Traditional French units of measurement

Last updated
Woodcut dated 1800 illustrating the new decimal units which became the legal norm across all France on 4 November 1800 Systeme-Metrique.jpg
Woodcut dated 1800 illustrating the new decimal units which became the legal norm across all France on 4 November 1800

The traditional French units of measurement prior to metrication were established under Charlemagne during the Carolingian Renaissance. Based on contemporary Byzantine and ancient Roman measures, the system established some consistency across his empire but, after his death, the empire fragmented and subsequent rulers and various localities introduced their own variants. Some of Charlemagne's units, such as the king's foot (French : pied du Roi) remained virtually unchanged for about a thousand years, while others important to commercesuch as the French ell (aune) used for cloth and the French pound (livre) used for amountsvaried dramatically from locality to locality. By the 18th century, the number of units of measure had grown to the extent that it was almost impossible to keep track of them and one of the major legacies of the French Revolution was the dramatic rationalization of measures as the new metric system. The change was extremely unpopular, however, and a metricized version of the traditional unitsthe mesures usuelles had to be brought back into use for several decades.

Contents

History

Table of the measuring units used in the 17th century at Pernes-les-Fontaines in the covered market at Provence-Alpes-Cote d'Azur region of southeastern France Pernes - Mesures anciennes.JPG
Table of the measuring units used in the 17th century at Pernes-les-Fontaines in the covered market at Provence-Alpes-Côte d'Azur region of southeastern France

Although in the pre-revolutionary era (before 1795) France used a system and units of measure that had many of the characteristics of contemporary English units (or the later Imperial System of units), France still lacked a unified, countrywide system of measurement. Whereas in England Magna Carta had decreed that "there shall be one unit of measure throughout the realm", Charlemagne and successive kings had tried but failed to impose a unified system of measurement in France. [1]

The names and relationships of many units of measure were adopted from Roman units of measure, and many more were added – it has been estimated that there were seven or eight hundred different names for the various units of measure. Moreover, the quantity associated with each unit of measure differed from town to town and even from trade to trade. Some of the differences were large: for example the lieue (league) could vary from 3.268 km in Beauce to 5.849 km in Provence. It has been estimated that on the eve of the Revolution a quarter of a million different units of measure were in use in France. [2] Although certain standards, such as the pied du Roi (the King's foot) had a degree of pre-eminence and were used by savants , many traders chose to use their own measuring devices, giving scope for fraud and hindering commerce and industry. [1]

Tables of units of measure

17th-century engraving of the Grand Chatelet Grand Chatelet 1650.jpg
17th-century engraving of the Grand Châtelet
Flood levels at the pont Wilson at Tours in both metres and pied royal Tours pont Wilson reperes hauteurs Loire.jpg
Flood levels at the pont Wilson at Tours in both metres and pied royal

These definitions use the Paris definitions for the coutume of Paris, [3] and definitions for other Ancien régime civil jurisdictions varied, at times quite significantly.

Length

The medieval royal units of length were based on the toise, and in particular the toise de l'Écritoire, the distance between the fingertips of the outstretched arms of a man, which was introduced in 790 by Charlemagne. [4]

The toise had 6 pieds (feet) each of 326.6 mm (12.86 in). In 1668 the reference standard was found to have been deformed, and it was replaced by the toise du Châtelet which, to accommodate the deformation of the earlier standard, was around 11 mm (0.55%) shorter.

In 1747 this toise was replaced by a new toise of near-identical length – the Toise du Pérou, custody of which was given to l'Académie des Sciences au Louvre. [5]

Although the pouce (inch), pied (foot) and toise (fathom) were fairly consistent throughout most of pre-revolutionary France, some areas had local variants of the toise. Other units of measure such as the aune (ell), the perche (perch or rood), the arpent and the lieue (league) had a number of variations, particularly the aune (which was used to measure cloth). [6]

The loi du 19 frimaire an VIII (Law of 10 December 1799) states that one decimal metre is exactly 443.296 French lines, or 3 pieds 11.296 lignes de la "Toise du Pérou". [7] Thus the French royal foot is exactly 9000/27 706 metres (about 0.3248 m). [8]

In Quebec, the surveys in French units were converted using the relationship 1 pied (of the French variety, the same word being used for English feet as well) = 12.789 English inches. [9] This makes the Quebec pied very slightly smaller (about 4 parts in one million) than the pied used in France.

Table of length units
UnitRelative
value
(pieds)
SI
value
(approx.)
Imperial
value
(approx.)
Notes
point 117280.188 mm7.401 thou112 of a ligne. This unit is usually called the Truchet point in English. Prior to the French Revolution the Fournier point was also in use. It was 16 of a ligne or 1864 of the smaller French foot.
ligne 11442.256 mm88.81 thou112 of a pouce. This corresponds to the line, a traditional English unit.
pouce 11227.07 mm1.066 in112 of a pied du roi. This corresponds to the inch, a traditional English unit.
pied du roi132.48 cm1.066 ftCommonly abbreviated to pied, this corresponds to the foot, a traditional English unit. Known in English as the Paris foot (properly a separate, shorter unit), the royal foot, or French foot.
toise 61.949 m6.394 ft, or
2.131 yd
Six pieds du roi. This corresponds to the fathom, a traditional English unit. Unlike the fathom, it was used in both land and sea contexts.
The Toise du Chatelet was introduced in 1668 and defined by an iron bar on the Grand Chatelet. This was replaced by the Toise du Perou in 1766. [10]
Paris
perche d'arpent227.146 m7.815 ydRelated to, but not directly corresponding with, the English perch or rod (which is 16+12 feet, approximately three-quarters of the French perche).
arpent 22071.46 m78.15 ydTen perches.
lieue ancienne10 0003.248 km2.018 milesThis is an old French league, defined as 10 000 (a myriad) pieds. It was the official league in parts of France until 1674.
lieue de Paris12 0003.898 km2.422 milesThis league was defined in 1674 as exactly 2000 '. After 1737, it was also called the "league of bridges and roads" (lieue des Ponts et des Chaussées).
lieue des Postes13 2004.288 km2.664 milesThis league is 2200 toises or 60 arpents. It was created in 1737.
lieue de 25 au degré~13 6924.448 km2.764 milesLinked to the circumference of the Earth, with 25 lieues making up one degree of a great circle. (Compare the international nautical mile, of which 60 make one degree; one lieue therefore equaling 2.4 nautical miles.) It was measured by Picard in 1669 to be 2282 toises.
lieue tarifaire14 4004.678 km2.907 milesThis league is 2400 toises. It was created in 1737.
North America
perche du roi185.847 m6.394 ydThis perch was used in Quebec and Louisiana
arpent (du roi)18058.47 m63.94 ydTen perches du roi.
Local
perche ordinaire206.497 m7.105 ydThis perch was used locally.
arpent (ordinaire)20064.97 m71.05 ydTen perches ordinaires.

Area

Table of area units
UnitRelative
value
(pieds carrés)
SI
value
Imperial
value
Notes
pied carré1~1055 cm2~1.136 sq ftThe French square foot
toise carrée36~3.799 m2~40.889 sq ft, or
~4.543 sq yd
The French square fathom
Paris
perche d'arpent carrée484~51.07 m2~61.08 sq ydThis was the main square perch in old French surveying. It is a square 22 pieds du roi on each side.
vergée 12 100~1277 m2~1527 sq ydA square 5 perches on each side, or one quarter of an acre.
acre , or
arpent carré
48 400~5107 m2~6108 sq yd, or
~1.262 acres
The French acre is a square 10 perches (one arpent) on each side. (Does not exactly correspond to the English acre, which is defined as 43 560 square feet.)
North America
perche du roi carrée324~34.19 m2~40.89 sq ydThis square perch was used in Quebec and Louisiana. It is a square 18 pieds du roi on each side.
vergée (du roi)8100~854.7 m2~1022 sq ydA square 5 perches du roi on each side.
acre (du roi), or
arpent carré
32 400~3419 m2~4089 sq yd, or
~0.8448 acres
A square 10 perches du roi on each side. Certain U.S. states have their own official definitions for the (square) arpent, which vary slightly from this value.
Local
perche (ordinaire) carrée400~42.21 m2~50.48 sq ydThis square perch was used locally. It is a square 20 pieds du roi on each side.
vergée (ordinaire)10 000~1055 m2~1262 sq ydA square 5 perches ordinaires on each side.
acre (ordinaire), or
arpent carré
40 000~4221 m2~5048 sq yd, or
~1.043 acres
A square 10 perches ordinaires on each side.

