Norfolk and Western J class (1941)

Last updated
Norfolk and Western J class (1941)
Norfolk and Western Railway class J No. 600 (cropped).jpg
Norfolk and Western No. 600, the first of the class
Type and origin
Power typeSteam
DesignerH.W. Reynolds
G.P. McGavock
C.H. Faris
Franklin C. Noel
Builder Roanoke Shops
Build date1941–1950
Total produced14
Specifications
Configuration:
   Whyte 4-8-4
   UIC 2′D2′ h2
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Leading dia. 36 in (914 mm)
Driver dia.70 in (1,778 mm)
Trailing dia. 42 in (1,067 mm)
Length109 ft 2 in (33.27 m)
Width11 ft 2 in (3.40 m)
Height16 ft 0 in (4.88 m)
Axle load 72,000 lb (32,658.7 kilograms; 32.7 tonnes) for drivers
Adhesive weight 288,000 lb (130.6 tonnes)
Loco weight494,000 lb (224.1 tonnes)
Tender weight378,600 lb (171.7 tonnes)
Total weight872,600 lb (395.8 tonnes)
Fuel type Coal
Fuel capacity35 short tons (70,000 lb), originally 26 short tons (52,000 lb) (Nos. 600-610)
Water cap.20,000 US gal (76,000 L; 17,000 imp gal), originally 22,000 US gal (83,000 L; 18,000 imp gal) (Nos. 600-610)
Fuel consumption6.5 short tons (5.9 t) of coal per hour
11,975 US gal (45,330 L; 9,971 imp gal) of water per hour
Firebox:
  Grate area107.7 sq ft (10.01 m2)
Boiler92 in (2,337 mm) (front)
102 in (2,591 mm) (back)
Boiler pressure300 psi (2.07 MPa), originally 275 psi (1.90 MPa) (Nos. 600-610)
Feedwater heater Worthington Type 6-SA
12,000 gal/hr capacity
Heating surface:
  Firebox578 sq ft (53.7 m2)
  Tubes2.25 in (57 mm)
  Flues3.5 in (89 mm)
  Tubes and flues4,693 sq ft (436.0 m2)
  Total surface5,271 sq ft (489.7 m2)
Superheater:
  TypeElesco Type E
  Heating area2,177 sq ft (202.2 m2)
Cylinders Two
Cylinder size 27 in × 32 in (686 mm × 813 mm)
Valve gear Baker
Valve type Piston valves 14-inch (356 mm), 8.5-inch (216 mm) travel
Performance figures
Maximum speed110 mph (177 km/h)
Power output5,100 hp (3,800 kW) @ tender drawbar
Tractive effort 80,000 lbf (355.86 kN)
Factor of adh. 3.6
Career
OperatorsNorfolk and Western Railway
Class J (3rd)
Number in class14
Numbers600–613
Retired1958–1959
DispositionOne preserved, remainder scrapped
References: [1] [2]

The Norfolk and Western J class was a class of 14 4-8-4 "Northern" streamlined steam locomotives built by the Norfolk and Western Railway (N&W) at its Roanoke Shops in Roanoke, Virginia, between 1941 and 1950. The most powerful 4-8-4 locomotives ever produced, the J class were part of the N&W's "Big Three" (along with the class A and Y6 freight locomotives) that represented the pinnacle of steam technology.

Contents

They were built to pull the Powhatan Arrow , the Pocahontas, and the Cavalier passenger trains on the N&W main line between Norfolk, Virginia, and Cincinnati, Ohio; they also ferried the Southern Railway's Birmingham Special , Pelican , and Tennessean between Monroe and Bristol, Virginia, until these trains were taken over by diesel locomotives in the summer of 1958. The class J locomotives were subsequently reassigned to haul local freight trains; all but one were retired and scrapped by the end of October 1959.

The lone exception was No. 611, which was donated to the Virginia Museum of Transportation (VMT) in 1962. It has been restored twice: once as part of the Norfolk Southern Railway's steam program in 1982, and again as part of the VMT's Fire up 611! campaign in 2015.

