This article needs additional citations for verification .(March 2022) |
Mission type | Mars lander |
---|---|
Operator | National Space Centre |
COSPAR ID | 2003-022C [1] |
Mission duration | 6 months (planned) [2] |
Spacecraft properties | |
Landing mass | 33.2 kg (73 lb) |
Payload mass | 9 kg (20 lb) science instruments |
Dimensions | Folded: 1 m diameter Unfolded: 1.9 m diameter Height: 12 cm [3] |
Power | 60 W [3] |
Start of mission | |
Launch date | 2 June 2003, 07:45 UTC |
Rocket | Soyuz-FG / Fregat |
Launch site | Baikonur Cosmodrome |
Contractor | EADS Astrium |
Deployed from | Mars Express |
Deployment date | December 19, 2003 |
End of mission | |
Declared | February 6th, 2004 |
Mars lander | |
Landing date | 25 December 2003, 02:45 UTC |
Landing site | Isidis Planitia, Mars 11°31′44″N90°25′53″E / 11.52879°N 90.43139°E [4] |
The Beagle 2 was an inoperative British Mars lander that was transported by the European Space Agency's 2003 Mars Express mission. It was intended to conduct an astrobiology mission that would have looked for evidence of past life on Mars.
The spacecraft was successfully deployed from the Mars Express on 19 December 2003 and was scheduled to land on the surface of Mars on 25 December. ESA, however, received no communication from the lander at its expected landing time on Mars, and declared the mission lost in February 2004 after numerous attempts to contact the spacecraft were made. [5]
The Beagle 2's fate remained a mystery until January 2015, when it was located on the surface of Mars in a series of images from NASA's Mars Reconnaissance Orbiter HiRISE camera. [6] [7] The images showed it landed safely but two of its four solar panels failed to deploy, blocking the spacecraft's communications antenna.
The Beagle 2 is named after HMS Beagle, the ship that took the naturalist Charles Darwin on his round-the-world voyage.
Beagle 2 was conceived by a group of British academics headed by Professor Colin Pillinger of the Open University in collaboration with the University of Leicester. The project was designed and developed by several UK academics and companies. [8] The spacecraft's name reflects its goal of searching for signs of past or present life on Mars. [9] According to Pillinger:
"HMS Beagle was the ship that took [Charles] Darwin on his voyage around the world in the 1830s and led to our knowledge about life on Earth making a real quantum leap. We hope Beagle 2 will do the same thing for life on Mars." [10]
A 50 by 8 kilometres (31.1 by 5.0 mi) ellipse centered on 11°32′N90°30′E / 11.53°N 90.50°E at Isidis Planitia, an enormous, flat, sedimentary basin that overlies the boundary between the ancient highlands and the northern plains of Mars, was chosen as the landing site. [9] The lander was expected to operate for about 180 days and an extended mission of up to one Martian year (687 Earth days) was thought possible. The Beagle 2 lander's objectives were to characterise the landing site geology, mineralogy, geochemistry, and oxidation state of the physical properties of the atmosphere and surface layers; collect data on Martian meteorology and climate; and search for biosignatures.
The principal investigator, Colin Pillinger, set up a consortium to design and build Beagle 2. The principal members and their initial responsibilities were: [11]
Astrium took over responsibility for program management, and Leicester assumed responsibility for mission management which involved the preparations for the operations post launch and the operations control centre. [13]
In an effort to publicise the project and gain financial support, its designers sought and received the endorsement and participation of British artists. The mission's call-sign was composed by the band Blur, [14] and the 'test card' (Calibration Target Plate) intended for calibrating Beagle 2's cameras and spectrometers after landing was painted by Damien Hirst. [15] [16]
The Lander Operations Control Center (LOCC), from which the spacecraft was to be controlled, was located at the National Space Centre in Leicester and was visible to the public visiting the centre. The control centre included operational systems for controlling Beagle 2, analysis tools for processing engineering and scientific telemetry, virtual reality tools for preparing activity sequences, communications systems, and the Ground Test Model (GTM). The GTM was composed of builds of the Beagle 2 systems, collected together to provide a full set of lander electronics. The GTM was used nearly continuously to validate the engineering and science commands, rehearse the landing sequence, and validate the onboard software. [17]
The Beagle 2 lander was funded through a partnership arrangement involving the Open University, EADS-Astrium, the DTI, the Particle Physics and Astronomy Research Council (PPARC), the Office of Science and Technology and ESA. Funding also came from the National Space Science Centre and the Wellcome Foundation. UK principal investigators for Beagle 2 came from the Open University (gas analysis package), Leicester University (environmental sensors and x-ray spectrometer) and Mullard Space Science Laboratory (imaging systems).