Volume – liquid measures

Table of (liquid) volume units
UnitRelative
value
(pintes)
SI
value
U.S.
value
Imperial
value
Notes
roquille132~29.75 mlOne quarter of a poisson.
poisson18~119 mlA measure equal to a half a demiard. There were different sizes based on the commodity measured: poisson de vin (wine), poisson de eau de vie (brandy), or poisson de lait (milk). [11]
demiard 14~238 ml~0.5 pintdemi in French means "half": in this case, half a chopine, and – coincidentally – also approximately half a US pint [237 ml].
chopine12~476.1 ml~1 pint~0.84 pint
pinte1~952.1 ml~2.01 pint~1.68 pintAlthough etymologically related to the English unit pint, the French pint is about twice as large. It was the main small unit in common use, and measured 136 of a cubic pied du roi.
quade2~1.904 L~0.5 gallon~0.42 gallon
velte8~7.617 L~2.01 gallon~1.68 gallona velte was a measuring stick that was inserted into a cask or barrel to determine its depth.
quartaut72~68.55 L9 veltes, or two cubic pieds du roi.
feuillette144~137.1 L
muid288~274.2 LEight cubic pieds du roi.
cubic
pouce cube148~19.84 mlThe French cubic inch.
pied cube36~34.28 LThe French cubic foot. In ancient times, a cubic foot was also known as an amphora when measuring liquid volume.

Volume – dry measures

Table of (dry) volume units
UnitRelative
value
(boisseaux)
SI
value
Imperial
value
U.S.
value
Notes
litron116793.5 cm30.1745 imp gal0.1801 U.S. dry gal14 of a quart. The litre is etymologically related to this unit.
quart143.174 dm30.698 imp gal0.721 U.S. dry gal14 of a boisseau.
boisseau112.7 dm32.8 imp gal2.9 U.S. dry galAlthough etymologically related to the English unit bushel, the French bushel is about one third the size. A boisseau was defined as 1027 of a cubic pied du roi.
minot 338.09 dm38.38 imp gal8.65 U.S. dry gal
mine676.17 dm316.76 imp gal17.29 U.S. dry gal
setier12152.3 dm333.5 imp gal34.6 U.S. dry gal
muid1441.828 m3402 imp gal415 U.S. dry gal
cubic
pouce cube1640~19.84 cm3~1.211 cu inThe French cubic inch.
pied cube2+710~34.28 dm3~2,092 cu inThe French cubic foot. Exactly 2.7 boisseaux.

Weight

The Parisian equivalents (in livres) of 100 local livres in various towns in 1768 [12]
(approximations per source)
Abbeville9394
Avignon83
Beaucare95
Bordeaux100
Bourg-en-Bresse96
Dunkirk87
Lille8788
Lyon87
Marseilles81
Montepellier83
Nancy9495
Nantes101102
La Rochelle101102
Rouen (poids de vicomté)103
Strasbourg (petit poids)96
Toulouse84
Differences between the nominal and actual weights (in marcs moyens) in the parts of the pile de Charlemagne as measured by Jean-Charles de Borda [13]
Nominal
(marcs)
Error in actual
(grains)
20+1.4
14+4.5
8-0.4
4-2.1
2-1.0
1 (creux)-0.7
1 (plein)-1.7

Charlemagne's system had 12 onces (ounces) to the livre (pound). [14] Between 1076 and 1093 Philip I (1052–1108) instituted a system of poids de marc (mark weight) used for minting coin, with 8 onces to a marc. [14]

Jean II (1319–1364) constructed a new standard of measures, including a livre actuelle ("current" pound, also known as a livre de poids de marc or "mark weight" pound) of 2 marcs, i.e. 16 onces. [15] The Charlemagne 12-ounce livre became known as the livre esterlin ("true" pound) in order to distinguish it. [16] [17] ″Esterlin″ was an Old French word (ca. 1190, Anglo-Norman dialect) that referred to Scottish coin (sterling, or ″denier″). [18] As references cited later on this page show, its application changed over time in accordance with the changing historical context, though it is not current in Modern French.

