Caving equipment

Last updated
Caver in an Alabama cave showing common caving wear: coveralls, helmet-mounted lights, heavy boots and gloves. Caving1.jpg
Caver in an Alabama cave showing common caving wear: coveralls, helmet-mounted lights, heavy boots and gloves.

Caving equipment is equipment used by cavers and speleologists to aid and protect them while exploring caves. The term may also be used to refer to equipment used to document caves, such as photographic and surveying equipment. Originally, cave diving equipment was quite limited, but the increasing popularity of caving during the 20th century led to the creation of specialist caving equipment and companies. [1]

Contents

Due to the greatly varying conditions of caves throughout the world there is a multitude of different equipment types and categories. Cavers exploring a largely dry system may wear a fleece one-piece undersuit with a protective oversuit while cavers exploring a very wet cave may opt to use wetsuits. Cavers in large dry systems in the tropics and in desert climates may simply opt to wear shorts and a T-shirt.

History

The earliest cavers in Europe and North America were limited in their explorations by a lack of suitable equipment. Explorers of the early 1800s, when caving began to become more common, caved in tweed suits and used candles for illumination. Exploration was usually limited to drier caves, as there was little to protect cavers from the cold once they became wet. Later, cavers began to adopt miners' lamps, which were designed for underground use and were reasonably reliable, though their light was not especially powerful. Lighting magnesium strips was a popular way of illuminating large chambers. E. A. Martel, a French caver, created a collapsible canvas canoe which he used to explore several caves containing long flooded sections, such as the Marble Arch Cave in Northern Ireland. His expeditionary equipment was described in 1895 as: "a canvas boat, some hundreds of feet of rope-ladders, a light portable folding wooden ladder, ropes, axes, compass, barometer, telephone, map etc." [2] The acetylene lamp—powered by carbide—was one of the main light sources used by cavers during the 20th century. Electric miners' headlamps, powered by lead-acid batteries were later used, eventually superseded by LED lighting, which offers superior duration and brightness and is considerably lighter.

Vertical caving was undertaken with rope ladders. These were cumbersome and unwieldy, especially when wet, and sometimes required teams of donkeys to carry them. The French explorer Robert de Joly pioneered the use of ever lighter rope ladders until developing the Elektron Ladder, a light wire ladder with aluminium rungs. [3] The lightness and portability of these ladders revolutionised the exploration of deep caves, paving the way for the exploration of the Gouffre Berger, the first cave in the world to break the 1 km depth limit. Early systems of ascending ropes were developed by Pierre Chevalier in the Dent de Crolles cave system in France in the late 1930s, Chevalier also being the first to use nylon rope in a cave as opposed to natural fibre rope. Single rope technique (SRT) began to be developed in the US in the 1950s. A similar system was developed in Europe in the late 1960s, which was quickly standardised and is still in use today. SRT offered the advantage of greater speed and versatility in the descent of vertical shafts. (Previously, one caver would have to remain at the head of the final pitch to belay the returning cavers up a ladder climb.)

The increasing popularity of caving during the 1960s and 1970s led to the creation of specialist caving equipment companies, such as Petzl. Previously, cavers adapted equipment from other sources, such as miners' helmets and electric lamps, or made their own equipment. Caving equipment made today conforms to high safety standards, decreasing injuries and fatalities.

Protective clothing

Thermal protection

Caves in temperate regions such as Europe and North America maintain an average yearly temperature of 11–13 °C (52–58 °F). [4] While this is not especially cold, exposure to water and fatigue can increase the risk of hypothermia. Cavers usually wear a one-piece undersuit made of fleece or fibre pile, sometimes used in tandem with thermal underclothes. In warmer caves, such as those in France and Spain, lighter undersuits are used to prevent overheating.

A pair of Wellington boots Wellies.jpg
A pair of Wellington boots

When caving in wet caves neoprene wetsuits provide superior insulation to fleece underclothes. While cavers often use wetsuits designed for surfing or diving, specialist caving wetsuits are available with reinforced elbows and knees. [5] Hybrid fleece wetsuit-undersuits are also used.

