Infrastructure asset management is the integrated, multidisciplinary set of strategies in sustaining public infrastructure assets such as water treatment facilities, sewer lines, roads, utility grids, bridges, and railways. Generally, the process focuses on the later stages of a facility's life cycle, specifically maintenance, rehabilitation, and replacement. Asset management specifically uses software tools to organize and implement these strategies with the fundamental goal to preserve and extend the service life of long-term infrastructure assets which are vital underlying components in maintaining the quality of life in society and efficiency in the economy.[1] In the 21st century, climate change adaptation has become an important part of infrastructure asset management competence.[2][3]
Infrastructure asset management is a specific term of asset management focusing on physical, rather than financial assets. Sometimes the term infrastructure management is used to mean the same thing, most notably in the title of The International Infrastructure Management Manual (2000, 6th edition). Where there is no problem of confusion, the term asset management is more widely used, as in the professional societies: the Asset Management Council in Australia and the Institute of Asset Management in the UK. In this context, infrastructure is a wide term denoting road and rail, water, power, etc. assets. Road asset management is part of infrastructure asset management including all the physical assets on the road network such as roads, bridges, culverts, and road furniture.
The first published use of the term asset management to refer to physical assets is not known for sure. The earliest adopter known for certain is Dr Penny Burns in 1984 (see the Asset Management History Project AMQI's STRATEGIC ASSET MANAGEMENT – Public infrastructure). The National Asset Management Manual was published in Australia in October 1994 by the Institute of Municipal Engineering Australia (now IPWEA). The NAMM and the New Zealand Infrastructure Asset Management Manual published in 1996 are an early use of the specific term infrastructure asset management Home - NAMS NZ. The NAMM and IAMM were combined into the International Infrastructure Management Manual (IIMM) published in 2000. The term "asset management" was first used in a document published in 1983 by the United States Department of Transportation, Federal Highway Administration entitled: Transportation Resource Management Strategies for Elected Officials of Rural Municipalities and Counties. That document consisted of seven chapters of resource management strategies for each of two types of transportation infrastructure - roads & bridges and public transportation. Each of these two parts of the document focused on the following seven categories: Planning, Prioritization, Contracting Out, Innovative Finance, Human Resource Management, Asset Management and Performance Measurement & Reporting.
Current situation
Australia
Most local governments in Australia are required to develop an asset management plan for major asset classes and align the forecast outlays with a long tern financial plan to ensure the needed services from infrastructure are provided in an affordable and sustainable manner. Guidelines for alignment financial and non-financial aspects of asset management are available in the Australian Infrastructure Financial Management Manual published in 2009 and updated in 2015 and International Infrastructure Financial Management Manual, 2020.
United States
After decades of capital investment in United States's infrastructure such as the Interstate Highway System, local water treatment facilities, electric transmission and utility lines, the need to sustain such infrastructure experiences mounting challenges. The current duress includes tight state and local budgets, deferral of needed maintenance funding, and political pressures to cut public spending.[1] Today, shrinking federal appropriations, progressively aging capital stock, and parochial statuses and interest groups have inhibited flexible procurement strategies. And with the rise of design firms, professional societies, licensures, construction and industry associations, and related specialties the management of the infrastructure system has dramatically altered. As a result, the life cycle of a facility, including planning, design, construction, operations, maintenance, upgrading, and replacement has become bifurcated between agencies and firms where design and construction becomes contracted separately from operations and maintenance. The push for more dual-track strategies and not segmented ones such as Design-Build and Build-Operate-Transfer helps in maintaining public facilities.[4] Yet, over time, the government apparatus focused more on start-up capital expenses for constructing public assets without focused monies on maintenance.[5][pageneeded]