The livre actuelle could be sub-divided into 2 demi-livres (half-pounds), 4 quarterons, or 8 demi-quarterons. [19] Conversely, there were 100 livres in a quintal (c.f. English hundredweight). [19] The fractional parts of an once had different names in Apothecary measure (used in medicine) and measure of precious metals, but the fractional ratios were themselves the same: 1 once was 8 drachme (Apothecary, c.f. English dram) or gros; 1 drachme/gros was 3 scruples (Apothecary, c.f. English scruple) or deniers, and 1 scruple/denier was 24 grains . [20] [21] This makes 384 deniers in a livre in weight measure, which contrasts with the old monetary livre in France which was divided into 240 deniers. [22]

Jean II's standards are preserved in the Conservatoire Nationale des Arts et Métiers, which also holds a set of later-still physical standards from the 15th century, the so-called pile de Charlemagne. [21] [23] This pile defined the weight of 50 marcs, i.e. 400 onces, and thus 25 livres actuelles, or 3313livres esterlins. [14] [24] It had been kept in the royal palaces originally. [25] In 1540 François I (1494–1547) had transferred it to the Cour des monnaies, where it had been held in a cabinet with three locks, whose keys had been held separately by the president of the Cour, one of its counsellors, and a clerk. [25]

The thirteen individual pieces that made up the Parisian pile de Charlemagne comprised an outer containing cylinder nominally weighing 20 marcs, and a set of hollow nesting cups within, topped with a filled weight as the smallest piece. [24] [26] [27] The heaviest cups were nominally 14, 8, 4, and 2 marcs, sub-totalling 48 marcs (including the 20 marc outer container); followed by a nominally 1 marc hollow cup which was termed the marc creux (hollow mark); and followed by 6 further cups (4, 2, and 1 onces, and 4, 2, and 1 gros) with a final seventh filled 1 gros weight, all totalling 1 marc, which was termed the marc plein (filled mark). [24] [26] [28] [27]

Unfortunately, the weights were not consistent, with the marc plein not being the same weight as the marc creux, and neither being the same as a mean 1 marc weight determined from the weight of the whole pile. [24] [28] So when the time came to work out the conversion factors between these measures and the metric system, the whole pile was taken to define 50 Parisian standard marcs, and thus 230 400 grains (the number of grains in 50 marcs). [24] Louis Lefèvre‑Gineau initially determined that the metric weight of the whole pile was 12.227 947 5 kg, [28] later corrected to 12.2376 kg, [29] thereby making (by division and rounded to three decimal places) a marc 244.753 g, a livre esterlin 367.129 g, and a livre actuelle 489.506 g. [20] [30] Hence further the (Parisian) once was 30.594 g, the gros/drachme was 3.824 g, the denier/scruple was 1.274 g, and the grain was 0.053 g. [19] [16]

However, the actual weights of the pre-metric measures were nowhere near even this simple. [31] These were just the Parisian standards, and individual provinces, cities, and even guilds, all had their own reference physical standards, which were not checked against one another and which sometimes conflated esterlin and actuelle. [31] For just some examples: the Marseille livre was 399.6 g, the Montpelier one 394.9 g, the Toulon one 465.5 g, and the Toulouse one 413.2 g; with all of the fractional subdivisions having different values accordingly. [32] The Limoges marc was 240.929 g, the Tours one 237.869 g, and the Troyes one 250.050 g. [33]

Furthermore, there were also livres comprising different numbers of onces to both the actuelle and esterlin, including livres of 14, 18, and 20 onces, confusing things yet further. [34] The livre in the poids de table (table weight) systems used in Provence and Languedoc (and a common name for provincial weight systems in general alongside poids de pays, country weight, and poids de ville, town weight) was the same weight as 15 onces or even as low as 13 onces in the Parisian poids de marc, [35] [36] [37] [12] and the livre in the poids de soie (silk weight) system of Lyon was similarly just 1516 the weight of the Parisian livre. [38] [12] This caused an erroneous belief that these livres comprised 13, 14, or 15 onces, however this was a confusion stemming from the equivalent poids de marc weights, and both poids de table and poids de soie had 16 of their own, lighter, onces and so forth, [38] [36] [12] Rouen had a poids de vicomté system. [12]

See also

Related Research Articles

<span class="mw-page-title-main">International Bureau of Weights and Measures</span> Intergovernmental measurement science and measurement standards setting organisation

The International Bureau of Weights and Measures is an intergovernmental organisation, through which its 59 member-states act on measurement standards in areas including chemistry, ionising radiation, physical metrology, as well as the International System of Units (SI) and Coordinated Universal Time (UTC). It is based in Saint-Cloud, near Paris, France. The organisation has been referred to as IBWM in older literature.

