Meter Point Administration Number

A Meter Point Administration Number, also known as MPAN, Supply Number or S-Number, is a 21-digit reference used in Great Britain to uniquely identify electricity supply points such as individual domestic residences. The system was introduced in 1998 to aid creation of a competitive environment for the electricity companies, and allows consumers to switch their supplier easily as well as simplifying administration. Although the name suggests that an MPAN refers to a particular meter, an MPAN can have several meters associated with it, ^[1] or indeed none where it is an unmetered supply. A supply receiving power from the network operator (DNO) has an import MPAN, while generation and microgeneration projects feeding back into the DNO network are given export MPANs. ^[1]

The equivalent for gas supplies is the Meter Point Reference Number and the water/wastewater equivalent for non-household customers is the Supply Point ID.

Structure

An MPAN is commonly separated into two sections: the core and the top line data. The core is the final 13 digits and is the unique identifier. The top line data gives information about the characteristics of the supply and is the responsibility of the supplier.

The full MPAN is required to be depicted on electricity bills (the boxes on the top and bottom line are generally unaligned). ^[2]

The core data is on the second line, the supplementary data on the first. Only the last digit on the bottom row is the check digit.

Profile Class (PC)

The first two digits of a full MPAN reflect its profile class. ^[3]

00	Half-hourly supply (import and export)
01	Domestic unrestricted
02	Domestic Economy meter of two or more rates
03	Non-domestic unrestricted
04	Non-domestic Economy 7
05	Non-domestic, with maximum demand (MD) recording capability and with load factor (LF) less than or equal to 20%
06	Non-domestic, with MD recording capability and with LF less than or equal to 30% and greater than 20%
07	Non-domestic, with MD recording capability and with LF less than or equal to 40% and greater than 30%
08	Non-domestic, with MD recording capability and with LF greater than 40% (also all non-half-hourly export MSIDs)

Profile class 00 supplies are half-hourly (HH) metered, i.e. they record electricity consumption for every half hour of every day, and supplies of the other profile classes are non-half-hourly (NHH) metered. A NHH supply must be upgraded to HH where: ^[4]

Any Metering System where the average of the maximum monthly electrical demands in the three months of highest demand, either in:

a. the previous twelve months; or

b. the period since the most recent Significant Change of Demand (whichever is the shorter)

exceeds 100kW.

HH data is recorded by the meter and collected by an onsite download, or by remote communication methods such as GSM, SMS, GPRS or telephone line. ^[2]

Domestic NHH import MPANs always have a profile class of 01 or 02. Domestic NHH export MPANs are allocated a profile class of 08. ^[3]

Meter Time Switch Code (MTC)

The MTC is a 3 digit code that reflects the various registers a meter may have, such as a single rate, day/night split, or a seasonal time of day. ^{[5] [6]}

MTC Ranges

001–399	DNO specific
400–499	Reserved
500–509	Codes for related Metering Systems – common across the Industry
510–799	Codes for related Metering Systems – DNO specific
800–999	Codes common across the Industry

Line Loss Factor Class (LLFC)

The Line Loss Factor Class or LLFC ^[7] is an alphanumeric code used to identify the related Distribution Use of System (DUoS) charges for the MPAN. The figure reflects both the amount of distribution infrastructure used to supply the exit point and the amount of energy lost through heating of cables, transformers, etc. ^[2]

Core

The MPAN core is the final 13 digits of the MPAN, and uniquely identifies an exit point. It consists of a two-digit Distributor ID, followed by an eight-digit unique identifier, then by two digits and a single check digit.

Distributor ID

Map of DNO licence areas

Great Britain is divided into fourteen distribution areas. For each area a single company, the distribution network operator, has a licence to distribute electricity. ^[8] They effectively carry electricity from the National Grid to the exit points (each having a unique MPAN and a possibility of several meters) where the customers are. The owner of the distribution network charges electricity suppliers for carrying the electricity in their network. Their DNO licensed regions are the same geographic areas as the former nationalised electricity boards. ^[8]

DNOs

ID [8]	Name	Operator	Phone Number	Market Participant ID [9]	GSP Group ID [10]
10	Eastern England	UK Power Networks	0800 029 4285	EELC	_A
11	East Midlands	National Grid (formerly Western Power Distribution)	0800 096 3080	EMEB	_B
12	London	UK Power Networks	0800 029 4285	LOND	_C
13	Merseyside and Northern Wales	SP Energy Networks	0330 10 10 444	MANW	_D
14	West Midlands	National Grid (formerly Western Power Distribution)	0800 096 3080	MIDE	_E
15	North Eastern England	Northern Powergrid	0800 011 3332	NEEB	_F
16	North Western England	Electricity North West	0800 048 1820	NORW	_G
17	Northern Scotland	Scottish & Southern Electricity Networks	0800 048 3516	HYDE	_P
18	Southern Scotland	SP Energy Networks	0330 10 10 444	SPOW	_N
19	South Eastern England	UK Power Networks	0800 029 4285	SEEB	_J
20	Southern England	Scottish & Southern Electricity Networks	0800 048 3516	SOUT	_H
21	Southern Wales	National Grid (formerly Western Power Distribution)	0800 096 3080	SWAE	_K
22	South Western England	National Grid (formerly Western Power Distribution)	0800 096 3080	SWEB	_L
23	Yorkshire	Northern Powergrid	0800 011 3332	YELG	_M

In addition to the distribution network operators noted above who are licensed for a specific geographic area, there are also independent distribution network operators (IDNOs). These own and operate electricity distribution networks which are mostly network extensions connected to the existing distribution network, e.g. to serve new housing developments.

Scottish Hydro Electric Power Distribution also provide distribution services in South Scotland as an IDNO and Southern Electric Power Distribution provide IDNO services in all other England and Wales areas. Other IDNOs have no "base" area. ^[11]

Independent Distribution Network Operators

ID[ citation needed ]	Name	Licensee [12]	Market Participant Id [9]
24	GTC	Independent Power Networks Limited	IPNL
25	ESP Energy	ESP Energy	LENG
26	Energetics / Last Mile	Last Mile Electricity Limited	GUCL
27	GTC	The Electricity Network Company Ltd	ETCL
28	EDF IDNO	UK Power Networks (IDNO) Ltd	EDFI (no longer live)
29		Harlaxton Energy Networks Ltd	HARL
30		Peel Electricity Networks Ltd	PENL
31		UK Power Distributions Ltd	UKPD
32	Energy Assets Networks	Energy Assets Networks Ltd	UDNL
33	EPN	Eclipse Power Networks Ltd	GGEN
34		Murphy Power Distribution Limited	MPDL
35	Fulcrum Electricity Assets	Fulcrum Electricity Assets Ltd	FEAL
36	Vattenfall Networks	Vattenfall Network Limited	VATT
37	Forbury Assets Limited	Forbury Assets Limited	FORB
38	Indigo Power Limited	Indigo Power Limited	INDI
39	Squire Energy Metering Ltd	Squire Energy Metering Ltd	STRK
40	Utility Assets Limited	Utility Assets Limited	UTAL
42	Advanced Electricity Networks	Advanced Electricity Networks	AENL
43	IDCS Ltd	IDCS Ltd	IDCS

MPAN state

The supply identified by the MPAN can be in one of four states: disconnected, de-energised, live, and new.

• Disconnected: The service cable has been removed and the MPAN will not be reused.
• De-energised: The service cable is in place, but the fuse has been removed. The meter remains connected to the distribution network, but no electricity can be used.
• Live: Both the service cable and the fuse are in place. The supply is fully operational.
• New: A new MPAN has been generated, however, the top line (supplementary data consisting of the Profile Class and Meter Time-Switch Code) is not yet complete. The service cable may or may not be installed.

These terms are by no means standardised. For example, a disconnected supply might be referred to as a 'dead' supply.

Export MPANs

The vast majority of MPANs are import MPANs, where energy is being consumed. However, if a supply exports to the distribution network, then an export MPAN is issued. If a supply both imports and exports, then both an import MPAN and export MPAN are issued.

