Waterside Mill, Ashton-under-Lyne

Last updated

Waterside Mill
Waterside Mill, Ashton 0020.png
The mill before 1951
Greater Manchester UK location map 2.svg
Red pog.svg
Location in Greater Manchester
Cotton
Spinning (mule mill) and Weaving shed
Location Ashton-under-Lyne, Greater Manchester, England
Serving canal Huddersfield Narrow Canal
Serving railway Lancashire and Yorkshire Railway
OwnerThomas Mellor & Sons
Further ownership
  • Waterside Mill Company (1863, incorporated 1884)
  • Thomas Mellor & Sons Ltd (again), Ashton Ring Spinning Company (1896, 1920s)
  • Lancashire Cotton Corporation (1930s)
Coordinates 53°29′00″N2°05′10″W / 53.4833°N 2.0861°W / 53.4833; -2.0861 Coordinates: 53°29′00″N2°05′10″W / 53.4833°N 2.0861°W / 53.4833; -2.0861
Construction
Built1863 (main mill)
Floor count4
Power
Date1880
Engine maker George Saxon & Co
Engine typehorizontal compound
Installed horse power (ihp)640
Equipment
No. of looms990(1911)
Mule Frames34,256 spindles (1884–1911)
Ring Frames path56,220 spindles (1911–1930s)
65488 (1938)
References
[1] [2]

Waterside Mill, Ashton-under-Lyne was a combined cotton spinning weaving mill in Whitelands, Ashton-under-Lyne, Greater Manchester, England. It was built as two independent factories. The weaving sheds date from 1857; the four-storey spinning mill dates from 1863. The spinning was taken over by the Lancashire Cotton Corporation in the 1930s. Production finished in 1959. [3] Waterside Mill was converted to electricity around 1911. [2]

Contents

Location

Ashton-under-Lyne is a market town in the Tameside, Greater Manchester, England. [4] Historically a part of Lancashire, it lies on the north bank of the River Tame, on undulating land at the foothills of the Pennines. To the south of the river is the town of Dukinfield, which Historically a part of Cheshire. Ashton (as it is often shortened to) is 3.8 miles (6.1 km) south-southeast of Oldham, 6.1 miles (9.8 km) north-northeast of Stockport, and 6.2 miles (10.0 km) east of the city of Manchester. The Portland Basin in Ashton was the terminus of the Ashton Canal, and the start of both the Huddersfield Narrow Canal and the Peak Forest Canal. Ashton was served by the Ashton, Stalybridge and Liverpool Junction Railway from 1844, and then with further lines created by the Oldham, Ashton and Guide Bridge Railway in 1861.

History

Until the introduction of the cotton trade in 1769, Ashton was considered "bare, wet, and almost worthless". [5] The factory system, and textile manufacture during the Industrial Revolution triggered a process of unplanned urbanisation in the area, and by the mid-19th century Ashton had emerged as an important mill town at a convergence of newly constructed canals and railways. Ashton-under-Lyne's transport network allowed for an economic boom in cotton spinning, weaving, and coal mining, which led to the granting of honorific borough status in 1847.

The engine of growth in the second half of the nineteenth century was the joint stock company, whereby capital could be raised for the construction of new mills. The first joint stock boom was in the early 1860s was cut short by the Lancashire Cotton Famine. During the second boom between 1873 and 1875 about a dozen companies were formed, half were 'Turn-over' companies which bought existing mills from private owners. New mills were built at Whitelands and Guide Bridge. The third wave was from 1880 to 1884; only five companies were formed in Ashton of which two built mills, one being a weaving shed. The fourth and last boom of 1889 to 1892 saw the building of seven substantial mills by the 'Ashton Syndicate'. [6]

Waterside Mill began as two independent manufactories. The earliest factory was a weaving shed erected by Thomas Mellor and Sons in 1857, at Sharp's Shrubberies in Whitelands, they already had a combined mill on Gas Street which could not be expanded. The Whitelands mill was a four-storey building built by George Harry Mellor, and leased to the Waterside Mill Company, who were registered with a capital of £20,000. It was equipped with 34,256 mule spindles. By 1896 both buildings were being operated by Thomas Mellor and Sons, and before the First World War the mills were physically joined. Waterside became a combined mill, weaving fancies from coarser cotton counts of American cottons. [2]

