicles utilising corrugated stainless steel plates for the exterior. The design was based on contemporary streamliner cars in the United States, which had been seen by the Chief Mechanical Engineer, Frank Harrison, on his tour to the United States soon after World War II.[2] It was the prototype for concepts to be included in the new fleet of cars for The Overland, and was intended to "surpass other buffet cars" in manufacture quality and passenger comfort; the design was detailed down to the level of the food trays, which were introduced on the vehicle long before they became common practice on airlines.[citation needed]
The car was not used on the Adelaide–Melbourne Overland service, since it included stops at on-platform refreshment rooms en route, and remnant dining cars (such as Avoca and Hopkins) from the pre-corrugated era were kept in service.[2] Instead it was deployed on the Adelaide–Port Pirie line that linked up with the Trans-Australian service.
The car was constructed using the side frames as the primary load-carrying system, with formed steel channels forming the body sides between the window frames; the sum framework of each vehicle comprises well over four hundred parts.[2] Rockwool insulation was packed into the side voids, sewn in place with copper wire, and the body was finished with fluted aluminium strips (later stainless steel) riveted or screwed in place, giving the classic look of the series.
Harrison had originally specified Plymetl for the interior partitions, which was a five-sheet-thick plywood with steel panels on the exterior. It was unavailable at the time owing to government financial policy, so a similar material was obtained from England, called Plymax.
The car was fitted with an underfloor generator set in addition to the standard axle-driven generator; both were used to supply power to the air conditioning system (the first South Australian Railways vehicle to be so fitted) and kitchen refrigeration.
The interior had a central kitchen/servery area flanked by eight tables and seating for 46 sitting passengers.
When it first entered service, the vehicle was fitted with full-width concertina diaphragms and a full-depth diaphragm, and painted royal blue along the windowline; no colour photos of that scheme exist. Because of the concertinas the vehicle had to be marshalled next to steel carriages or V&SAR jointly-owned stock to prevent damage. Additionally, since the vehicle did not have doors to station platforms on either side, access was only available from adjacent vehicles, including stock deliveries for the kitchen staff.[3] Externally the vehicle was left unpainted on the corrugated sections and with black undergear, but all other surfaces were a deep royal blue. Internally, the car was painted beige including the tables; the upholstery was brown. The tables were fitted with an aluminium strip around the edges, and the floor was a black and white chequered linoleum surface. The car's riding qualitiies were improved in 1953 when the first pair of Commonwealth bogies made by Bradford Kendall – a design that was eventually to become widespread on Australian railways – was fitted in a test program.
In the early 1960s the car was repainted with a dark green replacing the previous blue, to give the car something of an inverse version of the livery then applied to steel country lines cars. Subsequently it was painted green with a cream band along the windows and a black roof.
The car caught fire in 1967 at Bowmans railway station, requiring a complete internal rebuild. As part of those works the full-width concertinas were removed from the ends and replaced with the regular style, and the car was repainted into the regal red and silver colour scheme applied to the Overland cars and the new AD and BD cars. In 1982 the vehicle was hired to Victoria to provide on-train catering as a temporary measure until enough of the new BRN and BRS buffet cars entered service; it was first observed as a regular vehicle on the Gippslander service to Sale.[4] However, the car was found to have considerable rust in the frames, so the lease was cancelled and the car returned to Australian National in 1986.
In 1988 the cafeteria car was purchased by the Port Dock Station Museum (now the National Railway Museum, Port Adelaide), where it was restored. Since then it has been used for its original purpose on special events days and when hired by groups.[3]
53ft (16.15m) centres, with 8ft (2.44m) wheelbases each for a total wheelbase of 61ft (18.59m)
During the latter half of the Joint Stock series' construction, the South Australian Railways chose to build a handful of carriages to provide upgraded accommodation on the East-West Express from Adelaide to Port Pirie. Over the period 1964 to 1967 nine carriages and fourteen guard's vans were constructed at Islington Railway Workshops, using similar methods to those applied in the building of the 1947 prototype cafeteria car and the "Overland" Joint Stock fleet introduced from 1949.