After World WarII, with the policies of the Roosevelt Administration, economic boom of the 1950s, and rise in Federalism, public projects became financed through direct government funding. Additionally, the federal government began setting criteria and procedures for architects and engineers to comply on federal construction and related projects. State and local statutes soon followed suit. Over the years, a large bureaucratic machine began administering infrastructure projects through Design-Bid-Build and debt financing methods. This led to hyper-competition of federal, states, and localities over scant federal resources and overall fostered a limited approach in life-cycle attention (namely, no account of operation and maintenance).[4] Asset management attempts to fill in the gaps of such fragmentation for better performance in infrastructure assets.[6]
Canada
In Canada, the majority of municipal assets were built between 1960s to 1970s. The average age of municipal infrastructure has increased since the end of the late 1970s, because investment has been insufficient to replace deteriorating assets.[7][8] This deficit could be the result a shift in financing policy at the end of 1970s, which made the local governments responsible to fund the municipal assets.[8] Recently, in Ontario municipalities are required to develop an asset management plan to receive provincial fund.[7]
Processes and activities
The basic premise of infrastructure asset management is to intervene at strategic points in an asset's normal life cycle to extend the expected service life, and thereby maintain its performance. Typically, a long-life-cycle asset requires multiple intervention points including a combination of repair and maintenance activities and even overall rehabilitation. Costs decrease with planned maintenance rather than unplanned maintenance. Yet, excessive planned maintenance increases costs. Thus, a balance between the two must be recognized. While each improvement raises an asset's condition curve, each rehabilitation resets an asset's condition curve, and complete replacement returns condition curve to new level or upgraded level. Therefore, strategically timing these interventions will aid in extending an asset's life cycle. A simple working definition of asset management would be: first, assess what you have; then, assess what condition it is in; and lastly, assess the financial burden to maintain it at a targeted condition.[1]
Essential processes and activities for infrastructure asset management include the following:[2]
Maintaining a systematic record of individual assets (an inventory)—e.g., acquisition cost, original service life, remaining useful life, physical condition, repair and maintenance consistency
Developing a defined program for sustaining the aggregate body of assets through deterioration modeling, planned maintenance, repair, and replacement[6][9]
Defining current and expected levels of service and linking them to maintenance and capital planning[3][7]
Calculating life-cycle cost of assets and possible sources of finance for maintenance actions
These processes and activities are interrelated and interdependent aspects that usually cross organizational boundaries including finance, engineering, and operations.[1] Hence, asset management is a comprehensive approach in handling an immense portfolio of public and private capital stock. As example, in 2009, the IBM Maximo software was adopted to manage the maintenance of rolling stock and facilities for three railway systems: the Long Island Rail Road, San Francisco BART system, Washington metrorail.[10] Also, recently, wireless sensors, totaling 663, have been installed on South Korea's Jindo Bridge to detect structural cracks and corrosion. Though in a testing phase among three universities in South Korea, United States, and Japan, the use of wireless technology to may lend itself to future, cost-efficient asset management.[11]
In 2014 ISO published an international management system standard for asset management.[12] The ISO 55000 series provides terminology, requirements and guidance for implementing, maintaining and improving an effective asset management system.
Work practices
Politically, many legal and governmental initiatives have emphasized proactive asset management given the current state of an aging infrastructure and fiscal challenges. Recent developments include the Governmental Accounting Standards Board Statement No. 34 that required state and local entities to report in their accounting all infrastructure assets not only the privately financed ones such as water supply and utilities paid by user fees. This helps to determine an agency's overall infrastructure asset inventory, timely assessment of physical condition, and annual projection of financial requirements. Additionally, the United States Environmental Protection Agency’s Capacity, Management, Operation, and Maintenance (CMOM) initiative works to move away from the compliance-mandate enforcement to proactive partnership with public managers to self-audit their infrastructure systems in assessing capacity, management, and operations/maintenance.
