Mount Pleasant Caldera

Last updated
Mount Pleasant Caldera
Canada New Brunswick location map 2.svg
Red triangle with thick white border.svg
Mount Pleasant Caldera
Highest point
Elevation Approx. 248 m (814 ft)
Listing List of volcanoes in Canada
Coordinates 45°30′01.35″N66°45′16.31″W / 45.5003750°N 66.7545306°W / 45.5003750; -66.7545306
Geography
Location Charlotte County, New Brunswick, Canada
Parent range Appalachian Mountains
Topo map 021G07
Geology
Age of rock Late Devonian
Mountain type Caldera
Climbing
Easiest route All-weather road [1]

The Mount Pleasant Caldera is a large eroded Late Devonian volcanic caldera complex, located in the northern Appalachian Mountains of southwestern New Brunswick, Canada. It is one of few noticeable pre-Cenozoic calderas, and its formation is associated to a period of crustal thinning that followed the Acadian orogeny in the northern Appalachian Mountains. [2] It sits relatively near to the coastline. [3]

Contents

Geology

The large elliptical feature is dated back to the late Devonian Period, and is partially covered in the north by overlying Middle Mississippian and Pennsylvanian Period strata. [2] The volcano is north-south trending in its elliptical shape, with minimum dimensions of 13 by 34 kilometres (8 mi × 21 mi) as outlined by regional gravitational and magnetic studies. The northern half of the volcano has since been covered by depositional rock strata. [4] The caldera is bounded to the east and west by fused Ordovician to Silurian turbiditic metasedimentary rocks of the local Digdeguash and Flume Ridge geological formations. [4]

Late Silurian to Devonian granitic rocks of the Saint George Batholith bound part of the southern margin of the caldera. Rocks within the summit itself date back to the Upper Devonian, and show multiple fill sequences late in its history. [4]

The magma produced by Pleasant is rich in silica, as indicated by a large amounts of ignimbrite, tuff, rhyolite, and other igneous rocks rich in the mineral. Silica-rich magma does have a high viscosity, and therefore does not flow easily like basalt. As a result, gases tend to become trapped at high pressure within the magma. When the magma approaches the surface of the Earth the rapid off-loading of overlying material causes the trapped gases to decompress rapidly triggering explosive destruction of the magma and spreading volcanic ash over wide areas. [5]

Intrusion-related gold veins have recently[ when? ] raised great interest among economic geologists [ example needed ]. In southwestern New Brunswick, which is part of the Canadian Alleghenian orogeny, several gold deposits have been recorded in the past[ when? ]. The positive early results have created great interest for gold-finding efforts, and the Mount Meager massif has proven to be an ideal candidate. [6]

Granitic intrusions within the caldera complex include the McDougall Brook Microgranite and the somewhat younger Mount Pleasant Granite. Gold quartz breccias and veins cut the McDougall Brook Microgranite and its volcanic wall-rock, while molybdenum-bismuth-tungsten and later polymetallic mineralization are related to the multiphase Mount Pleasant Granite. [7]

The numerous felsic sections are associated with episodes of fractional crystallization in a high-level, zoned magma chamber. Fractionation was continually interrupted by eruption of material from the roof zone such that seven phases of caldera growth have been recognized. [7]

Mount Pleasant lies along the southwestern margin of the caldera complex. Two mineralized zones, termed the Fire Tower Zone and the North Zone, occur within volcanic plugs about 1 kilometre (1 mi) apart. The volcanic necks are defined by magmatic-hydrothermal breccias. [4] [7]

Eruptive history

The eruptive history of the Mount Pleasant Caldera can be divided into three stages of activity: the exocaldera sequence, the intracaldera sequence, and the late caldera-fill sequence. These can further be subdivided into strata based on their depth below the surrounding rock. [4]

