![]() Steamer No Wonder at Ostrander, Washington. | |
History | |
---|---|
Route: | Willamette. Columbia, and Cowlitz rivers |
In service: | 1889 |
Out of service: | 1930 |
Identification: | U.S. # 130458 |
Fate: | Abandoned |
General characteristics | |
Class and type: | riverine all-purpose |
Tonnage: | 269.66 gross tons; 235.30 registered tons |
Length: | 135.3 ft (41.2 m) over hull (exclusive of fantail) |
Beam: | 27.8 ft (8.5 m) over hull (exclusive of guards |
Depth: | 5.6 ft 6 in (1.86 m) |
Installed power: | twin steam engines, horizontally mounted, each with bore of 16 in (406.4 mm) and stroke of 84 ft (25.60 m), 17 nominal horsepower |
Propulsion: | stern-wheel |
Crew: | Thirteen (13). |
No Wonder was a stern-wheel driven steamboat that operated on the Willamette, Columbia and Cowlitz rivers from 1889 to 1930. No Wonder was originally built in 1877 as Wonder, which was dismantled in 1888, with components being shifted over to a new hull, which when launched in late 1889 was called No Wonder.
No Wonder served almost entirely in the logging and towing trade until it was abandoned in 1930. No Wonder was sometimes referred to as the Wonder during its operational career. [1]
No Wonder was built in East Portland, Oregon, in 1889, just above the landing of the Jefferson Street ferry. [2] [3] The original owner was the Willamette Steam Mills & Lumbering Company. [4] Construction was supervised by Capt. Frank B. Turner (b.1859). [4] David Stephenson (b.1835), a native of Saint John, New Brunswick, was the actual builder. [5]
No Wonder was built as a replacement boat by Captain Turner for the steamer Wonder. [3] Wonder had been built in 1877 by George Washington Weidler (commonly known as “Old Man Weidler”) as the first log-towing steamer on the Willamette River. [6] [7]
Components of Wonder were salvaged and installed on the new hull, which was named No Wonder. [3] [8] The new steamer was fitted with special equipment for handling log tows. [4]
The joke circulating about the old Wonder was that it had received that have because everyone was wondering where Captain Turner had obtained the money to build the boat. [3] [7] [9] The name No Wonder was chosen apparently as a response. [3] [7]
No Wonder was driven by a stern-wheel, which was turned by twin steam engines, horizontally mounted, each with bore of 16 in (406.4 mm) and stroke of 84 ft (25.60 m), generating 17 nominal horsepower. [10]
No Wonder was equipped with steam steering gear, an invention which Captain Turner had patented in 1888. [11] No Wonder was reported to be the best equipped logging towboat on the Columbia River. [12] The boiler, as of 1910, was reported to carry 100 pounds of steam pressure. [13] As built, No Wonder had a wood-fired boiler. [7]
No Wonder required a crew of 13 to run the boat. [14]
No Wonder was 135.3 ft (41.2 m) over hull (exclusive of fantail), with a beam of 27.8 ft (8.5 m) over hull (exclusive of guards and depth of hold of 5.6 ft 6 in (1.86 m). [2] The overall size of the vessel was 269.66 gross tons and 235.30 registered tons. [2] The official merchant vessel registry number was 130458. [2]
In April 1890, one J. Ordway was reported to be the principal owner of No Wonder. [15] Capt Frank Turner remained in charge of No Wonder until 1893, with W.H. Marshall (b.1853) as chief engineer. [4] After 1893, and up to at least 1895, Capt. Charles Spinner (b.1849) was in command. [4]
In February 1890, a flood washed away 4,000,000 board feet of logs belong to the Willamette Steam Mills. [1] About 3,000,000 board feet of these logs were recovered. [1] In two days in late February, No Wonder, under Captain Turner, working as far downriver as Clifton, recovered 1,900 logs, paying one dollar apiece for them. [1]
