Automotive engineering, along with aerospace engineering and naval architecture, is a branch of vehicle engineering, incorporating elements of mechanical, electrical, electronic, software, and safety engineering as applied to the design, manufacture and operation of motorcycles, automobiles, and trucks and their respective engineering subsystems. It also includes modification of vehicles. Manufacturing domain deals with the creation and assembling the whole parts of automobiles is also included in it. The automotive engineering field is research intensive and involves direct application of mathematical models and formulas. The study of automotive engineering is to design, develop, fabricate, and test vehicles or vehicle components from the concept stage to production stage. Production, development, and manufacturing are the three major functions in this field.
Automobile engineering is a branch study of engineering[citation needed] which teaches manufacturing, designing, mechanical mechanisms as well as operations of automobiles. It is an introduction[citation needed] to vehicle engineering which deals with motorcycles, cars, buses, trucks, etc. It includes branch study of mechanical, electronic, software and safety elements. Some of the engineering attributes and disciplines that are of importance to the automotive engineer include:
Safety engineering: Safety engineering is the assessment of various crash scenarios and their impact on the vehicle occupants. These are tested against very stringent governmental regulations. Some of these requirements include: seat belt and air bag functionality testing, front and side-impact testing, and tests of rollover resistance. Assessments are done with various methods and tools, including computercrash simulation (typically finite element analysis), crash-test dummy, and partial system sled and full vehicle crashes.
Visualization of how a car deforms in an Asymmetrical crash using finite element analysis.
Fuel economy/emissions: Fuel economy is the measured fuel efficiency of the vehicle in miles per gallon or kilometers per liter. Emissions-testing covers the measurement of vehicle emissions, including hydrocarbons, nitrogen oxides (NOx), carbon monoxide (CO), carbon dioxide (CO2), and evaporative emissions.
NVH engineering (noise, vibration, and harshness): NVH involves customer feedback (both tactile [felt] and audible [heard]) concerning a vehicle. While sound can be interpreted as a rattle, squeal, or hot, a tactile response can be seat vibration or a buzz in the steering wheel. This feedback is generated by components either rubbing, vibrating, or rotating. NVH response can be classified in various ways: powertrain NVH, road noise, wind noise, component noise, and squeak and rattle. Note, there are both good and bad NVH qualities. The NVH engineer works to either eliminate bad NVH or change the "bad NVH" to good (i.e., exhaust tones).
Vehicle electronics: Automotive electronics is an increasingly important aspect of automotive engineering. Modern vehicles employ dozens of electronic systems.[1] These systems are responsible for operational controls such as the throttle, brake and steering controls; as well as many comfort-and-convenience systems such as the HVAC, infotainment, and lighting systems. It would not be possible for automobiles to meet modern safety and fuel-economy requirements without electronic controls. Performance: Performance is a measurable and testable value of a vehicle's ability to perform in various conditions. Performance can be considered in a wide variety of tasks, but it generally considers how quickly a car can accelerate (e.g. standing start 1/4 mile elapsed time, 0–60mph, etc.), its top speed, how short and quickly a car can come to a complete stop from a set speed (e.g. 70-0mph), how much g-force a car can generate without losing grip, recorded lap-times, cornering speed, brake fade, etc. Performance can also reflect the amount of control in inclement weather (snow, ice, rain).
Shift quality: Shift quality is the driver's perception of the vehicle to an automatic transmission shift event. This is influenced by the powertrain (Internal combustion engine, transmission), and the vehicle (driveline, suspension, engine and powertrain mounts, etc.) Shift feel is both a tactile (felt) and audible (heard) response of the vehicle. Shift quality is experienced as various events: transmission shifts are felt as an upshift at acceleration (1–2), or a downshift maneuver in passing (4–2). Shift engagements of the vehicle are also evaluated, as in Park to Reverse, etc.
Durability / corrosion engineering: Durability and corrosion engineering is the evaluation testing of a vehicle for its useful life. Tests include mileage accumulation, severe driving conditions, and corrosive salt baths.
Drivability: Drivability is the vehicle's response to general driving conditions. Cold starts and stalls, RPM dips, idle response, launch hesitations and stumbles, and performance levels all contribute to the overall drivability of any given vehicle.
Cost: The cost of a vehicle program is typically split into the effect on the variable cost of the vehicle, and the up-front tooling and fixed costs associated with developing the vehicle. There are also costs associated with warranty reductions and marketing.
Program timing: To some extent programs are timed with respect to the market, and also to the production-schedules of assembly plants. Any new part in the design must support the development and manufacturing schedule of the model.
Assembly feasibility: It is easy to design a module that is hard to assemble, either resulting in damaged units or poor tolerances. The skilled product-development engineer works with the assembly/manufacturing engineers so that the resulting design is easy and cheap to make and assemble, as well as delivering appropriate functionality and appearance.