The Intercaldera Sequence comprises formations that crop out from overlying flows in triangularly shaped area, and includes thick volcanic ash (tuff), thick breccia layers, and intermediate to felsic igneous rocks that tend to intrude the above layers and are typically located along caldera margin faults. [2] The Exocaldera Sequence contains ash flow tuffs, mafic lavas, alluvial redbeds, and porphyritic felsic lavas that are distributed across five different layers. The late Caldera-Fill Sequence contains rocks that are similar to those of the outflows of the other, older layers, and comprises two formations and two relatively minor intrusive lava flows. The volcanic flows are generally mafic. The stratigraphic subdivision is supported by geochemical and mineralogical analyses, which indicate that the basaltic rocks are mantle-derived and have, unusually, relatively intraplate (or hotspot) type chemical affinities. [2] The multiple andesite flows were probably derived from basaltic magma by the crystallization of the magma material. The relatively rare, more felsic flow units, are thought to have originated from high-end crystallization inside the magma chamber. The various stages of fractionation are continually interrupted by eruptions, and have allowed scientists to recognize seven stages of caldera development. The genesis of the caldera is related to a period of lithospheric thinning that followed the Acadian Orogeny in the northern Appalachians. [2]

The relative position of the Exocaldera and Intracaldera sequences is based on several observations: [4]

Exocaldera sequence

The exocaldera sequence consists of, in ascending stratigraphic order, the Hoyt Station Basalt, Rothea Formation, South Oromocto Andesite, Carrow Formation and Bailey Rock Rhyolite. The first and last flow units have the least extent, evidence of erosional activity after their formation but before the next deposited layer. [4]

The first and oldest layer is the Hoyt Station basalt formation, which is composed of at least two flow units. There are two types of rock associated with the basalt, conglomerate ranging in particle size from small pebbles to cobbles, and lithic lapilli-tuff (well-worn, consolidated volcanic ash). [4] It is only directly exposed at the surface in one area, as a tuff on an extended solidified multi-age lava flow that extends northeast from the northern section of the volcano, colored green in the diagram at right. [4]

The next oldest layer is the Rothea formation. It can be divided into three major lava flow layers. The lower member consists mainly of unwelded (unjoined), but heavily compacted, pumiceous lapilli-tuff and crystal tuff strata. The middle member consists of rock ranging from nearly aphyric tuff at the base to crystal tuff near the top. [4] The top section of the middle unit contains pyroxene. The top member consists of a fine-grained, typically reddish lava flow and another lithic tuff unit. It can be found exposed in a limited region, encompassing the flank of the Hoyt Station basalt, colored light yellow in the diagram at right; it also peeks out closer to the volcano twice. [4]

The next layer, the South Oromocto Andesite formation, is composed of at least three flow units, with basalt flows being the most extensive. Only one exhibits a porphyritic texture. Calcite veins and hematite bands near the top of the layer indicate that this was a period of degassing in the flow. [4] It forms a thin band around the Rothea formation.

The Carrow formation is a predominantly fine-grained redbed (consisting of typically red sedimentary rocks) unit that has a grade ranging from pebbles and cobble in conglomerate at the base to mudstone laced with calcrete at the top. The flow is littered with abundant flows from the Seelys (in the intercaldera sequence) and Rothea (earlier) formation towards the southeast, but in the north metasedimentary rocks, which are sedimentary rocks exhibiting metamorphosis, predominate. [4] The lower part of the formation consists of unwelded and highly compacted lapilli tuff with abundant amounts of pumice fragments. A basalt and basalt-clad mudflow occurs near the top of the formation in some places. A dated locality from the top of the formation has been dated to the Late Devonian, around 350 million years ago. The exposed part of the formation forms a long band around the South Oromocto Andesite formation, and is colored brown on the map. [4]

The last formation in the later, the Bailey Rock Rhyolite formation, is composed of porphyritic lava, and is characterized by an absence of angular crystals and pumice derivatives. In places its rhyolite composition intrudes older stratas. This layer is unique for it bridges the exocaldera and intracaldera sequences. A layer of saprolite (chemically weathered rock) separates the Bailey Rock Rhyolite formation from the overlying Caldera-Fill Sequence-era rocks. The exposed part of the flow overlies part of the Carrow formation, and is colored pink in the diagram above-right. [4]

Intracaldera sequence

The Intercaldera Sequence is divided into, in ascending order, the Scoullar Mountain formation, Little Mount Pleasant formation, Seelys formation, and McDougall Brook Granite formation. In addition, there are felsic dykes and one mafic dyke that intrude the Scoullar Mountain and Little Mount Pleasant formations, respectively. [4]