Still other proponents for proactive management include judicial consent decrees for facility managers to resolve noncompliance with environmental standards set by EPA or state environmental protection departments (i.e., laws against sewer overflows); post-9/11 security vulnerability analyses; funding legislation that specifies asset management as qualifying condition to receive/keep award; and professional organizations that are moving the industry to asset management through education, research, and workshops.[1]
Despite the current challenges of the time's financial constraints, one advantage is the growing availability of methodology and technology to employ asset management. But while municipalities have made significant investments and use of software tools in the last 20 years, they are mostly stand-alone systems with limited to no capability for sharing or exchanging information with other tools. Consequently, they operate in isolated silos of information across municipal departments. Data has to be re-interpreted, transformed, and reentered into different software tools several times leading to time-consuming, prone-to-error inefficiencies. Many in academia and industry recognize the need for integrated, multidisciplinary asset management that involves:[13]
Systemization and coordination of work processes
Development of centralized share data repositories
Organization of distributed software tools into modular, extensive-wide software environments
United Nations Infrastructure Asset Management approach
The United Nations Department of Economic and Social Affairs (UN DESA), United Nations Capital Development Fund (UNCDF), and United Nations Office for Project Services (UNOPS) are currently working together to encourage governments world-wide to adopt a more systemic and proactive approach in the management of their infrastructure assets. Highlighting that more than 90 per cent of the Sustainable Development Goals and their targets hinge upon sound infrastructure asset management, their initiatives seek, among other things, to ensure the accessibility, resilience and sustainability of infrastructure assets, to strengthen public management confidence among the population and to attract new investments.
To meet these challenges, the UN published Managing Infrastructure Assets for Sustainable Development: A handbook for local and national governments. The Handbook offers a flexible step-by-step diagnostic methodology with advice, exercises and examples easily accessible to practitioners and decision-makers in local and central governments. Focused on anticipating risks and facing the challenges of the future, the guide applies to traditional infrastructure (roads, water distribution networks, sanitation, buildings for essential services, etc.), publicly owned land and to equipment operation and maintenance. Some chapters also offer a situational assessment of climate risks and resource mobilization for a more effective response to public health emergencies.
The UN also created a Massive Open Online Course (MOOC) on Infrastructure Asset Management for Sustainable Development, which provides in-depth instruction and complements knowledge acquired from the Handbook. This course is freely accessible.
IIAM approach
The Institute of Infrastructure Asset Management (IIAM), a U.S.-based transportation consultancy, works to promote the same issues and collaborates with other organizations, such as in the INFRAASSETS2010 conference in Malaysia, in management of public assets.
The IIAM approach to infrastructure asset management is based upon the definition of a Standard of Service (SoS) that describes how an asset will perform in objective and measurable terms. The SoS includes the definition of a "minimum condition grade", which is established by considering the consequences of a failure of the infrastructure asset.
The key components of "Infrastructure Asset Management" are:
Public asset management expands the definition of Enterprise Asset Management (EAM) by incorporating the management of all things which are of value to a municipal jurisdiction and its citizen's expectations. Public Asset Management is the term that considers the importance that public assets affect other public assets and work activities which are important sources of revenue for municipal governments and has various points of citizen interaction. The versatility and functionality of a GIS system allow for the control and management of all assets and land-focused activities. All public assets are interconnected and share proximity, and this connectivity is possible through the use of GIS. GIS-centric public asset management standardizes data and allows interoperability, providing users the capability to reuse, coordinate, and share information in an efficient and effective manner.
Among the GISs in use for infrastructure management in the USA are GE Smallworld and ESRI. An ESRI GIS platform combined with the overall public asset management umbrella of both physical hard assets and soft assets helps remove the traditional silos of structured municipal functions which serves the citizens. While the hard assets are the typical physical assets or infrastructure assets, the soft assets of a municipality includes permits, license, code enforcement, right-of-ways and other land-focused work activities.
Capacity building
An executive education program in infrastructure asset management (Certificate of Advanced Studies Managing Infrastructure Assets, CASMIA, 16ECTS) has been developed since 2012, launched in 2014 and funded by Swiss federal Agency of Energy (SFOE). It is the only individual and organizational learning program worldwide that operates by changing university institute hosts. This ensures that the emerging MIA profession can cope with cross-disciplinary content critically and universities review curriculum. Former university institutes include ETH Zurich (IBI) and University of St. Gallen (HSG-ACA). This program also ensures the highest possible accreditation for an emerging profession, since individuals in this field still outperform institutions in terms of quality of content.
1 2 Pietroforte, R. and Miller, J. B. (2002). "Procurement Methods for U.S. Infrastructure: Historical Perspective". Journal of Research, Development, and Demonstration. Pp. 425-434.
