Body-on-frame

Last updated
A ladder frame Auromobile bare chassis frame.jpg
A ladder frame
A 2007 Toyota Tundra chassis holding the vehicle's engine, drivetrain, suspension and wheels. ToyotaTundraChassis.jpg
A 2007 Toyota Tundra chassis holding the vehicle's engine, drivetrain, suspension and wheels.
The BMW i3 electric car is one of the rare modern passenger cars with a separate body and frame design (2013). IAA 2013 BMW i3 (9833675545).jpg
The BMW i3 electric car is one of the rare modern passenger cars with a separate body and frame design (2013).

Body-on-frame, also known as ladder frame construction, is a common motor vehicle construction method, whereby a separate body or coach is mounted on a strong and relatively rigid vehicle frame or chassis that carries the powertrain (the engine and drivetrain) and to which the wheels and their suspension, brakes, and steering are mounted. While this was the original method of building automobiles, body-on-frame construction is now used mainly for pickup trucks, large SUVs, and heavy trucks.

Contents

In the late 19th century, the frames, like those of the carriages they replaced, might be made of wood (commonly ash), reinforced by steel flitch plates, but in the early 20th century, steel ladder frames or chassis rapidly became standard. Mass production of all-metal bodies began with the Budd Company and the Dodge Brothers. Mass production of all-metal bodies became general in the 1920s but Europe, with exceptions, followed almost a decade later. Europe's custom-made or "coachbuilt" cars usually contained some wood framing or used aluminium alloy castings. Towards the beginning of international automobile assembly and construction, most manufacturers created rolling chassis consisting of a powertrain, suspension, steering column and a fuel tank that was then sent to a coachbuilder that added the body, interior and upholstery to the customers specific requests.

In contrast, unibody or monocoque designs, where panels within the body supported the car on its suspension, were developed by European manufacturers in the late 1920s with Budd USA (which had a number of large factories in Europe) and its technical knowhow. Because of the high cost of designing and developing these structures and the high cost of specialised machinery to make the large pressings required by this style of construction it is not used by low-volume manufacturers, who might construct an equivalent by welding steel tube to form a suitable space frame.

History

A Model T chassis ready for its body Ford model t 1919 d044 lubrication chart.png
A Model T chassis ready for its body
All steel chassis and all steel body
Body by Edward G Budd Manufacturing Company of Philadelphia for John and Horace Dodge Dodge4Door1920.jpg
All steel chassis and all steel body
Body by Edward G Budd Manufacturing Company of Philadelphia for John and Horace Dodge

The Ford Model T carried the tradition of body-on-frame over from horse-drawn buggies, helping to facilitate high volume manufacturing on a moving assembly line. [2] In the United States, frequent changes in automotive design made it necessary to use a ladder frame rather than unibody construction to make it possible to change the design without having to change the chassis, allowing frequent changes and improvements to the car's bodywork and interior (where they were most noticeable to customers) while leaving the chassis and driveline unchanged, and thus keeping costs down and design times short. It was also easy to use the same chassis and driveline for several very different cars. Especially in the days before computer-aided design, this was an advantage. [3]

Most small passenger vehicles switched to unibody construction by the end of the 1930s. The trend had started with cars like the Citroën Traction Avant (1934) and Opel Olympia (a General Motors design) introduced in 1935, and the Chrysler Airflow. Trucks, bus manufacturers, and large low-volume cars or those made in the United States continued to use separate bodies on "conventional" frames. Body-on-frame remains the preferred construction method for heavy-duty commercial vehicles (especially those intended to carry or pull heavy loads, such as trucks and some sport utility vehicles (SUVs)) but as production volumes rise increasing numbers of SUVs and crossover SUVs are switching to unibody frames. Mass-market manufacturers Ford, General Motors, and Chrysler are abandoning true body-on-frame SUVs, opting, when sales volume permits, for more efficient unibody construction. [4] Toyota currently manufactures the most body-on-frame SUVs with the 4Runner, Sequoia, Land Cruiser, Lexus GX, and Lexus LX, followed by Nissan with the Patrol, Armada, and Infiniti QX56/80. [5]

Austin A40 Sports, ca 1951. Jensen Motors (of West Bromwich) built the aluminium-on-ash bodies under contract and transported them to Austin's Longbridge plant for final assembly. Austin A40 Roadster ca 1951.jpg
Austin A40 Sports, ca 1951. Jensen Motors (of West Bromwich) built the aluminium-on-ash bodies under contract and transported them to Austin's Longbridge plant for final assembly.

