It has been suggested that Burnaby-class ferry be merged into this article. (Discuss) Proposed since September 2024. |
Queen of Vancouver in Active Pass in 2007 | |
Class overview | |
---|---|
Name | V class (Victoria class) |
Operators | BC Ferries |
Preceded by | Sidney class |
Succeeded by | |
Subclasses | |
Built | 1962–1965 |
In service | 1962–present |
Planned | 7 |
Completed | 7 |
Active | 1 |
Scrapped | 5 |
The V-class ferries, also known as the Victoria class, originally included seven ferries operated by BC Ferries built between 1962 and 1965. The V class were a continuation of the previous Sidney-class design with some cosmetic changes and different engines. These vessels were the backbone of service on the Tsawwassen – Swartz Bay route prior to the arrival of MV Spirit of British Columbia in 1993. Four of these vessels underwent vehicle capacity increases three times. The lead ship of the class, Queen of Victoria suffered significant damage in a collision in 1970.
The vessels began to be retired in 2000. Four vessels were to be retired and sold in 2008. The transfer of Queen of Esquimalt was halted and she was broken up in Ensenada, Mexico. Both Queen of Nanaimo and Queen of Burnaby were retired in 2017. Queen of New Westminster is still in service with BC Ferries. Queen of Nanaimo was sold to a ferry company in Fiji and was eventually sold for scrap in June 2022. [1]
In 1958, the premier of British Columbia W.A.C. Bennett authorised the creation of a provincial ferry service. [2] The new service, known as the British Columbia Ferry Corporation ordered two ships constructed from shipyards in British Columbia which became the Sidney-class ferries. [3] The initial success of the first two led BC Ferries to order a further two new ships similar to the Sidney class, but with modifications based on lessons learned from the first two ships. The new ships would be also be designed by the naval architect Philip F. Spaulding and his Canadian partner Arthur McLaren but this time, BC Ferries would purchase the plans for the ships and not have to pay royalty payments. [4] Ordered in 1961, the two new ships were initially named City of Victoria and City of Vancouver. [5] The vessels were renamed to Queen of Victoria and Queen of Vancouver due to a change in fleetwide naming policy based on CP Ships naming their vessels "Princess". As a result, the larger vessels of the British Columbia Ferries fleet would have "Queen" placed in front of their original names and the smaller ones have it added to the end. The V class were intended to replace the ships BC Ferries had received from the Black Ball Line during its creation. [6]
Name | Builder | Launched | Completed | Fate |
---|---|---|---|---|
Queen of Victoria (ex-City of Victoria) | Victoria Machinery Depot, Victoria, British Columbia [7] | 24 October 1961 [8] | February 1962 [8] | sold 2001, renamed Queen of Ocoa, then Aan, scrapped 2006 [8] |
Queen of Vancouver (ex-City of Vancouver) | Burrard Dry Dock, North Vancouver, British Columbia [9] | 16 January 1962 [10] | April 1962 [10] | Broken up for scrap 2012 [10] |
Queen of Saanich | Victoria Machinery Depot, Victoria [11] | 28 November 1962 [12] | February 1963 [12] | Broken up for scrap 2012 [12] |
Queen of Esquimalt | 22 January 1963 [13] | March 1963 [13] | Sold 2010, renamed Princess Jacqueline, broken up 2011 [13] | |
Queen of Nanaimo | 3 December 1963 [14] | June 1964 [14] | Sold 2017, renamed Lomaiviti Princess V, [14] broken up 2022 [15] | |
Queen of New Westminster | 12 May 1964 [16] | July 1964 [16] | Active | |
Queen of Burnaby | 15 February 1965 [17] | May 1965 [17] | Sold 1994, renamed Royal Victorian, then Princess Marguerite III, reacquired 2000 and regained original name. [17] Retired 2017. |
As originally built, the vessels were of similar designs but with different engines. [18] The ships of the class were built in three batches. The first two (Queen of Victoria and Queen of Vancouver measured 104.3 metres (342 ft 2 in) long overall and 93.8 m (307 ft 9 in) between perpendiculars with a beam of 24 m (78 ft 9 in). They were assessed at 3,541 gross register tons (GRT). [8] [10] They were powered by twin Paxman diesel engines giving the vessels a maximum speed of 18 knots (33 km/h; 21 mph). The Paxman engines were cheaper to acquire than the Mirrlees diesels in the preceding Sidney class. [18] The first batch had a 106-car capacity and mainly cosmetic differences from the Sidney class, though the class was designed with future expansion in mind. [5]
The next batch of Queen of Saanich and Queen of Esquimalt had a length overall of 104.2 m (341 ft 10 in) and 94 m (308 ft 5 in) between perpendiculars with a beam of 23.9 m (78 ft 5 in) and were assessed at 3,547 GRT. [12] [13] The Paxman engines in the first batch had proved to be problematic, so BC Ferries had Fairbanks-Morse diesel engines installed in these two with no difference in speed. [18] The second batch had an original car capacity of 145 and could transport 1,000 passengers. [19]
The final batch of three, Queen of Burnaby, Queen of Nanaimo and Queen of New Westminster returned to the Mirrlees diesels of the Sidney class as the Fairbanks-Morse engines turned out to be just as problematic as the Paxmans. [18] The third batch ships measured 104.4 m (342 ft 6 in) overall, 93.8 m (307 ft 9 in) between perpendiculars with a beam of 23.9 m (78 ft 5 in). Queen of Nanaimo was initially assessed at 3,545 GRTQueen of New Westminster at 3,544 GRT and Queen of Burnaby at 3,542 GRT. [14] [16] [17]
The seven ships were modified twice in quick succession to increase vehicle capacity. The first refit was the installation of ramps and platform car decks in 1968 that increased car capacity in 1968. [5] The second beginning in 1971 saw the ships sliced in half vertically across the beam for the insertion of a new 25.6-metre (84 ft) midsection, which dramatically increased their capacity. Beyond increasing the length of the ships, a new deluxe restaurant was added seating 48 persons, a 190-seat self-service cafeteria was installed, carpets and wall paneling and an open solarium was to the boat deck. The new midsections were pre-constructed to limit the time the ferries were out of service, turning it into a roughly three-month refit. [20] During the refit, 129 hydraulic jacks were welded into place and were used to open the ship up for the midsections to be slid into place. [21]
The first batch now had capacity for 192 cars and 1,250 passengers. They measured 120 m (395 ft) registered and 129.95 m (426 ft 4 in) long overall with a 23.95 m (78 ft 7 in) beam and a draught of 4.0 m (13 ft) and were assessed at 4,901 GRT, 3,321 net register tons (NRT) for Queen of Vancouver and 4,900 GRT and 3,314 NRT for Queen of Victoria. Their Paxman twin diesels created 4,969 kilowatts (6,664 horsepower ) and a speed of 18 knots. They had a crew of 55. [22] The second batch had the same capacity but measured 120 m (394 ft) registered and 130 m (426 ft) long overall with a 22.73 m (74 ft 7 in) beam and a 4.0 m draught. Their Fairbanks-Morse diesels created 4,800 kW (6,400 hp) and they retained their 18-knot speed. They were assessed at 4,907 GRT, 3,324.84 NRT for Queen of Saanich, and 4,890 GRT, 3,317 NRT for Queen of Esquimalt. [23] The third batch's Mirlees diesels created 4,500 kW (6,000 hp) and the ships varied in size, with all ships retaining the 4.0 m draught, and similar capacity with the first two batches. Queen of Burnaby now measured 121.44 m (398 ft 5 in) registered and 130 m (426 ft) long overall with a beam of 78 ft 7+1⁄2 in (23.965 m) and assessed at 4,890 GRT and 3,346 NRT. [24] Queen of New Westminster measured 120 m (394 ft) registered with the same length overall and beam as Queen of Burnaby, but was assessed at 4,904 GRT and 3,341 NRT. [25] [lower-alpha 1]
Beginning in 1981, the first four of the seven ships were cut horizontally from bow to stern to have a new vehicle deck inserted. These rebuilt ships retained the V-class designation. Car capacity increased to 400 for Queen of Esquimalt and Queen of Saanich, while Queen of Vancouver and Queen of Victoria increased to 284, as they retained extra room for overheight vehicles. During this refit, the ships all received new MaK diesel engines to replace the problematic Paxman and Fairbanks-Morse models. [26]
Queen of Burnaby and Queen of Nanaimo were two original ships without the new car deck; they received a new designation as Burnaby-class vessels. [5] Queen of New Westminster was lifted in 1991 and was fit with new Wartsila 9R-32D diesel engines to travel at 20 knots (37 km/h; 23 mph) comparable to the newer C-class ferries. [27] The engines create 3,375 kW (4,526 hp) each [27] for a total of 13,500 kW (18,100 hp). [28] She had a major refit of her passenger areas completed in 2009, preparing her for another ten to fifteen years of service. [29] The vessel measures 129.9 m (426 ft 2 in) with a beam of 23.9 m (78 ft 5 in), has a passenger and crew capacity of 1,332 and a car capacity of 254. [28]
Queen of Vancouver and Queen of Victoria entered service in 1962. They were followed by Queen of Saanich and Queen of Esquimalt. The vessels served on the Tsawwassen – Swartz Bay route. [30] Queen of Nanaimo, Queen of New Westminster and Queen of Burnaby were the last to enter service and operated on the Departure Bay – Horseshoe Bay route. [31] Queen of New Westminster remains in service. [28]
On 2 August 1970, Queen of Victoria was in transit through Active Pass with 626 passengers when the ferry was struck by the Soviet freighter Sergey Yesenin. Three passengers were killed in the incident and Queen of Victoria suffered significant damage, with the Soviet ship suffering minor damage. The results of the investigation found that the pilot aboard Sergey Yesenin was mainly at fault, though the master of Queen of Victoria was not spared blame. [32] Queen of Victoria was towed back to port. [33] [34]
In 1992, while Queen of New Westminster was loading passengers and vehicles at Departure Bay, a van was directed to stop on the apron of the shore loading ramp to the upper deck of the ship. While the van was stopped, the ship began to depart, leaving the apron without support and causing the van to fall first onto Queen of New Westminster's deck and then into the water. Three people died in the incident, with three survivors (one suffering serious injury). BC Ferries was later found to be at fault in the following investigation. [27]
In 1994 Queen of Burnaby was transferred to the Victorian Line and renamed Royal Victorian. In 1997, the ship was renamed Princess Marguerite III in 1997 before returning to BC Ferries ownership in 2000. Upon return to the BC Ferries fleet, the ship resumed using her initial name. [17]
Queen of Victoria was the first to be retired in 2001. The ship was sold to R & G Importadora & Exportadora of the Dominican Republic. and renamed Queen of Ocoa. Queen of Ocoa was scrapped in 2006 at Alang, India. [35]
Queen of Esquimalt was retired on 25 May 2008. The vessel was sold to Dalian Golden Sun I/E Co., Ltd. and docked in Port Alberni and renamed Princess Jacqueline. The ship was intended for further service in China, but Princess Jacqueline never left British Columbia waters and the sale was eventually halted due to court action. [36] In 2011 the vessel was scrapped at Ensenada, Mexico. [37]
Queen of Saanich was retired on 18 November 2008 and sold. The vessel was renamed Owen Bell and used as a logging camp on the coast of the Vancouver Island. The ship was later moved to be moored on the west side of Anvil Island in Howe Sound. Owen Bell was scrapped in 2012 at Ensenada, Mexico. [38] Queen of Vancouver was the next to be taken out of service on 15 April 2009. The ferry was sold to Coast Marine and moored at Woodfibre until 2012. The ship was then sent for scrapping at Ensenada, Mexico. [37]
Queen of Burnaby was retired in May 2017 (replaced by MV Salish Orca) [39] and Queen of Nanaimo was retired in September 2017 (replaced by MV Salish Eagle). [40] Queen of Nanaimo was sold to Goundar Shipping Ltd. of Fiji for service in the island nation. The ship was renamed Lomaiviti Princess V and services Savusavu and Kadavu Island. [41] [42] In June 2022, the ship was sold for scrap to a breaking yard in Alang, India. [15] Queen of Burnaby was no longer fit for sailing and was sold in 2018 on the condition that it be kept moored or scrapped. [43] However, the sale was not finalized and the vessel remains in Union Bay, British Columbia. [44]
British Columbia Ferry Services Inc., operating as BC Ferries (BCF), is a former provincial Crown corporation, now operating as an independently managed, publicly owned Canadian company. BC Ferries provides all major passenger and vehicle ferry services for coastal and island communities in the Canadian province of British Columbia. Set up in 1960 to provide a similar service to that provided by the Black Ball Line and the Canadian Pacific Railway, which were affected by job action at the time, BC Ferries has become the largest passenger ferry line in North America, operating a fleet of 41 vessels with a total passenger and crew capacity of over 27,000, serving 47 locations on the B.C. coast.
S-class ferries are roll-on/roll-off (RORO) ferries operated by BC Ferries in British Columbia, Canada. They are the largest ferries in the BC Ferries fleet. The class comprises two ships, Spirit of British Columbia and Spirit of Vancouver Island, which were completed in 1993 and 1994 respectively. They serve the ferry route between Tsawwassen and Swartz Bay. In 2017, the class underwent conversion to a dual-fuel propulsion system that would allow them to use either marine diesel fuel or liquefied natural gas.
The Burnaby class is a ship class of ferries in the BC Ferries' fleet, built between 1964 and 1965. There are two ships in this class: MV Queen of Burnaby and MV Queen of Nanaimo. Both are propelled by controllable-pitch propellers. Both were built with two Mirrlees National KVSSM, V-16, 4 stroke-cycle, diesel engines, each producing 3,000 brake horsepower (2,200 kW) at 320 revolutions per minute.
The MV Queen of New Westminster is a Canadian roll-on, roll-off passenger ferry operated by BC Ferries.
MV Queen of Nanaimo is a Burnaby-class passenger vessel that was operated by BC Ferries from the time it entered service in 1964 until 2017. Queen of Nanaimo was used to ferry passengers and vehicles from mainland British Columbia, Canada to the islands off its coast. In 2017, the vessel was sold to Goundar Shipping Ltd. and renamed MV Lomaiviti Princess V for service in Fiji.
Seaspan ULC provides marine-related services to the Pacific Northwest. Within the Group are three (3) shipyards, an intermodal ferry and car float business, along with a tug and barge transportation company that serves both domestic and international markets. Seaspan, is part of the Washington Companies that are owned by Dennis Washington. Kyle Washington, is the Executive Chairman of Seaspan, who has become a Canadian citizen.
MV Queen of Surrey is a double-ended C-class roll-on/roll-off ferry in the BC Ferries fleet. The ship was launched in 1980 and entered service in 1981. The ferry normally operates on BC Ferries' Horseshoe Bay to Langdale route. She is named for the city of Surrey. On May 12, 2003, Queen of Surrey suffered an engine fire that disabled the ferry in Howe Sound. No one was injured and the ship was returned to service. In 2004, the ferry was involved in a collision with a tugboat, and in 2019 she struck a fixed structure at the Langdale terminal. The 2019 crash lead to passengers being stranded on the vessel for over ten hours.
