Siemens Nexas

Last updated

Siemens Nexas
Siemens Nexas train arriving at Flinders Street Station.jpg
Refurbished Siemens Nexas 717M-2509T-718M arriving at Flinders Street station, April 2024
Siemens Nexas with PTV seat fabric.jpg
Refurbished interior
In service2003–present
Manufacturer Siemens Transportation Systems
Built atVienna, Austria
Family name Modular Metro
Constructed2002–2005
Entered service3 April 2003
Number built216 carriages (72 sets)
Number in service216 carriages (72 sets)
Formation3-car sets (M–T–M)
Fleet numbers
  • 701M–844M (driving motors)
  • 2501T–2572T (trailers)
Capacity
  • Until 2016: 264 seated per 3-car set
  • Since 2016: 216 seated per 3-car set
Operators Metro Trains Melbourne
Lines served
[1]
Specifications
Car body construction Stainless steel single deck
Train length71.91 m (235 ft 11+1⁄8 in) [2]
Car length
  • M: 24.07 m (78 ft 11+5⁄8 in)
  • T: 23.77 m (77 ft 11+13⁄16 in)
[1]
Width2.95 m (9 ft 8+1⁄8 in)
Height4,141 mm (13 ft 7+1⁄16 in)
Floor height1.23 m (4 ft 7⁄16 in)
DoorsTwin-leaf plug, 2 × 2 per car
Wheel diameter850–770 mm (33–30 in) (new–worn) [3]
Wheelbase 2.6 m (8 ft 6 in) [3]
Maximum speed
  • 147 km/h (91 mph) (design)
  • 115 km/h (71 mph) (service)
Weight
  • 41.5 t (40.8 long tons; 45.7 short tons) (driving motors, tare)
  • 37.8 t (37.2 long tons; 41.7 short tons) (trailers, tare)
Axle load 18.5 t (18.2 long tons; 20.4 short tons)
Traction systemSiemens IGBT–VVVF
Traction motors 8 × Siemens 3-phase AC induction motor
Acceleration
  • 1.2 m/s2 (3.9 ft/s2) (design)
  • 1 m/s2 (3.3 ft/s2) (service)
Deceleration
  • 1 m/s2 (3.3 ft/s2) (service)
  • 1.3 m/s2 (4.3 ft/s2) (emergency)
Electric system(s) 1,500 V DC (nominal) from overhead catenary
Current collector(s) Pantograph
UIC classification Bo′Bo′+2′2′+Bo′Bo′
Bogies SF 5000 E TDG (powered), SF 5000 LDG (trailer) [3]
Minimum turning radius 118 m (387 ft 2 in)
Coupling system Dellner
Track gauge 1,600 mm (5 ft 3 in) broad gauge

The Siemens Nexas is a class of electric multiple units manufactured by Siemens Transportation Systems for the suburban railway network of Melbourne, Australia between 2002 and 2005. The design of the trains was based on the Siemens Modular Metro.

Contents

History

In March 2000, M>Train ordered 62 Siemens Nexas trains to fulfill a franchise commitment to replace its fleet of Hitachi trains. [4] [5] [6]

The original order was for 62 3-car sets, with an option for an additional ten 3-car sets. [7] In December 2002 just before the first was delivered, National Express handed the M>Train franchise back to the Government of Victoria, thus the first Siemens Nexas trains were delivered to the government. All passed to Connex Melbourne in April 2004. The option for ten additional trains was exercised in August 2005, with the last of these delivered in January 2006. [8]

Siemens Rail Services was contracted to provide maintenance of the trains for a period of 15 years (subject to refranchising) at Newport Workshops. With the refranchising of the network to Metro Trains Melbourne in 2009, this maintenance arrangement was retained for an initial three-year period. [7]

They first entered service on 3 April 2003 with the last delivered in January 2006. [7] [9]

Braking problems

A Siemens Nexas train, operated by Connex Melbourne, at Mordialloc station, December 2005 SiemensFrankston.jpg
A Siemens Nexas train, operated by Connex Melbourne, at Mordialloc station, December 2005

In late 2006, the trains suffered a number of braking problems while in service. 14 trains overshot platforms in the space of three days. The units involved in the overshoots were withdrawn from service for checks, and instructions were issued to drivers to minimise further occurrences. [10] By mid-January 2007, a total of 24 three-carriage trains had been impounded for testing, following 20 further incidents of over-running stations since 22 December 2006. [11]

On 13 January 2007, Connex stopped running the Siemens Nexas trains as 3-car sets until the braking problem was resolved, with the result that all services (including at evenings and weekends) were operated by 6-car trains. On 29 January 2007, Connex cancelled 37 peak-period services until further notice, due to the shortage of operational trains. [12]