Microgeneration

Formerly, export MPANs required a half-hourly compliant meter to be installed. Since 2003, it has been possible for microgeneration projects, with a capacity of 30 kW or below, to have a non-half-hourly meter to measure export back into the distribution network. Uptake was slow, with the first microgeneration export MPAN being issued in June 2005. Some suppliers may not bother to register the export MPAN in MPAS as the revenue is so small.^{[ citation needed ]}

Following the closure of the feed-in tariffs, in January 2020 Ofgem introduced the Smart Export Guarantee (SEG) arrangements, where an export MPAN is allocated to allow a supplier to pay a customer for export of low-carbon energy. ^{[13] [14]}

Export capacity over 30 kW is required to be half-hourly metered. As part of the Marketwide Half Hourly Arrangements (MHHS), all export consumption will be required to be registered and settled on a half-hourly basis.^{[ citation needed ]}

Metered Supply Point

The Metered Supply Point (MSP) is the point at which the meter measuring a customer's consumption is located. It is thus also the point at which either the distribution network operator's supply, or the building network operator's lateral cable, terminates and the customer's equipment begins. In order to firmly establish a supply's MSP, the MPAN needs to be associated with a meter serial number.

Although it is common for an MPAN to be associated with one meter serial number, in some cases there is a many-to-many relationship. For example, one meter could be associated with both an import and an export MPAN, or one MPAN could be measured by three separate meters.

Metering Code of Practice

Code of Practice ^[15]

Code	Range	Configuration
COP10	less than 72 kW	One HH whole current meter installed. Introduced for February 2009. [16]
COP5	less than 1MW	One HH meter installed.
COP3	1MW to 10MW	Two meters installed, main and check, both recording the same load. The main meter being used for billing.
COP2	10MW to 100MW	Two meters installed as in COP3, but higher-accuracy class meters.
COP1	> 100MW	Very few sites in the UK at this level, generally power stations and connections with the National Grid.

Unmetered supplies

It is possible for small predictable supplies to be unmetered. ^[17] Examples are street lights, traffic signals, signs, bollards, telephone kiosks, CCTV and advertising displays.

For an item of equipment to be connected to the distribution network via an unmetered connection, its consumption should typically not exceed 500 watts and it should operate in a predictable manner, with no provision for it to be manually turned on/off at the end user's request. Generally the equipment would either be in operation and taking a supply of electricity 24 hours a day, or be controlled by a photocell, as is often the case for street lights.

It is the customer's responsibility to maintain an accurate and up-to-date inventory of unmetered supplies, and to inform the UMSO (UnMetered Supplies Operator) of all changes to the connected equipment within one month of the change.

Larger local authorities generally have unmetered supplies with a demand over 100kW and are required to trade their unmetered energy on a half-hourly basis. To do so, they employ a meter administrator ^{[18] [19]} who will use daily data from a photo-electric control unit (PECU) array which is then used to calculate the energy consumption. A PECU array is a device that holds a representative number of the photocells that authority uses on their street lights or traffic signals. ^[20] By trading energy as unmetered half-hourly the authority will accurately pay for the energy consumed by their declared unmetered equipment, and because the data is downloaded daily the authority will see their energy invoices change throughout the year to represent the changes in the seasonal daily lighting levels.

If, however, the unmetered supplies are being traded as non half-hourly the UMSO undertakes the responsibility to calculate an EAC (Estimated Annual Consumption). This is done using a simple formula which takes into account the circuit watts of the equipment and the annual hours of operation. For example, a piece of equipment that is in use 24 hours per day will have annual hours of 8766. For, say, a CCTV camera rated at 24 circuit watts the EAC would be 210.384kWh, calculated as circuit watts × annual hours divided by 1000. As a result of Ofgem's decision to progress with Marketwide Half Hourly Settlement (MHHS) all new unmetered supplies from April 2024 will be half hourly and existing non half-hourly unmetered supplies will move to half hourly trading during 2024.

If the equipment is street lighting the same process is used for non half-hourly; however, the annual hours will change as each photocell is assigned a set number of annual hours which indicate how and when the lights turn on and off. These annual hours have been set by Elexon and are not locally agreed with the UMSO by the customer.

Once an EAC calculation has taken place, an EAC Certificate is provided to the customer's appointed electricity supplier for billing, with an electronic copy of the EAC being sent to the appointed data collector. The DNO make a Distribution Use of System charge on the electricity supplier for the delivery of the electricity to the customer's unmetered equipment.

Standard Settlement Configuration (SSC)

Each non-half-hourly supply has a four digit code called the Standard Settlement Configuration (SSC), which specifies the number of registers a meter has, and the times that each register is recording electricity usage. The times that a register is recording is specified with a five digit code Time Pattern Regime (TPR). So for example a supply with SSC 0943 has two registers with TPRs 00404 and 00405. The 00404 TPR register records from 01:00 to 02:30 and 08:00 to 23:30, and the 00405 register records for the rest of the time. ^[21]

Meter Point Administration System

Each DNO operates a Meter Point Administration System (MPAS) which holds the following information for each MPAN:

• Supplier
• Data Collector (DC)
• Data Aggregator (DA)
• Meter Operator (MOP) or Meter Administrator for HH unmetered
• Customer
• Address of the exit point
• Associated MPANs
• MPAN state
• Profile Class (PC)
• Line Loss Factor Class (LLFC)
• Meter Time Switch Class (MTC)
• GSP Group

MPRS is the name of the software package that implements the MPAS system for all DNOs. ^[22] Since MPRS is used by most DNOs it is often used interchangeably with the term MPAS.

ECOES

ECOES (formally the Electricity Central Online Enquiry Service) is now the Electricity Enquiry Service (EES) is a website that allows users and authorised industry parties to search for supply details (past and present) using such things as the 13-digit MPAN bottom line number, the meter serial number or the postcode. The user can determine a wide range of data relating to the supply including the full address, meter details, the current energisation status and also the appointed parties (i.e. the supplier, distributor, MOP, DC and DA). The site is populated from information sent from the supplier regarding the metering system. ^[23]

Only non-domestic users (with two valid MPANs that are not Profile Class 1 or 2) can register to access this service. ^[24]

Check digit modulus

Check digit

The final digit in the MPAN is the check digit, and validates the previous 12 (the core) using a modulus 11 test. The check digit is calculated thus:

1. Multiply the first digit by 3
2. Multiply the second digit by the next prime number (5)
3. Repeat this for each digit (missing 11 out on the list of prime numbers for the purposes of this algorithm)
4. Add up all these products
5. The check digit is the sum modulo 11 modulo 10. ^[25]

