Molecular engineering

Last updated

Molecular engineering is an emerging field of study concerned with the design and testing of molecular properties, behavior and interactions in order to assemble better materials, systems, and processes for specific functions. This approach, in which observable properties of a macroscopic system are influenced by direct alteration of a molecular structure, falls into the broader category of “bottom-up” design.

Contents

Molecular engineering deals with material development efforts in emerging technologies that require rigorous rational molecular design approaches towards systems of high complexity. SizeVersusComplexity.png
Molecular engineering deals with material development efforts in emerging technologies that require rigorous rational molecular design approaches towards systems of high complexity.

Molecular engineering is highly interdisciplinary by nature, encompassing aspects of chemical engineering, materials science, bioengineering, electrical engineering, physics, mechanical engineering, and chemistry. There is also considerable overlap with nanotechnology, in that both are concerned with the behavior of materials on the scale of nanometers or smaller. Given the highly fundamental nature of molecular interactions, there are a plethora of potential application areas, limited perhaps only by one's imagination and the laws of physics. However, some of the early successes of molecular engineering have come in the fields of immunotherapy, synthetic biology, and printable electronics (see molecular engineering applications).

Molecular engineering is a dynamic and evolving field with complex target problems; breakthroughs require sophisticated and creative engineers who are conversant across disciplines. A rational engineering methodology that is based on molecular principles is in contrast to the widespread trial-and-error approaches common throughout engineering disciplines. Rather than relying on well-described but poorly-understood empirical correlations between the makeup of a system and its properties, a molecular design approach seeks to manipulate system properties directly using an understanding of their chemical and physical origins. This often gives rise to fundamentally new materials and systems, which are required to address outstanding needs in numerous fields, from energy to healthcare to electronics. Additionally, with the increased sophistication of technology, trial-and-error approaches are often costly and difficult, as it may be difficult to account for all relevant dependencies among variables in a complex system. Molecular engineering efforts may include computational tools, experimental methods, or a combination of both.

History

Molecular engineering was first mentioned in the research literature in 1956 by Arthur R. von Hippel, who defined it as "… a new mode of thinking about engineering problems. Instead of taking prefabricated materials and trying to devise engineering applications consistent with their macroscopic properties, one builds materials from their atoms and molecules for the purpose at hand." [1] This concept was echoed in Richard Feynman's seminal 1959 lecture There's Plenty of Room at the Bottom , which is widely regarded as giving birth to some of the fundamental ideas of the field of nanotechnology. In spite of the early introduction of these concepts, it was not until the mid-1980s with the publication of Engines of Creation: The Coming Era of Nanotechnology by Drexler that the modern concepts of nano and molecular-scale science began to grow in the public consciousness.

The discovery of electrically conductive properties in polyacetylene by Alan J. Heeger in 1977 [2] effectively opened the field of organic electronics, which has proved foundational for many molecular engineering efforts. Design and optimization of these materials has led to a number of innovations including organic light-emitting diodes and flexible solar cells.

Applications

Molecular design has been an important element of many disciplines in academia, including bioengineering, chemical engineering, electrical engineering, materials science, mechanical engineering and chemistry. However, one of the ongoing challenges is in bringing together the critical mass of manpower amongst disciplines to span the realm from design theory to materials production, and from device design to product development. Thus, while the concept of rational engineering of technology from the bottom-up is not new, it is still far from being widely translated into R&D efforts.

Molecular engineering is used in many industries. Some applications of technologies where molecular engineering plays a critical role:

Consumer Products

Energy Harvesting and Storage

Environmental Engineering

Immunotherapy

Synthetic Biology

Techniques and instruments used

Molecular engineers utilize sophisticated tools and instruments to make and analyze the interactions of molecules and the surfaces of materials at the molecular and nano-scale. The complexity of molecules being introduced at the surface is increasing, and the techniques used to analyze surface characteristics at the molecular level are ever-changing and improving. Meantime, advancements in high performance computing have greatly expanded the use of computer simulation in the study of molecular scale systems.