The fleet initially consisted of six virtually identical cars – AD 1 and 2 for first class passengers and BD 1, 2, 3 and 4 for second class passengers – each with 70 seats arranged in a saloon format, and three composite cars – ABD 1, 2 and 3 – with 68 seats. The intention was to run the cars as two four-car sets with one composite vehicle on standby, providing capacity for 278 passengers.[5] The only difference between the classes was in the colour of carpet and the quality of the upholstery, to save on construction costs. All seats were capable of rotating and reclining, as paired units either side of the central aisle. A full-height partition was constructed at the middle of the car to divide smoking and non-smoking sections, with the former having room for 36 passengers and the latter 34; in the case of the composite carriages, both halves would only seat 34, and neither saloon was allocated to smoking passengers.
AD first class coach carBD second class coach car
A full-width vestibule was provided at one end, separated from the non-smoking saloon (or second class saloon in the composite cars) by a swing door. The vestibule was fitted on both sides with two-part "stable" doors allowing train staff to lean out of the carriages if necessary. Steps enabling ground-level boarding had a flap that could be lowered if the train stopped at a platform.
In 1967, the three composite cars were converted to first class exclusively, and recoded from ABD 1-3 to AD 3-5 respectively. It is not clear whether this entailed increasing capacity from 68 to 70 passengers each.[6]
Each car was powered individually by an underfloor auxiliary diesel engine, driving an AC alternator which would supply power for the air conditioning and lighting. When the cars were converted to standard gauge, that system was removed and the cars were instead fitted with standard 415vDC head-end power sockets.
About 1975, the entire fleet of sitting cars was altered to allow a future conversion to standard gauge, which occurred from 1982 when the line from Port Pirie to Adelaide was converted. The first few conversions retained their original classes, but in the mid 1980s they were changed to AG (first class) and BG (second class) to tie in better with the coding system of Australian National Railways. Cars AD 1-5 became AG 376-372 in descending order, and cars BD1-4 became BG370, 368, 369 and 371; though car 372 spent a few months as second class car BG372.[6]
In the early 1990s the cars were fitted with showers, and the seating capacity was increased to 80 per car; the first class carriages were then fitted with external "Indian Pacific" name boards, and the second class carriages with "Ghan" nameboards. The Indian Pacific cars were repainted to plain silver and the Ghan cars similarly but with a gradient yellow-orange band fitted along the windowline. As part of the refurbishment, BG369 was recoded AG369 and included in the Indian Pacific group. In 1997 the entire fleet was sold to Great Southern Rail, and in 2002-2003 the cars were sold to a third party and leased back for operational purposes. Sometime after 2003, car AG369's seating was reduced to 48 passengers after a disabled toilet was fitted.[7]
Brake vans
Brake vans (CD, SCD, AVCY & AVCP)
In service
1965-current
Constructed
1965-1967
Number built
14
Fleet numbers
CD1-11, SCD1-3, AVCY/AVCP 1-9, 378-379, 388-392, OWR392, "RICE" and "TRACKS" car
53ft (16.15m) centres, with 8ft (2.44m) wheelbases each for a total wheelbase of 61ft (18.59m)
From 1965, Islington Railway Workshops adapted the Dclass passenger car design to provide 14 large brake vans for non-metropolitan passenger trains. They were used initially between Adelaide and Port Pirie and on the Blue Lake train to Mount Gambier.
The vans are organised into a guard's compartment at one end, measuring 8ft 9in (2.67m), followed by three baggage compartments of 23ft 2.5in (7.07m), 20ft 11.25in (6.38m) and 15ft 2.5in (4.64m) and capacities of 10 long tons (10.16t), 8 long tons (8.13t) and 7 long tons (7.11t) respectively. The centre compartment was designed with a partially removable floor to allow for fish to be stored under the car body and provide air-cooling while the train was in motion. The layout of the car allowed all goods compartments to be loaded at the same time. The initial quality of ride for the guard was less than in the later CO vans, which had a similar layout but with the guard's compartment between two of the three goods compartments.[9]
The guard had a 47-gallon water tank under the floor to provide for the toilet and wash basin, and concertinas were provided at both ends of each car to ensure that staff were protected if passing between cars.