On June 29, 1890, No Wonder, under Capt. James Whitcomb, master, departed up the Columbia River with a tow of logs from the Lewis and Clark River, comprising over one-half million board feet of lumber. [16]
On February 20, 1890, the mate of No Wonder, Kane Olney, was seriously injured in a towing accident. [17] The accident occurred on the Columbia River, about a mile upriver from Cathlamet, Washington. [17] Captain Turner was in command at that time. [17] The steamer was using its donkey steam engine to haul logs out of the water onto the bank. [17] The mate was out of boat on the bank when one of the irons used to secure the pulling chain to the logs snapped loose from the log, striking the mate in the left temple, breaking his skull and exposing his brain. [17]
Olney was taken on board No Wonder, and the steamer proceeded downstream as fast as possible, reaching Astoria two hours later, where the mate was taken to the hospital. [17] As of midnight, he was still alive, but it was reported that “two spoonfuls of the brain matter exuded” from his skull. [17] Olney survived however, and lived to command other river steamers before his death in September 1936. [18]
On April 24, 1890, F.B. Jones, owner of the sternwheeler Maria, filed an affidavit with the U.S. Steamboat Inspector’s office, alleging that the day before, No Wonder, while towing logs on the Columbia River, had crowded the Maria, also towing logs, into a dangerous position from which it took three hours time to extricate the steamer. [15]
In October 1897, No Wonder was sold to the Shaver Transportation Company. [12] No Wonder had been lying idle since the Willamette Steam Mills had burned. [12] Shaver Transportation intended for No Wonder to take the place of Sarah Dixon. [12] Sarah Dixon had been built primarily for passenger work, but was being employed as a towboat by Shaver. [12]
With the acquisition of No Wonder, Shaver intended to return the Sarah Dixon to passenger work on the run from Portland to The Dalles, Oregon, but only after a haul-out and some extensive repairs. [12]
On October 11, 1902, on the Cowlitz River, No Wonder ran upon a snag while towing a raft of cottonwood logs. [19] This tore a hole in the hull about 6 to 8 inches wide and 6 to 8 feet long. [19] The captain immediately cast off the tow, and headed to the opposite side of the Columbia River, where he beached the vessel at Rainier, Oregon. [19] On the night of Saturday, October 11, 1902, Captain Shaver departed Portland on the Sarah Dixon to investigate the damage. He was expected to return on Sunday, gather up a salvage crew and equipment, and return on the Dixon that Monday. [19]
On the afternoon of Tuesday, January 26, 1909, No Wonder sank as a result of a collision with the large side-wheel steamer T.J. Potter . [14] The incident occurred near the mouth of the Willamette River, near Gillihan, in a thick fog. [14] [20] Running under Capt. Fred Stimson, No Wonder was towing a raft of boom logs, and, upon approaching the Potter, gave two blasts of the steam whistle. [14] Stimson heard no reply from the Potter. [14] The two steamers collided, and the hull of No Wonder, which sustained heavy damage in the forward part, began to fill with water. [14] Captain Stimson immediately headed No Wonder in towards the river bank, where he grounded the vessel, after which the crew of 13 escaped unharmed. [14] The after part of No Wonder sank below the surface of the water.