Quality management: Quality control is an important factor within the production process, as high quality is needed to meet customer requirements and to avoid expensive recall campaigns. The complexity of components involved in the production process requires a combination of different tools and techniques for quality control. Therefore, the International Automotive Task Force (IATF), a group of the world's leading manufacturers and trade organizations, developed the standard ISO/TS 16949. This standard defines the design, development, production, and (when relevant) installation and service requirements. Furthermore, it combines the principles of ISO 9001 with aspects of various regional and national automotive standards such as AVSQ (Italy), EAQF (France), VDA6 (Germany) and QS-9000 (USA). In order to further minimize risks related to product failures and liability claims for automotive electric and electronic systems, the quality discipline functional safety according to ISO/IEC 17025 is applied.
A development engineer has the responsibility for coordinating delivery of the engineering attributes of a complete automobile (bus, car, truck, van, SUV, motorcycle etc.) as dictated by the automobile manufacturer, governmentalregulations, and the customer who buys the product.
Much like the Systems engineer, the development engineer is concerned with the interactions of all systems in the complete automobile. While there are multiple components and systems in an automobile that have to function as designed, they must also work in harmony with the complete automobile. As an example, the brake system's main function is to provide braking functionality to the automobile. Along with this, it must also provide an acceptable level of: pedal feel (spongy, stiff), brake system "noise" (squeal, shudder, etc.), and interaction with the ABS (anti-lock braking system)
Another aspect of the development engineer's job is a trade-off process required to deliver all of the automobile attributes at a certain acceptable level. An example of this is the trade-off between engine performance and fuel economy. While some customers are looking for maximum power from their engine, the automobile is still required to deliver an acceptable level of fuel economy. From the engine's perspective, these are opposing requirements. Engine performance is looking for maximum displacement (bigger, more power), while fuel economy is looking for a smaller displacement engine (ex: 1.4 L vs. 5.4 L). The engine size however, is not the only contributing factor to fuel economy and automobile performance. Different values come into play.
The development engineer is also responsible for organizing automobile level testing, validation, and certification. Components and systems are designed and tested individually by the Product Engineer. The final evaluation is to be conducted at the automobile level to evaluate system to system interactions. As an example, the audio system (radio) needs to be evaluated at the automobile level. Interaction with other electronic components can cause interference. Heat dissipation of the system and ergonomic placement of the controls need to be evaluated. Sound quality in all seating positions needs to be provided at acceptable levels.
Manufacturing engineer
Manufacturing engineers are responsible for ensuring proper production of the automotive components or complete vehicles. While the development engineers are responsible for the function of the vehicle, manufacturing engineers are responsible for the safe and effective production of the vehicle. This group of engineers consist of process engineers, logistic coordinators, tooling engineers, robotics engineers, and assembly planners.[2]
In the automotive industry manufacturers are playing a larger role in the development stages of automotive components to ensure that the products are easy to manufacture. Design for manufacturability in the automotive world is crucial to make certain whichever design is developed in the Research and Development Stage of automotive design. Once the design is established, the manufacturing engineers take over. They design the machinery and tooling necessary to build the automotive components or vehicle and establish the methods of how to mass-produce the product. It is the manufacturing engineers job to increase the efficiency of the automotive plant and to implement lean manufacturing techniques such as Six Sigma and Kaizen.
Other automotive engineering roles
Other automotive engineers include those listed below:
Aerodynamics engineers will often give guidance to the styling studio so that the shapes they design are aerodynamic, as well as attractive.
Body engineers will also let the studio know if it is feasible to make the panels for their designs.
Change control engineers make sure that all of the design and manufacturing changes that occur are organized, managed and implemented...
NVH engineers perform sound and vibration testing to prevent loud cabin noises, detectable vibrations, and/or improve the sound quality while the vehicle is on the road.
The modern automotive product engineering process
Studies indicate that a substantial part of the modern vehicle's value comes from intelligent systems, and that these represent most of the current automotive innovation.[3][4] To facilitate this, the modern automotive engineering process has to handle an increased use of mechatronics. Configuration and performance optimization, system integration, control, component, subsystem and system-level validation of the intelligent systems must become an intrinsic part of the standard vehicle engineering process, just as this is the case for the structural, vibro-acoustic and kinematic design. This requires a vehicle development process that is typically highly simulation-driven.[5]
The V-approach
One way to effectively deal with the inherent multi-physics and the control systems development that is involved when including intelligent systems, is to adopt the V-Model approach to systems development, as has been widely used in the automotive industry for twenty years or more. In this V-approach, system-level requirements are propagated down the V via subsystems to component design, and the system performance is validated at increasing integration levels. Engineering of mechatronic systems requires the application of two interconnected "V-cycles": one focusing on the multi-physics system engineering (like the mechanical and electrical components of an electrically powered steering system, including sensors and actuators); and the other focuses on the controls engineering, the control logic, the software and realization of the control hardware and embedded software.[6][7]
Related Research Articles
Mechanical engineering is the study of physical machines that may involve force and movement. It is an engineering branch that combines engineering physics and mathematics principles with materials science, to design, analyze, manufacture, and maintain mechanical systems. It is one of the oldest and broadest of the engineering branches.