By 1 February 2007, 38 three-car sets had been withdrawn due to continuing braking failures, meaning that more than half of the Siemens Nexas fleet (about 10% of the total fleet) was out of revenue service. [13] Amidst the media reporting an escalating problem with the risk of the entire fleet potentially having to be suspended, Siemens issued a statement on 31 January 2008 saying that they believed there had been no evidence during investigations that would require the entire fleet of trains being withdrawn from service. [13] In an effort to replicate the brake fault, testing of affected trains was carried out on the Werribee line between Newport and Laverton, with soapy water sprayed onto the rails to increase the amount of wheel slip experienced. [14] The entire fleet was eventually returned to service, although they were not to be run as single (3 car) units.

In December 2008, train operator Connex commenced proceedings in the Supreme Court to claim damages from Siemens. Connex claimed Siemens provided trains with a braking system that was "defective, faulty and inadequate", the trains being "not fit for their purpose" and were not of "merchantable quality".

Two Nexas sets, operated by Connex Melbourne, between Craigieburn and Roxburgh Park, January 2009 (710M-2505T-709M-M-T-M) SiemensCraigieburnRoxburghPark.JPG
Two Nexas sets, operated by Connex Melbourne, between Craigieburn and Roxburgh Park, January 2009 (710M-2505T-709M-M-T-M)

In March 2009, it was reported that three Siemens Nexas trains had been impounded due to new braking incidents in the week prior. [15]

By December 2010, sanding equipment had been trialled on set 773M-2537T-774M in order to improve the braking performance of the trains, [16] and, by February 2011, a number of trains had also been fitted with the equipment. The sand boxes were fitted to the middle two bogies of each 3-car set. [14]

In June 2011, installation of sanding equipment was completed across the entire fleet, and speed restrictions on all Siemens Nexas trains were lifted.

In September 2011, the Office of the Chief Investigator, Transport Safety, found that "the relatively high frequency of overruns involving Nexas trains was neither the result of individual train defects nor any deficiency in train maintenance". [17]

Design and construction

The bodies of the Siemens Modular Metro trains evolved from the 1993 DT2 Series used in the Nuremberg U-Bahn whose design in turn came from production of the A Series built for the nearby Munich U-Bahn.

The version of Siemens metro train designed for Melbourne included several attributes similar to existing Melbourne suburban electric trains such as being single-deck and operating in M-T-M (motor-trailer-motor) sets of three carriages, where the motor cars each have an overhead pantograph, and two of these 3-car sets are generally coupled together to form a 6-carriage train when run in revenue service, though a single set may be run when demand does not merit a full train.

All were built by Siemens Transportation Systems, Vienna, with the final fitout completed at Newport Workshops.

There are several notable differences between the Siemens Nexas trains and other trains which operate in Melbourne. These include:

The Siemens Nexas trains are fitted with a Passenger information system produced by the German firm Annax. The system does not announce service details at the commencement of a journey, express running or the end of services.

In June 2008, Connex started a program to replace the seat coverings in a number of Siemens Nexas trains, using the same type of fabric as used in the X'Trapolis 100 trains, [21] Metro Trains Melbourne has since put in new seating fabric displaying various stations around the network, to almost half the fleet.

Refurbishment

In 2016, Metro Trains Melbourne began refurbishing the interior carriages of Siemens Nexas trains. All windguards and glass screens were removed from the doorways and replaced with a smaller vertical handrail (except where wheelchair access is required), a number of seats removed near the doors and extra vertical and horizontal handrails fitted to improve comfort and capacity. A cleaning program occurred at the same time, which included fitting new seat pads and covers, re-painting walls and applying anti-graffiti film to the windows. As of August 2017, the entire fleet had been refurbished. A similar refurbishment has been completed on the older Comeng trains. In 2019, Metro Trains Melbourne began to replace the Gangway systems. The new Hübner System has at the floor an articulated bridge system instead of the plate system. Also the sound insulation and the behavior of the bellows system has been improved.

In August 2022, Metro Trains Melbourne completed a mid-life refurbishment on two 3-car sets in the fleet, thus comprising one full six-car set (747M-2524T-748M and 809M-2555T-810M). [22] The two coupled sets were first documented running on 22 August 2022. The refurbishment included an updated passenger information system; overhauling the display and the station announcements. Other improvements include updated CCTV, improved lighting, PA upgrades and a brand new interface for emergency driver communication. [23]

Liveries

The Siemens Nexas trains have a stainless steel body, and were seen in a number of different liveries in their early years, owing to the changes in ownership that have occurred while the trains were entering service.