Examples

The following is a list of production cars, SUVs, and light-duty pickup trucks that have a body-on-frame construction. The list is divided by vehicle category.

Passenger cars

SUVs/wagons

Mini SUV

Mid-size SUV

Full-size SUV

Compact MPV

Mid-size MPV

Pickup trucks

Mid-size pickup truck

Full-size pickup truck

See also

Related Research Articles

<span class="mw-page-title-main">Minivan</span> Type of van designed for private use

Minivan is a car classification for vehicles designed to transport passengers in the rear seating row(s), with reconfigurable seats in two or three rows. The equivalent classification in Europe is MPV or M-segment.

<span class="mw-page-title-main">SUV</span> Type of automobile

A sport utility vehicle (SUV) is a car classification that combines elements of road-going passenger cars with features from off-road vehicles, such as raised ground clearance and four-wheel drive.

<span class="mw-page-title-main">Pickup truck</span> Light-duty truck with an enclosed cab and an open cargo area

A pickup truck or pickup is a light-duty truck that has an enclosed cabin, and a back end made up of a cargo bed that is enclosed by three low walls with no roof. In Australia and New Zealand, both pickups and coupé utilities are called utes, short for utility vehicle. In South Africa, people of all language groups use the term bakkie; a diminutive of Afrikaans: bak, meaning bowl or container.

<span class="mw-page-title-main">North American International Auto Show</span> Annual auto show in Detroit, Michigan

The North American International Auto Show (NAIAS), also known as the Detroit Auto Show, is an annual auto show held in Detroit, Michigan, U.S., at Huntington Place. The show was held in January from 1989 to 2019. It was intended to move to the summer in 2020, but was canceled due to the COVID-19 pandemic that year and 2021, before returning in September 2022. It is among the largest auto shows in North America. UPI says the show is "regarded as the foremost venue for [car] manufacturers to unveil new products".

<span class="mw-page-title-main">Isuzu</span> Japanese multinational automobile manufacturer

Isuzu Motors Ltd., commonly known as Isuzu, is a Japanese multinational automobile manufacturer headquartered in Yokohama, Kanagawa Prefecture. Its principal activity is the production, marketing and sale of Isuzu commercial vehicles and diesel engines.

<span class="mw-page-title-main">Rebadging</span> Changing badges of the same car

In the automotive industry, rebadging is a form of market segmentation used by automobile manufacturers around the world. To allow for product differentiation without designing or engineering a new model or brand, a manufacturer creates a distinct automobile by applying a new "badge" or trademark to an existing product line.

<span class="mw-page-title-main">Car platform</span> Similar design and engineering specs shared between multiple cars

A car platform is a shared set of common design, engineering, and production efforts, as well as major components, over a number of outwardly distinct models and even types of cars, often from different, but somewhat related, marques. It is practiced in the automotive industry to reduce the costs associated with the development of products by basing those products on a smaller number of platforms. This further allows companies to create distinct models from a design perspective on similar underpinnings. A car platform is not to be confused with a platform chassis, although such a chassis can be part of an automobile's design platform, as noted below.

Canadian Car of the Year winners, as chosen by the Automobile Journalists Association of Canada:

<span class="mw-page-title-main">Compact sport utility vehicle</span> Type of SUV sized between a mini SUV and a mid-size SUV

A compact sport utility vehicle or compact SUV is a class of small sport utility vehicles that is larger than mini SUVs, but smaller than mid-size SUVs. However, there is no official definition of the size or dimensions for this market segment. Moreover, some manufacturers have marketed the same model name on different sized vehicles over time. The most common distinction between versions of crossover automobiles and compact-sized SUVs is that the first is based on a car-based unibody platform, while an SUV uses the unibody with welded-in ladder frame or body-on-frame chassis commonly used on trucks. However, manufacturers and common usage has blurred the two terms. Many recent vehicles labelled as compact SUVs are technically compact crossovers and are built on the platform of a compact/C-segment passenger car, while some models may be based on a mid-size car (D-segment) or a B-segment platform.

<span class="mw-page-title-main">Chicago Auto Show</span> Annual US auto show

The Chicago Auto Show is held annually in February at Chicago's McCormick Place convention center. It is the largest auto show in North America.