Mechatronics engineering, also called mechatronics, is an interdisciplinary branch of engineering that focuses on the integration of mechanical engineering, electrical engineering, electronic engineering and software engineering, and also includes a combination of robotics, computer science, telecommunications, systems, control, automation and product engineering.
A car platform is a shared set of common design, engineering, and production efforts, as well as major components, over a number of outwardly distinct models and even types of cars, often from different, but somewhat related, marques. It is practiced in the automotive industry to reduce the costs associated with the development of products by basing those products on a smaller number of platforms. This further allows companies to create distinct models from a design perspective on similar underpinnings. A car platform is not to be confused with a platform chassis, although such a chassis can be part of an automobile's design platform, as noted below.
The Chevrolet Vega is a subcompact automobile that was manufactured and marketed by GM's Chevrolet division from 1970 to 1977. Available in two-door hatchback, notchback, wagon, and sedan delivery body styles, all models were powered by an inline four-cylinder engine designed specifically for the Vega, with a lightweight, aluminum alloy cylinder block. The Vega first went on sale in Chevrolet dealerships on September 10, 1970. Variants included the Cosworth Vega, a short-lived limited-production performance model, introduced in the spring of 1975.
A vehicle bus is a specialized internal communications network that interconnects components inside a vehicle. In electronics, a bus is simply a device that connects multiple electrical or electronic devices together. Special requirements for vehicle control such as assurance of message delivery, of non-conflicting messages, of minimum time of delivery, of low cost, and of EMF noise resilience, as well as redundant routing and other characteristics mandate the use of less common networking protocols. Protocols include Controller Area Network (CAN), Local Interconnect Network (LIN) and others. Conventional computer networking technologies are rarely used, except in aircraft, where implementations of the ARINC 664 such as the Avionics Full-Duplex Switched Ethernet are used. Aircraft that use Avionics Full-Duplex Switched Ethernet (AFDX) include the Boeing 787, the Airbus A400M and the Airbus A380. Trains commonly use Ethernet Consist Network (ECN). All cars sold in the United States since 1996 are required to have an On-Board Diagnostics connector, for access to the car's electronic controllers.
Bendix Corporation is an American manufacturing and engineering company which, during various times in its existence, made automotive brake shoes and systems, vacuum tubes, aircraft brakes, aeronautical hydraulics and electric power systems, avionics, aircraft and automobile fuel control systems, radios, televisions and computers.
Chip tuning is changing or modifying an erasable programmable read only memory chip in an automobile's or other vehicles electronic control unit to achieve superior performance, whether it be more power, cleaner emissions, or better fuel efficiency. Engine manufacturers generally use a conservative electronic control unit map to allow for individual engine variations, as well as infrequent servicing and poor-quality fuel. Vehicles with a remapped electronic control unit may be more sensitive to fuel quality and service schedules.
Production Part Approval Process (PPAP) is used in the Aerospace or automotive supply chain for establishing confidence in suppliers and their production processes. Actual measurements are taken from the parts produced and are used to complete the various test sheets of PPAP.
"All customer engineering design record and specification requirements are properly understood by the supplier and that the process has the potential to produce product consistently meeting these requirements during an actual production run at the quoted production rate." Version 4, 1 March 2006
Hardware-in-the-loop (HIL) simulation, also known by various acronyms such as HiL, HITL, and HWIL, is a technique that is used in the development and testing of complex real-time embedded systems. HIL simulation provides an effective testing platform by adding the complexity of the process-actuator system, known as a plant, to the test platform. The complexity of the plant under control is included in testing and development by adding a mathematical representation of all related dynamic systems. These mathematical representations are referred to as the "plant simulation". The embedded system to be tested interacts with this plant simulation.
Noise, vibration, and harshness (NVH), also known as noise and vibration (N&V), is the study and modification of the noise and vibration characteristics of vehicles, particularly cars and trucks. While noise and vibration can be readily measured, harshness is a subjective quality, and is measured either via jury evaluations, or with analytical tools that can provide results reflecting human subjective impressions. The latter tools belong to the field psychoacoustics.
Manufacturing engineering or production engineering is a branch of professional engineering that shares many common concepts and ideas with other fields of engineering such as mechanical, chemical, electrical, and industrial engineering. Manufacturing engineering requires the ability to plan the practices of manufacturing; to research and to develop tools, processes, machines, and equipment; and to integrate the facilities and systems for producing quality products with the optimum expenditure of capital.
