Victorian Railways M class (diesel-hydraulic)

Last updated

Victorian Railways M Class
Type and origin
Power type Diesel-hydraulic
Builder Victorian Railways
Specifications
Configuration:
   Whyte 0-6-0
Gauge 5 ft 3 in (1,600 mm)
Length8.45 m (27 ft 9 in)
Loco weight31.00 t (30.51 long tons; 34.17 short tons)
Prime mover EMD 6-71 6080
Performance figures
Maximum speed20 km/h (12 mph)
Power output112 kilowatts (150 hp)
Career
Number in class2
NumbersM231, M232
First run1959

The Victorian Railways M class are a diesel-hydraulic powered railway shunting locomotive, based at the Newport workshops of the Victorian Railways in Victoria, Australia.

For a period of time the VR had been using old steam locomotives that were past their best to shunt at their Newport workshops, and decided to construct two small shunting locomotives for use at their workshop facilities.

Built by the Victorian Railways themselves, with a Diesel-hydraulic transmission powered by an 112 kilowatts (150 hp) EMD power unit, the two engines were given class M and the numbers were 231 and 232. After one trialled at Mildura, both worked their entire operational lives exclusively in the Newport Workshops compound. When introduced both wore red with a yellow stripe livery, but later changed to the traditional VR livery until they were withdrawn.

After withdrawal they both passed to Steamrail. One is operational and is used as the Steamrail shunter (M231) in the original red and yellow livery, but may soon change to VR blue and gold. The other (M232) is currently stored in the Steamrail compound at Newport Workshops West block, pending restoration to a serviceable condition.

Locomotives

LocomotiveEntered serviceWithdrawnOwnerStatus
M2311959 Steamrail Preserved – Operational
M2321959SteamrailStored

Related Research Articles

<span class="mw-page-title-main">Victorian Railways F class (diesel)</span> Class of diesel locomotives used in Australia

The F Class are a class of diesel locomotive shunters built by Dick Kerr Works for the Victorian Railways between 1951 and 1953. They are similar to the British Rail Class 11 and NS Class 600 shunting locomotives also built by English Electric during this period, but modified for use on the VR's 5 ft 3 in (1,600 mm) broad gauge.

<span class="mw-page-title-main">New Zealand DE class locomotive</span>

The New Zealand DE class was a class of fifteen diesel-electric shunting locomotives, introduced by the New Zealand Railways (NZR) with an intention to replace steam locomotives on shunting duties with diesel power. The class was physically similar to the Tasmanian Government Railways X class, which was also of English Electric design.

<span class="mw-page-title-main">Victorian Railways C class</span>

The C class was a mainline goods locomotive of the 2-8-0 'Consolidation' type that ran on the Victorian Railways between 1918 and 1962. Although its original design had some key shortcomings, a number of improvements were made over the class' long career on the VR, many of which were subsequently applied to other locomotive classes on the system.

<span class="mw-page-title-main">New Zealand DSC class locomotive</span> Heavy shunting locomotive

The New Zealand DSC class locomotive is a heavy shunting locomotive used throughout New Zealand. The class was built in seven batches, the first 18 locomotives being built by British Thomson-Houston of the United Kingdom, with the remainder being built by New Zealand Railways (NZR).

<span class="mw-page-title-main">Victorian Railways K class</span>

The K class was a branch line steam locomotive that ran on Victorian Railways in Australia from 1922 to 1979. Although its design was entirely conventional and its specifications unremarkable, the K class was in practice a remarkably versatile and dependable locomotive. It went on to outlast every other class of steam locomotive in regular service on the VR, and no fewer than 21 examples of the 53 originally built have survived into preservation.

<span class="mw-page-title-main">Victorian Railways N class</span>

The N class was a branch line steam locomotive that ran on the Victorian Railways (VR) from 1925 to 1966. A development of the successful K class 2-8-0, it was the first VR locomotive class designed for possible conversion from 5 ft 3 in to 4 ft 8+12 instandard gauge.

<span class="mw-page-title-main">Victorian Railways R class</span>

The R class was an express passenger steam locomotive that ran on Australia's Victorian Railways (VR) from 1951 to 1974. A long overdue replacement for the 1907-era A2 class 4-6-0, their development and construction was repeatedly delayed due to financial constraints caused by the Great Depression and later the manpower and materials shortages of World War II and the immediate postwar period.