Abrasive protection

Cavers commonly wear protective oversuits, similar to boiler suits but made of heavily abrasion-resistant material such as cordura. In wet or windy caves, PVC oversuits may be preferred, as they provide a greater degree of warmth and protection against getting wet. Oversuits often come with reinforced areas, especially at wear points such as the elbows, seat and shins. Internal pockets and hoods are sometimes provided.

Knee pads and, less commonly, elbow pads are worn both to protect both the caver's person and clothing. Gloves are also worn. In wet caves neoprene gloves can be worn as added protection against the cold.

Footwear

Wellington boots are a popular choice of footwear, being hard-wearing, cheap, having good grip and great water-resistance. Hiking boots are also worn, providing superior ankle support. They do however let water and grit in much easier and are often damaged by the harsh cave environment. There is also the risk of lace hooks ensnaring on ladders. In large, dry, tropical caves they are superior to Wellington boots, being cooler and restrict movement less. Specialist canyoning boots offer an expensive alternative to Wellingtons and hiking boots.

Helmets

While helmets are used to protect the caver's head against occasional falling rocks, they find much more use in protecting the cavers' heads from bumps and scrapes while moving through low or awkward passageways. Helmets are invaluable for mounting lights—an array of lights can be attached to a helmet. Many helmets used in caving can also be used as climbing helmets.

Vertical equipment

Many caves have shafts or drops that require ropes or ladders to pass. Wire ladders have largely been superseded by ropes for descending Pitch (vertical space) since the early '60s, though ladders still have useful applications on shorter pitches, where full abseiling gear would be inappropriate.

Single rope technique

The single-rope technique (SRT) is the most commonly used technique for passing vertical obstacles.

Standard equipment

  • Climbing harness - static and more abrasion-resistant than the harnesses used in rock climbing.
  • Climbing rope - rope used for abseiling is low-stretch static rope, typically 9 mm-thick in Europe. In the US, SRT rope is thicker (11mm) and more abrasion-resistant, given the greater amount of rope-rub tolerated. Ropes are cut into varying lengths
  • Ascender - used to ascend ropes. Devices that used lever cams were once used, though these have now been overtaken in popularity by toothed cam devices which slip less. A minimum of two ascenders are used, one attached to the harness at waist level, and another attached to a foot-loop and moved by hand. A third ascender may be attached to a foot and a rope-walking technique used.
  • Descender - used to abseil down the rope. There are two main types of descender – a bobbin descender such as the Petzl Stop, and a rack descender, favoured in parts of the US for its smooth descent and excellent heat-sinking capacities. Bobbin descenders are favoured for European style SRT as they make it easier to change ropes at rebelays and are lighter.
  • Cowstails - lanyards used to clip into safe points of contact when changing over at rebelays and while using traverse lines. They are made from a length of dynamic rope with two lanyards of differing length ending in carabiners.
  • Knife - used as safety equipment to cut ropes, cut hair caught in descenders etc.
  • Whistle - on long pitches where shouting is ineffective, whistles are used to signal other team members.
  • Chest roller - helps stabilize barrel-chested or top-heavy users who have a tendency to lean back during vertical caving. The device features a chest plate, which is strapped high on the torso, and a metal roller, which locks around the rope. [6]

Ladders

Early cavers used rope ladders with timber rungs. These were superseded by wire 'Elektron' ladders at the start of the 1960s and remained the most common method of descending large shafts until around the end of the 1980s. Today they are largely used for descending short or tight pitches. The rungs of the ladders are usually made of aluminium tube because it is light and strong. Ladders are usually made in 5 m (15 ft), 8 m (20 ft), or 10 m (30 ft) lengths, and can be clipped together to make longer lengths. While ladders can be used without a belay, this is unsafe and is not recommended. Ladders may be carried coiled, without other protection, until needed, or may be carried inside tough PVC tackle-bags.

