Bunt (baseball)

Last updated
Mark Teahen squares around to bunt. Mark Teahen on July 29, 2009.jpg
Mark Teahen squares around to bunt.

A bunt is a batting technique in baseball or fastpitch softball. Official Baseball Rules define a bunt as follows: "A bunt is a batted ball not swung at, but intentionally met with the bat and tapped slowly within the infield." To bunt, the batter loosely holds the bat in front of home plate and intentionally taps the ball into play. A properly executed bunt will create weak contact with the ball and/or strategically direct it, forcing the infielders to make a difficult defensive play to record an out. [1]

Contents

Technique

The strategy in bunting is to ground the ball into fair territory, as far from the fielders as possible but within the infield. This requires not only physical dexterity and concentration, but also an awareness of the fielders' positions in relation to the baserunner or baserunners, their likely reactions to the bunt, and knowledge of the pitcher's most likely pitches.

The bunt is typically executed by the batter turning his body toward the pitcher and sliding one hand up the barrel of the bat to help steady it. This is called squaring up. Depending on the situation, the batter might square up either before the pitcher winds up, or as the pitched ball approaches the plate. Sometimes, a batter may square up, then quickly retract the bat and take a full swing as the pitch is delivered.

Types

Sacrifice bunt

In a sacrifice bunt, the batter will put the ball into play with the intention of advancing a baserunner, in exchange for the batter being thrown out. The sacrifice bunt is most often used to advance a runner from first to second base, though the runner may also be advanced from second to third base, or from third to home. The sacrifice bunt is most often used in close, low-scoring games, and it is usually performed by weaker hitters. A sacrifice bunt is not counted as an at-bat. In general, when sacrifice bunting, a batter will square to bunt well before the pitcher releases the ball. [2]

Jeremy Hermida of the Florida Marlins attempting to bunt Hermida Bunting.jpg
Jeremy Hermida of the Florida Marlins attempting to bunt

The squeeze play occurs when the batter sacrifices with the purpose of scoring a runner from third base. In the suicide squeeze, in which the runner on third base starts running for home plate as soon as the pitcher starts to pitch the ball, it is integral that the batter bunt the ball successfully, or the runner will likely be tagged out easily. Due to the high-risk nature of this play, it is not often executed, but can often be an exciting moment within the game. Alternatively, in the lower-risk safety squeeze, the runner on third waits for the ball to be bunted before breaking for home. If a runner scores in a squeeze play, the batter may be credited with an RBI. [3]

Bunting for a base hit

A batter may also bunt for a base hit . This is not a sacrifice play, because the batter is trying to reach base safely, without any intention of advancing a runner. A batter may try to bunt for a base hit while there are runners on base. In this case, if the runner advances and the batter is thrown out, and if the official scorer judges that the intention of the batter was to bunt for a base hit, then the batter will not receive credit for a sacrifice bunt. A batter bunting for a base hit will often hold back his bunt while the pitcher begins delivering the ball, in order to surprise the fielders. If successful, the bunt is scored as a hit single. Rarely does a bunt result in a double, [4] and never has one resulted in a triple or home run in MLB. [2] [ failed verification ]

Jacoby Ellsbury bunting EllsburyBunting.JPG
Jacoby Ellsbury bunting

Often when attempting to bunt for a base hit, the batter will begin running as he is bunting the ball. This is called a drag bunt. Left-handed batters perform this more often than right-handed hitters, because their stance in the batter's box is closer to first base, and they do not need to run across home plate, where the ball will be pitched, as they bunt. [5]

The action of squaring to bunt is compromised during a drag bunt, as the feet are not set. Players sometimes get one hand up the barrel, and other times bunt with both hands at the base of the bat. There have been instances of one-handed drag bunts as well; Rafael Furcal has been known to try such a bunt. [5]

Swinging bunt

A swinging bunt occurs when a poorly hit ball rolls a short distance into play, much like a bunt. A swinging bunt is often the result of a checked swing, and only has the appearance of a bunt. It is not a true bunt, and if the scorer judges that the batter intended to hit the ball, it cannot be counted as a sacrifice. There is also a "slug" bunt that is intended to surprise the opposing defense, as the desired effect is a hard-hit ball into the infield defense that is expecting a standard bunt. [6]