History

Background and concept

A drawing design of the N&W class J locomotive Norfolk and Western class J drawing.jpg
A drawing design of the N&W class J locomotive

In the late 1930s, the Norfolk and Western Railway's (N&W) K2 and K2a 4-8-2 "Mountains" could not handle the rising passenger traffic after the Great Depression abated, so the N&W sought a more powerful and fancy-looking passenger steam locomotive. [3] [4] The N&W mechanical department team originally considered a class N 4-8-4 type, but deemed its 63 in (1,600 mm) driving wheels inadequate for the N&W's railway grades. [3] [5] N&W mechanical engineer H.W. Reynolds redesigned the drivers' diameter to a 70 in (1,778 mm) design that could be counterbalanced against wheel slippage. [3] [6] In 1940, N&W passenger car supervisor Franklin C. Noel originally drew a design, which was based on the Southern Pacific GS class, but the N&W officials rejected it to be "too plain". [7] [8] Noel reproposed the design with an almost similar specification to the streamlined New York Central Hudson, but was rejected again for being "too fancy". [7] [8] On the third and final concept, Noel developed the class J bullet-nosed design to give the locomotive smoothness and beauty along with speed, power, and dependability. [3] [7] His wife Louise suggested painting the locomotive black with a Tuscan red stripe wrapped with golden yellow linings and letterings. [3] [9] The N&W officials were satisfied with the final design and considered it to be the most beautiful streamlined steam locomotive ever. [7]

Construction and design

A close-up of No. 611's running gear in 2023. Norfolk and Western 611 Running Gear.jpg
A close-up of No. 611's running gear in 2023.

In the summer of 1941, the first of the J class, No. 600 was constructed at the N&W's Roanoke (East End) Shops in Roanoke, Virginia, and completed on October 20. [11] It sported a streamlined pilot with a retractable coupler that could horizontally swing out, a bullet-shaped nose with an enclosed headlight mounted into the nose, and a skyline casing that encased the smokestack, sand dome, steam dome, bell, whistle, and safety valves on top of the boiler. [9] Among the running boards, there was a broad skirting mounted from the cab and firebox sides forward over the cylinders, then narrowing as turned into the pilot. [9] The class J tender is a 22D-type, which holds 26 short tons (52,000 lb) of coal and 22,000 US gallons (83,000 L) of water. [12] No. 600 was equipped with Timken roller bearings and lightweight reciprocating parts on it axles, rods, pistons, crossheads, valve gear, and wrist pins, which provided the locomotive a smooth run and quicker acceleration. [9]

The Roanoke Shops built four more locomotives; No. 601 on November 17; No. 602 on December 8; No. 603 on December 24; and No. 604 on January 27, 1942. [13] [14] No. 602 was equipped with a trailing truck booster, which increased starting tractive effort from 73,300 lbf (326.05 kN) up to 85,800 lbf (381.66 kN). [14] In December 1945, No. 602's booster was removed for easier maintenance. [15] The result was an increase in the starting tractive effort of the main engine to 80,000 lbf (355.86 kN) (rendering the booster on No. 602 superfluous), and an increase in maximum drawbar horsepower from 4,700 hp (3,500 kW) to 5,100 hp (3,800 kW) at 40 mph (64 km/h). [16] Nos. 600–604 cost the N&W $167,000 apiece. [3]

The second batch of six locomotives, Nos. 605–610, was delivered in 1943 at a cost of $168,550 each without streamlined casings and lightweight side rods, due to the limitations on the use of certain materials during the war; classifying them as the J1s. [17] [18] In 1944, the N&W were allowed to reclassified the J1s as Js with the lightweight rods and streamlined shrouding added. In 1950, N&W built the last three locomotives, Nos. 611-613, on May 29, June 27, and July 24, respectively. [19] Additionally, they were marked as the last mainline steam passenger locomotives built in the United States. [20]

In the mid-1950s, N&W engineers replaced the duplex (two) coupling rods between the main (second) and third drivers (tandem rods) on Nos. 600, 604, 607, and 611 with a single coupling rod. [21] Additionally, all of the J class locomotives' streamlined front end, underneath the bullet nose, was given access holes to give ventilation for the cross-compound air pumps from behind. [19] The class J locomotives were built with automatic lubricators at 220 points, allowing them to operate up to 1,300 miles (2,100 km) between refills. [1]

The driving wheels were small for a locomotive that was able to pull trains at more than 100 mph (160 km/h). [1] To overcome the limitation, the wheelbase was made extremely rigid, lightweight rods were used, and the counterbalancing was precise – so precise that it could theoretically allow the locomotives to reach speeds up to 140 mph (230 km/h) without the rail damage that could have occurred with conventional designs. [1] One drawback of this highly engineered powertrain was sensitivity to substandard track. [1]