Rope

Dynamic rope, more commonly used in climbing, is used in caving for belaying cavers on climbs or using ladders.

Static rope, once past its useful life for abseiling, is often used for fixed aids, such as handlines on climbs. The rope may be knotted to help climbers. Rope may also be recycled for digging.

Bolting

Most caves require artificial anchor points to secure abseiling rope. A common method of placing bolts is to hand drill them using a hammer and a self-drilling bolt, using bolts adapted from the construction industry. A hanger can then be screwed into the bolt. Since affordable battery drills came on the market it is more common to see cavers drill the holes and use a variety of different bolts and concrete screws. Stainless steel resin bolts are used on routes that see a lot of traffic as they have a long life and, if placed correctly, are safe and reliable.

Surveying equipment

Cave surveying is a specialist activity undertaken within caving to produce maps of caves. The type of equipment used depends on the intended accuracy of the survey. A basic survey may be carried out with an orienteering or diving compass and distances paced by foot or estimated. A more accurate survey would make use of a tape measure and specialist surveying compasses and inclinometers. Recently there has been a shift to wholly digital cave surveying.[ clarification needed ]

Measuring instruments

A standard Brunton Geo, a combined compass and inclinometer, popular as a cave surveying compass until recently Brunton.JPG
A standard Brunton Geo, a combined compass and inclinometer, popular as a cave surveying compass until recently

The most common device used by cave surveyors is a sighting compass, such as that manufactured by Suunto or Silva, that can be read to the half-degree. Compasses used for cave surveying have to be rugged to cope with the harsh conditions. For high grade surveys, inclinometers are required, and are sometimes made in combined units with compasses. Recently, digital compasses and inclinometers have been developed by enthusiasts, some with wireless connections to PDAs, though these have not yet attained widespread use.

Measuring distance

A standard fibreglass tape measure is commonly used to measure distance, usually in lengths of 30 to 50 metres (98 to 164 ft). Laser rangefinders have recently gained popularity, though tapes remain preferable in especially wet or muddy conditions.

Recording data

Tough waterproof paper is used to record data, the advantage being that, if the paper becomes excessively muddy, it can be washed off in a stream or pool. Paperless surveying is now becoming a reality as digital measuring devices can be wirelessly connected to PDAs where the data is stored and drawn.

Communication

Communication between cavers and people on the surface may be essential for rescues or expeditions. Communication may be as simple as coded whistle blasts, though they are only effective across short distances and cannot be used in underwater caves. [7] Telephones have been used in mines since at least June 1882, while the first record of telephones used in caving is from 1898. Édouard-Alfred Martel and his cousin Gabriel Gaupillat utilized lightweight telephones of 480 g (1.06 lb) with up to 400 m (1,300 ft) of wire to explore deep pitches. However, it is possible that telephones were used in Lamb Leer caverns before February 1885, as there are references to a "talking machine" in use before this time. [8]

Radio communication within caves is problematic because rock is a conductor and therefore absorbs radio waves. Ordinary radios have a very short range within caves. Low frequency (LF) or very low frequency (VLF) radios with single-sideband modulation are more commonly used today. Early models were called "speleophones". [9]

See also

Related Research Articles

<span class="mw-page-title-main">Caving</span> Recreational pastime of exploring cave systems

Caving, also known as spelunking and potholing, is the recreational pastime of exploring wild cave systems. In contrast, speleology is the scientific study of caves and the cave environment.

<span class="mw-page-title-main">Climbing</span> Activity to ascend a steep object

Climbing is the activity of using one's hands, feet, or other parts of the body to ascend a steep topographical object that can range from the world's tallest mountains to small boulders. Climbing is done for locomotion, sporting recreation, for competition, and is also done in trades that rely on ascension, such as rescue and military operations. Climbing is done indoors and outdoors, on natural surfaces, and on artificial surfaces

<span class="mw-page-title-main">Canyoning</span> Traveling in canyons using a variety of techniques

Canyoning is a unique sport that combines several outdoor sports like rock climbing, hiking, swimming, and rappelling. A canyoneer travels down canyons using a variety of techniques that may include other outdoor activities such as walking, scrambling, climbing, jumping, abseiling (rappelling), and swimming.