MPAN verification examples
The algorithm in Java is: intcheckDigit(StringtoCheck){int[]primes={3,5,7,13,17,19,23,29,31,37,41,43};intsum=0;for(inti=0;i<primes.length;i++){sum+=Character.getNumericValue(toCheck.charAt(i))*primes[i];}returnsum%11%10;} In Matlab: functioncheck=checkdigits(MPANCore)% MPANCore is a cell array of 13 digit strings.% Check is a boolean vector the same size as MPANCore.% (100,000 MPANs in 0.05 seconds.)core=double(char(MPANCore)')-48;c=core(1:12,:);p=[357131719232931374143]'*ones(1,size(c,2));m=mod(mod(sum(p.*c),11),10);k=core(13,:);check=m==k; In Pascal / Delphi: functionCheckDigit(MPANCore:arrayofByte):Integer;constPrimes:array[0..11]ofByte=(3,5,7,13,17,19,23,29,31,37,41,43);vari:integer;beginResult:=0;fori:=0to11doResult:=Result+(MPANCore[i]*Primes[i]);Result:=Resultmod11mod10;end; In Ruby: # where mpan is a stringdefcheck_digit(mpan)primes=[3,5,7,13,17,19,23,29,31,37,41,43](0..11).inject(0){|sum,n|sum+(mpan[n,1].to_i*primes[n])}%11%10end In Visual Basic: PublicFunctionmpancheck(mpanAsString)AsBoolean' Michael Diarmid (EDF)' Updated 04/08/2010 MD' Returns True / False if MPAN is validOnErrorGoToinvalDimcAsVariant,sumAsInteger,iasBytec=Array(0,3,5,7,13,17,19,23,29,31,37,41,43)Fori=1To12sum=sum+(Mid(mpan,i,1)*c(i))NextiIfRight(mpan,1)=((sumMod11)Mod10)Thenmpancheck=TrueElseinval:mpancheck=FalseEndIfEndFunction In VisualBasic.Net 2010: PublicFunctionmpancheck(mpanAsString)AsBoolean' Michael Diarmid (EDF)' Updated 04/08/2010 MD' Returns True / False if MPAN is valid' Revised by Tym Huckin (16/03/2012) for VB 2010OnErrorGoToinvalDimcAsObject,sumAsIntegerc=NewList(OfInteger)From{0,3,5,7,13,17,19,23,29,31,37,41,43}Fori=1To12sum=sum+(Mid(mpan,i,1)*c(i))NextiIfsRight(mpan,1)=((sumMod11)Mod10)ThenReturnTrueElseinval:ReturnFalseEndIfEndFunctionPublicFunctionsRight(sSTRINGAsString,iLENAsInteger)AsStringDimsRETAsString=""TryIfiLEN>=Len(sSTRING)ThensRET=sSTRINGEndIfsRET=Mid(sSTRING,Len(sSTRING)-(iLEN-1),iLEN)CatchexAsExceptionsRET=""EndTryReturnsRETEndFunction Or VB.Net 2010, avoiding the use of VB6 Compatibility Library : ''' <summary>''' Validates an MPAN number''' </summary>''' <param name="mpan">At least the last 13 digits from the MPAN number, including the check digit, ''' expressed as a string</param>''' <returns>True for valid, otherwise false</returns>''' <remarks>Written by Martin Milan, May 2012, avoiding use of VB6 compatibility library, for .Net 4.0 Client Profile</remarks>PublicFunctionMPANIsValid(mpanAsString)AsBoolean' Set initial conditions.DimvalidationResultAsBoolean=FalseIfmpan.Length>12Then'Read the check digit into an Integer variable.DimintCheckDigitAsIntegerIfInteger.TryParse(mpan.Substring(mpan.Length-1),intCheckDigit)ThenDimstrTestAsString=mpan.Substring(mpan.Length-13,12)DimintPrimes()AsInteger={3,5,7,13,17,19,23,29,31,37,41,43}DimproductTotalAsInteger=0DimblnErrorAsBoolean=FalseForiAsInteger=0To11Step1DimintTestDigitAsIntegerIfInteger.TryParse(mpan.Substring(i,1),intTestDigit)ThenproductTotal+=(intTestDigit*intPrimes(i))ElseblnError=TrueExitForEndIfNextIfNotblnErrorThenvalidationResult=((productTotalMod11Mod10)=intCheckDigit)ElsevalidationResult=False' Due to a parsing error. EndIfEndIfEndIfReturnvalidationResultEndFunction In C#: /// <summary>/// Validates an MPAN number./// </summary>/// <param name="mpan">At least the last 13 digits from the MPAN number, including the check digit, /// expressed as a string.</param>/// <returns>True for valid, otherwise false.