The industry peaked in 1912 when it produced 8 billion yards of cloth. The Great War of 1914–18 halted the supply of raw cotton, and the British government encouraged its colonies to build mills to spin and weave cotton. The war over, Lancashire never regained its markets. The independent mills were struggling. Waterside Mill was split into two units again. The Bank of England set up the Lancashire Cotton Corporation in 1929 to attempt to rationalise and save the industry. [7] The spinning side of Waterside Mill, Ashton-under-Lyne was one of 104 mills bought by the LCC, and one of the 53 mills that survived through to the early 1950s. The weaving sheds passed to Tattersall's Limited and closed in the 1930s. [2]

Architecture

Power

A pair of George Saxon & Co horizontal compound engines delivering 640 iHP. This was removed by 1911 when the mill was electrically driven. [2] [8]

Equipment

Owners

See also

Related Research Articles

Regent Mill, Failsworth Cotton mill in Greater Manchester, England

Regent Mill, Failsworth is a Grade II listed former cotton spinning mill in Failsworth, Oldham, Greater Manchester, England. It was built by the Regent Mill Co Ltd. in 1905, and purchased by the Lancashire Cotton Corporation in 1930. It was taken over by the Courtaulds Group in 1964. On ceasing textile production it was occupied by Pifco Ltd, and then by Salton Europe Ltd who now occupy this site. It was driven by an 1800 hp twin tandem compound engine by Buckley & Taylor. It became a ring mill with 60,000 spindles in 1915, all provided by Platt Brothers.

Tudor Mill, Ashton-under-Lyne Cotton mill in Greater Manchester, England

Tudor Mill was cotton spinning mill in Ashton-under-Lyne, in the historic county of Lancashire, England. It was built between 1901 and 1903 for the Ashton Syndicate by Sydney Stott of Oldham. Tudor Mill was next to the Ashton Canal Warehouse at Portland Basin. It ceased spinning cotton in the 1960s and was used as a warehouse until it was destroyed by fire in 1970

Minerva Mill, Ashton-under-Lyne Cotton mill in Greater Manchester, England

Minerva Mill was a cotton spinning mill in Ashton-under-Lyne, Greater Manchester, England. It was built between 1891 and 1892 for the Minerva Spinning Company which was later known as the Ashton Syndicate. Minerva Mill was next to the later Texas mill, at Whitelands. It ceased spinning cotton in the 1920s and was demolished in 1937.

Rock Mill, Ashton-under-Lyne Cotton mill in Greater Manchester, England

Rock Mill was cotton spinning mill in the Waterloo district of Ashton-under-Lyne, Greater Manchester, in England. It was built between 1891 and 1893 for the Ashton Syndicate by Sydney Stott of Oldham. Rock Mill was built on the site of Wilshaw Mill retaining and using the octagonal chimney. It ceased spinning cotton in the 1960s and was demolished in 1971; the site became the location for the town's first Asda supermarket, which opened in 1972, until Asda relocated to a much larger new store site in Cavendish Street in 1989.

Atlas Mill, Ashton-under-Lyne Cotton mill in Greater Manchester, England

Atlas Mill was a cotton spinning mill in the Waterloo district of Ashton-under-Lyne, Greater Manchester, in England. It was built between 1898 and 1900 for the Ashton Syndicate by Sydney Stott of Oldham. It was last mill in Ashton to cease spinning. It was spinning artificial fibres in 1987, and was demolished in 1994; the site is now a housing estate.

Texas Mill, Ashton-under-Lyne Former cotton spinning mill in Ashton-under-Lyne, England

Texas Mill was a cotton spinning mill in the Whitelands district of Ashton-under-Lyne, Greater Manchester, in England. It was built between 1905 and 1907 for the Ashton Syndicate by Sydney Stott of Oldham. It was destroyed in a massive fire on 22–23 October 1971. It had been re-equipped as a ring mill for spinning artificial fibres when it was destroyed.

Cedar Mill, Ashton-under-Lyne

Cedar Mill was a cotton spinning mill in the Hurst area of Ashton-under-Lyne, Greater Manchester, in England. It was built between 1903 and 1905 for the Ashton Syndicate by Sydney Stott of Oldham. It was the last mill in Ashton spinning cotton. It ceased in 1980. It was demolished and the land was used for housing.

Junction Mills, Ashton-under-Lyne Cotton Mill in Greater Manchester, England

The Junction Mills were cotton spinning and weaving mills to the west of the Portland Basin in Ashton-under-Lyne, Greater Manchester, in England. They were built between 1831 and 1890 for the Samuel Heginbottom and his sons. The firm went out of business in 1930, and all the buildings have been demolished but the 210 feet (64 m) octagonal chimney, built in 1867, and typical of that period has been preserved in situ.