<span class="mw-page-title-main">SEMA</span> Specialty Equipment Market Association

Specialty Equipment Market Association (SEMA) of the automobile aftermarket was formed in 1963 by Paul Schiefer, Roy Richter, Ed Iskenderian, Els Lohn, Willie Garner, Bob Hedman, Robert E. Wyman, John Bartlett, Phil Weiand Jr, Al Segal, Dean Moon, and Vic Edelbrock Jr. and now consists of 6,383 companies worldwide, bringing together aftermarket manufacturers, original equipment manufacturers (OEM), media, car dealers, specialty equipment distributors, installers, retailers, and restoration specialists.

<span class="mw-page-title-main">GMT360</span> Motor vehicle platform

GMT 360 is a vehicle platform that was manufactured by General Motors from the 2002 and 2009 model years. Designed primarily for SUVs, the GMT360 architecture served as the third generation of mid-size SUVs produced by GM. Directly succeeding its GMT330 predecessor in the United States, GMT360 vehicles based on the platform were sold with their predecessor in Canada and export markets through 2005.

<span class="mw-page-title-main">Vehicle frame</span> Main supporting structure of a motor vehicle

A vehicle frame, also historically known as its chassis, is the main supporting structure of a motor vehicle to which all other components are attached, comparable to the skeleton of an organism.

<span class="mw-page-title-main">Shinjin Motors</span> South Korean car and bus manufacturer

Shinjin Motors or Sinjin Motors is a defunct South Korean car manufacturer.

<span class="mw-page-title-main">Automotive industry in South Korea</span>

The automotive industry in South Korea is the fifth-largest in the world as measured by automobile unit production and also the sixth-largest by automobile export volume.

<i>Petersens 4-Wheel & Off-Road</i>

Petersen's 4-Wheel & Off-Road was an automobile magazine dedicated to 4x4 and off-road trucks and SUVs. The first issue was published in 1977; it began as a special-interest publication from the editors of Hot Rod magazine. 4-Wheel & Off-Road covered a range of topics for the do-it-yourself light-truck enthusiast, including real-world 4x4 performance modifications, new products and product evaluations, off-road event coverage, new-vehicle evaluations, travel, and lifestyle. In March 1978, the magazine officially became a monthly publication, and in 2013, 4-Wheel & Off-Road celebrated its 35th anniversary. It was published by the Motor Trend Group. On December 6, 2019, magazine-publishing industry news outlet Folio: reported the magazine was among 19 publications to be discontinued by Motor Trend Group by the end of 2019.

<span class="mw-page-title-main">Coupé utility</span> Automotive body style

A coupé utility is a vehicle with a passenger compartment at the front and an integrated cargo tray at the rear, with the front of the cargo bed doubling as the rear of the passenger compartment.

<span class="mw-page-title-main">Automotive industry in Thailand</span> Auto industry Thailand

As of 2019, the automotive industry in Thailand is the largest in Southeast Asia and the 10th largest in the world. The Thai industry has an annual output of more than two million vehicles, more than countries such as Belgium, Canada, the United Kingdom, Italy, Czech Republic and Turkey.

<span class="mw-page-title-main">Automotive industry in the Philippines</span> Overview of the automotive industry in the Philippines

The automotive industry in the Philippines is one of the largest in the Asia-Pacific region, with approximately 441.4 thousand vehicles sold in 2023. Most of the vehicles sold and built in the Philippines are from foreign brands. For the most part, the Philippines is dominated by Japanese automobile manufacturers like most of its ASEAN neighbors. The automobile production in the country is covered under the Philippine Motor Vehicle Development Program implemented by the Board of Investments. In addition, there are also a small number of independent firms who assemble and fabricate jeepneys and other similar vehicles, using surplus engines and drivetrain parts mostly from Japan.

References

  1. page 106, George A Oliver, A History of Coachbuilding, Cassell, London, 1962
  2. Great Moments in Body-on-Frame Car Construction WSJ, May 2, 2014
  3. Sawyer, Christopher A. (2009-06-02). "Framing the question | Automotive Design & Production | Find Articles at BNET". Findarticles.com. Archived from the original on 2009-02-11. Retrieved 2009-12-08.
  4. "Car Reviews, New and Used Car Prices, Photos and Videos - MSN Autos". editorial.autos.msn.com. Archived from the original on 6 January 2014. Retrieved 10 April 2018.
  5. "Toyota reaffirms commitment to body-on-frame SUVs". autoblog.com. Retrieved 10 April 2018.
  6. "Austin A40 Sports". Austin Memories. Archived from the original on 2009-01-05.
  7. "BMW i3 aluminum chassis frame: Drive Module characteristics - MarkLines Automotive Industry Portal".