Craigie Flour Mill Historical Marker

Last updated
Craigie Flour Mill Historical Marker
Craigie Flour Mill Marker.jpg
USA Minnesota location map.svg
Red pog.svg
Usa edcp location map.svg
Red pog.svg
Nearest city Otter Tail Township, Minnesota
Coordinates 46°22′25″N95°39′5″W / 46.37361°N 95.65139°W / 46.37361; -95.65139 Coordinates: 46°22′25″N95°39′5″W / 46.37361°N 95.65139°W / 46.37361; -95.65139
Arealess than one acre
Built1940 (1940)
Architect Arthur R. Nichols; et al.
Architectural styleNPS Rustic
MPS Federal Relief Construction in Minnesota MPS AD
NRHP reference No. 02001704 [1]
Added to NRHPJanuary 16, 2003

The Craigie Flour Mill Historical Marker is a wayside rest on Minnesota State Highway 78 in Otter Tail County, Minnesota. The site was designed by landscape architect Arthur R. Nichols and built by the National Youth Administration and the Minnesota Highway Department. The style is National Park Service Rustic architecture. [2] :6

The plaque on the site reads:

Craigie Flour Mill. Near this spot James Craigie of Aberdeen, Scotland, who came to Otter Tail County about 1868 built the first grist mill in the county in 1870. The mill stones and wheel were imported from Scotland. Craigie and his wife were drowned in Otter Tail Lake in 1872 and after long litigation the mill was torn down. [2] :8

This text was originally printed on a steel sign, measuring 3 feet by 5 feet, which was erected by the Otter Tail County Historical Society and dedicated at a meeting on June 25, 1939 that attracted more than 2000 people. The steel plaque was replaced the following year with the more permanent wayside rest and monument. [2] :11

The wayside rest is typical of the designs built by the Minnesota Highway Department around that time, with a curved drive that pulls off the main highway and a monument at the middle of the drive. The millstones and the iron water wheel are incorporated into the monument, though, which are an unusual feature for the historical markers designed by Nichols. The Fergus Falls Daily Journal reported that a Mr. Mathews had pulled the millstones from the nearby Balmoral Creek. [2] :11–12

Related Research Articles

Peirce Mill United States historic place

The Peirce Mill is a historic mill building located in Rock Creek Park, at Tilden Street and Beach Drive, Northwest, Washington, D.C., United States.

St. Croix Boom Site United States historic place

The St. Croix Boom Site is a historic and scenic wayside on the St. Croix River in Stillwater Township, Minnesota, United States. It commemorates the location of a critical log boom where, from 1856 to 1914, timber from upriver was sorted and stored before being dispatched to sawmills downstream. The site was developed as a roadside park along Minnesota State Highway 95 in the 1930s. In 1966 it was designated a National Historic Landmark for its national significance in the theme of industry. It was nominated for being the earliest, most important, and longest serving of the log storage and handling operations that supported Minnesota's major logging industry. Virtually no traces remain of the site's original buildings and structures.

Phelps Mill United States historic place

Phelps Mill is a flour mill in Otter Tail County, Minnesota, United States, on the Otter Tail River. The mill was built in 1888–1889 by William E. Thomas, a local entrepreneur who owned a flour and feed business in Fergus Falls. During that time, wheat was a high-demand crop, and nearly one thousand flour mills were in operation throughout Minnesota. Thomas began constructing a wooden dam on the river in the spring of 1888, although the dam was prone to leakage and had to be shored up with sandbags, dirt, gravel, and other materials. The mill itself was built by Royal Powers, who built and framed the mill without using blueprints. He was able to keep the entire plan within his head and did not even have to mark out the lumber he was cutting.

Schechs Mill United States historic place

Schech's Mill is a historic mill in Houston County, Minnesota, United States. It is one of three watermills in Minnesota still operating solely with water power and the only one to have its original millstones. Built by John Blinn in 1876, it was purchased by a Minneapolis miller, Michael Schech who had emigrated from Bavaria, Germany. The mill produced cornmeal, rye buckwheat, wheat flour, graham flour, and whole wheat cereal, which was sold in Caledonia and Houston, Minnesota. Schech's Mill is unique in the state for retaining intact and operable machinery from the 1870s, after the middlings purifier had been introduced but before millstones were supplanted by roller mills. In 1922, a concrete dam was built to replace the original wooden one.

Glossary of mill machinery Wikipedia glossary

This glossary of mill machinery covers the major pieces of machinery to be found in windmills, watermills and horse mills. It does not cover machinery found in modern factories.

Windmill Hill Mill, Herstmonceux

Windmill Hill Mill is a grade II* listed post mill at Herstmonceux, Sussex, England which has been restored and now operates as a working mill. The mill is open to the public on most Sundays from Easter until October.

Ramsey Windmill, Essex

Ramsey Windmill is a grade II* listed post mill at Ramsey, Essex, England which has been restored.

Websters Mill, Framsden

Framsden Windmill is a Grade II* listed post mill at Framsden, Suffolk, England which is preserved. The mill was known as Webster's Mill when it was a working mill.

