Developer | Robert J. Brown |
---|---|
Manufacturer | Atari, Inc. |
Type | music visualizer |
Release date | 1977 |
Introductory price | $169.95; equivalent to $821in 2022 |
The Atari Video Music (Model C240) is the earliest commercial electronic music visualizer released. It was manufactured by Atari, Inc., and released in 1977 [1] [2] for $169.95. [3] The system creates an animated visual display that responds to musical input from a Hi-Fi stereo system for the visual entertainment of consumers. [4]
By interpreting an input musical waveform, the Video Music translates the levels of musical intensity and mellowness into colors and shapes that are output to a graphical display. The console is attached to an audio source and then operated by an adhesive-backed switch box that is glued to the back of a television display. Audio signal visualizations take the basic form of a two-part diamond. The outer part represents the left audio channel while the right channel is represented by the inner part. Varying colors and shapes provide a wide variety of patterns, designs, and images depending on the audio sample played.
After the unit is powered on, a toggle switch may be used to select between "TV" (music visualization inactive), and "Game" (music visualization active). When in the "Game" position, visual data is broadcast on VHF channel 3 by default, but may be set to channel 4. [5] : 76 Unlike Atari's previous video game systems, the Video Music system's switch box featured a 75 Ohm pass-through F connector allowing the television antenna or cable to remain attached and thereby eliminating the tiresome process of detaching and reattaching the cable every time the user switched from watching normal television broadcasts to using the visualizer. [6] : 64–66 Any audio source may be used for visualization including Atari's video game system audio, [5] : 76 and visualizations can either be watched "live" on a television screen or recorded on a VCR by using a balun converter. [6] : 66
The Video Music hooks up to a TV through an RF switchbox. The other hook ups are left and right RCA jack inputs that hook up to an audio amplifier's RCA outputs. The face is a brushed metal plate and the sides are particle board with walnut veneer. The unit is turned on by pushing a power button, and visualization is controlled by five potentiometer knobs and 12 additional push-buttons. [5] : 76
The knob controls are as follows: [6] : 66–67
Gain
: Two knobs controlling the left and right audio input signals strength. These increase the size of the visual pattern.Color
: One knob controlling color. This increases the number of available colors from a solid color to a rainbow of colors.Contour
: Two knobs controlling the left and right audio input signals visual representations shapes from soft to geometric. These act to soften shapes or increase geometric complexity of the design.The push button controls are as follows: [6] : 67
Power
: Turns unit on and off.Shape (solid)
: Any Shape or Image that is displayed will be solidShape (hole)
: One stereo channel controls the outside with a hole in the center controlled by the other stereo channel.Shape (ring)
: Both stereo channels will represent two outline shapes that retain their thickness with the pulse of the musicShape (auto)
: The system automatically cycles at random between the different Shape settings as well as the next eight buttons:Horizontal 1
: Displays one generated image.Horizontal 2
: Displays two horizontal generated imagesHorizontal 3
: Displays three horizontal generated imagesHorizontal 5
: Displays five horizontal generated imagesVertical 1
: Displays one generated imageVertical 2
: Displays two vertical generated imagesVertical 4
: Displays four vertical generated imagesVertical 8
: Displays eight vertical generated imagesThe last four buttons have an auxiliary function when the "Auto" button is pushed. In this mode, three of these buttons represent Solid, Hole and Ring. When the unit is in auto, it will retain the shape of one of those three shapes. The fourth button is "Auto All". This sends the unit into semi-automatic mode, cycling through shape, horizontal and vertical options but not affecting the user-set gain, color or contour settings. [6] : 67
Developed under the codename Project Mood, the Video Music unit was designed by Robert Brown, [7] a developer of the home version of Pong . According to Atari design engineer, Al Alcorn, when Atari was on tour promoting the device, a Sears representative asked what the developers were smoking when they invented it. With that, a technician stepped forward holding up a lit joint. [8]
In March 1978, the unit was described in a patent under the name "Audio activated video display". [7] It is considered to have been commercially unsuccessful and production was discontinued after only one year on the market.[ citation needed ]
The Video Music system was reviewed in Video magazine as part of a special "VideoTest Report" in 1978. The reviewers gave it mild but positive coverage, describing it as "a well-constructed machine and an interesting component to be used as an adjunct to stereo sound," but warning that "once the novelty wears off the display can become somewhat monotonous." The same report recommended it for "those who find it relaxing, stimulating, or therapeutic to watch psychedelic displays." [6] : 67
Analog television is the original television technology that uses analog signals to transmit video and audio. In an analog television broadcast, the brightness, colors and sound are represented by amplitude, phase and frequency of an analog signal.
The Original Chip Set (OCS) is a chipset used in the earliest Commodore Amiga computers and defined the Amiga's graphics and sound capabilities. It was succeeded by the slightly improved Enhanced Chip Set (ECS) and the greatly improved Advanced Graphics Architecture (AGA).
The Vectrex is a vector display-based home video game console - the only one ever designed and released for the home market, that was developed by Smith Engineering and manufactured and sold by General Consumer Electronics. It was first released for the North America market in November 1982 and then Europe and Japan in 1983. Originally produced by General Consumer Electronics, it was later licensed to Milton Bradley after they acquired the company. Bandai released the system in Japan.
The Magnavox Odyssey is the first commercial home video game console. The hardware was designed by a small team led by Ralph H. Baer at Sanders Associates, while Magnavox completed development and released it in the United States in September 1972 and overseas the following year. The Odyssey consists of a white, black, and brown box that connects to a television set, and two rectangular controllers attached by wires. It is capable of displaying three square dots and one line of varying height on the screen in monochrome black and white, with differing behavior for the dots depending on the game played. Players place plastic overlays on the screen to display additional visual elements for each game, and one or two players for each game control their dots with the knobs and buttons on the controller by the rules given for the game. The console cannot generate audio or track scores. The Odyssey console came packaged with dice, paper money, and other board game paraphernalia to accompany the games, while a peripheral controller—the first video game light gun—was sold separately.