The General Conference on Weights and Measures is the supreme authority of the International Bureau of Weights and Measures (BIPM), the intergovernmental organization established in 1875 under the terms of the Metre Convention through which member states act together on matters related to measurement science and measurement standards. The CGPM is made up of delegates of the governments of the member states and observers from the Associates of the CGPM. It elects the International Committee for Weights and Measures as the supervisory board of the BIPM to direct and supervise it.

<span class="mw-page-title-main">Litre</span> Unit of volume

The litre or liter is a metric unit of volume. It is equal to 1 cubic decimetre (dm3), 1000 cubic centimetres (cm3) or 0.001 cubic metres (m3). A cubic decimetre occupies a volume of 10 cm × 10 cm × 10 cm and is thus equal to one-thousandth of a cubic metre.

<span class="mw-page-title-main">Metre</span> SI unit of length

The metre is the base unit of length in the International System of Units (SI). Since 2019, the metre has been defined as the length of the path travelled by light in vacuum during a time interval of 1/299792458 of a second, where the second is defined by a hyperfine transition frequency of caesium.

<span class="mw-page-title-main">Metrication</span> Conversion to the metric system of measurement

Metrication or metrification is the act or process of converting to the metric system of measurement. All over the world, countries have transitioned from local and traditional units of measurement to the metric system. This process began in France during the 1790s, and has persistently advanced over two centuries, accumulating into 95% of the world officially only using the modern metric system. Nonetheless, this also highlights that certain countries and sectors are either still transitioning or have chosen not to fully adopt the metric system.

<span class="mw-page-title-main">Metre Convention</span> 1875 international treaty

The Metre Convention, also known as the Treaty of the Metre, is an international treaty that was signed in Paris on 20 May 1875 by representatives of 17 nations: Argentina, Austria-Hungary, Belgium, Brazil, Denmark, France, Germany, Italy, Peru, Portugal, Russia, Spain, Sweden and Norway, Switzerland, Ottoman Empire, United States of America, and Venezuela.

<span class="mw-page-title-main">Metrology</span> Science of measurement and its application

Metrology is the scientific study of measurement. It establishes a common understanding of units, crucial in linking human activities. Modern metrology has its roots in the French Revolution's political motivation to standardise units in France when a length standard taken from a natural source was proposed. This led to the creation of the decimal-based metric system in 1795, establishing a set of standards for other types of measurements. Several other countries adopted the metric system between 1795 and 1875; to ensure conformity between the countries, the Bureau International des Poids et Mesures (BIPM) was established by the Metre Convention. This has evolved into the International System of Units (SI) as a result of a resolution at the 11th General Conference on Weights and Measures (CGPM) in 1960.

<span class="mw-page-title-main">Gram</span> Metric unit of mass

The gram is a unit of mass in the International System of Units (SI) equal to one thousandth of a kilogram.

<span class="mw-page-title-main">Foot (unit)</span> Customary unit of length

The foot is a unit of length in the British imperial and United States customary systems of measurement. The prime symbol, , is commonly used to represent the foot. In both customary and imperial units, one foot comprises 12 inches, and one yard comprises three feet. Since an international agreement in 1959, the foot is defined as equal to exactly 0.3048 meters.

<span class="mw-page-title-main">Livre tournois</span> Medieval French currency

The livre tournois was one of numerous currencies used in medieval France, and a unit of account used in early modern France.

<i>Myria-</i> Obsolete metric prefix

Myria- (symbol my) is a now obsolete decimal metric prefix denoting a factor of 104 (ten thousand). It originates from the Greek μύριοι (mýrioi) (myriad). The prefix was part of the original metric system adopted by France in 1795, but was not adopted when the SI prefixes were internationally adopted by the 11th CGPM conference in 1960.

Mesures usuelles were a French system of measurement introduced by French Emperor Napoleon I in 1812 to act as compromise between the metric system and traditional measurements. The system was restricted to use in the retail industry and continued in use until 1840, when the laws of measurement from 1795 and 1799 were reinstituted.

Gabriel Mouton was a French abbot and scientist. He was a doctor of theology from Lyon, but was also interested in mathematics and astronomy. His 1670 book, the Observationes diametrorum solis et lunae apparentium, proposed a natural standard of length based on the circumference of the Earth, divided decimally. It was influential in the adoption of the metric system in 1799.