</returns>publicstaticboolMpanIsValid(stringmpan){// Set initial conditions.boolvalidationResult=false;if(mpan.Length>12){// Read the check digit into an Integer variable.intintCheckDigit=0;if(int.TryParse(mpan.Substring(mpan.Length-1),outintCheckDigit)){stringstrTest=mpan.Substring(mpan.Length-13,12);int[]intPrimes={3,5,7,13,17,19,23,29,31,37,41,43};intproductTotal=0;boolblnError=false;for(inti=0;i<=11;i++){intintTestDigit=0;if(int.TryParse(strTest.Substring(i,1),outintTestDigit)){productTotal+=(intTestDigit*intPrimes[i]);}else{blnError=true;break;}}if(!blnError){validationResult=((productTotal%11%10)==intCheckDigit);}else{validationResult=false;// Due to a parsing error. }}}returnvalidationResult;} As a formula in Excel 365: 'MPAN in Cell A1=IF(RIGHT(MOD(SUM(MID(A1,SEQUENCE(12),1)*{3;5;7;13;17;19;23;29;31;37;41;43}),11))=RIGHT(A1),"Correct","Invalid MPAN") In Python: defcheck_digit(mpan):"""Check MPAN digit. Args: mpan -- The first 12 digits of the MPAN number, excluding the check digit. """returnsum(prime*int(digit)forprime,digitin \ zip([3,5,7,13,17,19,23,29,31,37,41,43],mpan))%11%10 In PL/SQL: createorreplacefunctionmpan_check(mpaninvarchar2)returnbooleanis--CDP ATKINSONresinteger:=0;TYPEprime_tabISVARRAY(12)OFinteger;primesprime_tab:=prime_tab(3,5,7,13,17,19,23,29,31,37,41,43);beginforiin1..12loopres:=res+to_number(substr(mpan,i,1))*primes(i);endloop;returnto_char(mod(mod(res,11),10))=substr(mpan,13,1);endmpan_check; In JavaScript: functioncheckMPAN(mpan){varprimes=[3,5,7,13,17,19,23,29,31,37,41,43];varsum=0;varm=mpan.toString();if(m.length-1===primes.length){for(vari=0;i<primes.length;i++){sum+=parseInt(m.charAt(i))*primes[i];}returnsum%11%10===parseInt(m.charAt(12));}returnfalse;} In PHP: functioncheckMPAN($mpan){$primes=array(3,5,7,13,17,19,23,29,31,37,41,43);$sum=0;$mpan=str_split($mpan);if((count($mpan)-1)==count($primes)){for($i=0;$i<count($primes);$i++){$sum+=$mpan[$i]*$primes[$i];}return(($sum%11%10)==end($mpan))?true:false;}else{returnfalse;}} In SQL Server: CREATEFUNCTIONis_valid_mpan(@mpanVARCHAR(50))RETURNSINTASBEGIN--TimFoster(2013-01-04)DECLARE@is_mpanINT,@xINT=1,@sumINT=0DECLARE@arrTABLE(idINTIDENTITY(1,1),valINT)INSERTINTO@arr(val)VALUES(3),(5),(7),(13),(17),(19),(23),(29),(31),(37),(41),(43)WHILE@x<=12BEGINSELECT@sum=@sum+(SUBSTRING(@mpan,@x,1)*val)FROM@arrWHEREid=@xSELECT@x=@x+1ENDIFRIGHT(@mpan,1)=((@sum%11)%10)BEGINSELECT@is_mpan=1ENDELSEBEGINSELECT@is_mpan=0ENDRETURN@is_mpanEND In MySQL: CREATEDEFINER=`root`@`%`FUNCTION`is_valid_mpan`(mpanvarchar(13))RETURNSint(11)beginDECLAREis_mpanINT;DECLARExINT;DECLAREsumINT;declareretint;setx=1;setsum=0;CREATETEMPORARYTABLEIFNOTEXISTSarrSELECT1`id`,3`val`unionallSELECT2`id`,5`val`unionallSELECT3`id`,7`val`unionallSELECT4`id`,13`val`unionallSELECT5`id`,17`val`unionallSELECT6`id`,19`val`unionallSELECT7`id`,23`val`unionallSELECT8`id`,29`val`unionallSELECT9`id`,31`val`unionallSELECT10`id`,37`val`unionallSELECT11`id`,41`val`unionallSELECT12`id`,43`val`;WHILEx<=12DOSELECT(SUBSTRING(mpan,x,1)*val)intoretFROMarrWHEREid=x;setsum=sum+ret;setx=x+1;ENDwhile;IFRIGHT(mpan,1)=((sum%11)%10)thensetis_mpan=1;ELSEsetis_mpan=0;endif;dropTEMPORARYtablearr;RETURNis_mpan;end; In Swift 3 is: funcisValid(mpan:String)->Bool{letprimes=[3,5,7,13,17,19,23,29,31,37,41,43]letchars=Array(mpan.characters).map({Int(String($0))}).flatMap({$0})returnzip(primes,chars).reduce(0){$0+$1.0*$1.1}%11%10==chars.last!} In Apex (Salesforce): /** * @description Validates an MPAN. Written by Adam Dry June 2018. Apex version 43 * @param mpan the 13 digit MPAN including the check digit on the end */publicBooleanmpanIsValid(Stringmpan){List<Integer>primes=newList<Integer>{3,5,7,13,17,19,23,29,31,37,41,43};// Read the check digit into an Integer variableIntegercheckDigit=Integer.valueOf(mpan.right(1));StringstrTest=mpan.substring(0,12);IntegerproductTotal=0;for(Integeri=0;i<=11;i++){IntegertestDigit=Integer.valueOf(strTest.Substring(i,i+1));productTotal+=(testDigit*primes[i]);}IntegercomputedCheck=Math.mod(Math.mod(productTotal,11),10);BooleanvalidationResult=(computedCheck==checkDigit);returnvalidationResult;}