— ESA [18]
The budget is secret but was estimated to be between £30 and 50 million in 2004, which at then-currency exchange rates would be about €43-71 million or US$54−89 million. [19] New Scientist magazine reported a budget of £40 million for Beagle 2, [20] and another outlet said £50 million. [5] Some of the work is known to have been donated or done at-cost. [5]
This section needs additional citations for verification .(June 2020) |
Beagle 2 has a robotic arm known as the Payload Adjustable Workbench (PAW) that was designed to be extended after landing. The arm is 109 cm (43 in) long when fully extended, and it can reach about 70 cm (28 in) to the nearest rocks. The PAW contains a pair of stereoscopic cameras, a microscope with a 6-micrometre resolution, a Mössbauer spectrometer, an X-ray spectrometer, a drill for collecting rock samples and a spot lamp.
Rock samples were to be passed by the PAW into a mass spectrometer and gas chromatograph in the body of the lander. The Gas Analysis Package (GAP) was to measure the relative proportions of isotopes of carbon and methane. Since carbon is thought to be the basis of all life, these readings could have revealed whether the samples contained the remnants of living organisms. Atmospheric methane is another signature of existing life, although geological processes can also be a source.
Beagle 2 is equipped with a small sample retrieval tool named Planetary Undersurface Tool or PLUTO (nicknamed the mole), which would have been deployed by the robotic arm. PLUTO has a compressed spring mechanism that was designed to enable it to move across the surface at a rate of 20 mm per second and to burrow into the ground, collecting a subsurface sample in a cavity in its tip. PLUTO is attached to the lander by a 3-metre (9.8 ft) power cable that could be used as a winch to bring the sample back to the lander. It had the capability to burrow to depths of 1.5 metres (4.9 ft). [3]
The lander is shaped like a shallow bowl with a diameter of 1 m (39.4 in) and a depth of 0.25 m (9.8 in). The lander's cover is hinged and folded open to reveal the craft's interior, which holds a UHF antenna, the 0.75 m (2.5 ft) long robotic arm, and the scientific equipment. The main body also contains the battery, telecommunications, electronics, central processor, heaters, additional payload items, and radiation and oxidation sensors. The lid itself should have unfolded to expose four disk-shaped solar arrays. The lander package, including heat shield, parachutes, and airbags, had a mass of 69 kg (152 lb) at launch but the lander was only 33.2 kg (73 lb) at touchdown.
The ground segment[ clarification needed ] was derived from the European Space Agency software kernel known as SCOS2000. In keeping with the low cost of the mission, the control software was the first of its type designed on a laptop computer.[ citation needed ]
This section needs additional citations for verification .(December 2016) |
Mars Express was launched from Baikonur on 2 June 2003 [14] at 17:45 UTC. Beagle 2 was initially mounted on the top deck of the European Space Agency's Mars Express orbiter. [14] It was released from the orbiter on a ballistic trajectory towards Mars on 19 December 2003. Beagle 2 coasted for six days after release and entered the Martian atmosphere at about 20,000 km/h (12,000 mph). Its expected landing was on 2:54 UT on 25 December. The lander was protected from the heat of entry by a heat shield coated with NORCOAT, an ablating material made by EADS. Compression of the Martian atmosphere and radiation from the hot gas are estimated to have led to a peak heating rate of around 100 W/cm2.
After deceleration in the Martian atmosphere, parachutes deployed and at about 200 metres (660 ft) above the surface, large airbags inflated around the lander to protect it when it hit the surface. Landing occurred at about 02:45 UTC on 25 December 2003.
After analysis of the imagery obtained in 2015, it has been conjectured after landing, the bags deflated and the top of the lander opened. These images suggest at most only two of the four solar panels were deployed. A signal was supposed to be sent to Mars Express after landing and another the next (local) morning to confirm Beagle 2 survived the landing and the first night on Mars. A panoramic image of the landing area was then supposed to be taken using the stereo camera and a pop-up mirror, after which the lander arm would have been released. The lander arm was to dig up samples to be deposited in the instruments for study, and the "mole" would have been deployed, crawling across the surface to a distance of about 3 metres (9.8 ft) from the lander and burrowing under rocks to collect soil samples for analysis.
