Mission type | Mars lander |
---|---|
Operator | NASA |
Mission duration | One Martian year (22 months) on the surface. |
Spacecraft properties | |
Launch mass | 1,092 kg (2,407 lb) Lander: 500 kg (1,100 lb) |
Power | Solar array for 150 W, Lander: ASRG for 133 W |
Mars lander | |
Landing site | South pole of Mars |
The Mars Geyser Hopper (MGH) was proposed in 2012 as a NASA design reference mission for a Discovery-class spacecraft concept that would investigate the springtime carbon dioxide Martian geysers found in regions around the south pole of Mars. [1] [2]
The power technology that MGH proposed to use was the Advanced Stirling radioisotope generator (ASRG). [3] NASA finished the ASRG design and made one test unit of the device but the program was concluded by the mid-2010s. [4] [5] Neither InSight nor any of the next Discovery's semi-finalists use the ASRG or an RTG due to high demand and limited supply of the type of plutonium it relies on. [6]
The Discovery program was started in the 1990s following discussions at NASA for a new program, and has achieved such missions as Genesis, Deep Impact and Kepler among others; this is the program this mission was designed for selection in, at least initially. [7]
One of the first unmanned robotic spacecraft to do a hop was Surveyor 6 lunar lander, which successfully soft landed on the Moon 1967 and conducted a post-landing hop. [3] Another possibly for a hopper mission may be Saturn's moon Enceladus . [8] Hoppers are noted for their ability to potentially visit different landing sites. [8] Another hopper-type mission was the Comet Hopper, which won a Discovery semi-finalist award to study a hopping mission to the Comet 46P/Wirtanen. [9]
There was some speculation in 2012 that the Geyser Hopper mission could be flown after the InSight Mars lander. [10]
The mission was projected to cost US$350 million and to meet a cost cap of no more than US$425 million, not including the launch cost. In order to reduce the cost and minimize risk, the spacecraft concept is based on a previous spacecraft design, the Mars Phoenix lander, which has a demonstrated flight heritage that incorporates soft landing capability and incorporates a restartable rocket propulsion system, suitable to be repurposed for this mission requirements. [2]
The spacecraft would land at a target landing area near the south pole of Mars, where geysers exist over a stretch of several hundred kilometers with densities of at least one geyser every 1 to 2 kilometres (0.62 to 1.24 mi) and have the ability to "hop" at least twice from its landed location after a summertime landing to reposition itself close to a geyser site, and wait through the winter until the first sunlight of spring to witness first-hand the Martian geyser phenomenon and investigate the debris pattern and channel. [2]
Martian geysers are unlike any terrestrial geological phenomenon. The shapes and unusual spider appearance of these features have stimulated a variety of scientific hypotheses about their origin, ranging from differences in frosting reflectance, to explanations involving biological processes. However, all current geophysical models assume some sort of geyser-like activity. [11] [12] [13] [14] [15] [16] [17] [18] [19] Their characteristics and formation process are still a matter of debate.
The seasonal frosting and defrosting of CO2 ice results in the appearance of a number of features, such dark dune spots with spider-like rilles or channels below the ice, [12] where spider-like radial channels are carved between the ground and ice, giving it an appearance of spider webs, then, pressure accumulating in their interior ejects gas and dark basaltic sand or dust, which is deposited on the ice surface and thus, forming dark dune spots. [11] [12] [13] [14] [15] [16] [17] This process is rapid, observed happening in the space of a few days, weeks or months, a growth rate rather unusual in geology – especially for Mars. [20]
The primary mission duration, starting from launch, is 30 months, comprising 8 months of interplanetary cruise followed by a primary mission of 22 months (one Mars year) on the surface. The spacecraft will enter the atmosphere, and make a rocket-powered soft landing in a region of the south pole where geysers are known to form. This landing will take place during the polar summer, when the surface is free of ice. The predicted landing ellipse is 20 by 50 kilometres (12 mi × 31 mi) and hence the landing will be targeted to a region, and not to a specific geyser location. During the first post-landing phase, it will conduct science operations to characterize the landing site, to understand the surface geology of the area during the ice-free summer period. [1]
The spacecraft will then stow its science instruments and re-ignite the engines for a first hop of a distance of up to 2 kilometers (1.2 mi). [2] This hop is designed to place the lander in a location where it can directly probe the geyser region, examining the surface at a spot where a geyser had been.