<span class="mw-page-title-main">Tree climbing</span> Ascending and moving around in the crown of trees

Tree climbing is a recreational or functional activity consisting of ascending and moving around in the crowns of trees.

<span class="mw-page-title-main">Diving suit</span> Garment or device designed to protect a diver from the underwater environment

A diving suit is a garment or device designed to protect a diver from the underwater environment. A diving suit may also incorporate a breathing gas supply, but in most cases the term applies only to the environmental protective covering worn by the diver. The breathing gas supply is usually referred to separately. There is no generic term for the combination of suit and breathing apparatus alone. It is generally referred to as diving equipment or dive gear along with any other equipment necessary for the dive.

<span class="mw-page-title-main">Glossary of climbing terms</span> For rock climbing and mountaineering

Glossary of climbing terms relates to rock climbing, mountaineering, and to ice climbing.

<span class="mw-page-title-main">Rock-climbing equipment</span> List of manmade gear

Rock-climbing equipment varies with the type of climbing undertaken. Bouldering needs the least equipment outside of shoes and chalk and optional crash pads. Sport climbing adds ropes, harnesses, belay devices, and quickdraws to clip into pre-drilled bolts. Traditional climbing adds the need for carrying a "rack" of temporary passive and active protection devices. Multi-pitch climbing adds devices to assist in ascending and descending fixed ropes. And finally aid climbing uses unique equipment.

<span class="mw-page-title-main">Abseiling</span> Rope-controlled descent

Abseiling, also known as rappelling, is the controlled descent of a steep slope, such as a rock face, by moving down a rope. When abseiling, the person descending controls their own movement down the rope, in contrast to lowering off, in which the rope attached to the person descending is paid out by their belayer.

<span class="mw-page-title-main">Belaying</span> Rock climbing safety technique using ropes

Belaying is a variety of techniques climbers use to create friction within a climbing system, particularly on a climbing rope, so that a falling climber does not fall very far. A climbing partner typically applies tension at the other end of the rope whenever the climber is not moving, and removes the tension from the rope whenever the climber needs more rope to continue climbing.

<span class="mw-page-title-main">Steeplejack</span> Construction worker specialising in the exteriors of tall buildings

A steeplejack is a craftsman who scales buildings, chimneys, and church steeples to carry out repairs or maintenance.

<span class="mw-page-title-main">Pitch (climbing)</span> Steep section of a climbing route requiring a rope

In climbing, a pitch is a section of a climbing route between two belay points, and is most commonly related to the task of lead climbing, but is also related to abseiling. Climbing on routes that require only one pitch is known as single-pitch climbing, and climbing on routes with more than one pitch is known as multi-pitch climbing.

<span class="mw-page-title-main">Rock climbing</span> Type of sport

Rock climbing is a sport in which participants climb up, across, or down natural rock formations or indoor climbing walls. The goal is to reach the summit of a formation or the endpoint of a usually pre-defined route without falling. Rock climbing is a physically and mentally demanding sport, one that often tests a climber's strength, endurance, agility and balance along with mental control. Knowledge of proper climbing techniques and the use of specialized climbing equipment is crucial for the safe completion of routes.

<span class="mw-page-title-main">Multi-pitch climbing</span> Type of climbing

Multi-pitch climbing is a type of climbing that typically takes place on routes that are more than a single rope length in height, and thus where the lead climber cannot complete the climb as a single pitch. Where the number of pitches exceeds 6–10, it can become big wall climbing, or where the pitches are in a mixed rock and ice mountain environment, it can become alpine climbing. Multi-pitch rock climbs can come in traditional, sport, and aid formats. Climbers have also free soloed multi-pitch routes.

<span class="mw-page-title-main">Ropes course</span>

A ropes course is a challenging outdoor personal development and team building activity which usually consists of high elements, low elements, or some combination of the two. Low elements take place on the ground or above the ground. High elements are usually constructed in trees or made of utility poles and require a belay for safety.