The first sequence in the order is the Scoullar Mountain formation. The layer is characterized by sedimentary breccia and interbedded andesitic lava. In addition felsic pyroclastic rocks are very common in places and one sandstone-conglomerate lava flow can be found. [4] The sedimentary breccia is dominated by pebble to boulder size angular metasedimentary stratas, and a few crystal tuff layers that contain about 1% biotite, the only such high amount of a typically trace mineral outside of Rothea formation in the Extracaldera sequence. A pumice-ridden lapilli-tuff section near the believed top section additionally has a 1% composition of the mineral amphibole. The exposed portion of the flows loosely flank the slopes of the volcano on the left and right, and are represented by bright orange on the map. [4]

The next layer is the Little Mount Pleasant formation, which is composed of crystal tuff and banded rhyolite. The tuff is characterized by, recrystallized pumice with microscopic crystals and amphibole. The crystal structure inside the pumice are larger than those outside, indicating that significant mechanical breakage during the eruption in which they were deposited. The exposed part of this layer is located around the southern base of the main caldera, and is colored ochre (light orange) on the diagram. [4]

The Seelys formation, next in the order, consists of lithic tuff and pumice-littered lithic lapilli-tuffs, banded, pumiceous, crystal tuff, and densely welded crystal tuff. The basalt contains clasts of both the Scoullar Mountain andesite and Little Mount Pleasant formation. Quartz and feldspar increase in size and abundance yoward the top. Biotite is virtually absent, but zircon is very common. The formation is colored the lightest orange on the map, and swathes across the main body of the caldera. [4]

The McDougall Brook Granite formation consists mostly of porphyritic granite, a borderline feldspar (sometimes quartz) porphyry, and minor amounts of fine-grained quartz monzonite. The grain size of the porphyry and the size and abundance of feldspar increases inward. Amphibole with apatite is the main mineral phase in all three of the flows. Parts of the feldspar porphyry are hydrothermally altered. The deposit is extensively exposed, and is colored red on the map. [4]

Late Caldera-fill sequence

The Late Caldera-Fill sequence includes the Mount Pleasant Porphyry, the Big Scott Mountain formation, and the Kleef formation. The ages of the rocks are not well-established, but they are most likely Late Devonian and Mississippian. In addition the Intracaldera sequence is cut into multiple intrusions of varying origins. Many of the intrusions are thought to have formed without eruption, when mineral deposits "leaked." [4]

The Mount Pleasant Porphyry formation occurs as dykes and small rock areas that have been associated with local breccia. The dyke structures seem to indicate multiple periods of intrusion. Two types of breccias have been identified, and older and more common felsic series, and a younger neutral phase. The porphyries making up the rocks were emplaced at the pre-existing volcanic margin. [4]

The Big Scott Mountain formation consists of rhyolite of variable composition, lapilli-tuff, and crystal tuff. Most of the rhyolites are characterized by large amounts of pyroxene. One rhyolite unit appears to overlie the McDougall Brook Granite formation. The tuff is littered by clasts from the Seelys and McDougall Brook Granite formations. The tuff also appears to be layered. It is colored dark orange on the map, and the exposed part partially rings the north of the volcano. [4]

The final formation, the Kleef formation, includes redbed, basalt and pumice-ridden tuff. Pebble to cobble sized conglomerate is also seen complementing the volcanic rock, and parts seem to come from older formations. The basalt is characterized by large crystals (up to 2 cm (1 in)). The tuff are characterized by their reddish-brown color and abundant fossil-pumice. The formation is very rare exposed and of interest to economic geologists, as it contains many of the possibly gold-bearing intrusive areas. It is colored light blue on the map. [4]

Mining

Indium wire. The rare element, used in flat-panel televisions, computers and smart phones, is one of the key mined resources at Mount Pleasant. Indium wire.jpg
Indium wire. The rare element, used in flat-panel televisions, computers and smart phones, is one of the key mined resources at Mount Pleasant.