The collision was investigated on February 1, 1909 by the U.S. Steamboat Inspection Service. [20] There was no damage to the T.J. Potter. [20] Damage to No Wonder was estimated at $300. [20] As a result of the investigation, the license of Harry Haslam, acting pilot on the Potter, was suspended for 30 days. [20] Captain Stimson, of No Wonder, was exonerated. [20]
In October 1910, the boiler of the Dixon, which generated steam at 160 pounds pressure (or 200 pounds according to another source [21] ) was installed into No Wonder, replacing the old boiler, which produced only 100 pounds of steam pressure. [13] (The Dixon received a new boiler. [13] )
At the same time, the hull of the No Wonder was substantially rebuilt from amidships back to the stern, where new cylinder timbers were installed. [21] The stern-wheel had to be lifted out of place for this work to be done. [21]
On the morning of December 10, 1910, No Wonder was back in the water following reconstruction. That day, crewmen heard the cries of an inebriated man, who had fallen off the dock at the foot of Everett Street into the Willamette River. [22] Frank Watts and Burle Campbell launched a rowboat from No Wonder, and found Norman clinging to a piling, where they were able to rescue him. [22]
On Wednesday, October 25, 1911, No Wonder went aground on the middle Columbia river at Prindle’s Landing, near Cape Horn, where the steamer had stopped to pick up a log tow. [23] The Shaver stern-wheeler Wauna was initially sent to the scene to assist No Wonder, and later, on Saturday, October 28, Capt. “Dell” Shaver went himself with Sarah Dixon to assist Wauna. [23] The wind was blowing hard from the east, which seemed to be pushing the water away from the area where No Wonder was stranded, making it harder to refloat the vessel. [23] A report was that the east wind was blowing so hard that it was almost impossible to stand on the forward deck of Wauna approaching Cape Horn. [23]
Wauna was able to extricate No Wonder that Saturday night, by backing towards the stranded boat, while spinning the stern-wheel at full speed, and thereby making a channel deep enough for No Wonder to pass through. [24]
From September 1916 to April 1917, No Wonder was out of service (except for two days) due to a decline in the need for transport of logs. [25]
In 1917, the Hosford Transportation Company needed another steamer to handle a surfeit of logs, so they chartered No Wonder from Shaver Transportation. [26] In early November 1917 the Hosfords returned No Wonder to Shaver Transportation. [26]
Watchman D.W. Fairclaugh went missing from No Wonder in on the night of Tuesday, December 7, 1920. [27] The steamer was then in the vicinity of St. Helens, Oregon. Fairclaugh had been feeling ill, and been placed in his bunk by the crew. [27] The next morning his bunk was empty and he was not found on the boat. [27] The surmise was that he had fallen overboard during the night and drowned. [27] Fairclaugh was 55 years old and a resident of Portland, Oregon. [27]
On the afternoon of December 18, 1920, a body was found by the Coast Guard crew on the sand spit near Fort Canby. [28] The body was believed to be that of Fairclaugh. [28]
No Wonder was abandoned, either in 1930 [6] [9] or 1933. [10]
Sarah Dixon was a wooden sternwheel-driven steamboat operated by the Shaver Transportation Company on the Columbia and lower Willamette rivers from 1892 to 1926. Originally Sarah Dixon was built as a mixed use passenger and freight vessel, and was considered a prestige vessel for the time.
Emma Hayward commonly called the Hayward, was a steamboat that served in the Pacific Northwest. This vessel was once one of the finest and fastest steamboats on the Columbia River and Puget Sound. As newer vessels came into service, Emma Hayward was relegated to secondary roles, and, by 1891, was converted into a Columbia river tow boat.
Wallamet was a sidewheel-driven steamboat that operated on the Willamette and Columbia rivers in Oregon and later on the Sacramento and San Joaquin rivers in California. Built in a Mississippi river style that was not suited to the conditions of these rivers, and suffering from construction defects, Wallamet was not a financially successful vessel. The name of this vessel is often seen spelled as Willamette.
Unio was a small sternwheel-driven steamboat which operated on the Willamette and Yamhill rivers from 1861 to 1869. This vessel is primarily remembered for its having been named Unio when built in 1861, in the first year of the American Civil War, and then having the name completed, to Union, by a new, staunchly pro-Union owner, James D. Miller. Union appears to have sunk in 1869, been salvaged, and then dismantled, with the machinery going to a new steamer then being built for service on the Umpqua River.
The People's Transportation Company operated steamboats on the Willamette River and its tributaries, the Yamhill and Tualatin rivers, in the State of Oregon from 1862 to 1871. For a brief time this company operated steamers on the Columbia River, and for about two months in 1864, the company operated a small steamer on the Clackamas River.
Shoo Fly was a sternwheel-driven steamboat that operated on the Willamette and Columbia rivers in the 1870s. Originally built as primarily as a freight boat, the vessel was used in other roles, including towing and clearing of snags. Shoo Fly inspired the name of another sternwheeler on the Willamette River, Don't Bother Me.