The trains were originally delivered with M>Train blue and green stripes on the side, and the M>Train 'swirl' on the front fairing. Later deliveries entering service in bare metal on the sides, and white front fairings with a green and yellow striped bar. On entering Connex Melbourne ownership, blue and yellow stripes were progressively added to the side of all trains, and front fairings were repainted yellow with the blue Connex logo.

After Metro Trains Melbourne took over the operation of the suburban network in November 2009, the Connex logo on all trains was covered over as a temporary measure, with all sets progressively being repainted into Metro livery, a process completed in March 2010. [24]

In December 2022, Siemens Nexas train 741M-2521T-742M first received the PTV/2022 livery on Siemens Nexas Fleet, featuring removal of company branding, and yellow door outlines (now matching the new HCMT fleet).

Related Research Articles

<span class="mw-page-title-main">Sandringham line</span> Passenger rail service in Melbourne, Australia

The Sandringham line is a commuter railway line in the city of Melbourne, Victoria, Australia. Operated by Metro Trains Melbourne, it is the city's fourth shortest metropolitan railway line at 17.9 kilometres (11.1 mi). The line runs from Flinders Street station in central Melbourne to Sandringham station in the south-east, serving 14 stations via South Yarra, Balaclava, Elsternwick, and Brighton. The line operates from approximately 5am to 12am, daily, with 24 hour service available on Friday and Saturday nights. Services run every 7–8 minutes during peak hour, with services running every 15 minutes during the inter-peak period on weekdays, and every 20 minutes at night and during the day on weekends. Additionally, services run every 60 minutes overnight on Friday and Saturday nights as part of the Night Network. Trains on the Sandringham line run with a two three-car formations of Comeng or Siemens Nexas trainsets.

<span class="mw-page-title-main">Flemington Racecourse line</span> Passenger rail service in metropolitan Melbourne, Victoria, Australia

The Flemington Racecourse line is a commuter railway line in the city of Melbourne, Victoria, Australia. Operated by Metro Trains Melbourne, it is the city's shortest metropolitan railway line at 7.8 kilometres (4.8 mi). The line runs from Flinders Street station in central Melbourne to Flemington Racecourse station, situated next to the racecourse in the city's north west, serving a total of 5 stations. The line operates only during special events, with services as frequent as every 4 minutes during peak periods of those special events. Trains on the Flemington Racecourse line run with two three-car formations of Comeng, Siemens Nexas, or X'Trapolis 100 trainsets.

<span class="mw-page-title-main">Connex Melbourne</span> Melbourne Australian train operator (1997–2009)

Connex Melbourne was a train operator in Melbourne, Australia. Formed in July 1998 as Hillside Trains, a business unit of the Public Transport Corporation, it was privatised in August 1999 becoming a subsidiary of Connex.

<span class="mw-page-title-main">British Rail Class 411</span>

The British RailClass 411 (4CEP) electric multiple units were built at Eastleigh works from 1956–63 for the newly electrified main lines in Kent. These units, which used the British Railways Mark 1 bodyshell, were based on the earlier Southern Railway 4 COR design, built in 1937. Variants of the class 411 design included the class 410 and class 412 4 BEP units, which contained a buffet car in place of a standard trailer. They were later used on services in Sussex and Hampshire; following the privatisation of British Rail in 1995, the units were used by the Connex South Central, Connex South Eastern and South West Trains franchises. They were replaced by Juniper, Desiro, and Electrostar units. The fleet's lifespan was 49 years. These units are the longest-lived BR Mark 1 EMUs.

<span class="mw-page-title-main">British Rail Class 423</span> Class of British electric multiple units

The British Rail Class 423, electric multiple unit passenger trains were mostly built by British Rail (BR) at York Works from 1967 to 1974, although the MBSOs and TSOs of the first 20, 7701-7720, were built at Derby Works. They have manually opening doors next to every seating row and were the last coaching stock built in this pattern for BR. They were mostly found working outer-suburban services in South London and rural services in Kent, Sussex and Hampshire, up to 2005 when they were finally replaced by Electrostar and Desiro units. The fleet had a working life of 38 years.

<span class="mw-page-title-main">British Rail Class 456</span> British electric multiple-unit passenger train

The British Rail Class 456 was an electric multiple unit passenger train introduced by Network SouthEast on inner-suburban services in South London to replace the elderly Class 416 2EPB units. Twenty-four two-car units were built by British Rail Engineering Limited's York Carriage Works in 1990 and 1991.