1 2 Piryonesi, S. M.; El-Diraby, T. E. (2020) [Published online: December 21, 2019]. "Data Analytics in Asset Management: Cost-Effective Prediction of the Pavement Condition Index". Journal of Infrastructure Systems. 26 (1). doi:10.1061/(ASCE)IS.1943-555X.0000512.
↑ Halfawy, M. (2008). "Integration of Municipal Infrastructure Assets Management Processes". Journal of Computing in Civil Engineering, vol. 22, no. 6.
European Federation of National Maintenance Societies (EFNMS): EFNMS
Institute for Infrastructure Asset Management (IIAM):
International Organization for Standardization (ISO) Asset Management Technical Committee: About
Related Research Articles
Configuration management (CM) is a process for establishing and maintaining consistency of a product's performance, functional, and physical attributes with its requirements, design, and operational information throughout its life. The CM process is widely used by military engineering organizations to manage changes throughout the system lifecycle of complex systems, such as weapon systems, military vehicles, and information systems. Outside the military, the CM process is also used with IT service management as defined by ITIL, and with other domain models in the civil engineering and other industrial engineering segments such as roads, bridges, canals, dams, and buildings.
Infrastructure is the set of facilities and systems that serve a country, city, or other area, and encompasses the services and facilities necessary for its economy, households and firms to function. Infrastructure is composed of public and private physical structures such as roads, railways, bridges, tunnels, water supply, sewers, electrical grids, and telecommunications. In general, infrastructure has been defined as "the physical components of interrelated systems providing commodities and services essential to enable, sustain, or enhance societal living conditions" and maintain the surrounding environment.
Facility management or facilities management (FM) is a professional management discipline focused on the efficient and effective delivery of logistics and other support services related to real property and buildings. It encompasses multiple disciplines to ensure functionality, comfort, safety and efficiency of the built environment by integrating people, place, process and technology, as defined by the International Organization for Standardization (ISO). The profession is certified through Global Facility Management Association member organizations.
Total cost of ownership (TCO) is a financial estimate intended to help buyers and owners determine the direct and indirect costs of a product or service. It is a management accounting concept that can be used in full cost accounting or even ecological economics where it includes social costs.
ISO/IEC/IEEE 12207Systems and software engineering – Software life cycle processes is an international standard for software lifecycle processes. First introduced in 1995, it aims to be a primary standard that defines all the processes required for developing and maintaining software systems, including the outcomes and/or activities of each process.
Public infrastructure is infrastructure owned or available for use by the public. It is distinguishable from generic or private infrastructure in terms of policy, financing, purpose, etc.
Building information modeling (BIM) is a process supported by various tools, technologies and contracts involving the generation and management of digital representations of physical and functional characteristics of places. Building information models (BIMs) are computer files which can be extracted, exchanged or networked to support decision-making regarding a built asset. BIM software is used by individuals, businesses and government agencies who plan, design, construct, operate and maintain buildings and diverse physical infrastructures, such as water, refuse, electricity, gas, communication utilities, roads, railways, bridges, ports and tunnels.
A road is a thoroughfare, route, or way on land between two places that has been surfaced or otherwise improved to allow travel by foot or some form of conveyance, including a motor vehicle, cart, bicycle, or horse. Roads have been adapted to a large range of structures and types in order to achieve a common goal of transportation under a large and wide range of conditions. The specific purpose, mode of transport, material and location of a road determine the characteristics it must have in order to maximize its usefulness. Following is one classification scheme.
Asset management is a systematic approach to the governance and realization of all value for which a group or entity is responsible, over its whole life cycle. It may apply both to tangible assets and to intangible assets. Asset management is a systematic process of developing, operating, maintaining, upgrading, and disposing of assets in the most cost-effective manner.
Pavement management is the process of planning the maintenance and repair of a network of roadways or other paved facilities in order to optimize pavement conditions over the entire network.
An asset management plan (AMP) is a tactical plan for managing an organisation's infrastructure and other assets to deliver an agreed standard of service. Typically, an asset management plan will cover more than a single asset, taking a system approach - especially where a number of assets are co-dependent and are required to work together to deliver an agreed standard of service.
