SAAB 21 | |
---|---|
General information | |
Type | Fighter and attack aircraft |
National origin | Sweden |
Manufacturer | SAAB |
Status | Retired |
Primary user | Swedish Air Force |
Number built | 298 |
History | |
Manufactured | 1945–1949 |
Introduction date | 1 December 1945 |
First flight | 30 July 1943 |
Retired | 23 July 1954 |
Developed into | SAAB 21R |
The SAAB 21 is a Swedish single-seat low-wing monoplane fighter and attack aircraft designed and manufactured by SAAB. Its twin boom fuselage with a pusher engine gave the aircraft an unusual appearance.
Work began at SAAB following a Swedish Air Force decision to embark on a major expansion programme in preparation for the possibility of being drawn into the Second World War. The company designed a monoplane twin-boom aircraft, powered by a single Daimler-Benz DB 605B engine that was positioned at the rear of the fuselage nacelle, driving a pusher propeller. This arrangement allowed guns to be carried in the aircraft's nose while providing the pilot with good visibility. An ejection seat was adopted to enable the pilot to bail out without hitting the propeller.
On 30 July 1943, the 21 performed its maiden flight and on 1 December 1945, the first examples of the J 21A-1 were introduced to service. It was quickly followed by the improved J 21A-2, which featured heavier armament, and the A 21A-3 fighter-bomber.
With jet-powered aircraft rapidly overtaking piston-powered aircraft, in 1947 SAAB produced a conversion of the 21 using the British de Havilland Goblin jet engine, the resulting airframe being designated the SAAB 21R. Along with the Soviet Yakovlev Yak-3, the SAAB 21 was one of only two jet fighters to be successfully converted from piston power to jet power. [1]
The 21 was replaced in the mid-1950s after less than 10 years of service by the similarly configured de Havilland Vampire and the Saab 29 Tunnan.
SAAB was carrying out design studies during the late 1930s into possible options for a new fighter aircraft. Many of these had been based around the use of a British Bristol Taurus radial engine and some were unconventional for the time. [2] One of the configurations studied was of a monoplane pusher configuration twin-boom aircraft, with the engine behind the pilot at the rear of a central nacelle. This unorthodox design possessed several advantages, such as the ability to concentrate most of the guns in the aircraft's nose, good pilot visibility, and ease of service. [2] While this promising design study was completed, it remained dormant until 1941, when defence considerations heightened the imminent need for it. [2]
At the start of Second World War, the Swedes became concerned about maintaining their neutrality and independence as they would soon be threatened by one or more European nations. As an emergency measure, the Swedish Air Force embarked upon a major rearmament and expansion of their military during the 1939–1941 period, which included the procurement of foreign-sourced aircraft as well as the local development of new, modern designs. [3] However, as a consequence of the war, few nations at war were willing to supply fighters to a neutral country, while Sweden's own production capability would be insufficient until at least 1943. As a consequence, Sweden was forced to purchase already obsolete Fiat CR.42 biplanes from Italy as an interim measure, and which were of little value against modern monoplane fighters. [4] [3] Accordingly, SAAB began looking at solutions to various anticipated production problems for their proposed fighter. [2]
The SAAB J 21 needed a top speed of at least 480 km/h (300 mph), which required a powerful engine. It was decided to substitute the Taurus engine for the American Pratt & Whitney R-1830 Twin Wasp radial engine. [2] However Svenska Flygmotor was also asked to provide an alternative to the Twin Wasp. Options were limited by the urgency involved, leaving a license-produced engine as the only option. Accordingly, a locally built version of Germany's new 1,100 kW (1,500 hp) Daimler-Benz DB 605B inline engine was selected, however, due to the DB 605B's lack of maturity, a great deal of refinement and modification by Swedish engineers was required to ready it for operational use. [5]