Computational and Theoretical Approaches

An EMSL scientist using the environmental transmission electron microscope at Pacific Northwest National Laboratory. The ETEM provides in situ capabilities that enable atomic-resolution imaging and spectroscopic studies of materials under dynamic operating conditions. In contrast to traditional operation of TEM under high vacuum, EMSL's ETEM uniquely allows imaging within high-temperature and gas environments. Environmental Transmission Electron Microscope.jpg
An EMSL scientist using the environmental transmission electron microscope at Pacific Northwest National Laboratory. The ETEM provides in situ capabilities that enable atomic-resolution imaging and spectroscopic studies of materials under dynamic operating conditions. In contrast to traditional operation of TEM under high vacuum, EMSL's ETEM uniquely allows imaging within high-temperature and gas environments.

Microscopy

Molecular Characterization

Spectroscopy

Surface Science

Synthetic Methods

Other Tools

Research / Education

At least three universities offer graduate degrees dedicated to molecular engineering: the University of Chicago, [18] the University of Washington, [19] and Kyoto University. [20] These programs are interdisciplinary institutes with faculty from several research areas.

The academic journal Molecular Systems Design & Engineering [21] publishes research from a wide variety of subject areas that demonstrates "a molecular design or optimisation strategy targeting specific systems functionality and performance."

See also

General topics

Related Research Articles

<span class="mw-page-title-main">Nanotechnology</span> Field of applied science addressing the control of matter on atomic and (supra)molecular scales

Nanotechnology, also shortened to nanotech, is the use of matter on an atomic, molecular, and supramolecular scale for industrial purposes. The earliest, widespread description of nanotechnology referred to the particular technological goal of precisely manipulating atoms and molecules for fabrication of macroscale products, also now referred to as molecular nanotechnology. A more generalized description of nanotechnology was subsequently established by the National Nanotechnology Initiative, which defined nanotechnology as the manipulation of matter with at least one dimension sized from 1 to 100 nanometers (nm). This definition reflects the fact that quantum mechanical effects are important at this quantum-realm scale, and so the definition shifted from a particular technological goal to a research category inclusive of all types of research and technologies that deal with the special properties of matter which occur below the given size threshold. It is therefore common to see the plural form "nanotechnologies" as well as "nanoscale technologies" to refer to the broad range of research and applications whose common trait is size.

Molecular electronics is the study and application of molecular building blocks for the fabrication of electronic components. It is an interdisciplinary area that spans physics, chemistry, and materials science. The unifying feature is use of molecular building blocks to fabricate electronic components. Due to the prospect of size reduction in electronics offered by molecular-level control of properties, molecular electronics has generated much excitement. It provides a potential means to extend Moore's Law beyond the foreseen limits of small-scale conventional silicon integrated circuits.

<span class="mw-page-title-main">Lithium-ion battery</span> Rechargeable battery type

A lithium-ion or Li-ion battery is a type of rechargeable battery which uses the reversible reduction of lithium ions to store energy. It is the predominant battery type used in portable consumer electronics and electric vehicles. It also sees significant use for grid-scale energy storage and military and aerospace applications. Compared to other rechargeable battery technologies, Li-ion batteries have high energy densities, low self-discharge, and no memory effect.

Supramolecular chemistry refers to the branch of chemistry concerning chemical systems composed of a discrete number of molecules. The strength of the forces responsible for spatial organization of the system range from weak intermolecular forces, electrostatic charge, or hydrogen bonding to strong covalent bonding, provided that the electronic coupling strength remains small relative to the energy parameters of the component. While traditional chemistry concentrates on the covalent bond, supramolecular chemistry examines the weaker and reversible non-covalent interactions between molecules. These forces include hydrogen bonding, metal coordination, hydrophobic forces, van der Waals forces, pi–pi interactions and electrostatic effects.

<span class="mw-page-title-main">Flow battery</span> Type of electrochemical cell

A flow battery, or redox flow battery, is a type of electrochemical cell where chemical energy is provided by two chemical components dissolved in liquids that are pumped through the system on separate sides of a membrane. Ion transfer inside the cell occurs through the membrane while both liquids circulate in their own respective space. Cell voltage is chemically determined by the Nernst equation and ranges, in practical applications, from 1.0 to 2.43 volts. The energy capacity is a function of the electrolyte volume and the power is a function of the surface area of the electrodes.

<span class="mw-page-title-main">Nanobatteries</span> Type of battery

Nanobatteries are fabricated batteries employing technology at the nanoscale, particles that measure less than 100 nanometers or 10−7 meters. These batteries may be nano in size or may use nanotechnology in a macro scale battery. Nanoscale batteries can be combined to function as a macrobattery such as within a nanopore battery.