Whole-life cost is the total cost of ownership over the life of an asset. The concept is also known as life-cycle cost (LCC) or lifetime cost, and is commonly referred to as "cradle to grave" or "womb to tomb" costs. Costs considered include the financial cost which is relatively simple to calculate and also the environmental and social costs which are more difficult to quantify and assign numerical values. Typical areas of expenditure which are included in calculating the whole-life cost include planning, design, construction and acquisition, operations, maintenance, renewal and rehabilitation, depreciation and cost of finance and replacement or disposal.
ISO 55000 is an international standard covering management of assets of any kind. Before it, a Publicly Available Specification was published by the British Standards Institution in 2004 for physical assets. The ISO 55000 series of Asset Management standards was launched in January 2014.
Facility condition assessment is an analysis of the condition of a facility in terms of age, design, construction methods, and materials. The individuals who perform the assessment are typically architects and engineers, and skilled-trade technicians. Engineering and architectural professional opinions as to the conditions observed are part of the assessment. Building diagnostics go beyond facility condition assessments to determine solutions to the problems found and predict outcomes of the solutions.
Infrastructure is a platform for governance, commerce, and economic growth and is "a lifeline for modern societies". It is the hallmark of economic development.
Triple bottom line cost-benefit analysis (TBL-CBA) is an evidence-based economic method that combines cost–benefit analysis (CBA) and life-cycle cost analysis (LCCA) across the triple bottom line (TBL) to weigh costs and benefits to project stakeholders. The TBL-CBA process quantifies total net present value, return on investment, and project payback. TBL-CBA uses location-specific data to give asset owners and design professionals the flexibility and capability to provide a rigorous analysis of investment alternatives through all stages of planning and design.
Pavement performance modeling or pavement deterioration modeling is the study of pavement deterioration throughout its life-cycle. The health of pavement is assessed using different performance indicators. Some of the most well-known performance indicators are Pavement Condition Index (PCI), International Roughness Index (IRI) and Present Serviceability Index (PSI), but sometimes a single distress such as rutting or the extent of crack is used. Among the most frequently used methods for pavement performance modeling are mechanistic models, mechanistic-empirical models, survival curves and Markov models. Recently, machine learning algorithms have been used for this purpose as well. Most studies on pavement performance modeling are based on IRI.
Deterioration modeling is the process of modeling and predicting the physical conditions of equipment, structures, infrastructure or any other physical assets. The condition of infrastructure is represented either using a deterministic index or the probability of failure. Examples of such performance measures are pavement condition index for roads or bridge condition index for bridges. For probabilistic measures, which are the focus of reliability theory, probability of failure or reliability index are used. Deterioration models are instrumental to infrastructure asset management and are the basis for maintenance and rehabilitation decision-making. The condition of all physical infrastructure degrade over time. A deterioration model can help decision-makers to understand how fast the condition drops or violates a certain threshold.
Levels of service (LOS) is a term in asset management referring to the quality of a given service. Defining and measuring levels of service is a key activity in developing infrastructure asset management plans. Levels of service may be tied to physical performance of assets or be defined via customer expectation and satisfaction. The latter is more service-centric rather than asset-centric. For instance, when measuring the LOS of a road, it could be measured by a physical performance indicator such as Pavement Condition Index (PCI) or by a measure related to customer satisfaction such as the number of complaints per month about that certain road section. Or in the case of traffic level of service, it could be measured by the geometry of road or by travel time of the vehicles, which reflects the quality of traffic flow. So, levels of service can have multiple facets: customer satisfaction, environmental requirements and legal requirements.
Granular base equivalency or granular base equivalence (GBE) is a measure of total pavement thickness. Since pavement is composed of multiple layers with different physical properties, its total thickness is measured by GBE. GBE translates the thickness of different road layers to a number using a set of coefficients. So, to calculate the GBE, the depth of each layer should be multiplied by the granular equivalency factor for the material in that layer. In the next step the sum of the converted layer thicknesses is calculated. This sum is called granular base equivalency, which is a popular and important measure in pavement design and pavement performance modeling.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
