Mars Mill, Castleton

Last updated

Mars Mill
Mars Mill, Castleton Rochdale 0016.png
The mill before 1951
Greater Manchester UK location map 2.svg
Red pog.svg
Location in Greater Manchester
Cotton
Spinning (Fine Egyptianb)
Location Castleton, Rochdale, Greater Manchester, England.
Serving canal Rochdale Canal
Serving railway Lancashire and Yorkshire Railway
OwnerMars Mill Limited
Further ownership
Coordinates 53°35′49″N2°11′10″W / 53.5969°N 2.1860°W / 53.5969; -2.1860 Coordinates: 53°35′49″N2°11′10″W / 53.5969°N 2.1860°W / 53.5969; -2.1860
Power
Date1908
Engine maker Urmson & Thompson
Engine typecross compound
Valve Gear Corliss valves
Cylinder diameter and throw29" HP, 59" LP × 5-foot stroke.
rpm67 rpm
Installed horse power (ihp)1700 hp
Flywheel diameter24 ft
No. of ropes36 ropes
Boiler configuration
Pressure160 psi
Equipment
Cotton count76 +
Mule Frames115,630 mule spindles (1919)
References
[1]

Mars Mill was a former cotton spinning mill in Castleton, Rochdale, Greater Manchester, England. Castleton joined the Borough of Rochdale in 1899. Queensway, Castleton was a hub of cotton mills; Mars, Marland, and Castleton Mill were a group of three. It was taken over by the Lancashire Cotton Corporation in 1935 [2] and passed to Courtaulds in 1964 and demolished in the 1990s; Marland survived until 2004.

Contents

Location

Rochdale is a large market town in Greater Manchester, England. [3] It lies amongst the foothills of the Pennines on the River Roch, 5.3 miles (8.5 km) north-northwest of Oldham, and 9.8 miles (15.8 km) north-northeast of the city of Manchester. Rochdale is surrounded by several smaller settlements which together form the Metropolitan Borough of Rochdale.Castleton lies to the south west, just north of Chadderton, it became part of Rochdale in 1899.

Castleton is served by the Rochdale Canal which officially opened in 1804. This provides a broad canal link across the Pennines and consequently became an important transport corridor. Within Greater Manchester, the canal started at the Bridgewater Canal, linked with Ashton Canal and passed through Ancoats, Droylsden, Moston, Middleton and Chadderton before passing Castleton and to the south of Rochdale towards Todmorden. The canal carried coal and cotton to the mills, and the completed yarn to the weaving sheds. In 1890 the canal company had 2,000 barges and traffic reached 700,000 tons/year, the equivalent of 50 barges a day, [4] despite competition from the Manchester and Leeds Railway.

The rail service provided by the Manchester and Leeds Railway from 1839 had important goods yards at Castleton. It was amalgamated into the Lancashire and Yorkshire Railway in 1847; lines ran to Bury, Burnley, Oldham, Manchester and Leeds.

History

It was a boomtown of the Industrial Revolution, and amongst the first ever industrialised towns. [5] The Rochdale Canal—one of the major navigable broad canals of the United Kingdom—was a highway of commerce during this time used for the haulage of cotton, wool, coal to and from the area. [5] In 1882, Rochdale, the home of industrial co-operatives, embraced the joint stock limited company and new mills were financed and built. [6] Its ownership model was slightly different from that of Oldham, and more shares remained in the hands of the operatives. The canal created jobs for hundreds of local residents, as it enabled the construction of several cotton mills. With the mills came the need for engineering and from 1892, Castleton was the home of Tweedales and Smalley, who manufactured looms and textile machinery. Their 14-acre (5.7 ha) Globe Works factory no longer exists, now part of the Woolworth's site.

The Manchester and Leeds Railway Company (later the Lancashire and Yorkshire Railway) arrived in Castleton in 1839.

Mars Mill was a cotton mill built around 1906 by Mars Mill Limited. In 1913 the directors authorized the addition of another storey to the mill and did not pay a dividend, but made a small profit. In 1914 Mars Mill made a half-year loss of £4,486. [7] By 1919 the independent mills were struggling. The shareholders agreed to a recommendation to sell the mill to Messrs. Cottam and Mellor, of Oldham, for £258,000; that is £12.15s for each of the 16,000 ordinary shares of £2.10s. and £1.2s 6d. for each of the £1 preference shares. A new company was floated. The Mars Mill (1920) Limited, was registered with a capital of £300,000 in £1 shares. [7]

The Bank of England set up the Lancashire Cotton Corporation in 1929 to attempt to rationalise and save the industry. [8] Mars Mill, Castleton was one of 104 mills bought by the LCC, and one of the 53 mills that survived through to 1950, when it was spinning the finest Egyptian cotton, producing combed quality yarns from Ring and mule in the range of 74 to 120s. [1] It was demolished in the 1990s. The adjacent Marland Mill stood until 2004. [9]

Architecture

Standard Edwardian-style mill with a simple water tower. Detached engine house laid out for a horizontal cross compound. It had four storeys; a fifth storey was added in 1913/14 to accommodate an additional 30,000 spindles.