As the world's energy demand continues to grow, the development of more efficient and sustainable technologies for generating and storing energy is becoming increasingly important. According to Dr. Wade Adams from Rice University, energy will be the most pressing problem facing humanity in the next 50 years and nanotechnology has potential to solve this issue. Nanotechnology, a relatively new field of science and engineering, has shown promise to have a significant impact on the energy industry. Nanotechnology is defined as any technology that contains particles with one dimension under 100 nanometers in length. For scale, a single virus particle is about 100 nanometers wide.

<span class="mw-page-title-main">Thalappil Pradeep</span> Indian scientist

Thalappil Pradeep is an institute professor and professor of chemistry in the Department of Chemistry at the Indian Institute of Technology Madras. He is also the Deepak Parekh Chair Professor. In 2020 he received the Padma Shri award for his distinguished work in the field of Science and Technology. He has received the Nikkei Asia Prize (2020), The World Academy of Sciences (TWAS) prize (2018), and the Shanti Swarup Bhatnagar Prize for Science and Technology in 2008 by Council of Scientific and Industrial Research.

Green nanotechnology refers to the use of nanotechnology to enhance the environmental sustainability of processes producing negative externalities. It also refers to the use of the products of nanotechnology to enhance sustainability. It includes making green nano-products and using nano-products in support of sustainability.

<span class="mw-page-title-main">Lithium–sulfur battery</span> Type of rechargeable battery

The lithium–sulfur battery is a type of rechargeable battery. It is notable for its high specific energy. The low atomic weight of lithium and moderate atomic weight of sulfur means that Li–S batteries are relatively light. They were used on the longest and highest-altitude unmanned solar-powered aeroplane flight by Zephyr 6 in August 2008.

An Ion gel is a composite material consisting of an ionic liquid immobilized by an inorganic or a polymer matrix. The material has the quality of maintaining high ionic conductivity while in the solid state. To create an ion gel, the solid matrix is mixed or synthesized in-situ with an ionic liquid. A common practice is to utilize a block copolymer which is polymerized in solution with an ionic liquid so that a self-assembled nanostructure is generated where the ions are selectively soluble. Ion gels can also be made using non-copolymer polymers such as cellulose, oxides such as silicon dioxide or refractory materials such as boron nitride.

Nanoarchitectures for lithium-ion batteries are attempts to employ nanotechnology to improve the design of lithium-ion batteries. Research in lithium-ion batteries focuses on improving energy density, power density, safety, durability and cost.

The lithium–air battery (Li–air) is a metal–air electrochemical cell or battery chemistry that uses oxidation of lithium at the anode and reduction of oxygen at the cathode to induce a current flow.

A potassium-ion battery or K-ion battery is a type of battery and analogue to lithium-ion batteries, using potassium ions for charge transfer instead of lithium ions. It was invented by the Iranian/American chemist Ali Eftekhari in 2004.

The applications of nanotechnology, commonly incorporate industrial, medicinal, and energy uses. These include more durable construction materials, therapeutic drug delivery, and higher density hydrogen fuel cells that are environmentally friendly. Being that nanoparticles and nanodevices are highly versatile through modification of their physiochemical properties, they have found uses in nanoscale electronics, cancer treatments, vaccines, hydrogen fuel cells, and nanographene batteries.

Research in lithium-ion batteries has produced many proposed refinements of lithium-ion batteries. Areas of research interest have focused on improving energy density, safety, rate capability, cycle durability, flexibility, and cost.

Lithium–silicon battery is a name used for a subclass of lithium-ion battery technology that employs a silicon-based anode and lithium ions as the charge carriers. Silicon based materials generally have a much larger specific capacity, for example 3600 mAh/g for pristine silicon, relative to graphite, which is limited to a maximum theoretical capacity of 372 mAh/g for the fully lithiated state LiC6. Silicon's large volume change (approximately 400% based on crystallographic densities) when lithium is inserted is one of the main obstacles along with high reactivity in the charged state to commercializing this type of anode. Commercial battery anodes may have small amounts of silicon, boosting their performance slightly. The amounts are closely held trade secrets, limited as of 2018 to at most 10% of the anode. Lithium-silicon batteries also include cell configurations where Si is in compounds that may at low voltage store lithium by a displacement reaction, including silicon oxycarbide, silicon monoxide or silicon nitride.