Automotive electronics are electronic systems used in vehicles, including engine management, ignition, radio, carputers, telematics, in-car entertainment systems, and others. Ignition, engine and transmission electronics are also found in trucks, motorcycles, off-road vehicles, and other internal combustion powered machinery such as forklifts, tractors and excavators. Related elements for control of relevant electrical systems are also found on hybrid vehicles and electric cars.
MAHLE Powertrain Ltd is the engineering services division of MAHLE GmbH. With its headquarters in Northampton, UK and sister company in Plymouth, Michigan, United States, the company specialises in the design, development and testing of electrified powertrain systems and provides a broad spectrum of engineering services to its global customer base. MAHLE Powertrain's engineers and technical specialists are also present in the MAHLE research and development centres in Munich, Germany and Shanghai, China.
The Automotive Research Association of India (ARAI) is a co-operative industrial research association by the automotive industry with the Ministry of Heavy Industries and the Government Of India. The objectives of the Association are Research and Development in automotive engineering for industry, product design and development, evaluation of automotive equipment and ancillaries, standardization, technical information services, execution of advanced courses on the application of modern technology and conduct of specific tests.
Runner Automobiles PLC (RAPLC) is a motorcycle and three-wheeler manufacturer based in Bangladesh. The company produces a range of motorcycles varying in size from 80 to 150 CC, and has become a major player in the sub 100 CC motorcycle segment in the country. In addition to motorcycles, Runner also produces three-wheeler auto-rickshaws in its Blaluka factory. The increase in disposable income among the general population and a rapidly growing middle class has contributed to the rise in demand for two-wheelers in Bangladesh. Runner offers 12 different models of motorcycles and scooters, with capacities ranging from 80 CC to 150 CC.
The Acura RLX is a mid-size flagship luxury car manufactured by Honda and sold under their Acura division, released in 2013, succeeding the RL. The RLX was discontinued in 2020.
Ecomechatronics is an engineering approach to developing and applying mechatronical technology in order to reduce the ecological impact and total cost of ownership of machines. It builds upon the integrative approach of mechatronics, but not with the aim of only improving the functionality of a machine. Mechatronics is the multidisciplinary field of science and engineering that merges mechanics, electronics, control theory, and computer science to improve and optimize product design and manufacturing. In ecomechatronics, additionally, functionality should go hand in hand with an efficient use and limited impact on resources. Machine improvements are targeted in 3 key areas: energy efficiency, performance and user comfort.
Industrial and production engineering (IPE) is an interdisciplinary engineering discipline that includes manufacturing technology, engineering sciences, management science, and optimization of complex processes, systems, or organizations. It is concerned with the understanding and application of engineering procedures in manufacturing processes and production methods. Industrial engineering dates back all the way to the industrial revolution, initiated in 1700s by Sir Adam Smith, Henry Ford, Eli Whitney, Frank Gilbreth and Lilian Gilbreth, Henry Gantt, F.W. Taylor, etc. After the 1970s, industrial and production engineering developed worldwide and started to widely use automation and robotics. Industrial and production engineering includes three areas: Mechanical engineering, industrial engineering, and management science.
Active sound design is an acoustic technology concept used in automotive vehicles to alter or enhance the sound inside and outside of the vehicle. Active sound design (ASD) often uses active noise control and acoustic enhancement techniques to achieve a synthesized vehicle sound.
Predictive engineering analytics (PEA) is a development approach for the manufacturing industry that helps with the design of complex products. It concerns the introduction of new software tools, the integration between those, and a refinement of simulation and testing processes to improve collaboration between analysis teams that handle different applications. This is combined with intelligent reporting and data analytics. The objective is to let simulation drive the design, to predict product behavior rather than to react on issues which may arise, and to install a process that lets design continue after product delivery.
↑ Valsan, A (October 24, 2006). "Trends, technology roadmaps and strategic market analysis of vehicle safety systems in europe". International Automotive Electronics Congress.
↑ Cabrera, A.; Foeken, M.J.; Tekin, O.A.; Woestenenk, K.; Erden, M.S.; De Schutter, B.; Van Tooren, M.J.L.; Babuska, R.; van Houten, F.J.; Tomiyama, T. (2010). "Towards automation of control software: a review of challenges in mechatronic design". Mechatronics. 20 (8): 876–886. doi:10.1016/j.mechatronics.2010.05.003.
↑ Cabrera, A.; Woestenenk, K. (2011). "An architectural model to support cooperative design for mechatronic products: a control design case". Mechatronics. 21 (3): 534–547. doi:10.1016/j.mechatronics.2011.01.009.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