The SAAB 21 was an unorthodox twin-boom low wing pusher configuration fighter aircraft with a tricycle landing gear, and a heavy forward-firing armament. [6] Several recent innovations were incorporated into its design, including an ejection seat for the pilot while the pusher layout later allowed the type to be readily re-engined with a turbojet. The advantages of a pusher design include an unobstructed forward view for the pilot, and the armament can be concentrated in the nose, however, a major drawback is difficulty in making an emergency exit as the pilot could get drawn into the propeller blades. Many solutions were examined, such as jettisoning either the propeller or the engine via explosive charges prior to bailing out, before it was decided to adopt an ejection seat developed by Swedish defense firm Bofors, in parallel with the fighter. [7] [8] The J 21 was one of the first operational aircraft in the world with an ejection seat. [2]
The wing of the 21 was built around a SAAB-designed laminar airfoil. As the wings could not readily accommodate the main landing gear when retracted, wells were provided in the tail booms, aft of the rear wing spar. [6] To reduce drag, coolers and ducts for the engine were located in the wing section between the fuselage and tail booms, and integral fuel tanks were fitted. [6]
The armament initially consisted of one nose mounted 20 mm (0.79 in) Hispano-Suiza Akan m/41A and four 13.2 mm (0.52 in) Akan m/39AA autocannons, two in the wings, and two in the nose. On the A-2 the 20 mm (0.79 in) guns were replaced with belt fed 20 mm (0.79 in) Bofors Akan m/45. The J 21A-3 (later designated A 21A) could carry rockets and bombs. Later in the Saab 21's service life the 13.2 mm (0.52 in) autocannons were rebarreled to fire American 12.7 mm (0.50 in) ammunition due to economics. These improved firing performance but the Saab 21 was now only viable as a ground attack aircraft due to the rate of change in fighter design.
Three prototypes were completed of which only two were to be flyable, while the third was a static airframe for stress testing purposes. [6] On 30 July 1943, the first J 21 prototype conducted its maiden flight, flown by SAAB test pilot Claes Smith. During takeoff, he used too much flap, impairing acceleration and climb. This resulted in it hitting a fence and damaging the undercarriage, although he was able to land successfully afterwards. [9] [6]
During 1945, several options were explored to improve the 21's performance. [10] During the first half of the year, the company was working on a variant that would be powered by a 1,500 kW (2,000 hp) Rolls-Royce Griffon engine to give the 21 a projected top speed of 669 km/h (416 mph). Other projects, such as the Saab 27 were also designed for the Griffon, however all work on piston-engine upgrades was abandoned by the end of the year. [10] In parallel with these studies, SAAB and other Swedish companies had been evaluating the adoption of jet propulsion. Two early studies, designated as RX 1 and RX 2, were twin-boom aircraft similar to the 21. [11] Swedish Air Force enthusiasm for a jet fighter in late 1945 pushed SAAB to produce a version of the J 21 using jet propulsion. [12]
At Swedish Air Force request, existing J 21 aircraft were converted to jet propulsion in 1947 and redesignated J 21R . [13] This required modifications to over 50 per cent of the airframe, including the tailplane and wing. The aircraft was to be powered by a single British-sourced de Havilland Goblin turbojet engine, to replace the DB 605B. It entered Swedish Air Force service as their first jet aircraft.
The first example from the first batch of 54 of the first production variant, the J 21A-1 was delivered to the Swedish Air Force on 1 December 1945. [6] Construction was at SAAB's main plant in Trollhättan and deliveries of this model ran until 5 December 1946, when deliveries of two batches totalling 124 of the J 21A-2 began. A third order, in two batches totalling 119 of the A21A-3 fighter-bomber completed production of the piston-engine variants. [14] A total of 298 J 21As were constructed prior to the production line ending in 1948. [14]
During December 1945, the Svea Wing (F 8) became the first fighter unit to receive the J 21. [14] During the following year, other units of the Swedish Air Force, such as Göta Wing (F 9), also began to receive the type. However, within less than four years, some squadrons were already being re-equipped with a new generation of jet fighters capable of far greater speed, such as the de Havilland Vampire. [15] Despite the original intention for the type to be principally used in air defence roles, in service, the J 21 was utilized mainly in the light bomber role. The type was used only by the Swedish Air Force.
