Stephenson's Rocket

Last updated

Rocket
Stephenson's Rocket drawing.jpg
A contemporary drawing of Rocket
Type and origin
Power typeSteam
Builder Robert Stephenson and Company
Build date1829
Specifications
Configuration:
   Whyte 0-2-2
   UIC A1 n2
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.4 ft 8+12 in (1.44 m)
Trailing dia. 2 ft 6 in (0.76 m)
Wheelbase 7 ft 1 in (2.16 m)
Axle load 2 long tons 12 cwt 1 qr (5,850 lb or 2.65 t) [1]
Loco weight4 long tons 5 cwt (9,500 lb or 4.3 t)
Fuel type Coke
Firebox:
  Grate area6 sq ft (1 m2)
Boiler
  • 3 ft 4 in (1 m) diameter x
  • 6 ft (2 m) length [2]
x 0.25 in (6 mm) Thick [3]
Boiler pressure50 lbf/in2 (340 kPa)
Heating surface:
  Firebox1.6 m2 (17 sq ft) [2] x 2 ft (0.61 m) width x 3 ft (0.91 m) height [4]
  Tubes12.8 m2 (138 sq ft) [2]
  Tubes and flues25 3 in (76 mm) copper tubes
  Total surface15.2 m2 (164 sq ft) [2]
Cylinders Two, outside. Angled at 38° [3]
Cylinder size 8 in × 16.5 in (203 mm × 419 mm) [5]
Valve gear slip eccentric with manual override
Valve typeflat slide valve with exhaust cavity
Performance figures
Maximum speed30 mph (48 km/h) [6]
Tractive effort 825 lbf
Career
Operators
Current owner Science Museum
DispositionOn static display

Stephenson's Rocket is an early steam locomotive of 0-2-2 wheel arrangement. It was built for and won the Rainhill Trials of the Liverpool and Manchester Railway (L&MR), held in October 1829 to show that improved locomotives would be more efficient than stationary steam engines. [7]

Contents

Rocket was designed and built by Robert Stephenson in 1829, and built at the Forth Street Works of his company in Newcastle upon Tyne.

Though Rocket was by no means the first steam locomotive, it was the first to bring together several innovations to produce the most advanced locomotive of its day. It is the most famous example of an evolving design of locomotives by Stephenson that became the template for most steam engines in the following 150 years.

The locomotive was preserved and displayed in the Science Museum in London until 2018, after which it was briefly exhibited at various sites around the U.K. until it came to rest at the National Railway Museum in York. Since 2023, it has been based at the Locomotion Museum in Shildon. [8]

History

Prior developments

Rocket was built at a time of rapid development of steam engine technology. It was based on experience gained from earlier designs by George and Robert Stephenson, including the Killingworth locomotive Blücher (1814); Locomotion (1825); and the Lancashire Witch (1828).

Conception

There have been differences in opinion on who should be given the credit for designing Rocket. George Stephenson had designed several locomotives before but none as advanced as Rocket. At the time that Rocket was being designed and built at the Forth Banks Works, he was living in Liverpool overseeing the building of the Liverpool and Manchester Railway. His son Robert had recently returned from a stint working in South America and resumed as managing director of Robert Stephenson and Company. He was in daily charge of designing and constructing the new locomotive. Although he was in frequent contact with his father in Liverpool and probably received advice from him, it is difficult not to give the majority of the credit for the design to Robert. A third person who may deserve a significant amount of credit is Henry Booth, the treasurer of the Liverpool and Manchester Railway. He is believed to have suggested to Robert Stephenson that a multi-tube boiler should be used. [9] [10]

Stephenson designed Rocket for the Rainhill trials, and the specific rules of that contest. As the first railway intended for passengers more than freight, the rules emphasised speed and would require reliability, but the weight of the locomotive was also tightly restricted. Six-wheeled locomotives were limited to six tons, four-wheeled locomotives to four and a half tons. In particular, the weight of the train expected to be hauled was to be no more than three times the actual weight of the locomotive. Stephenson realised that whatever the size of previously successful locomotives, this new contest would favour a fast, light locomotive of only moderate hauling power. [11]

Rainhill trials

On 20 April 1829, the board of the Liverpool and Manchester Railway project passed a resolution for a competition to be held to prove their railway could be reliably operated by steam locomotives, there being advice from eminent engineers of the age that stationary engines would be required. [12] A prize of £500 was offered as an incentive to the winner, with strict conditions a locomotive would need to meet to enter the trial. [13] Robert Stephenson was able to report to Henry Booth on 5 September 1829 that Rocket [lower-alpha 1] had performed initial manufacturer tests with flying colours at Killingworth. Rocket was dismantled at Newcastle and began the long trip to Rainhill: by horse wagon to Carlisle; lighter to Port Carlisle then by the Cumberland steamer to Liverpool for re-assembly on 18 September 1829. [15] [16] Rocket passed the trial requirement of achieving an average speed of 10 mph (16 km/h) over 70 miles (110 km) by over 40 percent. [17] Demonstrations also saw Rocket consistently and easily haul a carriage with over 20 persons up the Whiston Incline at over 15 mph (24 km/h), and light engine running of around 30 mph (48 km/h). [17] No other locomotive at the trials was able to achieve anything like the level of performance reliably, with partners Booth and Stephensons sharing the £500 winnings, and perhaps more importantly the need for stationary engines being demonstrated as unnecessary with sceptics such as Rastrick on the way to conversion. [18]

Operation

A replica coach and Rocket at the Rocket 150 event Replica Rocket and coach.jpg
A replica coach and Rocket at the Rocket 150 event
Rocket as preserved in the Science Museum, London. Stephenson's Rocket.jpg
Rocket as preserved in the Science Museum, London.
A closer view StephensonRocketScienceMuseumLondonJan2008.jpg
A closer view

The opening ceremony of the L&MR on 15 September 1830 was a considerable event, drawing luminaries from the government and industry, including the Prime Minister, the Duke of Wellington. The day started with a procession of eight trains setting out from Liverpool for Manchester. The parade was led by Northumbrian driven by George Stephenson, and included Phoenix driven by his son Robert, North Star driven by his brother Robert Sr. and Rocket driven by assistant engineer Joseph Locke. The day was marred by the death of William Huskisson, the Member of Parliament for Liverpool, who was struck and killed by Rocket at Parkside. [9]

History between 1830 and 1840 is only vaguely documented. From 1830 to 1834, Rocket served on the Liverpool and Manchester Railway.

After service on the L&MR, Rocket was used between 1836 and 1840 on Lord Carlisle's Railway near Brampton, in Cumberland (now Cumbria), England. [19] [20] [ dead link ]

Built as a prototype to win a speed trial, the engine was soon superseded by improved designs, such as Stephenson's Northumbrian and Planet designs, both of 1830.

Within a few years, the Rocket itself had been much modified to be similar to the Northumbrian class. The cylinders were altered to a near-horizontal position, compared to the angled arrangement as new; the firebox capacity was enlarged and the shape simplified; and the locomotive was given a drum smokebox. [21] These arrangements can be seen in the engine today. Such are the changes in the engine from 1829 that The Engineer magazine, circa 1884, concluded that "it seems to us indisputable that the Rocket of 1829 and 1830 were totally different engines". [22]

In 1834, the engine was selected for further (unsuccessful) modifications to test a newly developed rotary steam engine designed by Admiral The 10th Earl of Dundonald. [23] At a cost of nearly £80, Rocket's cylinders and driving rods were removed and two of the engines were installed directly on its driving axle with a feedwater pump in between. On 22 October, of that year, an operational trial was held with disappointing results; one witness observing, that "the engine could not be made to draw a train of empty carriages". Due to inherent design flaws and engineering difficulties associated with their design, Lord Dundonald's engines were simply too feeble for the task. [24]

In 1836, Rocket was sold for £300 and began service on the Brampton Railway, a mineral railway in Cumberland that had recently converted to Stephenson gauge. [25] It remained here at Tindale, after service, until 1862 and its donation to the Patent Office Museum, London.

Preservation

In 1862, Rocket was donated to the Patent Office Museum in London (now the Science Museum) [1] by the Thompsons of Milton Hall, near Brampton. [26]

The locomotive still exists, though it has not been operated since becoming a museum exhibit. It was displayed at the Science Museum for 150 years, although in a form much modified from its state at the Rainhill Trials. In 2018, it was displayed first in Newcastle [27] and then in Manchester at the Science and Industry Museum from 25 September 2018 to 8 September 2019. [28] From 2019, it was displayed at the National Railway Museum, York, [27] [29] and is currently housed at Locomotion Museum in Shildon, County Durham, since 2023.

Design

Replica of the Rocket in its original condition in the Transport Museum in Nuremberg during the exhibition "Adler, Rocket and Co." Rocket Verkehrsmuseum Nuernberg 12092010 side view.JPG
Replica of the Rocket in its original condition in the Transport Museum in Nuremberg during the exhibition "Adler, Rocket and Co."
Side elevation of Rocket Stephenson's Rocket -- colour side elevation drawing (NRM UK SSPL 10301005).tif
Side elevation of Rocket

The locomotive had a tall 16 ft smokestack chimney at the front, a cylindrical boiler in the middle, and a separate firebox at the rear. The large front pair of wooden wheels was driven by two external cylinders set at an angle of 38°. The smaller rear wheels were not coupled to the driving wheels, giving an 0-2-2 wheel arrangement. [9] One of the cylinders drove a small 1.25 inch diameter feedwater pump which pumped water from the tender to the boiler, a valve could be adjusted to control the amount of water needed.

Driving wheels

Stephenson's most visible decision was to use a single pair of driving wheels, with a small carrying axle behind. This was the first 0-2-2 and first single driver locomotive. [lower-alpha 2] [30] The use of single drivers gave several advantages. The weight of coupling rods was avoided and the second axle could be smaller and lightweight, as it only carried a small portion of the weight. Rocket placed just over 2+12 tons of its 4+12 ton total weight onto its driving wheels, [31] a higher axle load than Sans Pareil , even though the 0-4-0 was heavier overall at 5 ton, and officially disqualified by being over the 4+12 ton limit. [30] Early locomotive designers had been concerned that the adhesion of a locomotive's driving wheels would be inadequate, but Stephenson's past experience convinced him that this would not be a problem, particularly with the light trains of the trials contest.

Boiler

Rocket uses a multi-tubular boiler design. Previous locomotive boilers consisted of a single pipe surrounded by water (though the Lancashire Witch did have twin flues). Rocket had 25 copper [32] fire-tubes that carry the hot exhaust gas from the firebox, through the wet boiler to the blast pipe and chimney. This arrangement resulted in a greatly increased surface contact area of hot pipe with boiler water when compared to a single large flue. Additionally, radiant heating from the enlarged separate firebox helped deliver a further increase in steaming and hence boiler efficiency.

The original innovator of multiple fire-tubes is unclear, between Stephenson and Marc Seguin. It is known that Seguin visited Stephenson to observe Locomotion and that he also built two multi-tubular locomotives of his own design for the Saint-Étienne–Lyon railway before Rocket. Rocket's boiler was of the more highly developed form, with the separate firebox and a blastpipe for draught, rather than Seguin's cumbersome fans, but Rocket was not the first multi-tubular boiler, although it remains unclear just whose invention it was.

The benefits of increasing the fire-tube area had also been attempted with Ericsson and Braithwaite's Novelty at Rainhill. Their design though used a single fire-tube, folded in three. This offered an increased surface area, but only at the cost of a proportionately increased length and so poor draught on the fire. Its arrangement also made tube cleaning impractical.

The advantages of the multiple-tube boiler were quickly recognised, even for heavy, slow freight locomotives. By 1830, Stephenson's past employee Timothy Hackworth had re-designed his return-flued Royal George as the return-tubed Wilberforce class. [33]

Blastpipe

Rocket also used a blastpipe, feeding the exhaust steam from the cylinders into the base of the chimney so as to induce a partial vacuum and pull air through the fire. Credit for the invention of the blastpipe is disputed, though Stephenson used it as early as 1814. [34] The blastpipe worked well on the multi-tube boiler of Rocket but on earlier designs with a single flue through the boiler it had created so much suction that it tended to rip the top off the fire and throw burning cinders out of the chimney, vastly increasing the fuel consumption. [9]

Cylinders and pistons

A cutaway view of the cylinder and steam valve of the replica Rocket Rocket Cylinder.jpg
A cutaway view of the cylinder and steam valve of the replica Rocket

Like the Lancashire Witch, Rocket had two cylinders set at angle from the horizontal, with the pistons driving a pair of 4 feet 8.5 inches (1.435 m) diameter wheels. [35] Most previous designs had the cylinders positioned vertically, which gave the engines an uneven swaying motion as they progressed along the track. Subsequently, Rocket was modified so that the cylinders were set close to horizontal, a layout that influenced nearly all designs that followed.

Again like the Lancashire Witch, the pistons were connected directly to the driving wheels, an arrangement which is found in subsequent steam locomotives. [1]

Firebox

The firebox was separate from the boiler and was double walled, with a water jacket between them. Stephenson recognised that the hottest part of the boiler, and thus the most effective for evaporating water, was that surrounding the fire itself. This firebox was heated by radiant heat from the glowing coke, not just convection from the hot exhaust gas.

Locomotives of Rocket's era were fired by coke rather than coal. Local landowners were already familiar with the dark clouds of smoke from coal-fired stationary engines and had imposed regulations on most new railways that locomotives would 'consume their own smoke'. [11] The smoke from a burning coke fire was much cleaner than that from coal. It was not until 30 years later and the development of the long firebox and brick arch that locomotives would be effectively able to burn coal directly.

Rocket's first firebox was of copper sheet and of a somewhat rectangular shape from the side. [36] The throatplate was of firebrick, possibly the backhead too. [37] When rebuilt around 1831, [37] this was replaced by a wrought iron backhead and throatplate, with a drum wrapper (now missing), presumed to be of copper, between them. This gave a larger internal volume and encouraged better combustion within the firebox, rather than inside the tubes. These early fireboxes formed a separate water space from the boiler drum and were connected by prominent external copper pipes.

Other Rocket-type locomotives

Rocket was followed by a number of other engines of similar 0-2-2 layout with rear-mounted cylinders built for the L&MR before it opened on 15 September 1830, culminating in the Northumbrian (1830), by which time the cylinders were horizontal. Other engines of the Rocket design which were delivered to the Liverpool and Manchester railway included Arrow, Comet, Dart and Meteor, all being delivered to the railway during 1830.

Subsequent designs

At around the same time, Stephenson experimented with front-mounted cylinders. The unsuccessful 0-4-0 Invicta, built in 1829 immediately after Rocket, still had them at an angle. The successful 2-2-0 locomotive Planet (1830) had internal front-mounted cylinders set to the horizontal.

Engines built to the Planet design and the subsequent 2-2-2 Patentee design of 1833 made the design of Rocket obsolete.

Replicas and models

Buster Keaton made whimsical use of his replica Rocket in Our Hospitality. Buster Rocket.jpg
Buster Keaton made whimsical use of his replica Rocket in Our Hospitality .
Rocket steam replica, Albert Hall and a BEA Routemaster bus in 1979 Rocket and Albert Hall.jpg
Rocket steam replica, Albert Hall and a BEA Routemaster bus in 1979

In 1923, Buster Keaton had a functioning replica built for the film Our Hospitality . [38] Two years later, the replica was used again in the Al St. John film, The Iron Mule , directed by Keaton's mentor, Roscoe "Fatty" Arbuckle. [39] The subsequent whereabouts of the replica are unknown. There are, however, at least two other replicas of Rocket in the US, [40] both built by Robert Stephenson and Hawthorns in 1929; one is at the Henry Ford Museum in the Metro Detroit suburb of Dearborn, Michigan, [41] the other at the Museum of Science and Industry, Chicago. [42]

The earliest full-size replica of Rocket seems to have been one depicted on a London and North Western Railway postcard (therefore pre-1923). [43] [44]

A cut-away static replica was built in 1935 and displayed for many years next to the original at London's Science Museum. In 1979, a further, working replica Rocket was built by Locomotion Enterprises in the Springwell workshops at the Bowes Railway for the 150th anniversary celebrations. [45] It first worked in public on a short length of track in front of the Albert Memorial in Kensington Gardens from 25 August to 2 September 1979, before going to Newcastle on 9 September, York on 16 October [46] and running the measured mile, between Lea Green and Rainhill, on the last two days at the Rocket 150 celebrations from 24 to 26 May 1980. [47] It has a shorter chimney than the original to clear the bridge at Rainhill: successive additions of ballast and heavier rail have raised the track, leaving less headroom than in the 19th century. As of 2022, both of these replicas were based at the National Railway Museum, York, with the original Rocket.

In 1963, Tri-ang Railways released a 00 Gauge model of Rocket containing three coaches and crew members. It was produced until 1969 by Tri-ang Hornby. It was re-introduced to the Hornby range in 1982 until 1983 in Hornby Railways packaging. However this 1982 re-introduced model was un-catalogued, and it was only available through exclusive retailers and from Hornby directly. [48]

In 1980, as part of the Rocket 150 anniversary, Hornby launched a 3+12 in (89 mm) gauge live steam Rocket locomotive, with additional track and coaches available separately.

In 2020, Hornby announced a newly tooled 00 Gauge model of Stephenson's Rocket with three coaches and crew members as part of their Centenary range. It was available as a standard model and a limited edition with commemorative certificate of authentication in retro 1963 Hornby Centenary Tri-ang Railways packaging. [49]

See also

Notes

  1. Originally Rocket was known by the Stephensons as the Premium Engine [14]
  2. Although Novelty would also bring a 0-2-2 arrangement to Rainhill

Footnotes

  1. 1 2 3 "Rocket" (PDF). Rainhilltrials.com. Archived from the original (PDF) on 5 October 2013. Retrieved 22 August 2012.
  2. 1 2 3 4 "Engineering Timelines - Rocket, Stephenson's locomotive".
  3. 1 2 Dawson, Anthony. Locomotives of the Victorian Railway: The Early Days of Steam. United Kingdom, Amberley Publishing, 2019.
  4. Smiles, Samuel. The Story of the Life of George Stephenson: Including a Memoir of His Son Robert Stephenson. United Kingdom, John Murray, 1873.
  5. Richard, Gibbon. Stephenson's Rocket Manual: 1829 Onwards. United Kingdom, Haynes Publishing UK, 2016.
  6. "Stephenson's Rocket". The Science Museum Group. Retrieved 11 November 2018.
  7. Carlson (1969), pp. 214–215, 219, 223.
  8. "Stephenson's iconic Rocket to be displayed at Locomotion in Shildon | National Railway Museum". 2 March 2023.
  9. 1 2 3 4 Burton, Anthony (1980). The Rainhill Story. British Broadcasting Corporation. ISBN   0-563-17841-8.
  10. Ross, David (2004). The Willing Servant. Tempus. pp. 32–33. ISBN   0-7524-2986-8.
  11. 1 2 Snell (1973), p. 59.
  12. Ferneyhough (1980), p. 44.
  13. Ferneyhough (1980), p. 46.
  14. Ferneyhough (1980), p. 48.
  15. Ferneyhough (1980), p. 49.
  16. Thomas (1980), p. 66.
  17. 1 2 Ferneyhough (1980), p. 55.
  18. Ferneyhough (1980), p. 56–57.
  19. Webb, Brian; Gordon, David A. (1978). Lord Carlisle's Railways. Lichfield, Staffordshire: RCTS. p. 101. ISBN   0-901115-43-6.
  20. Mel Draper. "Engineering and History of Robert Stephenson's Rocket" . Retrieved 16 November 2010.
  21. The Project Gutenberg EBook of Scientific American Supplement, No. 460, 25 October 1884, by Various
  22. Bailey, Michael R; Glithero, John P (2002). The Stephensons' Rocket. York: National Railway Museum/Science Museum. ISBN   978-1-900747-49-3.
  23. Bailey; Glithero (2000: 35–37)
  24. Douglas Self. "Cochrane's Rotary Steam Engines" . Retrieved 14 July 2018.
  25. "Brampton Railway".
  26. Liffen, John (2003). "The Patent Office Museum and the beginnings of railway locomotive preservation". In Lewis, M. J. T. (ed.). Early Railways 2. London: Newcomen Society. pp. 202–220. ISBN   0-904685-13-6.
  27. 1 2 Brown, Mark (23 July 2018). "'Our Elgin marbles': Stephenson's Rocket returns to north". The Guardian. Retrieved 23 July 2018.
  28. "Stephenson's Rocket returns to Manchester for first time in 180 years". 23 May 2018. Retrieved 16 June 2019.
  29. Brown, Mark (8 August 2019). "'Stephenson Rocket at NRM': Stephenson's Rocket to be exhibited at National Railway Museum". NRM on Instagram. Archived from the original on 26 December 2021.
  30. 1 2 Snell (1973), p. 60.
  31. Bailey, Michael R.; Glithero, John P. (2000). The Engineering and History of Rocket: A Survey Report. London: Science Museum. p. 17. ISBN   1-900-747-18-9.
  32. Snell (1973), p. 84.
  33. Snell (1973), pp. 55–56.
  34. Smiles, Samuel (1862), "ch 5", The lives of the engineers, vol. 3, BoD – Books on Demand, ISBN   9783867412681
  35. Bailey, Michael (2000), The Engineering and History of "Rocket": A Survey Report, National Railway Museum, ISBN   9781900747189
  36. Richard, Gibbon. Stephenson's Rocket Manual: 1829 Onwards. United Kingdom, Haynes Publishing UK, 2016.
  37. 1 2 Snell (1973), p. 61.
  38. Buster Keaton: Interviews, by Buster Keaton, Kevin W. Sweeney
  39. "The Iron Mule". 12 April 1925. Retrieved 14 July 2018 via www.imdb.com.
  40. "Surviving Steam Locomotive Search". steamlocomotive.com. Archived from the original on 21 May 2011.
  41. "Robert Stephenson Stephensons Hawthorn Darlington Rocket". www.enuii.com. Archived from the original on 14 February 2018. Retrieved 14 July 2018.
  42. "Chicago Area Steam". www.steamlocomotive.com. Archived from the original on 13 July 2018. Retrieved 14 July 2018.
  43. "Stephenoson's Rocket 1829 Image". Archived from the original on 25 August 2011.
  44. "Rocket" (JPG). Archived from the original on 5 March 2012.{{cite web}}: CS1 maint: unfit URL (link)
  45. Satow, M. G. (October 1979). Slater, J.N. (ed.). "Rocket reborn". Railway Magazine. Vol. 125, no. 942. London: IPC Transport Press. pp. 472–474.
  46. Slater, J.N., ed. (October 1979). "Notes + News". Railway Magazine. Vol. 125, no. 942. London: IPC Transport Press. p. 508.
  47. Slater, J.N., ed. (May 1980). "Rocket 150". Railway Magazine. Vol. 126, no. 949. London: IPC Transport Press. pp. 226–227.
  48. "Hornby Collectors Guide Rocket". Hornby Railways Collector Guide. Retrieved 30 January 2020.
  49. "Hornby 'Stephenson's Rocket'". Hornby.com. Retrieved 30 January 2020.

Related Research Articles

<span class="mw-page-title-main">Rainhill trials</span> Locomotive motive power competition (1829)

The Rainhill trials was an important competition run from the 6 to 14 October 1829, to test George Stephenson's argument that locomotives would have the best motive power for the then nearly-completed Liverpool and Manchester Railway (L&MR). Ten locomotives were entered, of which five were able to compete, running along a 1 mile (1.6 km) length of level track at Rainhill, in Lancashire.

<span class="mw-page-title-main">Timothy Hackworth</span> British steam locomotive engineer (1786-1850)

Timothy Hackworth was an English steam locomotive engineer who lived in Shildon, County Durham, England and was the first locomotive superintendent of the Stockton and Darlington Railway.

<span class="mw-page-title-main">Liverpool and Manchester Railway</span> Railway in England

The Liverpool and Manchester Railway (L&MR) was the first inter-city railway in the world. It opened on 15 September 1830 between the Lancashire towns of Liverpool and Manchester in England. It was also the first railway to rely exclusively on locomotives driven by steam power, with no horse-drawn traffic permitted at any time; the first to be entirely double track throughout its length; the first to have a true signalling system; the first to be fully timetabled; and the first to carry mail.

<span class="mw-page-title-main">Steam locomotive</span> Railway locomotive that produces its pulling power through a steam engine

A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material to heat water in the locomotive's boiler to the point where it becomes gaseous and its volume increases 1,700 times. Functionally, it is a steam engine on wheels.

<i>Sans Pareil</i> Early British locomotive

Sans Pareil is a steam locomotive built by Timothy Hackworth which took part in the 1829 Rainhill Trials on the Liverpool and Manchester Railway, held to select a builder of locomotives. The name is French and means 'peerless' or 'without equal'.

<i>Locomotion</i> No. 1 Early steam locomotive (built 1825)

Locomotion No. 1 is an early steam locomotive that was built in 1825 by the pioneering railway engineers George and Robert Stephenson at their manufacturing firm, Robert Stephenson and Company. It became the first steam locomotive to haul a passenger-carrying train on a public railway, the Stockton and Darlington Railway (S&DR).

<span class="mw-page-title-main">0-2-2</span> Locomotive wheel arrangement

An 0-2-2, in the Whyte notation for the classification of steam locomotives by wheel arrangement, is one that has two coupled driving wheels followed by two trailing wheels, with no leading wheels. The configuration was briefly built by Robert Stephenson and Company for the Liverpool and Manchester Railway.

LMR 57 <i>Lion</i> Liverpool and Manchester Railway steam locomotive

The Liverpool and Manchester Railway (LMR) 57 Lion is an early 0-4-2 steam locomotive, which had a top speed of 40 mph (64 km/h) and could pull up to 200 tons. One of a pair designed for hauling freight, Lion was built by Todd, Kitson & Laird of Leeds in 1838. It featured in the 1953 Ealing comedy, The Titfield Thunderbolt.

<i>Novelty</i> (locomotive) Early experimental locomotive

Novelty was an early steam locomotive built by John Ericsson and John Braithwaite to take part in the Rainhill Trials in 1829.

<span class="mw-page-title-main">Marc Seguin</span> French engineer and inventor

Marc Seguin was a French engineer, inventor of the wire-cable suspension bridge and the multi-tubular steam-engine boiler.

<i>Planet</i> (locomotive)

Planet was an early steam locomotive built in 1830 by Robert Stephenson and Company for the Liverpool and Manchester Railway.

<span class="mw-page-title-main">Henry Booth</span> English railway pioneer businessman

Henry Booth was a British corn merchant, businessman and engineer particularly known as one of the key people behind the construction and management of the pioneering Liverpool and Manchester Railway (L&M), the world's first steam railway conducting both scheduled passenger services and freight.

Robert Stephenson and Company was a locomotive manufacturing company founded in 1823 in Forth Street, Newcastle upon Tyne in England. It was the first company in the world created specifically to build railway engines.

<i>Catch Me Who Can</i> Early British steam locomotive (1808)

Catch Me Who Can was the fourth and last steam railway locomotive created by the inventor and mining engineer Richard Trevithick. It was an evolution of three earlier locomotives which had been built for Coalbrookdale, Penydarren ironworks and Wylam colliery. Demonstration runs began in July 1808, and Catch Me Who Can was the first locomotive in the world to haul fare-paying passengers.

The blastpipe is part of the exhaust system of a steam locomotive that discharges exhaust steam from the cylinders into the smokebox beneath the chimney in order to increase the draught through the fire.

The history of rail transport in Great Britain to 1830 covers the period up to the opening of the Liverpool and Manchester Railway, the world's first intercity passenger railway operated solely by steam locomotives. The earliest form of railways, horse-drawn wagonways, originated in Germany in the 16th century. Soon wagonways were also built in Britain. However, the first use of steam locomotives was in Wales. The invention of wrought iron rails, together with Richard Trevithick's pioneering steam locomotive meant that Britain had the first modern railways in the world.

<span class="mw-page-title-main">Bury Bar Frame locomotive</span> Pioneering British locomotive type from 1830s

The Bury Bar Frame locomotive was an early type of steam locomotive, developed at the Liverpool works of Edward Bury and Company, later named Bury, Curtis, and Kennedy in 1842. By the 1830s, the railway locomotive had evolved into three basic types - those developed by Robert Stephenson, Timothy Hackworth and Edward Bury.

<i>Invicta</i> (locomotive) Preserved early British 0-4-0 locomotive

Invicta is an early steam locomotive, built by Robert Stephenson and Company in Newcastle-upon-Tyne during 1829. She was the twentieth locomotive built by railway engineers the Stephensons, being constructed immediately after Rocket. Invicta marked the end of the first phase of locomotive design, which had started with Richard Trevithick's Coalbrookdale locomotive of 1802.

<i>Northumbrian</i> (locomotive) 1830s British locomotive

Northumbrian was an early steam locomotive built by Robert Stephenson in 1830 and used at the opening of the Liverpool and Manchester Railway (L&M). It was the eighth of Stephenson's nine 0-2-2 locomotives in the style of Rocket, but it introduced several innovations, which were also included Majestic, the last of the class.

<span class="mw-page-title-main">Lyon, Hetton colliery railway</span>

The Hetton Colliery Lyon or Lyons is an early British steam locomotive that still survives in preservation. It is remarkable for having continued working into the early 20th century.

References