Fielding a bunt

Fielding a bunt can be more difficult than fielding a normally batted ball. Bunted balls are typically slow, so fielders must charge the ball to get to it quickly, in order to throw out a runner in time. Well-placed bunts can sometimes be impossible to field, and result in base hits. The tactic in bunting for a base hit is to hit the ball fast enough to get it past the pitcher, but slow enough to not allow time for the other infielders to make a play. Bunting a ball into no-man's land the triangle between the locations of the pitcher, first baseman, and second baseman, or between the pitcher, catcher and third baseman can succeed because of uncertainty among the fielders as to which should field the ball and which should receive the throw to first base. It is not unusual for all three fielders to try to field the ball, and for nobody to cover the bag, or for no one to try to field the ball, assuming someone else will handle it. Teams use a rotation play to defend against the bunt: the first baseman will charge the bunt and the second baseman "rotates" out of his usual position to cover first base and receive the throw. The shortstop covers the base towards which the runner is headed. [7]

Special rules

A foul bunt that is not caught in flight is always counted as a strike, even if it is a third strike and thus results in a strikeout of the batter. This is distinct from all other foul balls which, if not caught in flight, are only counted as a strike if not a third strike. This special exception applies only to true bunts, not on any bunt-like contacts that might occur during a full swing or check-swing. If a batter bunts the ball and his bat hits the ball again after initial contact, it is a dead ball even if by accident. [8]

Additionally, the infield fly rule is not applied to bunts popped-up in the air. Instead, the intentional drop rule (Rule 6.05k) that also applies to line drives can be invoked.

History

It is not known when the bunt was introduced; the earliest known reference to a bunt-like hit appears in the account of a game played in 1864 between the junior squads ("muffins") of the Brooklyn Excelsior and Enterprise clubs: "The feature of the play was the batting of Prof. Bassler of the Enterprise team...Being an original of the first water, he adopted an original theory in reference to batting, which we are obliged to confess is not of the most striking character. His idea is not a bad one though, it being to hit the ball slightly so as to have it drop near the home base, therefore necessitating the employment of considerable skill on the part of the pitcher to get at the ball, pick it up and throw it accurately to first base." [9] But the batting technique now known as the bunt was almost certainly perfected by Dickey Pearce, one of baseball's early stars. For much of his career, Pearce used his 'tricky hit' to tremendous effect as the rules permitted it to roll foul and still be counted as a hit. The bunt was not common until the 1880s, and was not an accepted part of baseball strategy until the 20th century. The bunt has enjoyed periodic waves of popularity throughout baseball history, coinciding with the periodic shifts of dominance between pitching and hitting over the decades. [10]

During periods of pitching dominance, for example, during the dead-ball era or the 1960s, bunting was an important offensive weapon. Conversely, during periods of hitting dominance, for example, the 1990s and 2000s, the value of the bunt has often been questioned. [11] Teams following the "Moneyball" school of baseball thought (such as the Oakland Athletics, the Boston Red Sox, and the 2004–2005 Los Angeles Dodgers) have shown a tendency to shun the sacrifice bunt almost entirely. However, a canvass of the 2002–2005 World Series champions (the 2002 Los Angeles Angels being the "small ball" trendsetter for the 2000s) reveals that each team used bunting frequently in order to overcome power hitting teams.[ citation needed ] Nevertheless, the role of the bunt in baseball strategy is one of the perennial topics of discussion for baseball fans.

Related Research Articles

<span class="mw-page-title-main">Stolen base</span> In baseball, when a runner advances one or more bases before the ball has been batted

In baseball, a stolen base occurs when a runner advances to a base unaided by other actions and the official scorer rules that the advance should be credited to the action of the runner. The umpires determine whether the runner is safe or out at the next base, but the official scorer rules on the question of credit or blame for the advance under Rule 10 of the MLB's Official Rules.