Mount Pleasant has a long history of exploration and development in mining. Tin was first discovered on the mountain in 1937. The focus of exploration over the years has shifted from tin-base metals to porphyry tungsten-molybdenum-bismuth deposits, and then to porphyry tin deposits, and now indium, a rare element that is important to new technologies such as LCD screens and solar cells, computers and smart phones. [1]

The Mount Pleasant mine is located 80 km (50 mi) south of Fredericton, the provincial capital. The mining company Adex Mining Inc. holds 102 prospective claims covering approximately 1,600 hectares (4,000 acres) and 405 hectares (1,000 acres) of surface rights at Mount Pleasant, dominating the local extraction rights. [1] It is situate close to infrastructure and potential employees. With a population of 50,000, Fredericton is important to the mine, as is Saint John, with a population of 70,000, which lies about 80 km (50 mi) o the southeast. Mount Pleasant is also only 65 km (40 mi) from the Canada–United States border. When the mine was last producing - 1983 to 1985 - tungsten ore was regularly transported through Saint John by means of a provincial highway for shipment to Europe. The mine site is accessible via all-weather roads from Fredericton, Saint John and St. George. Electricity is provided by the New Brunswick transmission grid and water from a pump house located on the nearby Piskahegan River. [1]

On September 25, 2005, the Society of Economic Geologists hosted a small field trip to the caldera and the nearby Mount Pleasant Mine and Clarence stream deposit. [8] The trip was divided into three stages: the Mount Pleasant Caldera, the Mount Pleasant Mine, and the Clarence Stream deposits. The field crew described two trenches that seemed to outline the relationship between the volcanic rock and the possibly gold-rich intrusive areas. [8]

On June 25, 2008, Geodex Minerals Ltd., a gold venture firm, announced the results of a 2007 - early 2008 diamond drilling program on the west side of Mount Pleasant. Along with the development of the Sisson Brook tungsten-molybdenum-copper project north of Fredericton, the area surrounding the former Mount Pleasant mine has been a major focus of the company. [9] Research is ongoing, and focuses on the two most likely candidates: the McDougall Brook Granitic suite (MBG) and the Mount Pleasant Granitic suite (MPG). [6] In June 2011, the owners moved their corporate offices from Toronto to Fredericton with the intent of refocusing efforts onto getting the mine running again by 2012. [10]

See also

Related Research Articles

<span class="mw-page-title-main">Tuff</span> Rock consolidated from volcanic ash

Tuff is a type of rock made of volcanic ash ejected from a vent during a volcanic eruption. Following ejection and deposition, the ash is lithified into a solid rock. Rock that contains greater than 75% ash is considered tuff, while rock containing 25% to 75% ash is described as tuffaceous. Tuff composed of sandy volcanic material can be referred to as volcanic sandstone.

<span class="mw-page-title-main">Rhyolite</span> Igneous, volcanic rock, of felsic (silica-rich) composition

Rhyolite is the most silica-rich of volcanic rocks. It is generally glassy or fine-grained (aphanitic) in texture, but may be porphyritic, containing larger mineral crystals (phenocrysts) in an otherwise fine-grained groundmass. The mineral assemblage is predominantly quartz, sanidine, and plagioclase. It is the extrusive equivalent to granite.

<span class="mw-page-title-main">Volcanic glass</span> Product of rapidly cooling magma

Volcanic glass is the amorphous (uncrystallized) product of rapidly cooling magma. Like all types of glass, it is a state of matter intermediate between the closely packed, highly ordered array of a crystal and the highly disordered array of liquid. Volcanic glass may refer to the interstitial material, or matrix, in an aphanitic (fine-grained) volcanic rock, or to any of several types of vitreous igneous rocks.

<span class="mw-page-title-main">Extrusive rock</span> Mode of igneous volcanic rock formation

Extrusive rock refers to the mode of igneous volcanic rock formation in which hot magma from inside the Earth flows out (extrudes) onto the surface as lava or explodes violently into the atmosphere to fall back as pyroclastics or tuff. In contrast, intrusive rock refers to rocks formed by magma which cools below the surface.

<span class="mw-page-title-main">Volcanic rock</span> Rock formed from lava erupted from a volcano

Volcanic rock is a rock formed from lava erupted from a volcano. Like all rock types, the concept of volcanic rock is artificial, and in nature volcanic rocks grade into hypabyssal and metamorphic rocks and constitute an important element of some sediments and sedimentary rocks. For these reasons, in geology, volcanics and shallow hypabyssal rocks are not always treated as distinct. In the context of Precambrian shield geology, the term "volcanic" is often applied to what are strictly metavolcanic rocks. Volcanic rocks and sediment that form from magma erupted into the air are called "pyroclastics," and these are also technically sedimentary rocks.