Engine

Driven by a 1700 hp cross compound engine by Urmson & Thompson, 1908 similar to the one in Royton Ring Mill, Royton. Probably had a 24-foot flywheel running at 67 rpm with 36 ropes. The cylinders, 29"HP, 59"LP, had a 5 ft stroke. It had Corliss valves on both cylinders. The air pump was driven from LP tail rod with support guides on LP only.

Owners

See also

Related Research Articles

Trent Mill Cotton mill in Greater Manchester, England

Trent Mill was a cotton spinning mill on Duchess Street in Shaw and Crompton, Greater Manchester, England. It was built by F.W. Dixon & Son in 1908. It closed and was taken over by the Lancashire Cotton Corporation in 1929 reopened in 1938 and closed again in 1962, and was demolished in 1967.

Rutland Mill Cotton mill in Greater Manchester, England

Rutland Mill was a cotton spinning mill on Linney Lane, in Shaw and Crompton, Greater Manchester, England. It was built by F. W. Dixon & Son in 1907 for the Rutland Mill Co. Ltd. It was taken over by the Lancashire Cotton Corporation in 1935. By 1964, it was in the Courtaulds Group. In the late 1980s, as Courtaulds moved operations to other parts of the world, the mill was bought by Littlewoods who demolished it and replaced it with a new automated storage warehouse.

Magnet Mill, Chadderton is a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built by the Magnet Mill Ltd. in 1902, but purchased by the Lancashire Cotton Corporation in 1935. It was later taken over by the Courtaulds Group. Ceasing textile production in December 1966, it was demolished soon after. A suburban residential estate now occupies this site. It was driven by a 2200 hp twin tandem compound engine by George Saxon & Co, Openshaw, 1903. It had a 27-foot flywheel with 35 ropes, operating at 64½ rpm.

Hawk Mill, Shaw Cotton mill in Greater Manchester, England

Hawk Mill, Shaw was a cotton spinning mill in Shaw, Oldham, Greater Manchester. It was built in 1908. It was taken over by the Lancashire Cotton Corporation in the 1931 and passed to Courtaulds in 1964. The mill closed in 1967, and was demolished in 1991.

Ace Mill, Hollinwood

Ace Mill is a cotton spinning mill in Chadderton in the Metropolitan Borough of Oldham, Greater Manchester. It was built as Gorse No. 2 Mill, in 1914 and cotton was first spun in 1919 by the Ace Mill Ltd, who renamed the mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1967.

Arkwright Mill, Rochdale Cotton mill in Greater Manchester, England

Arkwright Mill, Rochdale is a cotton spinning mill in Rochdale, Greater Manchester. It was built in 1885 by the Arkwright Cotton Spinning Co. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. It was located next to Dale Mill on Roch Street. The ring and doubling frames were made by Howard & Bullough, Accrington. The mill closed in 1980, was demolished in 2007 and the land redeveloped for housing.

Brunswick Mill, Ancoats Cotton mill in Manchester, England

Brunswick Mill, Ancoats is a former cotton spinning mill on Bradford Road in Ancoats, Manchester, England. The mill was built around 1840, part of a group of mills built along the Ashton Canal, and at that time it was one of the country's largest mills. It was built round a quadrangle, a seven-storey block facing the canal. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1967.

Dawn Mill, Shaw Cotton mill in Greater Manchester, England

Dawn Mill, Shaw was a cotton spinning mill in Shaw and Crompton, Oldham, Greater Manchester. It was built on the site of Shaw Mill at the "dawn" of the 20th century. Dawn Mill was equipped with mule weft spindles in 1950. It was powered by Engines named Venus and Mars, 1800 hp twin tandem compound engine by George Saxon of Manchester. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. It was sold again and used by distribution company DTS Logistics for storing and distributing clothing. It was demolished in 2006 to make way for an Asda supermarket.

Fox Mill

Fox Mill, Hollinwood is a cotton spinning mill in Hollinwood, Oldham, Greater Manchester. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964.

Royton Ring Mill, Royton Cotton mill in Greater Manchester, England

Royton Ring Mill was a cotton mill in Royton, Greater Manchester, England. It was built in 1908 and extended in 1912. It was taken over by the Lancashire Cotton Corporation in 1935 and passed to Courtaulds in 1964. Production finished in 1966. It was extended again in 1969 and used for other purposes. It has now been demolished, the street has been renamed and houses replace it.