<span class="mw-page-title-main">Softball</span> Team ball sport

Softball is a popular variation of baseball, the difference being that it is played with a larger ball on a smaller field and with only underhand pitches permitted. Softball is played competitively at club levels, the college level, and the professional level. The game was first created in 1887 in Chicago by George Hancock.

In baseball, a sacrifice bunt is a batter's act of deliberately bunting the ball, before there are two outs, in a manner that allows a baserunner to advance to another base. The batter is almost always put out, and hence sacrificed, but sometimes reaches base on an error or fielder's choice. In that situation, if runners still advance bases, it is still scored a sacrifice bunt instead of the error or the fielder's choice. Sometimes the batter may safely reach base by simply outrunning the throw to first; this is not scored as a sacrifice bunt but rather a single.

<span class="mw-page-title-main">Double play</span> Making two outs during the same play in baseball

In baseball and softball, a double play is the act of making two outs during the same continuous play. Double plays can occur any time there is at least one baserunner and fewer than two outs.

<span class="mw-page-title-main">Catcher</span> Defensive position in baseball and softball played behind home plate, facing the field

Catcher is a position in baseball and softball. When a batter takes their turn to hit, the catcher crouches behind home plate, in front of the (home) umpire, and receives the ball from the pitcher. In addition to this primary duty, the catcher is also called upon to master many other skills in order to field the position well. The role of the catcher is similar to that of the wicket-keeper in cricket.

<span class="mw-page-title-main">First baseman</span> Infield defensive position in baseball and softball

A first baseman, abbreviated 1B, is the player on a baseball or softball team who fields the area nearest first base, the first of four bases a baserunner must touch in succession to score a run. The first baseman is responsible for the majority of plays made at that base. In the numbering system used to record defensive plays, the first baseman is assigned the number 3.

<span class="mw-page-title-main">Out (baseball)</span> In baseball, when the umpire rules a batter or baserunner out

In baseball, an out occurs when the umpire rules a batter or baserunner out. When a batter or runner is out, they lose their ability to score a run and must return to the dugout until their next turn at bat. When three outs are recorded in a half-inning, the batting team's turn expires.

<span class="mw-page-title-main">Baseball rules</span>

Throughout the history of baseball, the rules have frequently changed as the game continues to evolve. A few common rules most professional leagues have in common is that four balls is a base on balls, three strikes is a strikeout, and three outs end a half-inning.

<span class="mw-page-title-main">Baseball field</span> Field on which baseball is played

A baseball field, also called a ball field or baseball diamond, is the field upon which the game of baseball is played. The term can also be used as a metonym for a baseball park. The term sandlot is sometimes used, although this usually refers to less organized venues for activities like sandlot ball.

<span class="mw-page-title-main">Covering a base</span> Baseball term

In baseball and softball, part of the infielders' and pitcher's jobs is to cover bases. That is, they stand next to a base in anticipation of receiving the ball thrown from another fielder, so that they may make a play on an opposing baserunner who is approaching that base. On a force play, the fielder covering the base stands with one foot on that base.

Baseball and cricket are the best-known members of a family of related bat-and-ball games. Both have fields that are 400 feet (120 m) or more in diameter between their furthest endpoints, offensive players who can hit a thrown/"bowled" ball out of the field and run between safe areas to score runs (points) at the risk of being gotten out, and have a major game format lasting about 3 hours.

In baseball, interference occurs in situations in which a person illegally changes the course of play from what is expected. Interference might be committed by players on the offense, players not currently in the game, catchers, umpires, or spectators. Each type of interference is covered differently by the rules.

<span class="mw-page-title-main">Batted ball</span> In baseball and softball, a pitched ball that is contacted by the batters bat

In the sports of baseball and softball, a batted ball is a pitch that has been contacted by the batter's bat. Batted balls are either fair or foul, and can be characterized as a fly ball, pop-up, line drive, or ground ball. In baseball, a foul ball counts as a strike against the batter, unless there are already two strikes on the batter, with special rules applying to foul tips and foul bunts. Fly balls are those hit in an arcing manner, with pop-ups being a subset of fly balls that do not travel far. Line drives are batted balls hit on a straight line trajectory, while ground balls are hit at a low trajectory, contact the ground shortly after being hit, and then either roll or bounce. Batted balls, especially line drives, can present a hazard to players, umpires, and spectators, as people have been seriously injured or killed after being struck by batted balls.