<span class="mw-page-title-main">Hitachi (Australian train)</span> Melbourne suburban electric multiple unit train

The Hitachi was an electric multiple unit train that operated on the Melbourne suburban railway network between 1972 and 2014. Electrical equipment was supplied by Commonwealth Engineering, to designs by Hitachi of Japan, leading to their official name today, although no Hitachi-supplied components were used in their construction. They were the last suburban trains in Melbourne without air conditioning. A total of 355 carriages were built between 1972 and 1981, including a replacement carriage for one written off while the fleet was still being delivered.

<span class="mw-page-title-main">M-Train</span> Former railway operator in Melbourne, Australia

M>Train was a train operator in Melbourne, Australia, and operated some of the city's suburban rail operations. Formed in July 1998 as Bayside Trains, a business unit of the Public Transport Corporation, it was privatised in August 1999 becoming a subsidiary of National Express.

<span class="mw-page-title-main">British Rail Class 444</span> British electric passenger train

The British Rail Class 444 Desiro is an electric multiple-unit passenger train built by Siemens Transportation Systems in Austria between 2002 and 2004. The Class 444 currently operate on express passenger services for South Western Railway.

<span class="mw-page-title-main">British Rail Class 333</span> Class of British electric multiple unit

The British Rail Class 333 is a class of electric multiple unit (EMU) passenger train built by CAF between 2000 and 2003 for Northern Spirit, with traction equipment supplied by Siemens Transportation Systems. All have passed to subsequent franchises and subsequent operators Northern Rail, Arriva Rail North and Northern Trains.

<span class="mw-page-title-main">Harris (train)</span> Melbourne suburban electric multiple unit train

The Harris trains were the first steel-bodied electric multiple unit (EMU) trains to operate on the suburban railway network of Melbourne, Victoria, Australia. They were introduced in 1956, by the Victorian Railways, and last operated in 1988, although a number of the carriages were converted for other uses and are still operating. They were named after Norman Charles Harris, Chairman of Commissioners of the Victorian Railways, between 1940 and 1950.

<span class="mw-page-title-main">Comeng (train)</span> Electric multiple unit operating on the Melbourne rail network

The Comeng is a class of electric multiple unit (EMU) operating on the suburban railway network of Melbourne. Built by their namesake Commonwealth Engineering, the trains were introduced in 1981 as a replacement for the Tait and Harris trains. In total, 190 three-car trainsets were built, although only 115 remain in service and are expected to be retired by 2030.

The X'Trapolis 100 is a class of single deck electric multiple units part of Alstom's X'Trapolis family of trains, operated in Melbourne, Victoria, Australia and Valparaíso, Chile.

<span class="mw-page-title-main">V/Line Sprinter</span> High speed diesel railcar train used in Victoria, Australia

The Vline Sprinters are diesel railcars which are operated by V/line on its Seymour line service with some also leased to Metro Trains Melbourne for its Stony Point line commuter service. They were built between 1993 and 1995 by A Goninan & Co in Broadmeadow, New South Wales.

<span class="mw-page-title-main">V/Line H type carriage</span> Class of interurban passenger carriage used in Australia

The H type carriages are a class of interurban passenger carriage operated by V/Line in Victoria, Australia. Fitted with high-density 2+3 seating, they were typically used on short distance interurban services from Melbourne to Bacchus Marsh and Geelong until their withdrawal in 2024.

<span class="mw-page-title-main">VicRail N type carriage</span> Intercity passenger carriage used on the railways of Victoria, Australia

The N type carriages are an intercity passenger carriage used on the railways of Victoria, Australia. They were introduced between 1981 and 1984 as part of the 'New Deal' reforms of country passenger rail services. Today they are seen on both V/Line long distance InterCity services, and limited commuter services to Geelong.

<span class="mw-page-title-main">Metro Trains Melbourne</span> Public transport operator in Melbourne, Australia

Metro Trains Melbourne, often known simply as Metro, is the operator and brand name of train services on the electrified metropolitan rail network serving the city of Melbourne, Victoria, Australia. It is the largest urban rail network in Australia, with 17 lines and 221 stations across 405 km (252 mi) of railways, and the second busiest network in Australia, with a patronage of 99.5 million as of 2021–2022.

<span class="mw-page-title-main">Tyne and Wear Metrocar</span> Class 599 light rail vehicles used on the Tyne and Wear Metro

The Tyne and Wear Metrocars are a fleet of light rail vehicles manufactured by Metro-Cammell for the Tyne and Wear Metro in North East England between 1978 and 1981. For operation on Network Rail controlled tracks between Pelaw Junction and Sunderland, they are designated on TOPS as the British Rail Class 599. Most were refurbished between 2010 and 2015 by Wabtec Rail at Doncaster Works and are scheduled to be replaced by Class 555 rolling stock from 2024.