Officials doubted its effectiveness due to its unconventional design. [10] In response, the Swedish Air Board requested that SAAB study a development with the engine in the nose as the J 23 . [10] This aircraft used the J 21's DB 605B engine and had a more traditional appearance, similar to the North American P-51 Mustang, but its projected performance was reduced, which became a key factor in improving the J 21 instead. The Swedish Air Force became interested in jet propulsion and from 1945, SAAB began studying modifications of the airframe to accommodate a jet engine in place of its piston engine. [10] Production of the piston-engine version continued until 1948 while examples of the new jet engine version began being converted on the line. As a result of the conversions, the piston-engine powered J 21A began being retired in 1954. [7] [16]
J 21A-3 (later designated A 21A)
Three aircraft are preserved on permanent static display;
Data fromBeskrivning över fpl typ 21A, häfte 1 (description of airplane type 21A, booklet 1), [19] Beskrivning över fpl typ 21A, häfte 6 kap L. Beväpning (description of airplane type 21A, booklet 6, chapter L. armament), [20] SAAB J21/J21R [21]
General characteristics
Performance
Armament
Related development
Aircraft of comparable role, configuration, and era
Related lists
The Messerschmitt Me 210 was a German heavy fighter and ground-attack aircraft of World War II. Design started before the war, as a replacement for the Bf 110. The first examples were ready in 1939, but they proved to have unacceptably poor flight characteristics due to serious wing planform and fuselage design flaws. A large-scale operational testing program throughout 1941 and early 1942 did not cure the type's problems. The design entered limited service in 1942, but was soon replaced by the Messerschmitt Me 410 Hornisse, a further development of the Me 210. The failure of the Me 210's development program meant the Luftwaffe was forced to continue operating the Bf 110 after it had become outdated, despite mounting losses.
The Saab 35 Draken is a Swedish fighter-interceptor developed and manufactured by Svenska Aeroplan Aktiebolaget (SAAB) between 1955 and 1974. Development of the Saab 35 Draken started in 1948 as the Swedish air force future replacement for the then also in development Saab 29 Tunnan day fighter and Saab 32B Lansen all-weather fighter. It featured an innovative but unproven double delta wing, leading to the creation of a sub-scale test aircraft, the Saab 210, which was produced and flown to test this previously-unexplored aerodynamic feature. The full-scale production version entered service with frontline squadrons of the Swedish Air Force on March 8, 1960. It was produced in several variants and types, most commonly as a fighter-interceptor.
The Henschel Hs 132 was a jet-powered dive bomber and interceptor aircraft designed and produced by the German aircraft manufacturer Henschel Flugzeugwerke AG. It was developed during the latter portion of the Second World War with the intention of being adopted by the Luftwaffe, but this did not come to fruition.
The Saab 32 Lansen is a two-seat, transonic military aircraft designed and manufactured by the Swedish aircraft manufacturer Saab AB.
The Saab 29 Tunnan, colloquially also Flygande Tunnan, is an early jet-powered fighter aircraft designed and produced by the Swedish aircraft manufacturer Saab. It was the second turbojet-powered combat aircraft to be developed in Sweden, the first being the Saab 21R, and it was the first Western European fighter to be produced with a swept wing after the Second World War, only being preceded in Western Europe as a whole by the Messerschmitt Me 262 built during the conflict.
The Saab 105 is a Swedish high-wing, twinjet trainer aircraft developed in the early 1960s as a private venture by Saab AB. The Swedish Air Force, which had opted to procure the type for various roles, issued the aircraft with the designation Sk 60. The Sk 60 entered service in 1967, replacing the ageing De Havilland Vampire fleet.
The Saab 17 is a Swedish single-engine monoplane reconnaissance dive-bomber aircraft of the 1940s originally developed by ASJA prior to its merger into Saab. It was the first all-metal stressed skin aircraft developed in Sweden.