<span class="mw-page-title-main">Prusik knot</span> Type of knot

A Prusik is a friction hitch or knot used to attach a loop of cord around a rope, applied in climbing, canyoneering, mountaineering, caving, rope rescue, ziplining, and by arborists. The term Prusik is a name for both the loops of cord used to tie the hitch and the hitch itself, and the verb is "to prusik". More casually, the term is used for any friction hitch or device that can grab a rope. Due to the pronunciation, the word is often misspelled Prussik, Prussick, or Prussic.

<span class="mw-page-title-main">Single-rope technique</span>

Single-rope technique (SRT) is a set of methods used to descend and ascend on the same single rope. Single-rope technique is used in caving, potholing, rock climbing, canyoning, roped access for building maintenance and by arborists for tree climbing, although to avoid confusion in the tree climbing community, many have taken to calling it "stationary" rope technique.

<span class="mw-page-title-main">Rope solo climbing</span> Type of solo climbing with protection

Rope-solo climbing or rope-soloing is a form of solo climbing, but unlike with free solo climbing, which is also performed alone and with no climbing protection whatsoever, the rope-solo climber uses a mechanical self-belay device and rope system, which enables them to use the standard climbing protection to protect themselves in the event of a fall.

<span class="mw-page-title-main">Climbing rope</span> Rope used to secure climbers

A climbing rope is a rope that is used in climbing. It is a critical part of an extensive chain of protective equipment used by climbers to help prevent potentially fatal fall-related accidents.

<span class="mw-page-title-main">Pit cave</span> Cave with significant vertical passages

A pit cave, shaft cave or vertical cave—or often simply called a pit and pothole or pot ; jama in South Slavic languages scientific and colloquial vocabulary —is a type of cave which contains one or more significant vertical shafts rather than being predominantly a conventional horizontal cave passage. Pits typically form in limestone as a result of long-term erosion by water. They can be open to the surface or found deep within horizontal caves. Among cavers, a pit is a vertical drop of any depth that cannot be negotiated safely without the use of ropes or ladders.

<span class="mw-page-title-main">Rat Hole, Gaping Gill</span> Cave entrance in North Yorkshire, England

Rat Hole is one of the entrances to the Gaping Gill cave system, located in the north bank of Fell Beck 30 metres (33 yd) upstream of Gaping Gill Main Shaft. A small, awkward, tube-like passage descends into a stream passage, and hence to a 100-metre (330 ft) shaft into Gaping Gill Main Chamber. The sharp and loose nature of the rock, and the quantity of water prevented full exploration for over 80 years, but the current route is described in one guide book as "a technical and exhilarating adventure". It lies within the designated Ingleborough Site of Special Scientific Interest.

References

  1. "Evolution of Caving and Cave Diving Equipment". ActivityFan Blog. 2017-08-09. Retrieved 2019-11-06.
  2. "Full text of "The Irish naturalist"" . Retrieved 2015-04-23.
  3. Jochen Duckeck. "Famous People: Robert de Joly". Showcaves.com. Retrieved 2015-04-23.
  4. "Ground Water, Caves, and Temperature". Archived from the original on December 11, 2007. Retrieved July 2, 2011.
  5. "Caving Wetsuits - Clothing for Cavers". Warmbac.com. Retrieved 2015-04-23.
  6. "PMI Chest Roller" (PDF). pmirope.com. Archived (PDF) from the original on 2023-09-03. Retrieved 2023-09-03.
  7. Gibson, David (2010). Cave Radiolocation. Lulu.com. p. 73. ISBN   978-1445771052.
  8. Williams, R. G. J. (1995). "Lamb leer cavern 1880-90: the lake and the talking machine" (PDF). Proc. Univ. Bristol Speleol. Soc. 20 (2): 135–151.
  9. Beford, Mike (2012). "A Directory of Cave Radio Designs". CREG Journal Archive.