Personal Digital Cellular

Last updated

Personal Digital Cellular (PDC) was a 2G mobile telecommunications standard used exclusively in Japan.[ citation needed ]

Contents

After a peak of nearly 80 million subscribers to PDC, it had 46 million subscribers in December 2005, and was slowly phased out in favor of 3G technologies like W-CDMA and CDMA2000. At the end of March 2012, the count had dwindled down to almost 200,000 subscribers. NTT Docomo shut down their network, mova, on April 1, 2012 at midnight. [1]

Technical overview

Like D-AMPS and GSM, PDC uses TDMA. The standard was defined by the RCR (later became ARIB) in April 1991, and NTT DoCoMo launched its Digital mova service in March 1993. PDC uses 25 kHz carrier, pi/4-DQPSK modulation with 3-timeslot 11.2 kbit/s (full-rate) or 6-timeslot 5.6 kbit/s (half-rate) voice codecs.

PDC is implemented in the 800 MHz (downlink 810–888 MHz, uplink 893–958 MHz), and 1.5 GHz (downlink 1477–1501 MHz, uplink 1429–1453 MHz) bands. The air interface is defined in RCR STD-27 and the core network MAP by JJ-70.10. NEC, Motorola, and Ericsson are the major network equipment manufacturers.[ citation needed ]

The services include voice (full and half-rate), supplementary services (call waiting, voice mail, three-way calling, call forwarding, and so on), data service (up to 9.6 kbit/s CSD), and packet-switched wireless data (up to 28.8 kbit/s PDC-P). Voice codecs are PDC-EFR and PDC-HR.

Compared to GSM, PDC's weak broadcast strength allows small, portable phones with light batteries at the expense of substandard voice quality and problems maintaining the connection, particularly in enclosed spaces like elevators.

PDC-EFR

PDC Enhanced Full Rate is a speech coding standard that was developed by ARIB in Japan and used in PDC mobile networks in Japan. The carriers use one of those codecs as PDC-EFR: CS-ACELP 8 kbit/s (a.k.a. NTT DoCoMo Hypertalk) and ACELP 6.7 kbit/s (a.k.a. J-PHONE Crystal Voice). [2] [3]

The PDC-EFR CS-ACELP uses G.729. The PDC-EFR ACELP is compatible with the AMR mode AMR_6.70.

PDC-HR

PDC Half Rate is a speech coding standard that was developed by ARIB in Japan and used in PDC mobile networks in Japan. It operates with a bit-rate of 3.45 kbit/s and is based on Pitch Synchronous Innovation CELP (PSI-CELP). [4]

Operators of PDC service

Standardization organizations

See also

Related Research Articles

<span class="mw-page-title-main">GSM</span> Cellular telephone network standard

The Global System for Mobile Communications (GSM) is a standard developed by the European Telecommunications Standards Institute (ETSI) to describe the protocols for second-generation (2G) digital cellular networks used by mobile devices such as mobile phones and tablets. GSM is also a trade mark owned by the GSM Association. GSM may also refer to the Full Rate voice codec.

Speech coding is an application of data compression to digital audio signals containing speech. Speech coding uses speech-specific parameter estimation using audio signal processing techniques to model the speech signal, combined with generic data compression algorithms to represent the resulting modeled parameters in a compact bitstream.

<span class="mw-page-title-main">G.723.1</span> ITU-T Recommendation

G.723.1 is an audio codec for voice that compresses voice audio in 30 ms frames. An algorithmic look-ahead of 7.5 ms duration means that total algorithmic delay is 37.5 ms. Its official name is Dual rate speech coder for multimedia communications transmitting at 5.3 and 6.3 kbit/s. It is sometimes associated with a Truespeech trademark in coprocessors produced by DSP Group.

<span class="mw-page-title-main">Freedom of Mobile Multimedia Access</span> Mobile network in Japan

Freedom of Mobile Multimedia Access (FOMA) is the brand name of the W-CDMA-based 3G telecommunications services being offered by the Japanese telecommunications service provider NTT DoCoMo. It is an implementation of the Universal Mobile Telecommunications System (UMTS) and was the world's first 3G mobile data service to commence commercial operations.

The Adaptive Multi-Rateaudio codec is an audio compression format optimized for speech coding. AMR is a multi-rate narrowband speech codec that encodes narrowband (200–3400 Hz) signals at variable bit rates ranging from 4.75 to 12.2 kbit/s with toll quality speech starting at 7.4 kbit/s.

Enhanced Full Rate or EFR or GSM-EFR or GSM 06.60 is a speech coding standard that was developed in order to improve the quality of GSM.

Full Rate was the first digital speech coding standard used in the GSM digital mobile phone system. It uses linear predictive coding (LPC). The bit rate of the codec is 13 kbit/s, or 1.625 bits/audio sample. The quality of the coded speech is quite poor by modern standards, but at the time of development it was a good compromise between computational complexity and quality, requiring only on the order of a million additions and multiplications per second. The codec is still widely used in networks around the world. Gradually FR will be replaced by Enhanced Full Rate (EFR) and Adaptive Multi-Rate (AMR) standards, which provide much higher speech quality with lower bit rate.

Adaptive Multi-Rate Wideband (AMR-WB) is a patented wideband speech audio coding standard developed based on Adaptive Multi-Rate encoding, using a similar methodology to algebraic code-excited linear prediction (ACELP). AMR-WB provides improved speech quality due to a wider speech bandwidth of 50–7000 Hz compared to narrowband speech coders which in general are optimized for POTS wireline quality of 300–3400 Hz. AMR-WB was developed by Nokia and VoiceAge and it was first specified by 3GPP.