Arkwright Mill, Rochdale Cotton mill in Greater Manchester, England

Arkwright Mill, Rochdale is a cotton spinning mill in Rochdale, Greater Manchester. It was built in 1885 by the Arkwright Cotton Spinning Co. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. It was located next to Dale Mill on Roch Street. The ring and doubling frames were made by Howard & Bullough, Accrington. The mill closed in 1980, was demolished in 2007 and the land redeveloped for housing.

Palmer Mills, Stockport

Palmer Mills, Stockport were cotton spinning mills in Portwood, Stockport, Greater Manchester. Built in the late 19th century, It was taken over by the Lancashire Cotton Corporation in the 1930s and sold on. Renamed the Stockport Paper Mill they survived into the 21st century when they were demolished to be replaced by modern businesses.

Vernon Mill, Stockport Cotton mill in Greater Manchester, England

Vernon Mill, Stockport is a former cotton spinning mill in Portwood, Stockport, Greater Manchester, England. Built in 1881, it was taken over by the Lancashire Cotton Corporation in 1930 and later sold on. Although still in business use, it is now a grade II listed building.

Saxon Mill, Droylsden Cotton mill in Greater Manchester, England

Saxon Mill, Droylsden was a cotton spinning mill in Droylsden, Tameside, Greater Manchester, England. It was built in the 1907, taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1967, and the mill was demolished in 1995.

Stalybridge Mill, Stalybridge Cotton mill in Greater Manchester, England

Stalybridge Mill, Stalybridge is a cotton spinning mill in Stalybridge, Tameside, Greater Manchester, England. It was built in 1868, and the engine reconfigured in around 1925. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964.

Kent Mill, Chadderton

Kent Mill, Chadderton was a cotton spinning mill in Chadderton, Oldham, Greater Manchester. It was built in 1908 It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1991 and it was demolished in 1994.

Monton Mill, Eccles Cotton spinning mill in Eccles, Greater Manchester, UK

Monton Mill was a cotton spinning mill in Eccles, Greater Manchester, England, built in 1906. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. After production ended, it was demolished and replaced with housing; its name is preserved in the street name.

Laurel Mill, Middleton Junction Former cotton mill in Manchester, England

Laurel Mill was a cotton spinning mill in the Mills Hill/Middleton Junction area of Chadderton, Oldham, Greater Manchester, England.

Junction Mill, Middleton Junction Cotton mill in Greater Manchester, England

Junction Mill, Middleton Junction is a cotton spinning mill at Middleton junction, Chadderton in Greater Manchester alongside the Rochdale Canal.

Harp Mill, Castleton Cotton mill in Greater Manchester, England

Harp Mill was a former cotton spinning mill in the Castleton, Rochdale, Greater Manchester, England. Queensway, Castleton was a hub of cotton mills including the three 't', Th'Arrow, Th'Harp, and Th'Ensor. The 1908 Castleton map includes: Marland Cotton Mill, Castleton Cotton Mill, Globe Works, Arrow Cotton Mill, Harp Cotton Mill, Globe Leather Works, Castleton Size Works and Castleton Iron Works. Th'Harp was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. The site now houses industrial units.

Mars Mill, Castleton Cotton mill in Greater Manchester, England

Mars Mill was a former cotton spinning mill in Castleton, Rochdale, Greater Manchester, England. Castleton joined the Borough of Rochdale in 1899. Queensway, Castleton was a hub of cotton mills; Mars, Marland, and Castleton Mill were a group of three. It was taken over by the Lancashire Cotton Corporation in 1935 and passed to Courtaulds in 1964 and demolished in the 1990s; Marland survived until 2004.

Empress Mill, Ince Cotton mill in Greater Manchester, England

Empress Mill, Ince was a single storey shed mill alongside the Leeds and Liverpool Canal, spinning cotton in Ince, Wigan, Greater Manchester, England. It was acquired by the Lancashire Cotton Corporation in 1930, and passed to Courtaulds in 1964. Production ceased in 1975. It was the last mill in Ince to close, despite the intervention of Member of Parliament Michael McGuire, and a debate in the House of Commons on 20 March 1975.

References

  1. ↑ LCC 1951
  2. 1 2 3 4 5 Haynes 1987, p. 42
  3. ↑ The Times, 26 September 1959
  4. ↑ Greater Manchester Gazetteer, Greater Manchester County Record Office, Places names - A, archived from the original on 18 July 2011, retrieved 20 September 2008
  5. ↑ Wilson (1870–1872).
  6. ↑ Haynes 1987 , p. 4
  7. ↑ Dunkerley 2009
  8. ↑ Roberts 1921

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.