Table of orders and numbers [22] [23]
QuantitySerial Nos.Year builtN&W No.Tender No.Notes
5311–3151941–1942600–604220076-220080Built with multiple-bearing crossheads and originally built with spoke pilot wheels. Re-equipped with solid steel pilot wheels in the 1950s. [21]
6347–3521943605–610220112-220117Built with alligator crossheads and originally built with spoke pilot wheels and without streamlining shrouds. [18] Re-equipped with solid steel pilot wheels in the 1950s. [21]
3388–3901950611–613220165-220167Built with alligator crossheads and solid steel pilot wheels. No. 611 in excursion service. [24]

Testing and trial

While on loan between late 1944 and early 1945, No. 610 made twelve round trip runs, hauling a 1,015-ton passenger train with 11 to 15 cars at speeds of more than 110 mph (180 km/h) between Chicago, Illinois and Crestline, Ohio on the Pennsylvania Railroad's Fort Wayne Division. [25] [26] It even made two trips in freight service. [26] On August 6, 1945, N&W used No. 604 for testing with a dynamometer car and fifteen cars, running from Roanoke to Walton, and back. [27] After the testing, it was decided that all of the class J locomotives would have their boiler pressure raised from the original 275 psi (1.90 MPa) to 300 psi (2.07 MPa) by fall of 1945. [16]

Despite their comparatively small driving wheels, they rode very smoothly at all speeds: the Pennsylvania Railroad's inspector stated that it rode better than any of their own steam locomotives except for the 6-4-4-6 class S1. They also steam very well due to the large grate. [26]

Revenue service

The class J locomotives pulled the N&W's prominent passenger trains, such as the Powhatan Arrow, the Pocahontas, and the Cavalier between Norfolk and Cincinnati, as well as ferrying the Southern Railway's (SOU) Birmingham Special, Pelican, and Tennessean passenger trains between Lynchburg and Bristol, Virginia. [1] [28] Because of their power and speed, the class Js were among the most reliable and efficient engines, running as many as 15,000 miles (24,000 km) per month, even on the mountainous and relatively short route of the N&W. [1] They also hauled additional mail trains and local passenger trains. [28] [29] Additionally, while pulling N&W's mainline passenger trains each month, the class J locomotives would take in turns to swap each other out in Roanoke and go to the Shaffers Crossing engine terminal for maintenance service and a washdown. [30] [31] They can haul passenger trains from Roanoke to Cincinnati without locomotive change at a distance of 423 miles (681 km). [32]

During 1941, No. 600 was put on public display: at Bristol on October 25; Winston-Salem, North Carolina, on October 27; Lynchburg on October 28, and Durham, North Carolina, on October 29. [33] [34] No. 600 made its first revenue runs in early November, pulling the Cavalier and Pocahontas passenger trains, including SOU's Tennessean and Birmingham Special. [35] [36] On the same month, No. 601 entered service pulling the Tennessean and Birmingham Special trains. [37] No. 603 entered service on December 26, 1941; it pulled local passenger trains between Roanoke and Bristol for testing before being assigned to haul the Pocahontas and Cavalier express passenger trains. [14] On April 28, 1946, the class J locomotives became the main motive powers of the N&W's brand-new Powhatan Arrow passenger train. [38] [39]

Retirement

Around February and early March 1958, their tenders' rear decks were outfitted with a cupola to accommodate the head-end brakeman. [40] [41] In the summer of 1958, N&W's new president Stuart T. Saunders began to dieselize the railroad, ordering 268 GP9 locomotives from Electro-Motive Diesel (EMD). [42] However, Saunders did not receive the passenger GP9s and instead leased an E6A and four E7 units from the Atlantic Coast Line along with four E8 units Richmond, Fredericksburg and Potomac Railroad to replace the class J steam locomotives in passenger service. [42] [43] The class Js were reassigned to local freight service on the Norfolk Division, running between Norfolk and Crewe, Virginia. [44] When the ACL E units returned to their railroad to handle heavy winter traffic in Florida, some of the class J locomotives briefly returned to passenger service until being replaced by N&W's new passenger GP9s, which arrived in late 1958. [42] Some of them continued to haul freight trains until their five-year boiler flue ticket certificate expired. [44] [40]