Kent Mill, Chadderton

Kent Mill, Chadderton was a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1908 for the Kent Mill Co. It was taken over by the Lancashire Cotton Corporation in 1938 and passed to Courtaulds in 1964. Production finished in 1991 and it was demolished in 1994.

Manor Mill, Chadderton Cotton mill in Greater Manchester, England

Manor Mill, Chadderton is an early twentieth century, five storey cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1906. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1990.

Heron Mill, Hollinwood Cotton spinning mill in Oldham, Greater Manchester, England

Heron Mill is a cotton spinning mill in Hollinwood, Oldham, Greater Manchester. It was designed by architect P. S. Stott and was constructed in 1905 by the Heron Mill Company Ltd next to Durban Mill. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production ended in 1960, and it was used by Courtaulds for offices, warehousing, and some experimental fabric manufacture. Courtaulds occupation ended in 1994.

Textile Mill, Chadderton Cotton mill in Greater Manchester, England

Textile Mill, Chadderton was a cotton spinning mill in Chadderton, Oldham, Greater Manchester, England. It was built in 1882 by Potts, Pickup & Dixon for the Textile Mill Co. Ltd, and closed in 1927. It was taken over by the Lancashire Cotton Corporation in the late 1940s and passed to Courtaulds in 1964 and used for cotton waste sorting. Half of the building was destroyed by fire on 11 July 1950, but the remaining section continued to be used for cotton waste sorting by W. H. Holt and Son until 1988.

Newby Mill, Shaw Cotton mill in Greater Manchester, England

Elm Mill, is a four-storey cotton spinning mill in Shaw and Crompton, Greater Manchester, England. It was built in 1890 for the Elm Spinning Company Ltd., and was called Elm Mill until it closed in 1928. It was revived by the Lancashire Cotton Corporation in 1929 and called Newby Mill. LCC and all their assets passed to Courtaulds in 1964. Production at Newby finished in 1970, and it was used for warehousing. Subsequently, now named Shaw No 3 Mill, it became part of Littlewood's Shaw National Distribution Centre.

Royd Mill, Oldham Cotton mill in Greater Manchester, England

Royd Mill, Oldham was a cotton spinning mill in Hollinwood, Oldham, Greater Manchester, England. It was built in 1907, and extended in 1912 and 1924. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1981. The mill was demolished in 2015 to make way for a "DifRent" housing scheme.

Malta Mill, Middleton Cotton mill in Greater Manchester, England

Malta Mill, Middleton is a former cotton spinning mill in the Mills Hill area of Chadderton, Greater Manchester. It lies alongside the Rochdale Canal. It was built in 1904 as a new mule mill, by F. W. Dixon The engine stopped in 1963. The building still stands.

Laurel Mill, Middleton Junction Former cotton mill in Manchester, England

Laurel Mill was a cotton spinning mill in the Mills Hill/Middleton Junction area of Chadderton, Oldham, Greater Manchester, England.

Junction Mill, Middleton Junction Cotton mill in Greater Manchester, England

Junction Mill, Middleton Junction is a cotton spinning mill at Middleton junction, Chadderton in Greater Manchester alongside the Rochdale Canal.

Harp Mill, Castleton Cotton mill in Greater Manchester, England

Harp Mill was a former cotton spinning mill in the Castleton, Rochdale, Greater Manchester, England. Queensway, Castleton was a hub of cotton mills including the three 't', Th'Arrow, Th'Harp, and Th'Ensor. The 1908 Castleton map includes: Marland Cotton Mill, Castleton Cotton Mill, Globe Works, Arrow Cotton Mill, Harp Cotton Mill, Globe Leather Works, Castleton Size Works and Castleton Iron Works. Th'Harp was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. The site now houses industrial units.

References

  1. 1 2 LCC 1951
  2. ↑ The Times, 10 January 1936, p. 18
  3. ↑ Greater Manchester Gazetteer, Greater Manchester County Record Office, Places names – O to R, archived from the original on 18 July 2011, retrieved 9 July 2007
  4. ↑ New Moston History Society "Rochdale Canal" . Retrieved 16 December 2007.[ permanent dead link ]
  5. 1 2 . McNeil, R.; Nevell, M. (2000), A Guide to the Industrial Archaeology of Greater Manchester, Association for Industrial Archaeology, ISBN   0-9528930-3-7
  6. ↑ Williams & Farnie 1992 , p. 44
  7. 1 2 "Mars Mill. Reports of Shareholder Meetings". Link4Life. Archived from the original on 18 July 2011. Retrieved 24 August 2021.PD-icon.svgThis article incorporates text from this source, which is in the public domain .
  8. ↑ Dunkerley 2009
  9. ↑ Ayala, Beatriz (14 December 2004), "Memories of Marland fall to the ground", Rochdale Observer, M.E.N. Media

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.