<span class="mw-page-title-main">Ignimbrite</span> Type of volcanic rock

Ignimbrite is a type of volcanic rock, consisting of hardened tuff. Ignimbrites form from the deposits of pyroclastic flows, which are a hot suspension of particles and gases flowing rapidly from a volcano, driven by being denser than the surrounding atmosphere. New Zealand geologist Patrick Marshall (1869–1950) coined the term ignimbrite from the Latin igni- [fire] and imbri- [rain].

<span class="mw-page-title-main">Anahim Volcanic Belt</span> Chain of volcanoes and related magmatic features in British Columbia, Canada

The Anahim Volcanic Belt (AVB) is a west–east trending chain of volcanoes and related magmatic features in British Columbia, Canada. It extends from Athlone Island on the Central Coast, running eastward through the strongly uplifted and deeply dissected Coast Mountains to near the community of Nazko on the Interior Plateau. The AVB is delineated as three west-to-east segments that differ in age and structure. A wide variety of igneous rocks with differing compositions occur throughout these segments, comprising landforms such as volcanic cones, volcanic plugs, lava domes, shield volcanoes and intrusions.

<span class="mw-page-title-main">Musgrave Block</span> Geologic formation in Australia

The Musgrave Block is an east-west trending belt of Proterozoic granulite-gneiss basement rocks approximately 500 kilometres (310 mi) long. The Musgrave Block extends from western South Australia into Western Australia.

<span class="mw-page-title-main">Ilgachuz Range</span> Extinct volcano in British Columbia, Canada

The Ilgachuz Range is a name given to an extinct shield volcano in British Columbia, Canada. It is not a mountain range in the normal sense, because it was formed as a single volcano that has been eroded for the past 5 million years. It lies on the Chilcotin Plateau, located some 350 kilometres (220 mi) north-northwest of Vancouver and 30 km north of Anahim Lake. The highest peak of the range is Far Mountain. The range supports a unique grassland ecosystem. This type of grassland has not been seen anywhere else in central and southern British Columbia. The climate is cool and dry; typical of higher elevations of the Interior Plateau.

<span class="mw-page-title-main">Temagami Greenstone Belt</span> Greenstone belt in Northeastern Ontario, Canada

The Temagami Greenstone Belt (TGB) is a small 2.7 billion year old greenstone belt in the Temagami region of Northeastern Ontario, Canada. It represents a feature of the Superior craton, an ancient and stable part of the Earth's lithosphere that forms the core of the North American continent and Canadian Shield. The belt is composed of metamorphosed volcanic rocks that range in composition from basalt to rhyolite. These form the east-northeast trend of the belt and are overlain by metamorphosed sedimentary rocks. They were created during several volcanic episodes involving a variety of eruptive styles ranging from passive lava eruptions to viscous explosive eruptions.

<span class="mw-page-title-main">Igneous rock</span> Rock formed through the cooling and solidification of magma or lava

Igneous rock, or magmatic rock, is one of the three main rock types, the others being sedimentary and metamorphic. Igneous rocks are formed through the cooling and solidification of magma or lava.

<span class="mw-page-title-main">Canadian Cascade Arc</span> Canadian segment of the North American Cascade Volcanic Arc

The Canadian Cascade Arc, also called the Canadian Cascades, is the Canadian segment of the North American Cascade Volcanic Arc. Located entirely within the Canadian province of British Columbia, it extends from the Cascade Mountains in the south to the Coast Mountains in the north. Specifically, the southern end of the Canadian Cascades begin at the Canada–United States border. However, the specific boundaries of the northern end are not precisely known and the geology in this part of the volcanic arc is poorly understood. It is widely accepted by geologists that the Canadian Cascade Arc extends through the Pacific Ranges of the Coast Mountains. However, others have expressed concern that the volcanic arc possibly extends further north into the Kitimat Ranges, another subdivision of the Coast Mountains, and even as far north as Haida Gwaii.

Monte Muambe is a volcanic caldera located south-east of Moatize in Tete Province of Mozambique.

Luingo is a caldera in the Andes of Argentina. It is located southeast of the Galan caldera. The caldera is not recognizable from satellite images and is associated with the Pucarilla-Cerro Tipillas volcanic complex.

