Pear New Mill

Last updated

Pear New Mill Bredbury
Pear Mill, Bredbury - geograph.org.uk - 686556.jpg
Greater Manchester UK location map 2.svg
Red pog.svg
Location within Greater Manchester
Combined Egyptian Mills
Current statusClosed 1978, atanding
Location Bredbury, Stockport
Coordinates SJ 9120 9079
Construction
Built1912
Equipment
Mule Frames137,312
Ring Frames pathAfter 1950: 33,636 rings
References
[1]

Pear New Mill is a former Edwardian cotton spinning mill on the northern bank of the River Goyt in Bredbury, Stockport, Greater Manchester, England. It is a Grade II* listed building. [2]

Contents

Pear Mill was one of the last cotton spinning mills to be built in England, commencing production in July 1913. The architects were A.H. Stott & Sons but because of difficulties in financing, it was completed by P.S. Stott. The building is typical of their work, with concrete floors and meticulous detailing. It was designed as a double mill, but the second mill was never built.

The power was provided by a Manhattan-type steam engine by George Saxon & Co. Transmission was by rope drives. The mill had 137,312 mule spindles which remained until the 1950s, when they were replaced by 33,636 ring spindles, the mill being electrified at the same time. It ceased operation as a textile mill in March 1978.

Location

The mill was built next to the River Goyt, just outside the Borough of Stockport.

History

The Pear Spinning Company, Lower Bredbury, was registered in 1907, with the intention of erecting a large double mill. It was one of the Stockport Limiteds mills, modelled on the Oldham Limiteds. It had a share capital of £100,000 in £5 shares. Work began in 1908, but the demand for cotton ended and it was difficult to raise capital. With £55,000 spent, the shell of the mill had been completed when the company was put into liquidation in January 1912. In April a new company was floated to finish the mill. This was the Pear New Mill Limited – it had a capital of £90,000 in £3 shares. Production started in July 1913 and the mill was fully equipped for spinning medium and fine counts by November. Immediately production was interrupted by the 1914–1918 war. The two years between 1918 and 1920 were years of an exceptional boom, and the 1912 company was refloated with a capital of £250,000. This was the Pear New Mill (1919) Ltd company. The war had taken its toll on the Lancashire cotton industry and former markets such as India, China and Japan had built up their own spinning capacity. The price of cotton pieces fell to 38% of their 1913 value and though Pear New Mill did survive it lost its independence, and became part of Combined Egyptian Mills Ltd. [3]

Architecture

A large six-storey mill with steel frame and cast iron columns; the floors are of concrete. It was built by Stott and Sons but when Abraham Stott Junior was removed from the board of directors, the contract passed to his cousin and rival P.S. Stott. The mill has seven storeys if the cellar is counted, and attached are two-storey extensions for carding. The office is separate from the mill. Stott mills were known for their careful detailing, extensively using terracotta to detail red Accrington brick and large windows. The window heads are flat, except on the top storey, where round-headed arches were used. The window heads were picked out in yellow brick. [3]

The pear 'signature theme' of the building includes a large pear-shaped concrete cupola on top of the water tower at the south-east corner, and pear-shaped finials at each corner of the flat roof. Ornate terracotta friezes over the main entrances continue the theme with bas-relief depictions of pear leaves and fruit. [2]

Power

It was powered by a George Saxon 5000 hp twin Manhattan Compound, made in 1912. Running at 180 psi, it had two 30 in HP cylinders and two 60 in low-pressure cylinder. It had a 4-foot-6-inch stroke and operated a 23-foot-diameter flywheel at 80.5 rpm and 26 ropes; the flywheel had 73 rope grooves and was 15 feet wide, probably the widest in any cotton mill. It had drop valves on horizontal HP cylinders and Corliss valves on vertical LP cylinders. Tail rod support guides were on HP cylinders. Air pumps were driven from LP crossheads. It was removed by Mr Jim Price in 1962. [4] The later ring frames were electrically driven.

Equipment

The mill had 52 pairs of spinning mules with a total of 137,312 spindles, and employed approximately 300 people. In 1929 the mill was acquired by Combined Egyptian Mills Ltd, a merger of 15 small companies that controlled over 30 mills. The building was modernised in the late 1950s, when electrically driven ring frames were installed, and in 1965 it was taken over by Carrington Viyella. [3]

Usage

Originally it was designed to spin best Egyptian cottons, in what was technically termed "combed" and "super carded yarns." However, in 1913 it started spinning mediums, 34s to 78s from American, Brazilian and Egyptian. By 1916 it had dropped Brazilian and did 40s to 90s, it then in 1917 purchased combing equipment and produced up to 120s then by 1929 it purchased Egyptian solely and ran 140s. They employed 300 people. The cotton count is a measure of the fineness of the yarn, the higher number being the finer. Egyptian cotton has the longest staple so is most suitable for fine counts. [3]