YangShao-Horn is a Chinese American scholar, Professor of Mechanical Engineering and Materials Science and Engineering and a member of Research Laboratory of Electronics at the Massachusetts Institute of Technology. She is known for research on understanding and controlling of processes for storing electrons in chemical bonds towards zero-carbon energy and chemicals.

Virus nanotechnology is the use of viruses as a source of nanoparticles for biomedical purposes. Viruses are made up of a genome and a capsid; and some viruses are enveloped. Most virus capsids measure between 20-500 nm in diameter. Because of their nanometer size dimensions, viruses have been considered as naturally occurring nanoparticles. Virus nanoparticles have been subject to the nanoscience and nanoengineering disciplines. Viruses can be regarded as prefabricated nanoparticles. Many different viruses have been studied for various applications in nanotechnology: for example, mammalian viruses are being developed as vectors for gene delivery, and bacteriophages and plant viruses have been used in drug delivery and imaging applications as well as in vaccines and immunotherapy intervention.

Larry A. Curtiss is an American chemist and researcher. He is a distinguished fellow and group leader of the Molecular Materials Group in the Materials Science Division at the U.S. Department of Energy’s (DOE) Argonne National Laboratory. In addition, Curtiss is a senior investigator in the Joint Center for Energy Storage Research (JCESR), a DOE Energy Storage Hub, and was the deputy director of the Center for Electrochemical Energy Science, a DOE Energy Frontier Research Center.