Once again, the spacecraft will stow its instruments and activate the engines for a second hop, a distance of ~100 meters (330 ft). This hop will place the lander onto the winter-over site, a spot chosen to be a relatively high elevation where the lander can get a good view of the surroundings, close to but not located on the site of a known geyser, and outside the fall-out pattern of the expected debris plume. The spacecraft will characterize the local area during the remaining sunlight, and then go into "winter-over mode". The lander will continue to transmit engineering status data and meteorological reports during the winter, but will not conduct major science operations. [1]
On the arrival of polar spring, the lander will study the geyser phenomenon from the location selected for optimum viewing. Automated geyser detection on board the spacecraft will scan the environment, although the routine imagery will be buffered on the spacecraft, images will not be relayed to Earth until the spacecraft detects a geyser. This triggers high-speed, high-resolution imagery, including LIDAR characterization of particle motion and infrared spectroscopy. Simultaneously, the science instruments will do chemical analysis of any fallout particles spewed onto the surface of the lander. [2]
Geysers erupt at a rate of about one a day during peak springtime season. If more than one is detected simultaneously, the spacecraft algorithm will focus on the nearest or "best". The lander will continue this primary geyser science for a period of about 90 days. Tens of geyser observations are expected over the spring/summer season. Extended mission operations, if desired, would continue the observation through a full Martian year and into the second Martian summer. [2]
The hopper concept could also be used for exploration missions other than the polar geyser observation mission discussed here. The ability to make multiple rocket-powered hops from an initial landing location to a science region of interest would be valuable across a large range of terrain on Mars, as well as elsewhere in the Solar System, and would demonstrate a new form of rover with the ability to traverse far more rugged terrain than any previous missions, a mission concept that would be applicable to exploration of many planets and moons. [2]
The geyser phenomenon occurs following an extended period of complete darkness, and the geysers themselves occur at the beginning of polar spring, when temperatures are in the range of −150 °C (−238 °F), and the sun angle is only a few degrees above the horizon. The extreme environment, low Sun angles during the geyser occurrence, and the fact that it would be desirable to emplace the probe well before the occurrence of the geysers, during a period of no sunlight, makes this a difficult environment for the use of solar arrays as the primary power source. Thus, this is an attractive mission for use of the Advanced Stirling Radioisotope Generator (ASRG) with a mass of 126 kilograms (278 lb) including a Li-ion battery for use during Entry/Descent/Landing (EDL) as well as during the hops when there is a short duration requirement for additional power. [2] However, the ASRG development was cancelled by NASA in 2013. [21]
Hopping propulsion is based on the Phoenix landing system, using integrated hydrazine monopropellant blow-down system with 15 Aerojet MR-107N thrusters with Isp 230 sec for landing and hopping. RCS is four pairs of Aerojet MR-103D thrusters at 215 sec Isp, and one Aerojet MR-102 thruster at 220 sec Isp. [2] The system will be fueled with 191 kg of propellant.
The lander will communicate through X-band direct to Earth on cruise deck for transit; it will then use UHF antenna. Imaging and all data relaying would be coordinated with the Mars Reconnaissance Orbiter operations team. [2]
The science instruments include stereo cameras (MastCam) to view the geyser events and a robotic arm (from Phoenix) to dig beneath the soil surface and gather soil samples for chemical analysis on the Hopper. A light detection and ranging instrument (LIDAR), a landing camera and a thermal spectrometer for remote geological analysis as well as weather sensing are included. [2]
2001 Mars Odyssey is a robotic spacecraft orbiting the planet Mars. The project was developed by NASA, and contracted out to Lockheed Martin, with an expected cost for the entire mission of US$297 million. Its mission is to use spectrometers and a thermal imager to detect evidence of past or present water and ice, as well as study the planet's geology and radiation environment. It is hoped that the data Odyssey obtains will help answer the question of whether life existed on Mars and create a risk-assessment of the radiation that future astronauts on Mars might experience. It also acts as a relay for communications between the Curiosity rover, and previously the Mars Exploration Rovers and Phoenix lander, to Earth. The mission was named as a tribute to Arthur C. Clarke, evoking the name of his and Stanley Kubrick's 1968 film 2001: A Space Odyssey.
Surveyor 6 was the sixth lunar lander of the American uncrewed Surveyor program that reached the surface of the Moon. Surveyor 6 landed on the Sinus Medii. A total of 30,027 images were transmitted to Earth.
The Mars Polar Lander, also known as the Mars Surveyor '98 Lander, was a 290-kilogram robotic spacecraft lander launched by NASA on January 3, 1999, to study the soil and climate of Planum Australe, a region near the south pole on Mars. It formed part of the Mars Surveyor '98 mission. On December 3, 1999, however, after the descent phase was expected to be complete, the lander failed to reestablish communication with Earth. A post-mortem analysis determined the most likely cause of the mishap was premature termination of the engine firing prior to the lander touching the surface, causing it to strike the planet at a high velocity.