Owners

See also

Related Research Articles

<span class="mw-page-title-main">Tudor Mill, Ashton-under-Lyne</span> Cotton mill in Greater Manchester, England

Tudor Mill was cotton spinning mill in Ashton-under-Lyne, in the historic county of Lancashire, England. It was built between 1901 and 1903 for the Ashton Syndicate by Sydney Stott of Oldham. Tudor Mill was next to the Ashton Canal Warehouse at Portland Basin. It ceased spinning cotton in the 1960s and was used as a warehouse until it was destroyed by fire in 1970

<span class="mw-page-title-main">Minerva Mill, Ashton-under-Lyne</span> Cotton mill in Greater Manchester, England

Minerva Mill was a cotton spinning mill in Ashton-under-Lyne, Greater Manchester, England. It was built between 1891 and 1892 for the Minerva Spinning Company which was later known as the Ashton Syndicate. Minerva Mill was next to the later Texas mill, at Whitelands. It ceased spinning cotton in the 1920s and was demolished in 1937.

<span class="mw-page-title-main">Rock Mill, Ashton-under-Lyne</span> Cotton mill in Greater Manchester, England

Rock Mill was cotton spinning mill in the Waterloo district of Ashton-under-Lyne, Greater Manchester, in England. It was built between 1891 and 1893 for the Ashton Syndicate by Sydney Stott of Oldham. Rock Mill was built on the site of Wilshaw Mill retaining and using the octagonal chimney. It ceased spinning cotton in the 1960s and was demolished in 1971; the site became the location for the town's first Asda supermarket, which opened in 1972, until Asda relocated to a much larger new store site in Cavendish Street in 1989.

<span class="mw-page-title-main">Texas Mill, Ashton-under-Lyne</span> Former cotton spinning mill in Ashton-under-Lyne, England

Texas Mill was a cotton spinning mill in the Whitelands district of Ashton-under-Lyne, Greater Manchester, in England. It was built between 1905 and 1907 for the Ashton Syndicate by Sydney Stott of Oldham. It was destroyed in a massive fire on 22–23 October 1971. It had been re-equipped as a ring mill for spinning artificial fibres when it was destroyed.

Curzon Mill, later known as Alger Mill was a cotton spinning mill in the Hurst district of Ashton-under-Lyne, Greater Manchester, in England. It was built between 1899 and 1902 for the Ashton Syndicate by Sydney Stott of Oldham. It was a sister mill to the Atlas Mill. It was sold to the Alger Spinning Co. Ltd in 1911, and closed in 1942. It was then used as a cigarette factory by the J.A. Pattreiouex company until 1966, and then sold to the Qualitex company for the production of artificial fibres. It was still spinning artificial fibres in the 1990s and was demolished in 1994; the site being used for a housing estate.

<span class="mw-page-title-main">Cedar Mill, Ashton-under-Lyne</span>

Cedar Mill was a cotton spinning mill in the Hurst area of Ashton-under-Lyne, Greater Manchester, in England. It was built between 1903 and 1905 for the Ashton Syndicate by Sydney Stott of Oldham. It was the last mill in Ashton spinning cotton. It ceased in 1980. It was demolished and the land was used for housing.

<span class="mw-page-title-main">Broadstone Mill, Reddish</span> English cotton spinning mill

Broadstone Mill was a double cotton spinning mill on the eastern bank of the Stockport Branch Canal in Reddish, Stockport, Greater Manchester, England. Construction of the twin mills commenced in 1903 and was completed in 1907. They closed in 1957, and the southern mill and engine houses were demolished in 1965. The northern block went into multiple usage. It is now part of the Houldsworth Village development and used as a centre for small businesses, and a shopping outlet.

<span class="mw-page-title-main">Trent Mill</span> Cotton mill in Greater Manchester, England

Trent Mill was a cotton spinning mill on Duchess Street in Shaw and Crompton, Greater Manchester, England. It was built by F.W. Dixon & Son in 1908. It closed and was taken over by the Lancashire Cotton Corporation in 1929 reopened in 1938 and closed again in 1962, and was demolished in 1967.

<span class="mw-page-title-main">Rutland Mill</span> Cotton mill in Greater Manchester, England

Rutland Mill was a cotton spinning mill on Linney Lane, in Shaw and Crompton, Greater Manchester, England. It was built by F. W. Dixon & Son in 1907 for the Rutland Mill Co. Ltd. It was taken over by the Lancashire Cotton Corporation in 1935. By 1964, it was in the Courtaulds Group. In the late 1980s, as Courtaulds moved operations to other parts of the world, the mill was bought by Littlewoods who demolished it and replaced it with a new automated storage warehouse.

