Victorian Railways No.100 (1872)

Last updated

Victorian Railways No.100
Type and origin
Power typeSteam
DesignerWilliam Meikle
Builder VR - Williamstown Workshops
Build date1872
Total produced1
Specifications
Configuration:
​
 •  Whyte 2-4-0
Gauge 5 ft 3 in (1,600 mm) Victorian broad gauge
Leading dia. 4 ft 0 in (1.22 m) [1]
Driver dia.5 ft 0 in (1,520 mm) [1]
Tender wheels4 ft 0 in (1.22 m) [1]
Wheelbase 33 ft 1 in (10.08 m) [1] ​
 • Coupled7 ft 6 in (2,290 mm) [1]
 • Tender11 ft 0 in (3.35 m) [1]
Length:
​
 • Over couplers45 ft 7+1⁄2 in (13.907 m) [1]
Height13 ft 1+1⁄2 in (4.001 m) [1]
Axle load 11  long tons  13 cwt (26,100 lb or 11.8 t) [2]
1904 diagram: 12  long tons  2 cwt (27,100 lb or 12.3 t) [1]
1914 diagram: 12  long tons  9 cwt (27,900 lb or 12.6 t) [3]
Loco weight28  long tons  10 cwt (63,800 lb or 29 t) [2]
1904 diagram: 29  long tons  11 cwt (66,200 lb or 30 t) [1]
1914 diagram: 30  long tons  12 cwt (68,500 lb or 31.1 t) [3]
Tender weight23  long tons  15 cwt (53,200 lb or 24.1 t) [2]
1904 diagram: 27  long tons  10 cwt (61,600 lb or 27.9 t) [1]
1914 diagram: 28  long tons  0 cwt (62,700 lb or 28.4 t) [3]
Total weight52  long tons  5 cwt (117,000 lb or 53.1 t) [2]
1904 diagram: 57  long tons  1 cwt (127,800 lb or 58 t) [1]
1914 diagram: 58  long tons  12 cwt (131,300 lb or 59.5 t) [3]
Fuel capacity60  long cwt (6,700 lb or 3,000 kg) [2]
1904 diagram: 95  long cwt (10,600 lb or 4,800 kg) [1]
Water cap.1,948 imp gal (8,860 L; 2,339 US gal) [2]
1904 diagram: 1,975 imp gal (8,980 L; 2,372 US gal) [1]
Firebox:​
 • Grate area12.08 sq ft (1.122 m2) [2]
1904 diagram: 14.30 sq ft (1.329 m2) [1]
Boiler pressure130  psi (896  kPa) [4]
1914 diagram: 140  psi (965  kPa) [3]
Heating surface:​
 • Firebox86.03 sq ft (7.992 m2) [2]
1904 diagram: 83.70 sq ft (8 m2) [1]
 • Tubes1,082.21 sq ft (100.541 m2) [2]
1904 diagram: 1,088.10 sq ft (101 m2) [1]
 • Total surface1,168.24 sq ft (109 m2) [2]
1904 diagram: 1,171.80 sq ft (109 m2) [1]
Cylinders 2, inside
Cylinder size 16 in × 22 in (406 mm × 559 mm) [2]
Performance figures
Tractive effort 1904 diagram: 9,762  lbf (43.42  kN) [1]
1914 diagram: 10,513  lbf (46.76  kN) [3]
Career
Operators Victorian Railways
Number in class1
Numbers100
Delivered1872
First run24 January 1872
Last run1916
(44.4 years)
Withdrawn1916
DispositionScrapped

The Victorian Railways No. 100 was the first government built steam locomotive on Victorian Railways. It was a 2-4-0 passenger locomotive operated by the Victorian Railways between 1872 and 1916, built by Williamstown Workshops.

Contents

History

From the late 1860s, the Victorian Railways used odd numbers for goods locomotives and even numbers for passenger locos, this engine was numbered 100. [4] This odd and even system remained in use until 1912. In 1886, they were allocated to Class E, but became unclassed again in 1889 when that letter was allotted to the Kitson tanks. [4]

Production

This locomotive was built in 1872 following a recommendation from a Board of Enquiry that tradesmen could be employed in their spare time in the manufacture of locomotives. [4]

Regular service

It was used for passenger services on the Bendigo and North-Eastern lines before it was eventually being used exclusively on the Governor's and later Railway Commissioners' special inspection trains. [4]

Design improvements

Over the years they were fitted with various alterations to the cabs. There were also various upgrades over the years; with constant improvements to safety — these including things like updates to safety valves (and domes), smokeboxs and chimneys (with spark arrestors), and brakes.
It received a new boiler of same pressure in 1885, and another larger one in 1904 with a working pressure of 140psi. [4]

Accidents

Demise

It was withdrawn in 1916. [4]

Fleet summary

Key:In servicePreservedStored or withdrawnScrapped
LocomotivePrevious numbersBuilder no.Entered serviceWithdrawnScrappedStatusNotes
100E100-24 January 187219161916ScrappedReboilered - 1885. Reboilered - 1904 [4]

Related Research Articles

<span class="mw-page-title-main">Victorian Railways X class</span> Class of 29 Australian 2-8-2 locomotive

The Victorian Railways X class was a mainline goods locomotive of the 2-8-2 'Mikado' type operated by the Victorian Railways (VR) between 1929 and 1960. They were the most powerful goods locomotive on the VR, aside from the single H class, H220, which was confined to the North East line, until the advent of diesel-electric traction, and operated over the key Bendigo, Wodonga, and Gippsland mainlines.