The British government spent more than £22 million (US$40 million) on Beagle 2, with the remainder of the total £44 million (US$80 million) coming from the private sector. [22]
Although the Beagle 2 craft successfully deployed from the Mars Express, confirmation of a successful landing was not forthcoming. It should have come on 25 December 2003 when Beagle 2 was to have contacted NASA's 2001 Mars Odyssey spacecraft. In the following days, the Lovell Telescope at Jodrell Bank failed to pick up a signal from Beagle 2. The team said they were "still hopeful" of finding a successful return signal.
Attempts were made throughout January and February 2004 to contact Beagle 2 using Mars Express. The first of these occurred on 7 January 2004. Although regular calls were made, hope was placed on communication occurring on 12 January, when Beagle 2 was pre-programmed to expect the Mars Express probe to fly overhead, and on 2 February, when the probe was supposed to resort to the last communication back-up mode, Auto-transmit. No communication was ever established with Beagle 2, which was declared lost on 6 February 2004 by the Beagle 2 Management Board. On 11 February, the ESA announced an inquiry into the failure of Beagle 2 would be held. [18] The board of inquiry was unable to find concrete reasons for the probe's failure and listed plausible reasons on the report they released on 24 August 2004. [14]
On 20 December 2005, Pillinger released specially processed images from the Mars Global Surveyor that suggested Beagle 2 had landed in a crater at the landing site on Isidis Planitia. [23] It was claimed the blurry images showed the primary impact site as a dark patch and, a short distance away, Beagle 2 surrounded by the deflated airbags and with its solar panels extended. [24] Mars Reconnaissance Orbiter 's HiRISE camera imaged the area in February 2007 and revealed the crater was empty. [25]
Pillinger speculated [26] higher than expected levels of dust in the Martian atmosphere, which captures heat, caused it to expand and reduce in density so the parachutes were not able to sufficiently slow the probe's descent. This would cause the landing to be too hard, damaging or destroying the probe. A number of other failure hypotheses were produced at the time. [27] If the Martian atmosphere was thinner than expected, the parachute's effectiveness would be reduced and therefore cause the lander to hit the surface with enough speed to destroy it. [27] Turbulence in the atmosphere, which would affect the parachute, was also examined. [27]
Failures in missions to Mars are common. As of 2010, of 38 launch attempts to reach the planet, only 19 had succeeded.[ citation needed ] Failures are sometimes informally called the Mars Curse. [28]
This section needs additional citations for verification .(March 2022) |
In May 2004, the report from the Commission of Inquiry on Beagle 2 was submitted to ESA and the UK's science minister Lord Sainsbury. [29] Initially the full report was not published on the grounds of confidentiality but a list of 19 recommendations was announced to the public.
David Southwood, ESA's Director of Science, provided four scenarios of possible failures: [30]
In addition, further scenarios appeared plausible and consistent with the available body of data:
In February 2005, following comments from the House of Commons Select committee on science and technology, the report was made public and Leicester University independently published a detailed mission report, including possible failure modes and a "lessons learned". [31]
All above hypotheses were disproved in 2015 after the Mars Reconnaissance Orbiter photographed the remains of the lander: pictures show the probe landed safely and started its operations, deploying some of the solar panels before an on-ground failure prevented the full deployment of all panels; this prevented the onboard antenna, hidden under the last solar panel, from gaining visibility to any orbiter, making any form of communication with the lander impossible and leading to mission loss. This status is detailed below.
The location of Beagle 2 on Mars was unknown from late 2003 to early 2015. On 16 January 2015, more than eleven years after its loss and eight months after Colin Pillinger died, [32] news sources confirmed NASA's Mars Reconnaissance Orbiter had located the lander, [6] [7] [33] which is lying on the surface of Isidis Planitia at 11°31′44″N90°25′53″E / 11.52879°N 90.43139°E , [4] [34] [35] about 5 km (3.1 miles) from the planned centre of its landing zone. [8]
On 26 April 2016, new computer vision methods stacked multiple new images together to create a view of the lander. [36] The technique called Super-Resolution Restoration (SRR) allows improvement in resolution by taking multiple views then intensively processing them. [37] At the time, it took up to four days on the fastest-available computers to compute one improved image from five 1,000-by-2,000-pixel images. [37]
Imaging analysis appears to show the probe on the surface and partially deployed, in the expected landing area, with objects that have been interpreted as being its parachute and back cover nearby. Although several interpretations of the image are possible, all involve incomplete deployment of the probe's solar panels. Images suggest one of the "petals" on which the solar panels of the lander are mounted failed to fully open, preventing deployment of its radio antenna and blocking communication. [6] [7] [33] [38] As the probe's antenna is beneath the last panel, it would have been unable to transmit or receive in such a configuration so the lander would have been beyond recovery even if its systems were still operational. Possible failure scenarios include mechanical damage during landing, fouling of the deployment mechanism and obstruction of the panels by an airbag.
Eleven years after the landing, ESA said; [5] "Beagle 2 made it to the surface. This vindicates the engineering team's approach to landing on Mars." [5] At a news conference in London, the UKSA noted; "Beagle 2 is no longer lost". [39] In reviews of lost Mars missions, Beagle 2 and its rediscovery are typically noted. [40]
After Beagle 2 was found, apparently intact and with some solar panels deployed, the events following its landing were re-evaluated. [5] Because the early phase of mission ran on chemical battery power, it is possible the lander's Solid State Mass Memory (SSMM) recorded some data, even if it could not obtain full power from its solar panels. [5] It might eventually be possible to retrieve the data. [5] [41] A study has revealed Beagle 2 may have gone into its pre-programmed surface operations mode and collected data after landing but did not transmit it or the transmission was blocked by a closed panel. [41] [42]
Further use of some features of the Beagle 2 mission design have been proposed for other mission concepts: [43]
Beagle 2's PLUTO mole was noted in the development of InSight's Heat Flow and Physical Properties Package (HP3), an instrument that also uses a self-digging arm. [45]
The Viking program consisted of a pair of identical American space probes, Viking 1 and Viking 2, which landed on Mars in 1976. The mission effort began in 1968 and was managed by the NASA Langley Research Center. Each spacecraft was composed of two main parts: an orbiter designed to photograph the surface of Mars from orbit, and a lander designed to study the planet from the surface. The orbiters also served as communication relays for the landers once they touched down.
The Mars 2 was an uncrewed space probe of the Mars program, a series of uncrewed Mars landers and orbiters launched by the Soviet Union beginning 19 May 1971.
Mars 3 was a robotic space probe of the Soviet Mars program, launched May 28, 1971, nine days after its twin spacecraft Mars 2. The probes were identical robotic spacecraft launched by Proton-K rockets with a Blok D upper stage, each consisting of an orbiter and an attached lander.
Mars Express is a space exploration mission being conducted by the European Space Agency (ESA). The Mars Express mission is exploring the planet Mars, and is the first planetary mission attempted by the agency. "Express" originally referred to the speed and efficiency with which the spacecraft was designed and built. However, "Express" also describes the spacecraft's relatively short interplanetary voyage, a result of being launched when the orbits of Earth and Mars brought them closer than they had been in about 60,000 years.
A lander is a spacecraft that descends towards, then comes to rest on the surface of an astronomical body other than Earth. In contrast to an impact probe, which makes a hard landing that damages or destroys the probe upon reaching the surface, a lander makes a soft landing after which the probe remains functional.
NASA's Mars Exploration Rover (MER) mission was a robotic space mission involving two Mars rovers, Spirit and Opportunity, exploring the planet Mars. It began in 2003 with the launch of the two rovers to explore the Martian surface and geology; both landed on Mars at separate locations in January 2004. Both rovers far outlived their planned missions of 90 Martian solar days: MER-A Spirit was active until March 22, 2010, while MER-B Opportunity was active until June 10, 2018.
The Mars Climate Orbiter was a robotic space probe launched by NASA on December 11, 1998, to study the Martian climate, Martian atmosphere, and surface changes and to act as the communications relay in the Mars Surveyor '98 program for Mars Polar Lander. However, on September 23, 1999, communication with the spacecraft was permanently lost as it went into orbital insertion. The spacecraft encountered Mars on a trajectory that brought it too close to the planet, and it was either destroyed in the atmosphere or escaped the planet's vicinity and entered an orbit around the Sun. An investigation attributed the failure to a measurement mismatch between two measurement systems: SI units (metric) by NASA and US customary units by spacecraft builder Lockheed Martin.