Phoenix was an uncrewed space probe that landed on the surface of Mars on May 25, 2008, and operated until November 2, 2008. Phoenix was operational on Mars for 157 sols. Its instruments were used to assess the local habitability and to research the history of water on Mars. The mission was part of the Mars Scout Program; its total cost was $420 million, including the cost of launch.
Malin Space Science Systems (MSSS) is a San Diego, California-based private technology company that designs, develops, and operates instruments and technical equipment to fly on uncrewed spacecraft. MSSS is headed by chief scientist and CEO Michael C. Malin.
Vastitas Borealis is the largest lowland region of Mars. It is in the northerly latitudes of the planet and encircles the northern polar region. Vastitas Borealis is often simply referred to as the northern plains, northern lowlands or the North polar erg of Mars. The plains lie 4–5 km below the mean radius of the planet, and is centered at 87.73°N 32.53°E. A small part of Vastitas Borealis lies in the Ismenius Lacus quadrangle.
The Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) was a visible-infrared spectrometer aboard the Mars Reconnaissance Orbiter searching for mineralogic indications of past and present water on Mars. The CRISM instrument team comprised scientists from over ten universities and was led by principal investigator Scott Murchie. CRISM was designed, built, and tested by the Johns Hopkins University Applied Physics Laboratory.
Planum Australe is the southern polar plain on Mars. It extends southward of roughly 75°S and is centered at 83.9°S 160.0°E. The geology of this region was to be explored by the failed NASA mission Mars Polar Lander, which lost contact on entry into the Martian atmosphere.
Martian geysers are putative sites of small gas and dust eruptions that occur in the south polar region of Mars during the spring thaw. "Dark dune spots" and "spiders" – or araneiforms – are the two most visible types of features ascribed to these eruptions.
The Mare Australe quadrangle is one of a series of 30 quadrangle maps of Mars used by the United States Geological Survey (USGS) Astrogeology Research Program. The Mare Australe quadrangle is also referred to as MC-30. The quadrangle covers all the area of Mars south of 65°, including the South polar ice cap, and its surrounding area. The quadrangle's name derives from an older name for a feature that is now called Planum Australe, a large plain surrounding the polar cap. The Mars polar lander crash landed in this region.
McMurdo is a crater in the Mare Australe quadrangle of Mars, located at 84.4° S and 359.1° W. It is 30.3 km in diameter and was named after McMurdo Station in Antarctica.
The planet Mars has two permanent polar ice caps. During a pole's winter, it lies in continuous darkness, chilling the surface and causing the deposition of 25–30% of the atmosphere into slabs of CO2 ice (dry ice). When the poles are again exposed to sunlight, the frozen CO2 sublimes. These seasonal actions transport large amounts of dust and water vapor, giving rise to Earth-like frost and large cirrus clouds.
Comet Hopper (CHopper) was a proposed lander to NASA's Discovery Program that, had it been selected, would have orbited and landed multiple times on Comet Wirtanen as it approached the Sun. The proposed mission was led by Jessica Sunshine of the UMD, working with Lockheed Martin to build the spacecraft and the NASA Goddard Spaceflight Center to manage the mission.
A Mars aircraft is a vehicle capable of sustaining powered flight in the atmosphere of Mars. So far, the Mars helicopter Ingenuity is the only object to ever fly on Mars, completing 49 successful flights covering 11.28 km (7.01 mi) in 1 hour, 26 minutes and 24 seconds of flight time.
The SpaceX Red Dragon was a 2011–2017 concept for using an uncrewed modified SpaceX Dragon 2 for low-cost Mars lander missions to be launched using Falcon Heavy rockets.
Main is an impact crater on Mars, located in the Mare Australe quadrangle at 76.6°S latitude and 310.9°W longitude. It measures 109.0 kilometers in diameter and was named after Rev. Robert Main. The name was approved in 1973, by the International Astronomical Union (IAU) Working Group for Planetary System Nomenclature (WGPSN). The floor of Main shows dark portions which are caused by pressurized carbon dioxide blowing dust in the atmosphere in the spring when the temperature goes up. Some of the dust is shaped into streaks if there is a wind.
Joly is an impact crater on Mars, located at 74.7°S latitude and 42.7°W longitude in the Mare Australe quadrangle. It measures 79.9 kilometres (49.6 mi) in diameter and was named after Irish physicist John Joly (1857–1933). The name was approved in 1973, by the International Astronomical Union (IAU) Working Group for Planetary System Nomenclature (WGPSN).
Triton Hopper is a proposed NASA lander to Triton, the largest moon of Neptune. The idea is to harvest the abundant nitrogen ice on the surface of Triton and use it as propellant for multiple short flights and explore a variety of locations. The concept transitioned in March 2018 to Phase II to refine their designs and explore aspects of implementing the new technology.
The following outline is provided as an overview of and topical guide to Mars: