Steam hammer

Last updated
Steam hammer
Dampfhammer2 brockhaus.jpg
1894 illustration of various sizes of single- and double-frame steam hammer
IndustryMetal working
ApplicationForging, pile driving, riveting etc.
Fuel sourceWood or coal
Inventor François Bourdon, James Nasmyth
Invented1839
A single-frame steam drop hammer in use at the Atchison, Topeka and Santa Fe Railway shops in Topeka, Kansas, 1943 Blacksmith shop, railroad, Topeka.jpg
A single-frame steam drop hammer in use at the Atchison, Topeka and Santa Fe Railway shops in Topeka, Kansas, 1943

A steam hammer, also called a drop hammer, is an industrial power hammer driven by steam that is used for tasks such as shaping forgings and driving piles. Typically the hammer is attached to a piston that slides within a fixed cylinder, but in some designs the hammer is attached to a cylinder that slides along a fixed piston.

Contents

The concept of the steam hammer was described by James Watt in 1784, but it was not until 1840 that the first working steam hammer was built to meet the needs of forging increasingly large iron or steel components. In 1843 there was an acrimonious dispute between François Bourdon of France and James Nasmyth of Britain over who had invented the machine. Bourdon had built the first working machine, but Nasmyth claimed it was built from a copy of his design.

Steam hammers proved to be invaluable in many industrial processes. Technical improvements gave greater control over the force delivered, greater longevity, greater efficiency and greater power. A steam hammer built in 1891 by the Bethlehem Iron Company delivered a 125-ton blow. In the 20th century steam hammers were gradually displaced in forging by mechanical and hydraulic presses, but some are still in use. Compressed air power hammers, descendants of the early steam hammers, are still manufactured.

Mechanism

A single-acting steam hammer is raised by the pressure of steam injected into the lower part of a cylinder and drops under gravity when the pressure is released. With the more common double-acting steam hammer, steam is also used to push the ram down, giving a more powerful blow at the die. [1] The weight of the ram may range from 225 to 22,500 kg (500 to 50,000 lb). [2] The piece being worked is placed between a bottom die resting on an anvil block and a top die attached to the ram (hammer). [3]

Hammers are subject to repeated concussion, which could cause fracturing of cast iron components. The early hammers were therefore made from a number of parts bolted together.

This made it cheaper to replace broken parts, and also gave it a degree of elasticity that made fractures less likely. [4]

A single-frame double-acting steam hammer Steam hydraulic hammer (Rankin Kennedy, Modern Engines, Vol VI).jpg
A single-frame double-acting steam hammer

A steam hammer may have one or two supporting frames. The single frame design lets the operator move around the dies more easily, while the double frame can support a more powerful hammer. The frame(s) and the anvil block are mounted on wooden beams that protect the concrete foundations by absorbing the shock. [3]

Deep foundations are needed, but a large steam drop hammer will still shake the building that holds it. This may be solved with a counterblow steam hammer, in which two converging rams drive the top and bottom dies together. The upper ram is driven down and the lower ram is pulled or driven up. These hammers produce a large impact and can make large forgings. [5] They can be installed with smaller foundations than anvil hammers of similar force. [6] Counterblow hammers are not often used in the United States, but are common in Europe. [7]

With some early steam hammers an operator moved the valves by hand, controlling each blow. With others the valve action was automatic, allowing for rapid repetitive hammering. Automatic hammers could give an elastic blow, where steam cushioned the piston towards the end of the down stroke, or a dead blow with no cushioning. The elastic blow gave a quicker rate of hammering, but less force than the dead blow. [8] Machines were built that could run in either mode according to the job requirement. [9] The force of the blow could be controlled by varying the amount of steam introduced to cushion the blow. [10] A modern air/steam hammer can deliver up to 300 blows per minute. [11]

History

James Watt (1736-1819) described the concept of a steam hammer James Watt by Henry Howard.jpg
James Watt (1736–1819) described the concept of a steam hammer

Concept

The possibility of a steam hammer was noted by James Watt (1736–1819) in his 28 April 1784 patent for an improved steam engine. [12] Watt described "Heavy Hammers or Stampers, for forging or stamping iron, copper, or other metals, or other matters without the intervention of rotative motions or wheels, by fixing the Hammer or Stamper to be so worked, either directly to the piston or piston rod of the engine." [13] Watt's design had the cylinder at one end of a wooden beam and the hammer at the other. The hammer did not move vertically, but in the arc of a circle. [14] On 6 June 1806 W. Deverell, engineer of Surrey, filed a patent for a steam-powered hammer or stamper. The hammer would be welded to a piston rod contained in a cylinder. Steam from a boiler would be let in under the piston, raising it and compressing the air above it. The steam would then be released and the compressed air would force the piston down. [13]

1899 Drawing of Steam Hammer Annual, 1899 (May) - DPLA - 14ca89cfa3717f287f4fd0a902420297 (page 54) (cropped).jpg
1899 Drawing of Steam Hammer

In August 1827 John Hague was awarded a patent for a method of working cranes and tilt-hammers driven by a piston in an oscillating cylinder where air power supplied the motive force. A partial vacuum was made in one end of a long cylinder by an air pump worked by a steam engine or some other power source, and atmospheric pressure drove the piston into that end of the cylinder. When a valve was reversed, the vacuum was formed in the other end and the piston forced in the opposite direction. [15] Hague made a hammer to this design for planishing frying pans. Many years later, when discussing the advantages of air over steam for delivering power, it was recalled that Hague's air hammer "worked with such an extraordinary rapidity that it was impossible to see where the hammer was in working, and the effect was seemed more like giving one continuous pressure." However, it was not possible to regulate the force of the blows. [16]

Invention

The Nasmyth steam hammer PSM V38 D349 The nasmyth steam hammer.jpg
The Nasmyth steam hammer

It seems probable that the Scottish Engineer James Nasmyth (1808–1890) and his French counterpart François Bourdon (1797–1865) reinvented the steam hammer independently in 1839, both trying to solve the same problem of forging shafts and cranks for the increasingly large steam engines used in locomotives and paddle boats. [17] In Nasmyth's 1883 "autobiography", written by Samuel Smiles, he described how the need arose for a paddle shaft for Isambard Kingdom Brunel's new transatlantic steamer SS Great Britain , with a 30 inches (760 mm) diameter shaft, larger than any that had been previously forged. He came up with his steam hammer design, making a sketch dated 24 November 1839, but the immediate need disappeared when the practicality of screw propellers was demonstrated and the Great Britain was converted to that design. Nasmyth showed his design to all visitors. [18]

Bourdon came up with the idea of what he called a "Pilon" in 1839 and made detailed drawings of his design, which he also showed to all engineers who visited the works at Le Creusot owned by the brothers Adolphe and Eugène Schneider. [18] However, the Schneiders hesitated to build Bourdon's radical new machine. Bourdon and Eugène Schneider visited the Nasmyth works in England in the middle of 1840, where they were shown Nasmyth's sketch. This confirmed the feasibility of the concept to Schneider. [17] In 1840 Bourdon built the first steam hammer in the world at the Schneider & Cie works at Le Creusot. It weighed 2,500 kilograms (5,500 lb) and lifted to 2 metres (6 ft 7 in). The Schneiders patented the design in 1841. [19]

Nasmyth visited Le Creusot in April 1842. By his account, Bourdon took him to the forge department so he might, as he said, "see his own child". Nasmyth said "there it was, in truth–a thumping child of my brain!" [18] After returning from France in 1842 Nasmyth built his first steam hammer in his Patricroft foundry in Manchester, England, adjacent to the (then new) Liverpool and Manchester Railway and the Bridgewater Canal. [20] In 1843 a dispute broke out between Nasmyth and Bourdon over priority of invention of the steam hammer. Nasmyth, an excellent publicist, managed to convince many people that he was the first. [21]

Early improvements

Nasmyth & Wilson steam hammer at the University of Bolton Steam hammer, Bolton University - geograph.org.uk - 1741851.jpg
Nasmyth & Wilson steam hammer at the University of Bolton

Nasmyth's first steam hammer, described in his patent of 9 December 1842, was built for the Low Moor Works at Bradford. They rejected the machine, but on 18 August 1843 accepted an improved version with a self-acting gear. [22] Robert Wilson (1803–1882), who had also invented the screw propeller and was manager of Nasmyth's Bridgewater works, invented the self-acting motion that made it possible to adjust the force of the blow delivered by the hammer – a critically important improvement. [23] An early writer said of Wilson's gear, "... I would be prouder to say that I was the inventor of that motion, then to say I had commanded a regiment at Waterloo..." [22] Nasmyth's steam hammers could now vary the force of the blow across a wide range. Nasmyth was fond of breaking an egg placed in a wineglass without breaking the glass, followed by a blow that shook the building. [20]

By 1868 engineers had introduced further improvements to the original design. John Condie's steam hammer, built for Fulton in Glasgow, had a stationary piston and a moving cylinder to which the hammer was attached. The piston was hollow, and was used to deliver steam to the cylinder and then remove it. The hammer weighed 6.5 tons with a stroke of 7.5 feet (2.3 m). [24] Condie steam hammers were used to forge the shafts of Isambard Kingdom Brunel's SS Great Eastern . [25] A high-speed compressed-air hammer was described in The Mechanics' Magazine in 1865, a variant of the steam hammer for use where steam power was not available or a very dry environment was required. [26]

The Bowling Ironworks steam hammers had the steam cylinder bolted to the back of the hammer, thus reducing the height of the machine. [24] These were designed by John Charles Pearce, who took out a patent for his steam hammer design several years before Nasmyth's patent expired. [27] Marie-Joseph Farcot of Paris proposed a number of improvements including an arrangement so the steam acted from above, increasing the striking force, improved valve arrangements and the use of springs and material to absorb the shock and prevent breakage. [24] [28] John Ramsbottom invented a duplex hammer, with two rams moving horizontally towards a forging placed between them. [29]

Using the same principles of operation, Nasmyth developed a steam-powered pile-driving machine. At its first use at Devonport, a dramatic contest was carried out. His engine drove a pile in four and half minutes compared with the twelve hours that the conventional method required. [30] It was soon found that a hammer with a relatively short fall height was more effective than a taller machine. The shorter machine could deliver many more blows in a given time, driving the pile faster even though each blow was smaller. It also caused less damage to the pile. [31]

Riveting machines designed by Garforth and Cook were based on the steam hammer. [32] The catalog for the Great Exhibition held in London in 1851 said of Garforth's design, "With this machine, one man and three boys can rivet with perfect ease, and in the firmest manner, at the rate of six rivets per minute, or three hundred and sixty per hour." [33] Other variants included crushers to help extract iron ore from quartz and a hammer to drive holes in the rock of a quarry to hold gunpowder charges. [32] An 1883 book on modern steam practice said

The direct application of steam to forging hammers is beyond question the greatest improvement that has ever been made in forging machinery; not only has it simplified the operations that were carried on before its invention, but it has added many branches, and extended the art of forging, to purposes that could never have been attained except by the steam hammer. ... The steam hammer ... seems to be so perfectly adapted to fill the different conditions of power hammering that there seems nothing left to be desired... [34]

Later development

Steam hammer manufactured by F. Banning AG in 1929, used by Tampella, located since 1977 at the Murikka Institute in Tampere, Finland as memorial of iron industry in the city. Banning steam hammer 2, Murikka.jpg
Steam hammer manufactured by F. Banning AG in 1929, used by Tampella, located since 1977 at the Murikka Institute in Tampere, Finland as memorial of iron industry in the city.
The giant Creusot steam hammer built in 1877 by Schneider et Cie in Le Creusot Le Creusot - Marteau Pilon 5.jpg
The giant Creusot steam hammer built in 1877 by Schneider et Cie in Le Creusot

Schneider & Co. built 110 steam hammers between 1843 and 1867 with different sizes and strike rates, but trending towards ever larger machines to handle the demands of large cannon, engine shafts and armor plate, with steel increasingly used in place of wrought iron. In 1861 the "Fritz" steam hammer came into operation at the Krupp works in Essen, Germany. With a 50-ton blow, for many years it was the most powerful in the world. [35]

There is a story that the Fritz steam hammer took its name from a machinist named Fritz whom Alfred Krupp presented to the Emperor William when he visited the works in 1877. Krupp told the emperor that Fritz had such perfect control of the machine that he could let the hammer drop without harming an object placed on the center of the block. The Emperor immediately put his watch, which was studded with diamonds, on the block and motioned Fritz to start the hammer. When the machinist hesitated, Krupp told him "Fritz let fly!" He did as he was told, the watch was unharmed, and the emperor gave Fritz the watch as a gift. Krupp had the words "Fritz let fly!" engraved on the hammer. [36]

The Schneiders eventually saw a need for a hammer of colossal proportions. [35] The Creusot steam hammer was a giant steam hammer built in 1877 by Schneider and Co. in the French industrial town of Le Creusot. With the ability to deliver a blow of up to 100 tons, the Creusot hammer was the largest and most powerful in the world. [37] A wooden replica was built for the Exposition Universelle (1878) in Paris. In 1891 the Bethlehem Iron Company of the United States purchased patent rights from Schneider and built a steam hammer of almost identical design but capable of delivering a 125-ton blow. [37]

Eventually the great steam hammers became obsolete, displaced by hydraulic and mechanical presses. The presses applied force slowly and at a uniform rate, ensuring that the internal structure of the forging was uniform, without hidden internal flaws. [38] They were also cheaper to operate, not requiring steam to be blown off, and much cheaper to build, not requiring huge strong foundations.

The 1877 Creusot steam hammer now stands as a monument in the Creusot town square. [38] An original Nasmyth hammer stands facing his foundry buildings (now a "business park"). A larger Nasmyth & Wilson steam hammer stands in the campus of the University of Bolton.

Steam hammers continue to be used for driving piles into the ground. [1] Steam supplied by a circulating steam generator is more efficient than air. [39] However, today compressed air is often used rather than steam. [31] As of 2013 manufacturers continued to sell air/steam pile-driving hammers. [40] Forging services suppliers also continue to use steam hammers of varying sizes based on classical designs. [41]

See also

Related Research Articles

<span class="mw-page-title-main">Engine</span> Machine that converts one or more forms of energy into mechanical energy (of motion)

An engine or motor is a machine designed to convert one or more forms of energy into mechanical energy.

<span class="mw-page-title-main">Piston</span> Machine component used to compress or contain expanding fluids in a cylinder

A piston is a component of reciprocating engines, reciprocating pumps, gas compressors, hydraulic cylinders and pneumatic cylinders, among other similar mechanisms. It is the moving component that is contained by a cylinder and is made gas-tight by piston rings. In an engine, its purpose is to transfer force from expanding gas in the cylinder to the crankshaft via a piston rod and/or connecting rod. In a pump, the function is reversed and force is transferred from the crankshaft to the piston for the purpose of compressing or ejecting the fluid in the cylinder. In some engines, the piston also acts as a valve by covering and uncovering ports in the cylinder.

<span class="mw-page-title-main">James Nasmyth</span> Scottish mechanical engineer and inventor

James Hall Nasmyth was a Scottish engineer, philosopher, artist and inventor famous for his development of the steam hammer. He was the co-founder of Nasmyth, Gaskell and Company manufacturers of machine tools. He retired at the age of 48, and moved to Penshurst, Kent where he developed his hobbies of astronomy and photography.

<span class="mw-page-title-main">Watt steam engine</span> Industrial Revolution era stream engine design

The Watt steam engine design was an invention of James Watt that became synonymous with steam engines during the Industrial Revolution, and it was many years before significantly new designs began to replace the basic Watt design.

<span class="mw-page-title-main">Stirling engine</span> Closed-cycle regenerative heat engine

A Stirling engine is a heat engine that is operated by the cyclic expansion and contraction of air or other gas by exposing it to different temperatures, resulting in a net conversion of heat energy to mechanical work.

<span class="mw-page-title-main">William Symington</span> Scottish engineer and inventor

William Symington (1764–1831) was a Scottish engineer and inventor during the Georgian era. He is most well known as the builder of the first practical steamboat, the Charlotte Dundas. The engine has been described as "without doubt the most compact and efficient marine steam engine up to that time" and its design would influence later steamboat and steamship engine designs. While Symington died in povery after failing to commercialise his steam engine designs, he is still credited as one of the great inventors of the early Industrial Revolution.

<span class="mw-page-title-main">Jackhammer</span> Pneumatic tool

A jackhammer is a pneumatic or electro-mechanical tool that combines a hammer directly with a chisel. It was invented by William McReavy, who then sold the patent to Charles Brady King. Hand-held jackhammers are generally powered by compressed air, but some are also powered by electric motors. Larger jackhammers, such as rig-mounted hammers used on construction machinery, are usually hydraulically powered. These tools are typically used to break up rock, pavement, and concrete.

Steam power developed slowly over a period of several hundred years, progressing through expensive and fairly limited devices in the early 17th century, to useful pumps for mining in 1700, and then to Watt's improved steam engine designs in the late 18th century. It is these later designs, introduced just when the need for practical power was growing due to the Industrial Revolution, that truly made steam power commonplace.

<span class="mw-page-title-main">Hot air engine</span> External combustion engine using air as the working fluid

A hot air engine is any heat engine that uses the expansion and contraction of air under the influence of a temperature change to convert thermal energy into mechanical work. These engines may be based on a number of thermodynamic cycles encompassing both open cycle devices such as those of Sir George Cayley and John Ericsson and the closed cycle engine of Robert Stirling. Hot air engines are distinct from the better known internal combustion based engine and steam engine.

<span class="mw-page-title-main">Le Creusot</span> Commune in Bourgogne-Franche-Comté, France

Le Creusot is a commune and industrial town in the Saône-et-Loire department, region of Bourgogne-Franche-Comté, eastern France.

<span class="mw-page-title-main">Beam engine</span> Early configuration of the steam engine utilising a rocking beam to connect major components.

A beam engine is a type of steam engine where a pivoted overhead beam is used to apply the force from a vertical piston to a vertical connecting rod. This configuration, with the engine directly driving a pump, was first used by Thomas Newcomen around 1705 to remove water from mines in Cornwall. The efficiency of the engines was improved by engineers including James Watt, who added a separate condenser; Jonathan Hornblower and Arthur Woolf, who compounded the cylinders; and William McNaught, who devised a method of compounding an existing engine. Beam engines were first used to pump water out of mines or into canals but could be used to pump water to supplement the flow for a waterwheel powering a mill.

<span class="mw-page-title-main">Pile driver</span> Heavy equipment

A pile driver is a heavy-duty tool used to drive piles into soil to build piers, bridges, cofferdams, and other "pole" supported structures, and patterns of pilings as part of permanent deep foundations for buildings or other structures. Pilings may be made of wood, solid steel, or tubular steel, and may be driven entirely underwater/underground, or remain partially aboveground as elements of a finished structure.

A six-stroke engine is one of several alternative internal combustion engine designs that attempt to improve on traditional two-stroke and four-stroke engines. Claimed advantages may include increased fuel efficiency, reduced mechanical complexity, and/or reduced emissions. These engines can be divided into two groups based on the number of pistons that contribute to the six strokes.

<span class="mw-page-title-main">Creusot steam hammer</span>

The Creusot steam hammer is a giant steam hammer built in 1877 by Schneider and Co. in the French industrial town of Le Creusot. With the ability to deliver a blow of up to 100 tons, the Creusot hammer was the most powerful in the world until 1891, when the Bethlehem Iron Company of the United States purchased patent rights from Schneider and built a steam hammer of almost identical design but capable of delivering a 125-ton blow.

<span class="mw-page-title-main">History of the steam engine</span> Heat engine that performs mechanical work using steam as its working fluid

The first recorded rudimentary steam engine was the aeolipile mentioned by Vitruvius between 30 and 15 BC and, described by Heron of Alexandria in 1st-century Roman Egypt. Several steam-powered devices were later experimented with or proposed, such as Taqi al-Din's steam jack, a steam turbine in 16th-century Ottoman Egypt, Denis Papin's working model of the steam digester in 1679 and Thomas Savery's steam pump in 17th-century England. In 1712, Thomas Newcomen's atmospheric engine became the first commercially successful engine using the principle of the piston and cylinder, which was the fundamental type of steam engine used until the early 20th century. The steam engine was used to pump water out of coal mines.

<span class="mw-page-title-main">Return connecting rod engine</span>

A return connecting rod, return piston rod or double piston rod engine or back-acting engine is a particular layout for a steam engine.

<span class="mw-page-title-main">François Bourdon</span> French engineer and inventor

François Prudent Bourdon was a French engineer and inventor, mainly interested in development of steam-powered boats for inland navigation. He is known for designing one of the first steam hammers.

Robert Wilson FRSE FRSSA was a Scottish engineer, remembered as inventor of a special kind of a screw propeller, which he demonstrated in 1827. Wilson also designed a self-acting motion for steam hammers which was key to making them practical for industrial use, among many other inventions.

A bash valve is a valve within a piston engine, used to control the admission of the working fluid. They are directly actuated valves, operated by contact between the piston and the valve tip.

<span class="mw-page-title-main">Naphthalene locomotive</span>

A Naphthalene locomotive was tested in France in 1913. It was built by Schneider-Creusot for use in their own plant.

References

Citations

  1. 1 2 Das 2010, p. 548.
  2. ↑ Kaushish 2010, p. 720.
  3. 1 2 Sharma 2007, p. 239-240.
  4. ↑ Winton & Millar 1883, p. 50.
  5. ↑ Sharma 2007, p. 243-244.
  6. ↑ Altan 2005, p. 137.
  7. ↑ Altan 2005, p. 136.
  8. ↑ Winton & Millar 1883, p. 52.
  9. ↑ Winton & Millar 1883, p. 53.
  10. ↑ Rajput 2007, p. 155.
  11. ↑ Sharma 2007, p. 243.
  12. ↑ Whitlow 2011.
  13. 1 2 Rowlandson 1875, p. 10.
  14. ↑ Brande & Cox 1867, p. 593.
  15. ↑ Patent granted to John Hague 1827.
  16. ↑ Grimshaw 1865, p. 331.
  17. 1 2 Chomienne 1888, p. 254.
  18. 1 2 3 Boutany 1885, p. 59.
  19. ↑ François BOURDON: Archives Côte d’Or.
  20. 1 2 Nasmyth & Smiles 1883, p. 259.
  21. ↑ Nasmyth steam hammer.
  22. 1 2 Evans 2004, p. 58.
  23. ↑ Rowlandson 1875, p. 34.
  24. 1 2 3 Artizan Club (Great Britain) 1868, p. 301.
  25. ↑ Condie 1860, p. 142.
  26. ↑ Grimshaw 1865, p. 329.
  27. ↑ Cudworth 1891, p. 234.
  28. ↑ Patent office 1871, p. 1900.
  29. ↑ Tomkins 1878, p. 343.
  30. ↑ Nasmyth & Smiles 1883, p. 263.
  31. 1 2 Rajapakse 2011, p. 350.
  32. 1 2 Artizan Club (Great Britain) 1868, p. 302.
  33. ↑ 1851 Great Exhibition: Official Catalogue.
  34. ↑ Winton & Millar 1883, p. 51.
  35. 1 2 Vogel & Shayt 1981, p. 2.
  36. ↑ Fritz Let Fly 1884.
  37. 1 2 Vogel & Shayt 1981, p. 3.
  38. 1 2 Vogel & Shayt 1981, p. 4.
  39. ↑ Venkatramaiah 1995, p. 759.
  40. ↑ Vulcan Single/Acting Hammers.
  41. ↑ Hammers: Scot Forge.

Sources

External links

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.