See also

• Energy accounting software
• Meter operator
• Mains electricity
• Distribution network operator
• Electrical power industry
• Electricity billing in the UK

External links

• Specific definitions of meter timeswitch codes can be found on the MRASCo documentation page.
• ECOES (Electricity Central Online Enquiry Service)
• Implementations of the MPAN check digit algorithm

References

1. Elexon. "Settlement of Microgeneration Export" (PDF). Archived from the original (PDF) on 9 October 2007.
2. Energy Linx (2007). "MPAN (Meter Point Administration Number)" . Retrieved 22 February 2007.
3. Elexon. "BSCP516 – Balancing and Settlement Code" (PDF). Archived from the original (PDF) on 19 March 2012. Retrieved 25 July 2011.
4. Elexon (25 June 2015). "Change of Measurement Class and Change of Profile Class" (PDF). Archived from the original (PDF) on 17 August 2016. Retrieved 5 July 2016.
5. MRASCo. "The Rough Guide To MTCs" (PDF). Archived from the original (PDF) on 13 January 2016. Retrieved 5 February 2011.
6. Elexon. "Meter Timeswitch Class table". Archived from the original on 26 April 2011. Retrieved 23 August 2011.
7. "Line Loss Factor Class(es)". Elexon Glossary. Retrieved 27 January 2013.
8. "MPAN (Meter Point Administration Number)". Energylinx. Retrieved 23 October 2023.
9. Elexon. "Market Participant Role" . Retrieved 20 December 2009.^{[ dead link ]}
10. Elexon. "GSP Group" . Retrieved 22 June 2010.^{[ dead link ]}
11. Ofgem. "Notice under section 11 of the Electricity Act 1989" (PDF). Archived from the original (PDF) on 30 December 2005. Retrieved 22 February 2007.
12. Ofgem. "List of all electricity licensees including suppliers" . Retrieved 21 September 2021.
13. "Smart Export Guarantee (SEG)". Ofgem. Retrieved 4 March 2022.
14. "Smart Export Guarantee (SEG) Terms and Conditions" (PDF). OVO Energy. 23 December 2019. Retrieved 4 March 2022.
15. See "ELEXON - Codes of Practice". Archived from the original on 13 August 2007. Retrieved 16 November 2008.
16. "Change Implementation".^{[ dead link ]}
17. "Unmetered Supplies". ELEXON. Retrieved 3 January 2019.
18. Power Data Associates Ltd. "Meter Administrator".
19. ICTIS (UK) Ltd. "Meter Administrator".
20. "Photo Electric Control Unit Arrays". Power Data Associates. Retrieved 4 March 2022.
21. Elexon (12 December 2011). "What are Standard Settlement Configurations?" . Retrieved 5 July 2016.
22. St. Clements Services Ltd. "Metering Point Registration System" . Retrieved 29 May 2008.
23. MRASCO. "Access to ECOES Data" . Retrieved 11 July 2009.
24. "Briefing_Note_on_Customer_Access_NDC_2" (PDF). ECOES. MRASCO. Retrieved 25 June 2015.
25. Energy Retail Association. "Data Item Definition v1 final" (PDF). p. 23. Archived from the original (PDF) on 25 September 2007. Retrieved 25 February 2014.