References

  1. ↑ von Hippel, Arthur R (1956). "Molecular Engineering". Science. 123 (3191): 315–317. Bibcode:1956Sci...123..315V. doi:10.1126/science.123.3191.315. JSTOR   1750067. PMID   17774519.
  2. ↑ Chiang, C. K. (1977-01-01). "Electrical Conductivity in Doped Polyacetylene". Physical Review Letters. 39 (17): 1098–1101. Bibcode:1977PhRvL..39.1098C. doi:10.1103/PhysRevLett.39.1098.
  3. ↑ Gallo, Jiri; Holinka, Martin; Moucha, Calin S. (2014-08-11). "Antibacterial Surface Treatment for Orthopaedic Implants". International Journal of Molecular Sciences. 15 (8): 13849–13880. doi: 10.3390/ijms150813849 . PMC   4159828 . PMID   25116685.
  4. ↑ Huang, Jinhua; Su, Liang; Kowalski, Jeffrey A.; Barton, John L.; Ferrandon, Magali; Burrell, Anthony K.; Brushett, Fikile R.; Zhang, Lu (2015-07-14). "A subtractive approach to molecular engineering of dimethoxybenzene-based redox materials for non-aqueous flow batteries". J. Mater. Chem. A. 3 (29): 14971–14976. doi:10.1039/c5ta02380g. ISSN   2050-7496.
  5. ↑ Wu, Mingyan; Xiao, Xingcheng; Vukmirovic, Nenad; Xun, Shidi; Das, Prodip K.; Song, Xiangyun; Olalde-Velasco, Paul; Wang, Dongdong; Weber, Adam Z. (2013-07-31). "Toward an Ideal Polymer Binder Design for High-Capacity Battery Anodes". Journal of the American Chemical Society. 135 (32): 12048–12056. doi:10.1021/ja4054465. PMID   23855781. S2CID   12715155.
  6. ↑ Choi, Jaecheol; Kim, Kyuman; Jeong, Jiseon; Cho, Kuk Young; Ryou, Myung-Hyun; Lee, Yong Min (2015-06-30). "Highly Adhesive and Soluble Copolyimide Binder: Improving the Long-Term Cycle Life of Silicon Anodes in Lithium-Ion Batteries". ACS Applied Materials & Interfaces. 7 (27): 14851–14858. doi:10.1021/acsami.5b03364. PMID   26075943.
  7. ↑ Tan, Shi; Ji, Ya J.; Zhang, Zhong R.; Yang, Yong (2014-07-21). "Recent Progress in Research on High-Voltage Electrolytes for Lithium-Ion Batteries". ChemPhysChem. 15 (10): 1956–1969. doi:10.1002/cphc.201402175. ISSN   1439-7641. PMID   25044525.
  8. ↑ Zhu, Ye; Li, Yan; Bettge, Martin; Abraham, Daniel P. (2012-01-01). "Positive Electrode Passivation by LiDFOB Electrolyte Additive in High-Capacity Lithium-Ion Cells". Journal of the Electrochemical Society. 159 (12): A2109–A2117. doi:10.1149/2.083212jes. ISSN   0013-4651.
  9. ↑ "New Laminar Batteries | Printed Electronics World". 2007-05-18. Retrieved 2016-08-06.
  10. ↑ Nokami, Toshiki; Matsuo, Takahiro; Inatomi, Yuu; Hojo, Nobuhiko; Tsukagoshi, Takafumi; Yoshizawa, Hiroshi; Shimizu, Akihiro; Kuramoto, Hiroki; Komae, Kazutomo (2012-11-20). "Polymer-Bound Pyrene-4,5,9,10-tetraone for Fast-Charge and -Discharge Lithium-Ion Batteries with High Capacity". Journal of the American Chemical Society. 134 (48): 19694–19700. doi:10.1021/ja306663g. PMID   23130634.
  11. ↑ Liang, Yanliang; Chen, Zhihua; Jing, Yan; Rong, Yaoguang; Facchetti, Antonio; Yao, Yan (2015-04-11). "Heavily n-Dopable π-Conjugated Redox Polymers with Ultrafast Energy Storage Capability". Journal of the American Chemical Society. 137 (15): 4956–4959. doi: 10.1021/jacs.5b02290 . PMID   25826124.
  12. ↑ Surwade, Sumedh P.; Smirnov, Sergei N.; Vlassiouk, Ivan V.; Unocic, Raymond R.; Veith, Gabriel M.; Dai, Sheng; Mahurin, Shannon M. (2015). "Water desalination using nanoporous single-layer graphene". Nature Nanotechnology. 10 (5): 459–464. Bibcode:2015NatNa..10..459S. doi:10.1038/nnano.2015.37. OSTI   1185491. PMID   25799521.
  13. ↑ He, Feng; Zhao, Dongye; Paul, Chris (2010-04-01). "Field assessment of carboxymethyl cellulose stabilized iron nanoparticles for in situ destruction of chlorinated solvents in source zones". Water Research. 44 (7): 2360–2370. doi:10.1016/j.watres.2009.12.041. PMID   20106501.
  14. ↑ Pelley, Janet. "Better Carbon Capture Through Chemistry | Chemical & Engineering News". cen.acs.org. Retrieved 2016-08-06.
  15. ↑ Black, Matthew; Trent, Amanda; Kostenko, Yulia; Lee, Joseph Saeyong; Olive, Colleen; Tirrell, Matthew (2012-07-24). "Self-Assembled Peptide Amphiphile Micelles Containing a Cytotoxic T-Cell Epitope Promote a Protective Immune Response In Vivo". Advanced Materials. 24 (28): 3845–3849. Bibcode:2012AdM....24.3845B. doi:10.1002/adma.201200209. ISSN   1521-4095. PMID   22550019. S2CID   205244562.
  16. ↑ Acar, Handan; Ting, Jeffrey M.; Srivastava, Samanvaya; LaBelle, James L.; Tirrell, Matthew V. (2017). "Molecular engineering solutions for therapeutic peptide delivery". Chemical Society Reviews. 46 (21): 6553–6569. doi:10.1039/C7CS00536A. ISSN   0306-0012. PMID   28902203.
  17. ↑ Lequieu, Joshua; Córdoba, Andrés; Hinckley, Daniel; de Pablo, Juan J. (2016-08-17). "Mechanical Response of DNA–Nanoparticle Crystals to Controlled Deformation". ACS Central Science. 2 (9): 614–620. doi:10.1021/acscentsci.6b00170. ISSN   2374-7943. PMC   5043426 . PMID   27725959.
  18. ↑ "Institute for Molecular Engineering". ime.uchicago.edu. Retrieved 2016-08-06.
  19. ↑ "Molecular Engineering & Sciences Institute". www.moles.washington.edu. Retrieved 2016-08-06.
  20. ↑ "Top page - Kyoto University, Department of Molecular Engineering". www.ml.t.kyoto-u.ac.jp. Retrieved 2016-08-06.
  21. ↑ "Molecular Systems Design & Engineering". Royal Society of Chemistry. July 31, 2014. Retrieved August 6, 2016.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.