N&W J class locomotive retirement details [40]
Nos.Retirement dateDisposition
600June 16, 1959Scrapped at M.D. Friedman in Portsmouth, Ohio [45]
601March 27, 1959Scrapped at M.D. Friedman in Portsmouth, Ohio [45]
602January 8, 1959Scrapped in Roanoke, Virginia
603April 24, 1959Scrapped in Bluefield, West Virginia
604October 24, 1958Scrapped at Shaffers Crossing, Roanoke, Virginia
605June 15, 1959Scrapped in Williamson, West Virginia
606May 22, 1959Scrapped in Bluefield, West Virginia
607February 25, 1959Scrapped at Shaffers Crossing, Roanoke, Virginia
608May 22, 1959Scrapped in Bluefield, West Virginia
609May 22, 1959Scrapped in Bluefield, West Virginia
610August 21, 1959Scrapped in Crewe, Virginia
611October 27, 1959Preserved at the Virginia Museum of Transportation in Roanoke, Virginia
612August 21, 1959Scrapped at Lambert's Point, Norfolk, Virginia
613March 27, 1959Scrapped at M.D. Friedman in Portsmouth, Ohio, in July 1959

Accidents and incidents

Preservation

N&W 611, the sole remaining J class locomotive, on display at the Virginia Museum of Transportation in December 2016 Norfolk and Western Railway No. 611 in December 2016.jpg
N&W 611, the sole remaining J class locomotive, on display at the Virginia Museum of Transportation in December 2016

Only one locomotive, No. 611, has been preserved. [24] Its survival was in part due to its excellent condition after its 1956 derailment and subsequent repair, and also in part to the efforts of attorney and railfan W. Graham Claytor Jr., who requested the locomotive to be salvaged from the scrap line. [49] During final revenue run in late 1959, it pulled three sponsored excursions from the Appalachian Power Company, the Washington Chapter of the National Railway Historical Society, and the Rail Museum Safari. [50] [51] [52] The No. 611 locomotive was donated to the Virginia Museum of Transportation (VMT) in 1963, where it sat on static display for two decades. [24] [49] Since then, it has had two excursion careers: from 1982 to 1994, after Norfolk Southern Railway restored the locomotive, and from 2015 onwards with the VMT. [24]

See also

Notes

  1. Most of the running gear's components came from sister locomotive No. 605. [10]

Related Research Articles

<span class="mw-page-title-main">Virginian Railway</span> Defunct American railroad

The Virginian Railway was a Class I railroad located in Virginia and West Virginia in the United States. The VGN was created to transport high quality "smokeless" bituminous coal from southern West Virginia to port at Hampton Roads.

<span class="mw-page-title-main">Norfolk and Western Railway</span> Former US Class I railroad (1838–1982)

The Norfolk and Western Railway, commonly called the N&W, was a US class I railroad, formed by more than 200 railroad mergers between 1838 and 1982. It was headquartered in Roanoke, Virginia, for most of its existence. Its motto was "Precision Transportation"; it had a variety of nicknames, including "King Coal" and "British Railway of America". In 1986, N&W merged with Southern Railway to form today's Norfolk Southern Railway.

A 2-8-8-2, in the Whyte notation for describing steam locomotive wheel arrangements, is an articulated locomotive with a two-wheel leading truck, two sets of eight driving wheels, and a two-wheel trailing truck. The equivalent UIC classification is, refined to Mallet locomotives, (1'D)D1'. These locomotives usually employ the Mallet principles of articulation—with the rear engine rigidly attached to the boiler and the front engine free to rotate—and compounding. The 2-8-8-2 was a design largely limited to American locomotive builders. The last 2-8-8-2 was retired in 1962 from the N&W's roster, two years past the ending of steam though steam was still used on steel mill lines and other railroads until 1983.

<span class="mw-page-title-main">Roanoke Shops</span> Railway workshops in Roanoke, Virginia

The Roanoke Shops is a railroad workshop and maintenance facility in Roanoke, Virginia. Between 1884 and 1953, the shops produced 447 steam locomotives, all for the Norfolk and Western Railway (N&W). The Roanoke Shops built the N&W's famous Big Three class steam locomotives; the 4-8-4 class J, the 2-6-6-4 class A, and the 2-8-8-2 class Y6. In late 1953, the Shops built their final steam locomotive, making it last standard gauge steam locomotive built for revenue service in the United States. In 2020, N&W's successor, Norfolk Southern abandoned the Shops and Genesis Rail Services leased the property in July 2023.