The final three vans, planned to be CD12, 13 and 14, were instead stored at Islington Railway Workshops on transfer bogies after they were completed in May 1967. They were held until January 1970, when they entered service as standard gauge vans SCD 1, 2 and 3 for local traffic between Port Pirie and Broken Hill. Van SCD3 was taken from that service on occasion and used as a replacement for one of the two CO vans on the Overland when they required maintenance.[9]
CD class brake van
All vans were included in the sale of the South Australian Railways fleet to Australian National Railways in 1975. In 1987, guards' vans were recoded to meet the new Railways of Australia identification standard, and the CD vans took on the new code AVCY for Australian National, Van, 3rd type, and high speed / fixed gauge. The program was followed up a few years later with a recoding to AVCP, marking the vans for passenger services, and vans 2, 3, 5, 6, 7, 8, 9, 378, 379, 389 and 391 were recoded as such. Overlapping with this program was the application of Australian National numbers, with van CD4 becoming AVCY389, 10 to 391 and 11 to 392, and SCD1 renumbered to 378 and 3 to 379. Other vans were allocated 300-series numbers but were scrapped before the new numbers could be applied.
From 1982 to about 1988 four vans – CD1, 2, 3 and 7 – were leased to the Victorian Railways for use on country services in their state while awaiting conversion of AZ carriages to ACZ format.[10]
From the mid 1980s the vans were needed less as fewer and longer trains were being operated and the railways were gradually leaving the small parcels business. Vans 4, 6, 8, 9, 10 and 11 were removed from normal service, refurbished and repainted with blue roofs and ends, and yellow and red stripes on the sides, and converted into a fixed consist called the Jubilee Trade Train. The train toured South Australia celebrating local industries over the 150 years since European settlement.[11]
In 1991, van AVCY391 was pulled from the now stored Jubilee consist and converted to OWR392, for the RICE and TRACKS services: respectively, Remote and Isolated Children's Exercise, and Trans Australian Community Services. It was withdrawn after catching fire a few years later.[12]
The entire fleet had been withdrawn by 1990, and in 1993 all but AVCP2 had been scrapped; the final vehicle followed in early 1994.
Related Research Articles
The Indian Pacific is a weekly experiential tourism passenger train service that runs in Australia's east–west rail corridor between Sydney, on the shore of the Pacific Ocean, and Perth, on the shore of the Indian Ocean – thus, like its counterpart in the north–south corridor, The Ghan, one of the few truly transcontinental trains in the world. It first ran in 1970 after the completion of gauge conversion projects in South Australia and Western Australia, enabling for the first time a cross-continental rail journey that did not have a break of gauge.
The Overland is an interstate passenger train service in Australia, travelling between the state capitals of Melbourne and Adelaide, a distance of 828 km (515 mi). It first ran in 1887 as the Adelaide Express, known by South Australians as the Melbourne Express. It was given its current name in 1936. Now operated by private company Journey Beyond, the train undertakes two return trips a week. Originally an overnight train that stopped at large intermediate stations, it now operates during the day, stopping less frequently.
South Australian Railways (SAR) was the statutory corporation through which the Government of South Australia built and operated railways in South Australia from 1854 until March 1978, when its non-urban railways were incorporated into Australian National, and its Adelaide urban lines were transferred to the State Transport Authority.
The South Australian Railways 620 class was a class of 4-6-2 steam locomotives operated by the South Australian Railways.
The S type carriages are a corridor-type passenger carriage used on the railways of Victoria, Australia. The first carriages were constructed by the Victorian Railways in 1937 for use on the Spirit of Progress, with additional carriages built for other trains until the mid-1950s.
The Victorian Railways and successors used a variety of railway wagons for the transport motor cars.
As the Victorian Railways' fleet of Z vans began to age, the railways decided to invest in bogie designs for vans. Some van designs were included in a class of new passenger vehicles. Many other vans, for both freight and passenger work, were built separately from any other rolling stock developments, and these are the ones that feature here in detail.