<span class="mw-page-title-main">Ace Mill, Hollinwood</span>

Ace Mill is a cotton spinning mill in Chadderton in the Metropolitan Borough of Oldham, Greater Manchester. It was built as Gorse No. 2 Mill, in 1914 and cotton was first spun in 1919 by the Ace Mill Ltd, who renamed the mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1967.

Palmer Mills were cotton spinning mills in Portwood, Stockport, Greater Manchester, England. Built in the late 19th century, they were taken over by the Lancashire Cotton Corporation in the 1930s and sold on. Renamed the Stockport Paper Mill, they survived into the 21st century when they were demolished to be replaced by modern businesses.

<span class="mw-page-title-main">Vernon Mill, Stockport</span> Cotton mill in Greater Manchester, England

Vernon Mill is a former cotton spinning mill in Portwood, Stockport, Greater Manchester, England. Built in 1881, it was taken over by the Lancashire Cotton Corporation in 1930 and later sold on. Although still in business use, it is now a grade II listed building.

<span class="mw-page-title-main">Welkin Mill, Lower Bredbury</span> Cotton spinning mill in Stockport, Greater Manchester, England

Welkin Mill, Lower Bredbury is a cotton spinning mill in Lower Bredbury/Portwood, Stockport, Greater Manchester. It was built in the early years of the 20th century for ring spinning. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1967. The 162,000 sq ft (15,100 m2), four-storey mill occupies a 5.15 acres (2.08 ha) site on Welkin Road.

<span class="mw-page-title-main">Stalybridge Mill, Stalybridge</span> Cotton mill in Greater Manchester, England

Stalybridge Mill, Stalybridge is a cotton spinning mill in Stalybridge, Tameside, Greater Manchester, England. It was built in 1868, and the engine reconfigured in around 1925. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964.

<span class="mw-page-title-main">Manor Mill, Chadderton</span> Cotton mill in Greater Manchester, England

Manor Mill, Chadderton is an early twentieth century, five storey cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1906. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1990.

<span class="mw-page-title-main">Heron Mill, Hollinwood</span> Cotton spinning mill in Oldham, Greater Manchester, England

Heron Mill is a cotton spinning mill in Hollinwood, Oldham, Greater Manchester. It was designed by architect P. S. Stott and was constructed in 1905 by the Heron Mill Company Ltd next to Durban Mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1960, and it was used by Courtaulds for offices, warehousing, and some experimental fabric manufacture. Courtaulds occupation ended in 1994.

<span class="mw-page-title-main">Stott and Sons</span>

Stott and Sons was an architectural practice in Lancashire between 1847 and 1931. It specialised in cotton mills, designing 191 buildings of which 130 were mills or buildings related to the cotton industry. Abraham Henthorn Stott was born on 25 April 1822 in the parish of Crompton. He served a seven-year apprenticeship with Sir Charles Barry, the architect of the Houses of Parliament and Manchester Art Gallery. Abraham returned to Oldham in 1847 and founded the architectural practice of A H Stott. It was known for his innovative structural engineering. His brother Joseph Stott in 1866 started his career here before leaving to start his own practice. Three of his nine children worked in the practice. Jesse Ainsworth Stott became the senior partner. Philip Sydney Stott spent three years in the practice before starting his own. After Abraham's retirement his practice was renamed Stott and Sons.

<span class="mw-page-title-main">Ellenroad Mill</span> Cotton mill in Newhey, Milnrow, Rochdale, England

Ellenroad Mill was a cotton spinning mill in Newhey, a village in the Milnrow area of Rochdale, England. It was built as a mule spinning mill in 1890 by Stott and Sons and extended in 1899. It was destroyed by fire on 19 January 1916. When it was rebuilt, it was designed and equipped as a ring spinning mill.

Combined Egyptian Mills Ltd was a British textile joint-stock company established in 1929 with headquarters at Howe Bridge Mills in Atherton, then in Lancashire, to buy and return to profitability, 34 financially failing cotton mills owned by 16 companies. It was at that time the world's second largest cotton spinning company with 3.2 million spindles. In 1953 the company name changed to Combined English Mills. Viyella took over company in the 1960s.

<span class="mw-page-title-main">Clarence Mill</span> Cotton spinning mill in Bollington, Cheshire, England

Clarence Mill is a five-storey former cotton spinning mill in Bollington, Cheshire, in England. It was built between 1834 and 1877 for the Swindells family of Bollington. It was built alongside the Macclesfield Canal, which opened in 1831.

References

Notes
  1. English Heritage Building ID: 210903
  2. 1 2 Historic England. "Pear New Mill (1240634)". National Heritage List for England . Retrieved 11 February 2016.
  3. 1 2 3 4 5 Holden 1987 , pp. 24–28
  4. Roberts 1921
Bibliography

Further reading