National Register of Historic Places listings in Otter Tail County, Minnesota

This is a list of the National Register of Historic Places listings in Otter Tail County, Minnesota. It is intended to be a complete list of the properties and districts on the National Register of Historic Places in Otter Tail County, Minnesota, United States. The locations of National Register properties and districts for which the latitude and longitude coordinates are included below, may be seen in an online map.

Garboldisham Windmill

Garboldisham Mill is a Grade II* listed post mill at Garboldisham, Norfolk, that has been restored.

Newlin Mill Complex United States historic place

The Newlin Mill Complex, also referred to as The Newlin Grist Mill, is a water-powered gristmill on the west branch of Chester Creek near Concordville, Pennsylvania was built in 1704 by Nathaniel and Mary Newlin and operated commercially until 1941. During its three centuries of operation, the mill has been known as the Lower Mill, the Markham Mill, the Seventeen-O-Four Mill and the Concord Flour Mill. In 1958 the mill property was bought by E. Mortimer Newlin, restored and given to the Nicholas Newlin Foundation to use as a historical park. Water power is still used to grind corn meal which is sold on site. The park includes five historical buildings, which were added to the National Register of Historic Places in 1983, and 150 acres (61 ha) of natural woodland.

Stillwater Overlook United States historic place

The Stillwater Overlook is a scenic overlook in Oak Park Heights, Minnesota, United States, just south of the city limits of Stillwater, near the junction of Minnesota State Highway 36 and Minnesota State Highway 95. The overlook was listed on the National Register of Historic Places in 2007 for having state-level significance in politics/government and landscape architecture. It was nominated as a leading example of the early wayside rests developed by the Minnesota Department of Highways Roadside Development Division, as well as for its sophisticated and well-preserved National Park Service rustic architecture, and for being an important work of Minnesota landscape architect Arthur R. Nichols.

Podlipoglav Place in Lower Carniola, Slovenia

Podlipoglav is a village in the City Municipality of Ljubljana in central Slovenia. The area is part of the traditional region of Lower Carniola and is now included with the rest of the municipality in the Central Slovenia Statistical Region.

Seppman Mill United States historic place

The Seppman Mill is a former windmill in Blue Earth County, Minnesota, United States, now preserved in Minneopa State Park. It was built by Louis Seppmann, a German immigrant, between 1862 and 1864 and is now on the National Register of Historic Places. The sails and internal machinery have been removed.

Gristmill Mill; grinds grain into flour

A gristmill grinds cereal grain into flour and middlings. The term can refer to either the grinding mechanism or the building that holds it. Grist is grain that has been separated from its chaff in preparation for grinding.

Arthur R. Nichols was a landscape architect who practiced in New York City and Minnesota in a long career from 1902 through 1960. He was a very productive landscape architect who was instrumental in bringing the field of landscape architecture to Minnesota.

Garrison Concourse United States historic place

The Garrison Concourse is a roadside park on Mille Lacs Lake in Garrison, Minnesota, United States. The site consists of a wide parking area and scenic overlook projecting out into the lake, plus landscaped parkland along the shore in both directions. It was built from 1936 to 1939 as the centerpiece of the Mille Lacs Highway Development Plan, a major New Deal project to create a scenic parkway along the lakeshore. The park was listed on the National Register of Historic Places in 2013 for having state-level significance in the themes of landscape architecture and politics/government. It was nominated for being the premiere structure of the most extensive roadside development project undertaken by the Minnesota Highway Department and the Civilian Conservation Corps, and for its blend of formalism and National Park Service rustic design.

Reads Landing Overlook United States historic place

The Reads Landing Overlook is a scenic overlook on U.S. Route 61 in Pepin Township, Minnesota, United States. It was built from 1939 to 1940 as a New Deal project to provide motorists with a scenic view of Lake Pepin. It was designed by landscape architect Arthur R. Nichols and constructed by the National Youth Administration. The overlook was listed on the National Register of Historic Places in 2004 for its state-level significance in the themes of landscape architecture and politics/government. It was nominated for exemplifying the early highway waysides built in Minnesota with federal work relief aid, and for exemplifying as well National Park Service rustic style and the work of Nichols.

Red River Milling Company United States historic place

Red River Milling Company is a historic building and structures in Fergus Falls, Minnesota, United States. The city's first mill was built at this location on the north side of the Otter Tail River in 1872. The location was a good one for water power as the river drops in elevation 85 feet (26 m) within Fergus Falls and 150 feet (46 m) from just east to just west of the city. The mill expanded over time as frame buildings were constructed on the site. They were destroyed in a fire of unknown origins on March 10, 1915.

Lake Blanche (Minnesota)

Lake Blanche is a 2.02-square-mile (5.2 km2) lake in the west-central part of the U.S. state of Minnesota, straddling Everts and Girard townships in Otter Tail County.

References

  1. "National Register Information System". National Register of Historic Places . National Park Service. July 9, 2010.
  2. 1 2 3 4 "National Register of Historic Places Nomination Form: Craigie Flour Mill Historical Marker" (PDF). December 2, 2002. Retrieved 2013-03-27.