<span class="mw-page-title-main">Southern Railway 4501</span> Preserved American Ms class 2-8-2 steam locomotive

Southern Railway 4501 is a preserved Ms class 2-8-2 "Mikado" type steam locomotive built in October 1911 by the Baldwin Locomotive Works in Philadelphia, Pennsylvania, as the first of its wheel arrangement type for the Southern Railway (SOU). In 1948, the locomotive was retired from the Southern Railway in favor of dieselization and was subsequently sold to the shortline Kentucky and Tennessee Railway (K&T) in Stearns, Kentucky, to haul coal trains.

<i>Pocahontas</i> (train)

The Pocahontas was a named overnight passenger train, operated by the Norfolk and Western Railway (N&W) in the United States. It made its inaugural operation on November 21, 1926, with two trains; Nos. 3 and 4, which both ran 676 miles (1,088 km) daily at night on the N&W mainline between Norfolk, Virginia, and Cincinnati, Ohio, with a through-connection to and from Chicago, Illinois. The Pocahontas replaced an earlier passenger train called the Norfolk-Chicago Express, which bears the same train numbers.

<i>Powhatan Arrow</i>

The Powhatan Arrow was a named flagship passenger train operated by the Norfolk and Western Railway (N&W) in the United States. Debuting on April 28, 1946, the daily westbound No. 25 and the eastbound No. 26 connected Norfolk, Virginia, and Cincinnati, Ohio, covering 676 miles (1,088 km) in about 15 hours and 45 minutes behind streamlined 4-8-4 class J steam locomotives.

<span class="mw-page-title-main">Virginia Museum of Transportation</span> Transport museum in Roanoke, Virginia

The Virginia Museum of Transportation (VMT) is a museum in Downtown Roanoke, Virginia, that is devoted to the topic of transportation.

<span class="mw-page-title-main">Norfolk and Western 475</span> Preserved N&W class M 4-8-0 locomotive

Norfolk and Western 475 is a 4-8-0 "Twelve-wheeler" type steam locomotive built by the Baldwin Locomotive Works in June 1906 as part of the Norfolk and Western Railway's (N&W) first order of M class numbered 375–499. It was first assigned to haul freight trains on the N&W mainline before being reassigned to branch line duties on the Blacksburg Branch in the 1920s.

<span class="mw-page-title-main">Norfolk and Western 1218</span> Preserved N&W class A locomotive

Norfolk and Western 1218 is a preserved four-cylinder simple articulated 2-6-6-4 steam locomotive, built in June 1943 by the Norfolk and Western's (N&W) Roanoke Shops in Roanoke, Virginia as part of the N&W's class "A" fleet of fast freight locomotives. It was retired from regular revenue service in July 1959, and was later restored by Norfolk Southern for excursion service for their steam program, pulling excursions throughout the eastern United States from 1987 to 1991. It is currently on display at the Virginia Museum of Transportation in Roanoke, Virginia.

<span class="mw-page-title-main">Norfolk and Western 2156</span> Preserved N&W Y6a class 2-8-8-2 locomotive

Norfolk and Western 2156 is a preserved Y6a class 2-8-8-2 compound Mallet steam locomotive. The Norfolk and Western Railway (N&W) built it in 1942 at its own Shops in Roanoke, Virginia as the second member of the N&W's Y6a class. No. 2156 and its class are considered to be the world's strongest-pulling extant steam locomotive to ever be built.

<span class="mw-page-title-main">Norfolk and Western 611</span> Preserved American 4-8-4 steam locomotive based in Virginia

Norfolk and Western 611, also known as the "Spirit of Roanoke" and the "Queen of Steam", is the only surviving example of Norfolk and Western's (N&W) class J 4-8-4 type "Northern" streamlined steam locomotives. Built in May 1950 at N&W's Roanoke Shops in Roanoke, Virginia, it was one of the last main line passenger steam locomotives built in the United States and represents a pinnacle of American steam locomotive technology.