<span class="mw-page-title-main">High Capacity Metro Train</span> Rolling stock in use on the Melbourne rail network

The High Capacity Metro Train (HCMT) is a type of electric multiple unit (EMU) train for use by Metro Trains Melbourne on the Melbourne rail network. The first train set entered service on 27 December 2020 and will become the primary rolling stock used in the Metro Tunnel when it opens in 2025.

<span class="mw-page-title-main">X'Trapolis 2.0</span> Rolling stock under construction for use on the Melbourne rail network

The X'Trapolis 2.0 is a series of electric multiple unit (EMU) trains to be used for Metro Trains Melbourne, part of Alstom's X'Trapolis family. Construction of the trains started in 2024, with testing set to begin in 2025.

References

  1. 1 2 "WTT Network Configuration: Metro Rolling Stock" (PDF). Metro Trains Document Portal. Archived from the original on 21 September 2022. Retrieved 21 August 2024.
  2. ↑ "Metro System, Three-Car Units, Melbourne, Australia". Siemens. Archived from the original on 19 October 2006. Retrieved 18 April 2023.
  3. 1 2 3 "First Class Bogies" (PDF). Siemens . Archived from the original (PDF) on 22 July 2019.
  4. ↑ Siemens Transportation Systems wins major contract in Australia Siemens 1 April 2000
  5. ↑ Bayside trains franchise agreement part 8 Archived 30 August 2007 at the Wayback Machine Government of Victoria
  6. ↑ Annual Report December 2000 Archived 14 October 2011 at the Wayback Machine National Express Group
  7. 1 2 3 Siemens Rail Services (October 2009). "Submission in relation to "The factors leading to and causes of failures in the provision of Metropolitan and V/Line train services"" (PDF). www.parliament.vic.gov.au. Archived (PDF) from the original on 15 March 2011. Retrieved 26 February 2011.
  8. ↑ "Media Release: New Train Hits the Tracks". Minister for Public Transport. 4 October 2005. Archived from the original on 31 August 2007.
  9. ↑ Siemens Archived 29 August 2016 at the Wayback Machine Vicsig
  10. ↑ Moynihan, Stephen (16 November 2006). "Rail crisis as train brakes fail". The Age . Archived from the original on 20 October 2012. Retrieved 31 January 2007.
  11. ↑ Moynihan, Stephen (16 January 2007). "Further brake failures sideline a third of new trains". The Age . Archived from the original on 18 January 2007. Retrieved 31 January 2007.
  12. ↑ Whinnett, Ellen; Mitchell, Geraldine (30 January 2007). "Anger as 37 services derailed". Herald Sun . Melbourne. Archived from the original on 7 October 2008.
  13. 1 2 Moynihan, Stephen (1 February 2007). "Connex may halt fleet today". The Age . Archived from the original on 20 October 2012. Retrieved 31 January 2007.
  14. 1 2 "Siemens brake testing". Wongm's Rail Gallery. railgallery.wongm.com. Archived from the original on 18 July 2011. Retrieved 26 February 2011.
  15. ↑ Lucas, Clay (3 March 2009). "Brake failures stop city trains". The Age . Archived from the original on 3 March 2009. Retrieved 5 March 2009.
  16. ↑ "773M-T-M power through on the West line while testing sanding equipment at Laverton". Vicsig – Photos. Vicsig. Retrieved 26 February 2011.
  17. ↑ "Safety Investigations Rail Reports". Platform Overruns Siemens Nexas EMU Connex / Metro Trains Melbourne. Office of the Chief Investigator. Archived from the original on 21 March 2012. Retrieved 27 March 2012.
  18. ↑ Train Franchise Agreement Volume 2 Archived 1 March 2014 at the Wayback Machine Public Transport Victoria
  19. ↑ "The Problems: Why trains are late". The Age . 29 May 2005. Archived from the original on 1 February 2009.
  20. ↑ "Dissatisfaction – all along the line". The Age . 30 May 2005. Archived from the original on 21 October 2012. Retrieved 19 June 2006.
  21. ↑ "News". Connex Melbourne. 24 June 2008. Archived from the original on 7 October 2008.
  22. ↑ "VICSIG". vicsig.net. Archived from the original on 1 September 2022. Retrieved 1 September 2022.
  23. ↑ A look at the Upgraded Siemens Nexas Set, archived from the original on 1 September 2022, retrieved 1 September 2022
  24. ↑ "Metro Livery Program". Vicsig. Archived from the original on 29 August 2016. Retrieved 14 July 2010.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.