Algebraic code-excited linear prediction (ACELP) is a speech coding algorithm in which a limited set of pulses is distributed as excitation to a linear prediction filter. It is a linear predictive coding (LPC) algorithm that is based on the code-excited linear prediction (CELP) method and has an algebraic structure. ACELP was developed in 1989 by the researchers at the Université de Sherbrooke in Canada.

<span class="mw-page-title-main">G.722</span> ITU-T recommendation

G.722 is an ITU-T standard 7 kHz wideband audio codec operating at 48, 56 and 64 kbit/s. It was approved by ITU-T in November 1988. Technology of the codec is based on sub-band ADPCM (SB-ADPCM). The corresponding narrow-band codec based on the same technology is G.726.

Extended Adaptive Multi-Rate – Wideband (AMR-WB+) is an audio codec that extends AMR-WB. It adds support for stereo signals and higher sampling rates. Another main improvement is the use of transform coding additionally to ACELP. This greatly improves the generic audio coding. Automatic switching between transform coding and ACELP provides both good speech and audio quality with moderate bit rates.

Selectable Mode Vocoder (SMV) is variable bitrate speech coding standard used in CDMA2000 networks. SMV provides multiple modes of operation that are selected based on input speech characteristics.

FS-1016 is a deprecated secure telephony speech encoding standard for Code-excited linear prediction (CELP) developed by the United States Department of Defense and finalized February 14, 1991.

Code-excited linear prediction (CELP) is a linear predictive speech coding algorithm originally proposed by Manfred R. Schroeder and Bishnu S. Atal in 1985. At the time, it provided significantly better quality than existing low bit-rate algorithms, such as residual-excited linear prediction (RELP) and linear predictive coding (LPC) vocoders. Along with its variants, such as algebraic CELP, relaxed CELP, low-delay CELP and vector sum excited linear prediction, it is currently the most widely used speech coding algorithm. It is also used in MPEG-4 Audio speech coding. CELP is commonly used as a generic term for a class of algorithms and not for a particular codec.

Wideband audio, also known as wideband voice or HD voice, is high definition voice quality for telephony audio, contrasted with standard digital telephony "toll quality". It extends the frequency range of audio signals transmitted over telephone lines, resulting in higher quality speech. The range of the human voice extends from 100 Hz to 17 kHz but traditional, voiceband or narrowband telephone calls limit audio frequencies to the range of 300 Hz to 3.4 kHz. Wideband audio relaxes the bandwidth limitation and transmits in the audio frequency range of 50 Hz to 7 kHz. In addition, some wideband codecs may use a higher audio bit depth of 16 bits to encode samples, also resulting in much better voice quality.

<span class="mw-page-title-main">G.718</span> ITU-T Recommendation

G.718 is an ITU-T Recommendation embedded scalable speech and audio codec providing high quality narrowband speech over the lower bit rates and high quality wideband speech over the complete range of bit rates. In addition, G.718 is designed to be highly robust to frame erasures, thereby enhancing the speech quality when used in Internet Protocol (IP) transport applications on fixed, wireless and mobile networks. Despite its embedded nature, the codec also performs well with both narrowband and wideband generic audio signals. The codec has an embedded scalable structure, enabling maximum flexibility in the transport of voice packets through IP networks of today and in future media-aware networks. In addition, the embedded structure of G.718 will easily allow the codec to be extended to provide a superwideband and stereo capability through additional layers which are currently under development in ITU-T Study Group 16. The bitstream may be truncated at the decoder side or by any component of the communication system to instantaneously adjust the bit rate to the desired value without the need for out-of-band signalling. The encoder produces an embedded bitstream structured in five layers corresponding to the five available bit rates: 8, 12, 16, 24 & 32 kbit/s.

Tandem Free Operation (TFO) is a part of ETSI's 3GPP standard specification, which has been included from R99 of the standards specifications onwards.

<span class="mw-page-title-main">Voice over LTE</span> High-speed wireless communication functionality

Voice over LTE (VoLTE) is an LTE high-speed wireless communication standard for voice calls using mobile phones and data terminals. VoLTE has up to three times more voice and data capacity than older 3G UMTS and up to six times more than 2G GSM. It uses less bandwidth because VoLTE's packet headers are smaller than those of unoptimized VoIP/LTE. VoLTE calls are usually charged at the same rate as other calls.

Enhanced Voice Services (EVS) is a superwideband speech audio coding standard that was developed for VoLTE and VoNR. It offers up to 20 kHz audio bandwidth and has high robustness to delay jitter and packet losses due to its channel aware coding and improved packet loss concealment. It has been developed in 3GPP and is described in 3GPP TS 26.441. The application areas of EVS consist of improved telephony and teleconferencing, audiovisual conferencing services, and streaming audio. Source code of both decoder and encoder in ANSI C is available as 3GPP TS 26.442 and is being updated regularly. Samsung uses the term HD+ when doing a call using EVS.

References

  1. "DOCOMO to Terminate mova and DoPa 2G Services". 2012. Archived from the original on February 29, 2012. Retrieved March 1, 2012.
  2. ARIB RCR STD-27L, Personal Digital Cellular Telecommunication System RCR Standard "5.3 CS-ACELP speech CODEC" and "5.4 ACELP Speech CODEC"
  3. IEICE Knowledge-Base Category 2. Part 8. Chapter 3. The encoding methods for mobiles IEICE
  4. ARIB RCR STD-27L, Personal Digital Cellular Telecommunication System RCR Standard 5.2 Half-rate speech CODEC