<span class="mw-page-title-main">Victorian Railways J class (1954)</span>

The Victorian Railways J class was a branch line steam locomotive operated by the Victorian Railways (VR) between 1954 and 1972. A development of the successful Victorian Railways K class 2-8-0, it was the last new class of steam locomotive introduced on the VR. Introduced almost concurrently with the diesel-electric locomotives that ultimately superseded them, the locomotives were only in service for a relatively short time.

<span class="mw-page-title-main">Victorian Railways AA class</span>

The AA class was an express passenger locomotive that ran on the Victorian Railways between 1900 and 1932. The largest, heaviest and most powerful 4-4-0 steam locomotive to run in Australia, it was the final development of this locomotive type in Australia.

<span class="mw-page-title-main">Victorian Railways B class (1861)</span> Class of 34 Australian 2-4-0 steam locomotives

The Victorian Railways B class was a class of 2-4-0 passenger locomotives operated by the Victorian Railways (VR) between 1862 and 1917, built by various builders. The B class locomotives are regarded as the first mainline VR motive power, and were highly successful in passenger operations.

The Victorian Railways V class of 1857 was a class of 0-6-0 goods locomotives operated by the Victorian Railways between 1858 and 1904, built by George England and Co., Newcastle upon Tyne, England.

<span class="mw-page-title-main">Victorian Railways F class (1874)</span>

The Victorian Railways F class was originally a class of 2-4-0 light line passenger locomotives operated by the Victorian Railways between 1874 and 1929.

The Victorian Railways X class was a class of 0-6-0 mainline goods locomotives operated by the Victorian Railways between 1886 and 1920.

The Victorian Railways G class was a class of 4-4-0 light line passenger locomotives operated by the Victorian Railways between 1877 and 1904.

The Victorian Railways H class was a class of 4-4-0 light line passenger locomotives operated by the Victorian Railways between 1877 and 1916.

<span class="mw-page-title-main">Victorian Railways D class (1887)</span>

The D class of 1887 were Phoenix-built locomotives to be used on Victorian Railways.

The D class of 1876 was the first example of American-built locomotives to be used on Victorian Railways, and among the first such engines to operate in Australia.

The Victorian Railways No. 1 was the first government passenger steam locomotive on Victorian Railways. It was a 2-2-2 passenger locomotive operated by the Victorian Railways between 1858 and 1890 and again between 1893 and 1904, built by George England and Co., Newcastle upon Tyne, England.

The Victorian Railways J class of 1859 was a class of 2-2-2 main line passenger locomotives operated by the Victorian Railways between 1860 and 1912, built by Beyer, Peacock & Company, Manchester, England.

The Victorian Railways P class was a class of 0-6-0 goods locomotives operated by the Victorian Railways between 1860 and 1921, built by Beyer, Peacock & Company, Manchester, England.

The Victorian Railways L class was a class of 2-4-0ST passenger locomotives operated by the Victorian Railways between 1861 and 1906, built by both George England and Co., Newcastle upon Tyne, England and Slaughter, Gruning & Co., Bristol, England.

The Geelong & Melbourne Railway Company operated a total of 1 locomotive that fell under the Whyte notation of 0-4-0T, with a Vertical boiler, between 1855 and 1860. Later it was operated by the Victorian Railways between 1860 and 1893. This was the second locomotive manufactured in Australia.

The Geelong and Melbourne Railway Company operated a total of four 2-2-2WT locomotives between 1856 and 1860. They were later operated by the Victorian Railways between 1860 and 1889.

<span class="mw-page-title-main">Victorian Railways O class (1861)</span> Class of 44 Australian 0-6-0 steam locomotives

The Victorian Railways O class was a class of 0-6-0 goods locomotives operated by the Victorian Railways between 1862 and 1922, built by various builders.

This was a group of 18 2-4-0WT passenger steam locomotives, built by Robert Stephenson & Company.

References

Specific

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Victorian Railways Rolling Stock Branch: Diagrams & Particulars of Locomotives, Cars, Vans & Trucks (1904 ed.). Vic: Victorian Railways. 1904. p. 9.
  2. 1 2 3 4 5 6 7 8 9 10 11 Cave, Norman; Buckland, John; Beardsell, David (2002). Steam Locomotives of the Victorian Railways. Vol. 1: The First Fifty Years. Melbourne, Vic: ARHS Victoria Division. p. 55. ISBN   1876677384.
  3. 1 2 3 4 5 6 Victorian Railways Rolling Stock Branch: Diagrams & Particulars of Locomotives, Cars, Vans & Trucks (1914 ed.). Vic: Victorian Railways. 1914. p. 10.
  4. 1 2 3 4 5 6 7 8 9 Cave, Norman; Buckland, John; Beardsell, David (2002). "Chapter 6". Steam Locomotives of the Victorian Railways. Vol. 1: The First Fifty Years. Melbourne, Vic: ARHS Victoria Division. ISBN   1876677384.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.