<span class="mw-page-title-main">Nickel Plate Road 759</span> Preserved NKP S-2 class 2-8-4 locomotive

Nickel Plate Road 759 is a class "S-2" 2-8-4 "Berkshire" type steam locomotive built in 1944 by the Lima Locomotive Works in Lima, Ohio as a member of the S-2 class for the New York, Chicago & St. Louis Railroad, commonly referred to as the "Nickel Plate Road". Built as a fast freight locomotive, No. 759 served the Nickel Plate until being retired in 1959 and placed into storage. In 1965, No. 759 was purchased by F. Nelson Blount for display in his Steamtown, U.S.A. collection in North Walpole, New Hampshire. The locomotive was restored to operating condition in 1967 by New York commodity broker Ross Rowland for use in hauling his Golden Spike Centennial Limited, a special commemorative train that celebrated the 100th anniversary of the completion of the Transcontinental Railroad in 1969. Afterwards, No. 759 pulled numerous excursions for Ross Rowland and Steamtown until being retired once more and placed back on display in 1977. As of 2023, the locomotive remains on static display at the Steamtown National Historic Site in Scranton, Pennsylvania, and sibling engine No. 765 continues to operate in mainline excursion service.

The 21st Century Steam program was conducted by the Norfolk Southern Railway from 2011 to 2015, featuring four classic steam locomotives pulling passenger excursions along Norfolk Southern rails in the eastern United States. The last train was to be Southern 4501's Piedmont Limited excursion trip from Atlanta, Georgia, to Toccoa, Georgia, but cancelled on October 1 due to Hurricane Joaquin.

<span class="mw-page-title-main">Norfolk and Western A class</span>

The Norfolk and Western A was a class of 43 2-6-6-4 simple articulated steam locomotives built by the railroad's own Roanoke Shops between 1936 and 1950 and operated until the late 1950s. The locomotives hauled fast and heavy freight trains for the railroad and only one has been preserved, No. 1218.

<span class="mw-page-title-main">Norfolk and Western 578</span> Preserved N&W Class E2a 4-6-2 locomotive


Norfolk and Western 578 is a preserved 4-6-2 "Pacific" type steam locomotive. Built by ALCO's Richmond Works in 1910, No. 578 was assigned to pull premiere passenger trains for the Norfolk and Western Railway before it was downgraded to secondary passenger service. It was retired from revenue service altogether in 1958, and it was subsequently donated to the Ohio Railway Museum in Worthington, Ohio. The Ohio Railway Museum used No. 578 to pull some tourist trains on their trackage, until it was sidelined as a result of mechanical problems in the early 1970s. As of 2023, No. 578 remains on static display next to the Ohio Railway Museum's depot.

<span class="mw-page-title-main">Norfolk and Western 2174</span> Scrapped N&W Y-6b class 2-8-8-2 locomotive

Norfolk and Western 2174 was a Y6b class 2-8-8-2 compound Mallet steam locomotive, built by the Norfolk and Western Railway's (N&W) own Roanoke Shops, in 1948. No. 2174 and the other Y6bs were notably some of the most powerful steam locomotives ever built, being able to pull heavy freight and coal trains, unassisted. They were also some of the last steam locomotives ever built in the United States.

<span class="mw-page-title-main">Cedar train wreck</span> 1956 train wreck in Cedar, West Virginia

The Cedar train wreck occurred on the night of January 23, 1956, when the Norfolk and Western (N&W) Pocahontas passenger train derailed at more than 50 mph (80 km/h) along the Tug River near Cedar, West Virginia. The accident killed the engineer and injured 51 passengers and nine crew members. It was the last major wreck of a steam-powered revenue passenger train in the United States.

<span class="mw-page-title-main">Great Dismal Swamp train derailment</span> 1986 train derailment in Suffolk, Virginia

The Great Dismal Swamp train derailment occurred on the afternoon of May 18, 1986, when a special Norfolk Southern employee passenger train derailed at the Great Dismal Swamp near Suffolk, Virginia. The accident injured 177 passengers; 18 were seriously injured and need to be airlifted to nearby hospitals in Norfolk, Virginia. The train was pulled by Norfolk and Western 611, a class J 4-8-4 steam locomotive, which was restored to operating condition for excursion service in 1982.

<span class="mw-page-title-main">Southern Railway 1380</span> Streamlined American 4-6-2 steam locomotive

Southern Railway 1380 is a streamlined 4-6-2 steam locomotive built in 1923 by American Locomotive Company (ALCO) of Schenectady, New York, for the Southern Railway (SOU) as a member of the Ps-4 class, which was based on the United States Railroad Administration (USRA) Heavy Pacific design with some minor differences. Redesigned in a Streamline Moderne style design by industrial designer Otto Kuhler in 1941, No. 1380 hauled SOU's streamlined Tennessean passenger train between Washington, D.C., and Monroe, Virginia, until it was removed from the train in the late 1940s and scrapped around 1953.