The Mars Polar Lander, also known as the Mars Surveyor '98 Lander, was a 290-kilogram uncrewed spacecraft lander launched by NASA on January 3, 1999, to study the soil and climate of Planum Australe, a region near the south pole on Mars. It formed part of the Mars Surveyor '98 mission. On December 3, 1999, however, after the descent phase was expected to be complete, the lander failed to reestablish communication with Earth. A post-mortem analysis determined the most likely cause of the mishap was premature termination of the engine firing prior to the lander touching the surface, causing it to strike the planet at a high velocity.
Colin Trevor Pillinger, was an English planetary scientist. He was a founding member of the Planetary and Space Sciences Research Institute at Open University in Milton Keynes, he was also the principal investigator for the British Beagle 2 Mars lander project, and worked on a group of Martian meteorites.
The planet Mars has been explored remotely by spacecraft. Probes sent from Earth, beginning in the late 20th century, have yielded a large increase in knowledge about the Martian system, focused primarily on understanding its geology and habitability potential. Engineering interplanetary journeys is complicated and the exploration of Mars has experienced a high failure rate, especially the early attempts. Roughly sixty percent of all spacecraft destined for Mars failed before completing their missions, with some failing before their observations could begin. Some missions have been met with unexpected success, such as the twin Mars Exploration Rovers, Spirit and Opportunity, which operated for years beyond their specification.
Nozomi was a Japanese Mars orbiter that failed to reach Mars due to electrical failure. It was constructed by the Institute of Space and Astronautical Science, University of Tokyo and launched on July 4, 1998, at 03:12 JST with an on-orbit dry mass of 258 kg and 282 kg of propellant. The Nozomi mission was terminated on December 31, 2003.
Mars 96 was a failed Mars mission launched in 1996 to investigate Mars by the Russian Space Forces and not directly related to the Soviet Mars probe program of the same name. After failure of the second fourth-stage burn, the probe assembly re-entered the Earth's atmosphere, breaking up over a 320 km (200 mi) long portion of the Pacific Ocean, Chile, and Bolivia. The Mars 96 spacecraft was based on the Phobos probes launched to Mars in 1988. They were of a new design at the time and both ultimately failed. For the Mars 96 mission the designers believed they had corrected the flaws of the Phobos probes, but the value of their improvements was never demonstrated due to the destruction of the probe during the launch phase.
Beagle 3 was a proposed Mars lander mission to search for life on Mars, past or present. Beagle 3 was the proposed successor to the failed British Beagle 2 Mars lander, with which communication was lost. Beagle 3 was promoted by Professor Colin Pillinger, lead scientist on the Beagle 2. EADS Astrium also played a part in funding and early development of the project. Pillinger dreamed of launching up to two landing craft from an orbiter in 2009 as part of the European Space Agency's Aurora Programme. The putative Beagle 3 would be named after the ship HMS Beagle that took Charles Darwin around the world.
A rover is a planetary surface exploration device designed to move over the rough surface of a planet or other planetary mass celestial bodies. Some rovers have been designed as land vehicles to transport members of a human spaceflight crew; others have been partially or fully autonomous robots. Rovers are typically created to land on another planet via a lander-style spacecraft, tasked to collect information about the terrain, and to take crust samples such as dust, soil, rocks, and even liquids. They are essential tools in space exploration.
A Mars landing is a landing of a spacecraft on the surface of Mars. Of multiple attempted Mars landings by robotic, uncrewed spacecraft, ten have had successful soft landings. There have also been studies for a possible human mission to Mars including a landing, but none have been attempted.
Schiaparelli EDM was a failed Entry, Descent, and Landing Demonstrator Module (EDM) of the ExoMars programme—a joint mission of the European Space Agency (ESA) and the Russian Space Agency Roscosmos. It was built in Italy and was intended to test technology for future soft landings on the surface of Mars. It also had a limited but focused science payload that would have measured atmospheric electricity on Mars and local meteorological conditions.
The following outline is provided as an overview of and topical guide to Mars:
MGCM results are used to characterize the large-scale atmospheric fields over the primary mission (approximately 180 sols; to Ls ≈ 51).
(archived copy)