The Sidney class consisted of two roll-on/roll-off ferries, Queen of Sidney and Queen of Tsawwassen, built for the British Columbia Ferry Corporation in service from 1960 to 2008. The design for the ships was based on the ferry MV Coho with changes made to accommodate loading of vehicles through the bow of the vessel. Both vessels serviced different routes throughout their service lives.
MV Coastal Renaissance is the first of three Coastal-class ships delivered to BC Ferries. At the time of their construction, the Coastal-class ferries were the largest double-ended ferries in the world. This ship operates mainly on the Tsawwassen – Duke Point route in the peak season and on the Swartz Bay – Tsawwassen route in the low season, but can replace her sister ships on any of the major cross-Strait routes whenever they go for refits.
MV Coastal Inspiration is the second of three Coastal-class ships delivered to BC Ferries. Launched in 2007 and entering service in 2008, Coastal Inspiration operates on the Duke Point – Tsawwassen route in British Columbia. The vessel collided with the terminal at Duke Point on December 20, 2011, suffering significant damage that kept the ship in the dockyard until January 2012.
Victoria Machinery Depot Ltd. was a historic metalworks and shipyard in Victoria, Canada.
Spirit of Vancouver Island is an S-class ferry, part of the BC Ferries fleet. Along with MV Spirit of British Columbia, it is the largest in the BC Ferries fleet. The ship was completed in 1994 and serves the Swartz Bay – Tsawwassen route. In 2018, Spirit of Vancouver Island began a mid-life refit in Poland, where it was converted to a dual-fuel system to allow liquefied natural gas propulsion. The vessel returned to service in 2019.
An electoral redistribution was undertaken in 2008 in British Columbia in a process that began in late 2005 and was completed with the passage of the Electoral Districts Act, 2008 on April 10, 2008. The redistribution modified most electoral boundaries in the province and increased the number of MLAs from 79 to 85. The electoral boundaries created by the redistribution were first used in the 2009 provincial election.
MV Spirit of British Columbia is an S-class ferry, part of the BC Ferries fleet active along the British Columbia coast. It and Spirit of Vancouver Island represent the two largest ships in the fleet. The ship was completed in 1993 and serves the Tsawwassen–Swartz Bay route. In 2018, it underwent a mid-life refit that included conversion to a dual-fuel system that allows it to use either marine diesel oil or liquefied natural gas.
MV Motor Princess was a vehicle and passenger ferry built for Canadian Pacific in 1923. She was later renamed, Pender Queen then Pender Lady.
An electoral redistribution in British Columbia was undertaken by the BC Electoral Boundaries Commission beginning in 2014 and was formalized by the passage of Bill 42, the 2015 Electoral Districts Act, during the 40th British Columbia Parliament. The act came into effect on November 17, 2015. The redistribution added two seats to the previous total, increasing the number of MLAs in the province from 85 to 87. The electoral boundaries came into effect for the 2017 election. The next redistribution is required to occur following the 2020 British Columbia general election.
The Salish-class vessels are four intermediate-capacity ferries operated by BC Ferries and were built in 2016 at Remontowa Shipbuilding S.A. in Gdańsk, Poland. They were the first dual-fuel powered vessels in British Columbia service, capable of using liquified natural gas or diesel oil to operate. Salish Orca entered service on the Comox–Powell River route in May 2017. Salish Eagle entered service on the Tsawwassen–Southern Gulf Islands route in June 2017. Salish Raven entered service for the Southern Gulf Islands on August 3, 2017. These vessels replaced Queen of Nanaimo and Queen of Burnaby.
An electoral redistribution in British Columbia was undertaken by the BC Electoral Boundaries Commission in 2021. On October 21, 2021, the Government of British Columbia appointed Justice Nitya Iyer, Linda Tynan and Chief Electoral Officer Anton Boegman to serve as the 2021 commissioners. Justice Iyer was appointed the chair.