A hit and run is a high risk, high reward offensive strategy used in baseball. It uses a stolen base attempt to try to place the defending infielders out of position for an attempted base hit.

<span class="mw-page-title-main">Baseball scorekeeping</span> Recording of details of baseball games

Baseball scorekeeping is the practice of recording the details of a baseball game as it unfolds. Professional baseball leagues hire official scorers to keep an official record of each game, but many fans keep score as well for their own enjoyment. Scorekeeping is usually done on a printed scorecard and, while official scorers must adhere precisely to one of the few different scorekeeping notations, most fans exercise some amount of creativity and adopt their own symbols and styles.

<span class="mw-page-title-main">Small ball (baseball)</span> Baseball offensive strategy

In the sport of baseball, small ball is an informal term for an offensive strategy in which the batting team emphasizes placing runners on base and then advancing them into scoring position for a run in a deliberate, methodical way. This strategy places a high value on individual runs and attempts to score them without requiring extra base hits, or sometimes without base hits at all, instead using bases on balls, stolen bases, sacrifice bunt or sacrifice fly balls, the hit-and-run play, and aggressive baserunning with such plays as the contact play. A commonly used term for a run produced playing small ball is a "manufactured run". This style of play was more often found in National League game situations than in the American League due in large part to the absence of the designated hitter in the National League until the universal adoption of the Designated Hitter.

This is an alphabetical list of selected unofficial and specialized terms, phrases, and other jargon used in baseball, along with their definitions, including illustrative examples for many entries.

The wheel play is a defensive strategy in baseball designed to defend against a sacrifice bunt. The play's name derives from the wheel-like rotation of the infielders.

Slap bunting is an offensive baseball and softball technique wherein the batter attempts "to hit the ball to a place on the infield that's farthest from the place where the out needs to be made".

<span class="mw-page-title-main">Base running</span> In baseball, the act of running from base to base, performed by a member of the team at bat

In baseball, base running is the act of running from base to base, performed by members of the team at bat.

References

  1. Official Baseball Rules
  2. 1 2 "Sacrifice Bunt (SH)". MLB Advanced Media, LP. Archived from the original on 29 October 2016. Retrieved 28 October 2016.
  3. Jason Zinoman (20 August 2006). "A Bunt and a Prayer". The New York Times. Archived from the original on 29 October 2016. Retrieved 28 October 2016.
  4. Mailhot, Jake (19 June 2019). "A Brief History of the Bunt Double". Fangraphs. Retrieved 2021-07-31.
  5. 1 2 James Gentile (10 December 2012). "The Best Bunter of All-Time". Archived from the original on 29 October 2016. Retrieved 28 October 2016.
  6. Travis Coverston (28 December 2015). "Swinging Bunt: Baseball Terminology". Archived from the original on 29 October 2016. Retrieved 28 October 2016.
  7. "Bunt Situation: Runner on First, Play #1--Regular" (PDF). Archived from the original (PDF) on 29 October 2016. Retrieved 28 October 2016.
  8. "Case Play 2013-06:Foul Bunt with Two Strikes (Completed)". 10 July 2013. Archived from the original on 29 October 2016. Retrieved 28 October 2016.
  9. Brooklyn Eagle, September 16, 1864
  10. Randy Leonard (1 October 2014). "Baseball's Long and Complicated Relationship with the Bunt". The Atlantic . Archived from the original on 29 October 2016. Retrieved 28 October 2016.
  11. Bill Littlefield (21 May 2016). "Not Dead Yet: The Unpredictable History of the Baseball's Bunt". Archived from the original on 29 October 2016. Retrieved 28 October 2016.