A graphics tablet is a computer input device that enables a user to hand-draw images, animations and graphics, with a special pen-like stylus, similar to the way a person draws images with a pencil and paper. These tablets may also be used to capture data or handwritten signatures. It can also be used to trace an image from a piece of paper that is taped or otherwise secured to the tablet surface. Capturing data in this way, by tracing or entering the corners of linear polylines or shapes, is called digitizing.
Composite video is an analog video format that typically carries a 525 or 625 line signal on a single channel, unlike the higher-quality S-Video and the even higher-quality component video.
A mixing console or mixing desk is an electronic device for mixing audio signals, used in sound recording and reproduction and sound reinforcement systems. Inputs to the console include microphones, signals from electric or electronic instruments, or recorded sounds. Mixers may control analog or digital signals. The modified signals are summed to produce the combined output signals, which can then be broadcast, amplified through a sound reinforcement system or recorded.
The refresh rate, also known as vertical refresh rate or vertical scan rate in reference to terminology originating with the cathode-ray tubes (CRTs), is the number of times per second that a raster-based display device displays a new image. This is independent from frame rate, which describes how many images are stored or generated every second by the device driving the display. On CRT displays, higher refresh rates produce less flickering, thereby reducing eye strain. In other technologies such as liquid-crystal displays, the refresh rate affects only how often the image can potentially be updated.
The display resolution or display modes of a digital television, computer monitor or display device is the number of distinct pixels in each dimension that can be displayed. It can be an ambiguous term especially as the displayed resolution is controlled by different factors in cathode ray tube (CRT) displays, flat-panel displays and projection displays using fixed picture-element (pixel) arrays.
The Television Interface Adaptor (TIA) is the custom computer chip, along with a variant of the MOS Technology 6502 constituting the heart of the 1977 Atari Video Computer System game console. The TIA generates the screen display, sound effects, and reads the controllers. At the time the Atari VCS was designed, even small amounts of RAM were expensive. The chip was designed around not having a frame buffer, instead requiring detailed programming to create even a simple display.
A tuner is a subsystem that receives radio frequency (RF) transmissions, such as FM broadcasting, and converts the selected carrier frequency and its associated bandwidth into a fixed frequency that is suitable for further processing, usually because a lower frequency is used on the output. Broadcast FM/AM transmissions usually feed this intermediate frequency (IF) directly into a demodulator that converts the radio signal into audio-frequency signals that can be fed into an amplifier to drive a loudspeaker.
Music visualization or music visualisation, a feature found in electronic music visualizers and media player software, generates animated imagery based on a piece of music. The imagery is usually generated and rendered in real time and in a way synchronized with the music as it is played.
A video synthesizer is a device that electronically creates a video signal. A video synthesizer is able to generate a variety of visual material without camera input through the use of internal video pattern generators. It can also accept and "clean up and enhance" or "distort" live television camera imagery. The synthesizer creates a wide range of imagery through purely electronic manipulations. This imagery is visible within the output video signal when this signal is displayed. The output video signal can be viewed on a wide range of conventional video equipment, such as TV monitors, theater video projectors, computer displays, etc.
The XrossMediaBar is a graphical user interface developed by Sony Computer Entertainment. The interface features icons that are spread horizontally across the screen. Navigation moves the icons, instead of a cursor. These icons are used as categories to organize the options available to the user. When an icon is selected on the horizontal bar, several more appear vertically, above and below it. They, in turn, are selectable by the up and down directions on a directional pad.
Motorola Krzr, known as the "Canary" before its release, is a series of clamshell/flip mobile phones by Motorola, and was one of the series in the 4LTR line. It consisted of the K1 (2006) followed by the K3 (2007). As a clamshell/flip phone, the Krzr is longer but narrower than the Motorola Razr V3.
The Samsung SCH-U750, marketed as Samsung Alias 2 and also as Samsung Zeal, was a cell phone made by Samsung. The phone was only available in metallic gray. It features a dual-hinge design that can be opened in portrait or landscape style. The Alias 2 featured an E Ink-based keyboard. In horizontal mode it features a QWERTY keyboard and VCAST music on the Verizon Wireless network within Australia and the USA.
An oscilloscope is a type of electronic test instrument that graphically displays varying voltages of one or more signals as a function of time. Their main purpose is capturing information on electrical signals for debugging, analysis, or characterization. The displayed waveform can then be analyzed for properties such as amplitude, frequency, rise time, time interval, distortion, and others. Originally, calculation of these values required manually measuring the waveform against the scales built into the screen of the instrument. Modern digital instruments may calculate and display these properties directly.
Various accessories for the PlayStation 2 video game console have been produced by Sony, as well as third parties. These include controllers, audio and video input devices like microphones and video cameras, and cables for better sound and picture quality.
This glossary defines terms that are used in the document "Defining Video Quality Requirements: A Guide for Public Safety", developed by the Video Quality in Public Safety (VQIPS) Working Group. It contains terminology and explanations of concepts relevant to the video industry. The purpose of the glossary is to inform the reader of commonly used vocabulary terms in the video domain. This glossary was compiled from various industry sources.
The Atari joystick port is a computer port used to connect various gaming controllers to game console and home computer systems in the 1970s to the 1990s. It was originally introduced on the Atari 2600 in 1977 and then used on the Atari 400 and 800 in 1979. It went cross-platform with the VIC-20 in 1981, and was then used on many following machines from both companies, as well as a growing list of 3rd party machines like the MSX platform and various Sega consoles.