Wenat was a stern-wheel steamboat that, under the name Swan, was built and operated, briefly, on the Tualatin River, in the state of Oregon. In 1858, Swan was sold, moved to the lower Willamette River, renamed Cowlitz, and placed on a route between Portland, Oregon the Cowlitz River.
Minnehaha was a sternwheel-driven steamboat which was built in 1866 on Oswego Lake, then known as Sucker Lake, in Oregon, United States. Minnehaha was later transferred to the Willamette and Columbia rivers where it operated for the first part of the 1870s.
Senator was a stern-wheel-driven steamboat which operated on the Willamette River in the state of Oregon from 1863 to 1875. Senator is chiefly remembered for its having been destroyed in a fatal boiler explosion in 1875 while making a landing at the Portland, Oregon waterfront in 1875.
Albany was a stern-wheel driven steamboat that operated on the Willamette River from 1868 to 1875. This vessel should not be confused with the later sternwheeler Albany, which ran, also on the Willamette River, from 1896 to 1906, when it was rebuilt and renamed Georgie Burton.
Occident was a steamer that operated on the Willamette River and occasionally its tributary, the Santiam River from 1875 to about 1890. Occident was designed primarily for freight work, and did not have passenger accommodations. This Occident should not be confused with the smaller steam launch Occident, apparently propeller-driven, which operated out of Astoria, Oregon in the 1890s.
Active was a stern-wheel driven steamboat that operated on the upper Willamette River from 1865 to 1872. During its short operational life, Active was owned by several different steamboat companies. It was dismantled in 1872 at Canemah, Oregon.
George Anson Pease was a well-known steamboat captain in the Pacific Northwest region on the United States, who was active from the earliest days of steamboat navigation on the Willamette River in the 1850s. He worked in various roles until the early 1900s, commanding numerous vessels during that time. During a flood in 1861, while in command of the sternwheeler Onward, Pease rescued 40 people from a flood in the area of Salem, Oregon.
Telephone was a sternwheel-driven steamboat built in 1884 by Captain Uriah Bonsor “U.B.” Scott for service on the Columbia River. Reputedly the fastest steamboat in the world in its time, Telephone served on the Columbia River and San Francisco Bay. Telephone was rebuilt at least twice. The first time was after a fire in 1887 which nearly destroyed the vessel. The reconstructed and much larger second vessel was sometimes referred to as Telephone No. 2. The third vessel, Telephone No. 3, built in 1903 and using components from the second steamer was larger but little used during its time on the Columbia river.
Manzanillo was a stern-wheel driven steamboat built at Portland, Oregon in 1881. Manzanillo was first run on the Columbia River route from Portland to Clatskanie, Oregon and way points along the river. The initial owner of the boat was the People's Freighting Company, but the Shaver family soon acquired control of the vessel, which became the first vessel of what is now Shaver Transportation Company.
Orient was a light-draft sternwheel-driven steamboat built in 1875 for the Willamette River Transportation Company, a concern owned by pioneer businessman Ben Holladay. Shortly after its completion, it was acquired by the Oregon Steam Navigation Company. Orient was a near-twin vessel of a steamer built at the same time, the Occident.
Governor Newell was a sternwheel-driven steamboat that operated from 1883 to 1902 in the Pacific Northwest.
La Center was a small stern-wheel steamboat that operated from 1912 to 1931, mostly on the Lewis and Lake rivers in southwest Washington, on a route to and from Portland, Oregon along the lower Columbia and lower Willamette rivers.
Clara Parker was a sternwheel-driven steamboat which was operated on the lower Columbia and lower Willamette rivers in the 1880s. The steamer ran for about ten years out of Astoria, Oregon in towing and jobbing work. In 1890 Clara Parker was rebuilt and renamed Astorian.
Undine was a sternwheel-driven steamboat that operated from 1887 to 1935 on the Columbia and lower Willamette rivers. From 1935 to 1940 the same vessel was operated under the name The Dalles.