References

  1. 1 2 3 4 5 6 7 8 9 10 "N&W 611 Class J Steam Locomotive National Historic Mechanical Engineering Landmark". American Society of Mechanical Engineers . May 1984. Archived from the original on October 3, 2017. Retrieved January 6, 2018.
  2. Jeffries (1980), p. 326.
  3. 1 2 3 4 5 6 Hensley & Miller (2021) , p. 4.
  4. Jeffries (1980) , p. 228.
  5. Withuhn (2019) , p. 395.
  6. Withuhn (2019) , pp. 283–284.
  7. 1 2 3 4 Jeffries (1980) , p. 229.
  8. 1 2 Miller (2000) , pp. 15–16.
  9. 1 2 3 4 Jeffries (1980) , p. 230.
  10. Wrinn, Jim (2015). "Bringing back the J". Trains. No. 2. Kalmbach Media. p. 9.
  11. Miller (2000) , p. 17.
  12. Hensley & Miller (2021) , p. 8.
  13. Miller (2000) , pp. 24–25.
  14. 1 2 3 Miller (2000) , pp. 33–34.
  15. Miller (2000) , pp. 38–39.
  16. 1 2 Miller (2000) , p. 68.
  17. Rosenburg & Archer (1973) , p. 73.
  18. 1 2 Hensley & Miller (2021) , p. 17.
  19. 1 2 Miller (2000) , pp. 83–85.
  20. Drury (2015) , p. 259.
  21. 1 2 3 Hensley & Miller (2021) , p. 19.
  22. Drury (2015) , p. 261.
  23. Rosenburg & Archer (1973) , p. 68.
  24. 1 2 3 4 "N&W Class J 611". Trains . Kalmbach Media. Archived from the original on January 28, 2023. Retrieved February 14, 2023.
  25. Miller (2000) , p. 69.
  26. 1 2 3 Rhodes, John T.; Stephenson, David R. (September 2013). "Steam Locomotive Rail Wheel Dynamics Part 1: Precedent Speed of Steam Locomotives" (PDF). Coalition for Sustainable Rail. Archived from the original (PDF) on August 1, 2021. Retrieved May 14, 2022.
  27. Miller (2000) , p. 66.
  28. 1 2 McClure, III & Plant (2007) , p. 18.
  29. Miller (2000) , p. 87.
  30. Miller (2000) , pp. 53–58.
  31. Nichols (1997) , pp. 32–33.
  32. Jeffries (1980) , p. 238.
  33. Miller (2000) , p. 21.
  34. Miller (2000) , pp. 27–28.
  35. Miller (2000) , p. 22.
  36. Miller (2000) , pp. 29–30.
  37. Warden & Miller (2000) , p. 127.
  38. Dixon, Jr. (2009) , p. 9
  39. Miller (2000) , pp. 76–77.
  40. 1 2 3 Miller (2000) , p. 111.
  41. "From the Archives" (PDF). The Arrow. Vol. 37, no. 7. Norfolk and Western Historical Society. October–December 2021. p. 5. Archived from the original (PDF) on March 6, 2023. Retrieved August 7, 2023.
  42. 1 2 3 Hensley & Miller (2021) , pp. 24–29.
  43. Nichols (1997) , pp. 28–29.
  44. 1 2 Hensley & Miller (2021) , p. 26-28.
  45. 1 2 Hensley & Miller (2021) , p. 31.
  46. 1 2 3 4 5 Dixon, Jr. (2009) , p. 17
  47. 1 2 Interstate Commerce Commission Report No. 3538 – October 30, 1953. Interstate Commerce Commission (Report). November 24, 1953. Archived from the original on July 11, 2024. Retrieved August 20, 2024.
  48. "Derailment of Steam Excursion Train Norfolk and Western Railway Company Train Extra 611". NTSB.gov. National Transportation Safety Board. May 18, 1986. Archived from the original on October 17, 2020. Retrieved June 29, 2020.
  49. 1 2 Miller (2000) , pp. 121–122.
  50. Hensley & Miller (2021) , pp. 42–44.
  51. Miller (2000) , pp. 113–115.
  52. Warden (1987) , p. 12.

Bibliography