<span class="mw-page-title-main">Victorian Railways J class (1954)</span>

The Victorian Railways J class was a branch line steam locomotive operated by the Victorian Railways (VR) between 1954 and 1972. A development of the successful Victorian Railways K class 2-8-0, it was the last new class of steam locomotive introduced on the VR. Introduced almost concurrently with the diesel-electric locomotives that ultimately superseded them, the locomotives were only in service for a relatively short time.

<span class="mw-page-title-main">New Zealand TR class locomotive</span>

The New Zealand TR class locomotive is a type of diesel shunting locomotives built by many different manufacturers. Defined as "shunting tractors" or "rail tractors" by KiwiRail and its predecessors, they are classified "TR" for tractor as a result. Many of these locomotives have been withdrawn, but some are still in service. The first locomotive of this class was built by NZR in 1924. The most powerful were Japanese-built Hitachi TRs, with 138 kW Cummins engines.

The DD class (later reclassified into D1, D2 and D3 subclasses) was a passenger and mixed traffic steam locomotive that ran on Victorian Railways from 1902 to 1974. Originally introduced on mainline express passenger services, they were quickly superseded by the much larger A2 class and were relegated to secondary and branch line passenger and goods service, where they gave excellent service for the next fifty years. The DD design was adapted into a 4-6-2T tank locomotive for suburban passenger use, the DDE (later D4) class. They were the most numerous locomotive class on the VR, with a total of 261 DD and 58 locomotives built.

<span class="mw-page-title-main">Victorian Railways L class</span> Class of electric locomotives used in Australia

The Victorian Railways L class was a class of electric locomotives built by English Electric and operated by the Victorian Railways and later V/Line from 1953 until 1987 primarily on the Gippsland line. They were the only class of main line electric locomotive operated in Victoria.

<span class="mw-page-title-main">Victorian Railways B class (diesel)</span> Class of 26 Australian diesel-electric locomotives

The B class are a class of diesel locomotives built by Clyde Engineering, Granville for the Victorian Railways in 1952–1953. Ordered and operated by the Victorian Railways, they initiated the dieselisation of the system and saw use on both passenger and freight services, with many remaining in service today, both in preserved and revenue service. Some were rebuilt as the V/Line A class, while others have been scrapped.

<span class="mw-page-title-main">Victorian Railways S class (diesel)</span> Class of 18 Australian diesel-electric locomotives

The S class are a class of diesel locomotives built by Clyde Engineering, Granville for the Victorian Railways between 1957 and 1961.

<span class="mw-page-title-main">Victorian Railways E class (electric)</span>

The Victorian Railways E class was a class of electric locomotive that ran on the Victorian Railways (VR) from 1923 until 1984. Introduced shortly after the electrification of the suburban rail system in Melbourne, Australia, and based on the same electrical and traction equipment as Melbourne's early suburban electric multiple unit fleet, they provided power for suburban goods services and shunting for six decades.

As the Victorian Railways' fleet of Z vans began to age, the railways decided to invest in bogie designs for vans. Some van designs were included in a class of new passenger vehicles. Many other vans, for both freight and passenger work, were built separately from any other rolling stock developments, and these are the ones that feature here in detail.

<span class="mw-page-title-main">New South Wales 73 class locomotive</span>

The 73 class is a diesel-hydraulic locomotive built by Walkers Limited, Maryborough for the New South Wales Department of Railways between 1970 and 1973.

<span class="mw-page-title-main">Victorian Railways W class</span>

The W class are a diesel-hydraulic shunting locomotive ordered and operated by the Victorian Railways of Australia.

<span class="mw-page-title-main">South African Class 61-000</span>

The South African Railways Class 61-000 of 1959 was a diesel-hydraulic locomotive.

<span class="mw-page-title-main">Victorian Railways E class</span>

The E class was a class of suburban tank steam locomotive that ran on Australia's Victorian Railways (VR).

<span class="mw-page-title-main">South Australian Railways steel carriage stock</span> South Australian Railways passenger cars

Between 1936 and 1942, South Australian Railways built 36 steel carriages at its Islington Railway Workshops. All were painted cream and green being repainted maroon and silver in the 1960s. Aside from a few written off after accidents, all passed to Australian National in March 1978.

References