The V type carriages, introduced from 1897, were the first group of Victorian Railways passenger rolling stock to have their own distinct class.
The Bluebird railcars were a class of self-propelled diesel-hydraulic railcar built by the South Australian Railways' Islington Railway Workshops between 1954 and 1959.
The Trans-Australian was an Australian passenger train operated by the Commonwealth Railways initially between Port Augusta and Kalgoorlie on the Trans-Australian Railway line, and later extended west to Perth, and east to Port Pirie and Adelaide.
This article is intended as a catalogue of sleeping carriages used by the Victorian Railways and successors.
In July 1965, Commonwealth Railways placed an order with Commonwealth Engineering, Granville for eight 22.92-metre air-conditioned stainless steel sleeping carriages and one dining carriage for use on the Trans Australian. The first was delivered in July 1966.
Ellen Street railway station was the second of six stations that operated successively between 1875 and the early 2010s to serve the rural maritime town of Port Pirie, 216 km (134 mi) by rail north of Adelaide, South Australia. Soon after construction of the line towards Gladstone began in 1875, an impromptu passenger service commenced. The inaugural station, Port Pirie South, was 800 metres from the centre of the town. Since two tracks had already been laid down the middle of Ellen Street to the wharves, a small corrugated iron shed was erected as a ticket and parcels office. The street-side location was unusual for the South Australian Railways. In 1902, when passenger traffic had increased greatly, a stone building was erected in a striking Victorian Pavilion style. After the tracks were removed in 1967 and the station closed, the building's design assured its retention as a museum of the National Trust of South Australia.
Port Pirie railway station (Mary Elie Street) was the fifth of six railway stations for passengers that operated at various times from 1876 to serve the small maritime town (later city) of Port Pirie, 216 kilometres (134 miles) by rail north of Adelaide, South Australia. As with several of Port Pirie's other stations before it, the station was built to accommodate a change of track gauge on railway lines leading into the town.
Between 1936 and 1942, South Australian Railways built 36 steel carriages at its Islington Railway Workshops. All were painted cream and green being repainted maroon and silver in the 1960s. Aside from a few written off after accidents, all passed to Australian National in March 1978.
The first carriages built specifically for The Overland train service operated by the Victorian and South Australian Railways (V & SAR) were introduced in 1949. By the end of 1951, eight new sleeping cars and six new sitting cars had entered service. Additions to the fleet continued until 1972; in all, 44 carriages were built. About eight were still in service in March 2020 on The Overland operated by Journey Beyond. Other carriages have been transferred to different services or sold.
V&SAR Intercolonial Express Carriages were carriages on a new train called the Intercolonial Express running on Victorian Railways and South Australian Railways in 1887. The track of two railways met on Wednesday 19 January 1887. The Victorian Railways' Western Line to Dimboola, and the South Australian Railways' Wolseley line, met at Serviceton. Since both sides shared the broad gauge of 5'3", an agreement was made between the two railways allowing a pool of carriages, classed O, to be specifically allocated to interstate trains linking the capitals of Melbourne and Adelaide. The operating and maintenance cost of the new train would be funded by both railways, approximately 60% paid for by the Victorian Railways and 40% by the South Australian Railways.
The E type carriages were wooden express passenger carriage used on the railways of Victoria, Australia. Originally introduced by Victorian Railways Chairman of Commissioners Thomas James Tait for the interstate service between Melbourne, Sydney and Adelaide, these Canadian-inspired carriages remained in regular service for 85 years over the entire Victorian network.
The W type carriages were wooden passenger carriages used on the railways of Victoria, Australia.
This article outlines the history and types of passenger rolling stock and guards vans on the narrow-gauge lines of the Victorian Railways in Australia. The types were constructed in parallel with very similar designs.
References
↑ Bray, Vincent & Gregory, Steel & Special Coaching Stock of Victoria, 2009, ISBN978-0-9775056-8-5, p.141
1 2 3 New Ideas for Australia's Trains 1929 to 1973, William P Holmesby, 2003, ISBN0-909650-59-4, p.12
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