<span class="mw-page-title-main">French units of measurement</span> Units of measurement used in France

France has a unique history of units of measurement due to its radical decision to invent and adopt the metric system after the French Revolution.

<span class="mw-page-title-main">Étienne Lenoir (instrument maker)</span>

Étienne Lenoir (1744–1832) was a French scientific instrument maker and inventor of the repeating circle.

<span class="mw-page-title-main">History of the metre</span> Origins and values of the unit of length

The history of the metre starts with the Scientific Revolution that is considered to have begun with Nicolaus Copernicus's publication of De revolutionibus orbium coelestium in 1543. Increasingly accurate measurements were required, and scientists looked for measures that were universal and could be based on natural phenomena rather than royal decree or physical prototypes. Rather than the various complex systems of subdivision then in use, they also preferred a decimal system to ease their calculations.

<span class="mw-page-title-main">History of the metric system</span>

The history of the metric system began during the Age of Enlightenment with measures of length and weight derived from nature, along with their decimal multiples and fractions. The system became the standard of France and Europe within half a century. Other measures with unity ratios were added, and the system went on to be adopted across the world.

The Mint of Navarre and Béarn was formed through the merger of the Mint of Navarre in Saint-Palais, whose construction was originally authorized by Charles the Bad in 1351, and placed under the authority of the Chambre des Comptes of Navarre on 4 January 1527, with the two Mints of Béarn in Pau and Morlaàs, in Béarn, in 1562.

<span class="mw-page-title-main">Joseph Garnier</span> French economist and politician

Joseph-Clément Garnier was a French economist and politician. He was a prolific author and a member of many learned societies. In the last years of his life he was a Senator for Alpes-Maritimes.

The Carolingian pound, also called Charlemagne's pound or the Charlemagne pound, was a unit of weight that emerged during the reign of Charlemagne. It served both as a trading weight and a coinage weight. It had a mass of about 408 g and was introduced in as part of Charlemagne's monetary reform around AD 793/94. This stipulated that 240 denarii were to be minted from one pound weight of silver.

References

  1. 1 2 "History of measurement". Métrologie française. Retrieved 2011-02-06.
  2. Adler 2002, pp. 2–3.
  3. See fr:Droit coutumier en France.
  4. Rowlett.
  5. Février.
  6. Darcy-Bertuletti 2005.
  7. Débarbat.
  8. This can be shown by noting that 27,706 × 16 = 443,296 and that 9 × 16 = 144, the number of lignes in a pied.
  9. Weights and Measures Act, Schedule III
  10. Nelson, Robert A. (December 1981). The Physics Teacher: 597.{{cite journal}}: Missing or empty |title= (help)
  11. Dictionnaire de l'Academie Francais (8th edition)
  12. 1 2 3 4 5 Expilly 1768, p. 712.
  13. Harkness 1888, p. lix.
  14. 1 2 3 Saigey 1834, p. 114.
  15. Saigey 1834, pp. 114–115.
  16. 1 2 Saigey 1834, p. 116.
  17. Blome, Stocking & Watts 1939, p. 30.
  18. Greimas, Algirdas Julien, ed. (1992). "Esterlin". Dictionnaire de l'ancien français: le Moyen Age. Larousse. p. 265.
  19. 1 2 3 Du Mersan 1833, p. 635.
  20. 1 2 Saigey 1834, p. 115.
  21. 1 2 Crease 2011, p. 73.
  22. Garnier 1841a, p. 1356.
  23. Morin 1864, p. 248.
  24. 1 2 3 4 5 Zupko 1990, p. 116.
  25. 1 2 Savary & Savary 1742, p. 26.
  26. 1 2 Witthöft 2018, p. 249.
  27. 1 2 Daumas 1970, p. 207.
  28. 1 2 3 Mongez & de La Métherie 1799, p. 171.
  29. Doursther 1840, p. 427.
  30. Garnier 1841a, p. 1355.
  31. 1 2 Crease 2011, p. 74.
  32. Garnier 1841a, pp. 1355–1356.
  33. Garnier 1841b, p. 1447.
  34. Saigey 1834, pp. 116–117.
  35. Guilhiermoz 1906, p. 402.
  36. 1 2 Peuchet 1801, poids de table.
  37. Kelly 1811, p. 294.
  38. 1 2 Peuchet 1801, poids de soie.

Sources

Further reading