The Flat Landing Brook Formation is a geological formation in Gloucester County of northern New Brunswick, Canada. It consists mostly of volcanic rocks that were deposited 466 to 465 million years ago during the Darriwilian stage of the Middle Ordovician epoch.

<span class="mw-page-title-main">Geology of Ascension Island</span>

The geology of Ascension Island is the geologically young, exposed part of a large volcano, 80 kilometers west of the Mid-Atlantic Ridge. The island formed within the last six to seven million years and is primarily mafic rock with some felsic rock.

<span class="mw-page-title-main">Archean felsic volcanic rocks</span> Felsic volcanic rocks formed in the Archean Eon

Archean felsic volcanic rocks are felsic volcanic rocks that were formed in the Archean Eon. The term "felsic" means that the rocks have silica content of 62–78%. Given that the Earth formed at ~4.5 billion year ago, Archean felsic volcanic rocks provide clues on the Earth's first volcanic activities on the Earth's surface started 500 million years after the Earth's formation.

<span class="mw-page-title-main">Keres Group</span> A group of geologic formations in New Mexico

The Keres Group is a group of geologic formations exposed in and around the Jemez Mountains of northern New Mexico. Radiometric dating gives it an age of 13 to 6 million years, corresponding to the Miocene epoch.

<span class="mw-page-title-main">Hannegan caldera</span> Geologic caldera in Washington (state)

Hannegan caldera is a 3.72 million year old volcanic collapse structure in the North Cascades of the U.S. state of Washington. The caldera collapsed during two separate volcanic eruptions that produced as much as 140 km3 of rhyolite ash.

References

  1. 1 2 3 4 "Property Overview". Adex Mining Mount Pleasent Caldera mining overview. Adex Mining Inc. Retrieved 2009-04-16.
  2. 1 2 3 4 5 McCutcheon, S. R.; S. R. McCutcheon; H. E. Anderson; P. T. Robinson (January 1997). "Stratigraphy and eruptive history of the Late Devonian Mount Pleasant Caldera Complex, Canadian Appalachians". Cambridge Geological Magazine. Cambridge University Press. 134 (1): 17–36. doi:10.1017/S0016756897006213. S2CID   129124992 . Retrieved 2009-04-15.
  3. ↑ "Image or region". Archived from the original on 2008-10-24. Retrieved 2009-03-16.
  4. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 "Mount Pleasant Caldera". Geological description of Mount Pleasant Caldera. Canada Department of Natural Resources. 2009. Retrieved 2009-04-15.
  5. ↑ Lipman, P (1999). Encyclopedia of Volcanoes (1 ed.). Academic Press.
  6. 1 2 Yang, Xue-Ming; Lentz, David R.; McCutcheon, Steve R. (July 1, 2003). "Petrochemical evolution of subvolcanic granitoid intrusions within the late Devonian Mount Pleasant Caldera, southwestern New Brunswick, Canada: comparison of Au versus Sn-W-Mo-polymetallic mineralization systems". Atlantic Geology. the Atlantic Geoscience Society. 39 (2). doi: 10.4138/1175 . Retrieved 2009-04-16.
  7. 1 2 3 Xueming Yang; David R. Lentz; Steve R. Mccutcheon; MCLEOD; J. Malcolm (March 27, 2003). "Granitic Intrusions Of the Mount Pleasant Caldera, Southwestern New Brunswick: Petrochemical Characteristics and Implications for Gold Mineralization". The Geological Society of America. Retrieved 2010-06-07.
  8. 1 2 Lafontaine, Jonathan (2005). "Report on the UNB SEG Student Chapter field trip to Intrusion-related deposits of southern New Brunswick" (PDF). Society of Economic Geologists. Archived from the original (PDF) on 2011-05-25. Retrieved 2009-04-16.
  9. ↑ "Geodex Announces Base Metal, Tin and Indium assays from four prospects in the Mount Pleasant Camp, New Brunswick" (PDF). Geodex Minerals Ltd. June 25, 2008. Retrieved 2019-05-14.
  10. ↑ "Mount Pleasant may see mining activity again". CBC News. June 16, 2011. Retrieved 2013-12-25.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.