The Boeing XF8B was a single-engine aircraft developed by Boeing during World War II to provide the United States Navy with a long-range shipboard fighter aircraft. The XF8B was intended for operation against the Japanese home islands from aircraft carriers outside the range of Japanese land-based aircraft. Designed for various roles including interceptor, long-range escort fighter, dive-bomber, and torpedo bomber, the final design embodied a number of innovative features in order to accomplish the various roles. Despite its formidable capabilities, the XF8B-1 never entered series production.
The RP-3 was a British air-to-ground rocket projectile introduced during the Second World War. The "3 inch" designation referred to the nominal diameter of the rocket motor tube. The use of a 60 lb (27 kg) warhead gave rise to the alternative name of the "60-pound rocket". Though an air-to-ground weapon, it saw limited use in other roles. They were generally used by British fighter-bomber aircraft against targets such as tanks, trains, motor transport and buildings, as well as by Coastal Command and Royal Navy aircraft against U-boats and ships.
The Vultee XP-54 Swoose Goose was a prototype fighter built by the Vultee Aircraft Company for the United States Army Air Forces (USAAF).
The AIDC AT-3 Tzu Chung is an advanced jet trainer operated by the Republic of China Air Force (ROCAF). A total of sixty-two aircraft were manufactured by the Aerospace Industrial Development Corporation of Taiwan in collaboration with American aircraft manufacturer Northrop between 1984 and 1990. Two A-3 single-seat attack version were also built.
The Saab 18 was a twin-engine bomber and reconnaissance aircraft, designed and built by Svenska Aeroplan AB (SAAB) for use by the Swedish Air Force in response to a 1938 design competition. Due to delays, it did not enter service until 1944, but quickly became the standard Swedish bomber aircraft. Serving in the bomber, reconnaissance and ground-attack roles, it also assisted in the development of ejection seats and air-to-surface guided missiles until its replacement by the Saab Lansen in the late 1950s.
The Saab 21R was a Swedish fighter/attack aircraft developed and produced by Svenska Aeroplan AB (SAAB). It was a jet-powered development of the piston-engined SAAB 21 and was the first jet aircraft to be produced by Saab. The R-suffix stands for reaktion (reaction), referencing reaktionsdrift or reaktionsmotor. Along with the Soviet Yakovlev Yak-15, the 21R was one of only two jet fighters to have been successfully converted from piston-powered aircraft.
The FFVS J 22 was a Swedish single-engine fighter aircraft developed for the Swedish Air Force during World War II.
The I.Ae. 30 "Ñancú" was an Argentine twin piston engined fighter designed by the Instituto Aerotécnico in the late 1940s, similar to the de Havilland Hornet, but made of metal rather than wood. Only one prototype was completed; the project was abandoned in favour of the FMA I.Ae. 27 Pulqui I jet aircraft.
The Soko J-21 Jastreb, referred to as the J-1 Jastreb in some sources, is a Yugoslav single-seat, single-engine, light attack aircraft, designed by the Aeronautical Technical Institute (ATI) and Military Technical Institute (VTI), in Belgrade and manufactured by SOKO in Mostar. Derived from the G-2 Galeb advanced jet trainer and light attack aircraft, it was designed in single-seat ground-attack and two-seat advanced flying/weapon training versions.
The Mitsubishi J4M Senden or Navy Experimental 17-Shi Otsu B Type Interceptor Fighter Senden, Allied reporting name Luke, was a Japanese World War II fighter aircraft proposed by Mitsubishi Heavy Industries for use by the Imperial Japanese Navy. The J4M project did not proceed beyond the design stage.
The Mansyū Ki-98,, was a Japanese ground-attack aircraft proposed by Mansyū during World War II for use by the Imperial Japanese Army Air Force. The still unassembled components of the first prototype were deliberately destroyed before Japan surrendered.
The Messerschmitt Me 334 was a proposed German piston-engined fighter, designed by Alexander Lippisch. No examples were built.