Wind chime

Last updated
A metal wind chime Wchime.jpg
A metal wind chime

Wind chimes are a type of percussion instrument constructed from suspended tubes, rods, bells or other objects that are often made of metal or wood. The tubes or rods are suspended along with some type of weight or surface which the tubes or rods can strike when they or another wind-catching surface are blown by the natural movement of air outside. They are usually hung outside of a building or residence as a visual and aural garden ornament. Since the percussion instruments are struck according to the random effects of the wind blowing the chimes, wind chimes have been considered an example of chance-based music. The tubes or rods may sound either indistinct pitches, or fairly distinct pitches. Wind chimes that sound fairly distinct pitches can, through the chance movement of air, create simple songs or broken chords.

Contents

History

Ancient Rome

Bronze tintinnabulum, Roman, 1st century AD, British Museum. Roman wind chime (tintinabulum) flying phallus with bells.jpg
Bronze tintinnabulum, Roman, 1st century AD, British Museum.

Roman wind chimes, usually made of bronze, were called tintinnabulum and were hung in gardens, courtyards, and porticoes where wind movement caused them to tinkle. Bells were believed to ward off malevolent spirits and were often combined with a phallus, which was also a symbol of good fortune and a charm against the evil eye. [1] The image shows one example with a phallus portrayed with wings and the feet of an animal, and a phallus for a tail. These additions increased its protective powers. [2]

Eastern and Southern Asia

Wind-powered bell or wind chime under temple eaves,. Banna-ji. Ashikaga, Tochigi. Japan Wind-powered bell under temple eaves,. Banna-ji. Ashikaga, Tochigi.jpg
Wind-powered bell or wind chime under temple eaves,. Banna-ji. Ashikaga, Tochigi. Japan

In India during the second century CE, and later in China, extremely large pagodas became popular with small wind bells hung at each corner; the slightest breeze caused the clapper to swing, made in bronze too, producing a melodious tinkling. It is said that these bells were originally intended to frighten away not only birds but also any lurking evil spirits. Wind bells are also hung under the corners of temple, palace and home roofs; they are not limited to pagodas. [3] Japanese glass wind bells known as fūrin ( 風鈴 ) have been produced since the Edo period, [4] and those at Mizusawa Station are one of the 100 Soundscapes of Japan. Wind chimes are thought to be good luck in parts of Asia and are used in Feng Shui.

Wind chimes started to become modernized around 1100 C.E. after the Chinese began to cast bells. A bell without a clapper, called a yong-zhong, was crafted by skilled metal artisans and primarily used in religious ceremonies. Afterwards, the Chinese created the feng-ling( 風鈴 ), which is similar to today's modern wind bell. Feng-lings were hung from shrines and pagodas to ward off evil spirits and attract benevolent ones. Today, wind chimes are common in the East and used to maximize the flow of chi, or life's energy.

Sounds and music

Wind chime with the audible tones a1-d2-f2-g2-a2-d3-f3-a3. The bamboo cylinder is not only the case of the instrument, but at the same time it is the resonator. The eight tones are produced by eight metal rods within the cylinder which are centrally struck by a disk attached to the cord with the wind sail. Windglockenspiel.Koshi.jpg
Wind chime with the audible tones a1-d2-f2-g2-a2-d3-f3-a3. The bamboo cylinder is not only the case of the instrument, but at the same time it is the resonator. The eight tones are produced by eight metal rods within the cylinder which are centrally struck by a disk attached to the cord with the wind sail.

Chimes produce inharmonic (as opposed to harmonic) spectra, although if they are hung at about 2/9 of their length [5] (22.4% [6] [7] ), some of the higher partials are damped and the fundamental rings the loudest. [7] This is common practice in high-quality wind chimes, which are also usually hung so the centre ball strikes the centre of the wind chime's length, also resulting in the loudest sounding fundamental. [7] Frequency is determined by the length, width, thickness, and material. There are formulas [7] that help predict the proper length to achieve a particular note, though a bit of fine tuning is often needed.

Most chimes employ pentatonic or tetratonic scales as the basis for the pitches of their individual chimes as opposed to the traditional western heptatonic scale. This is largely due to the fact that these scales inherently contain fewer dissonant intervals, and therefore sound more pleasant to the average listener when notes are struck at random.

In instruments such as organ pipes, the pitch is determined primarily by the length of the air column, because it is the resonance of the air column that generates the sound. The pipe material helps determine the "timbre" or "voice" of the pipe, but the air column determines the pitch. In a wind chime, the vibrations of the pipe itself radiate the sound after being struck, so the air column has little to do with the pitch being produced.

Sound can be produced when the tubes or rods come in contact with a suspended central clapper in the form of a ball or horizontal disk, or with each other.

Wind chimes may be used to observe changes in wind direction, depending on where they are hung when they commence to sound.

Materials

A close-up of metal rods on a wind chime. Chime closeup.jpg
A close-up of metal rods on a wind chime.

Wind chimes can be made of materials other than metal or wood and in shapes other than tubes or rods. Other wind chimes materials include glass, bamboo, shell, stone, earthenware, stoneware, beads, keys and porcelain. [8] More exotic items, such as silverware or cookie cutters, can also be recycled to create wind chimes. [9] The selected material can have a large effect on the sound a wind chime produces. The sounds produced by recycling objects such as these are not tunable to specific notes and range from pleasant tinkling to dull thuds. The sounds produced by properly sized wind chime tubes are tunable to notes. [7] As aluminum is the common metal with the lowest internal damping, wind chimes are often made from aluminum to achieve the longest and loudest sounding chime.

The tone depends on factors such as the material, the exact alloy, heat treatment, and whether a solid cylinder or a tube is used. If a tube is used, the wall thickness also affects the tone. Tone may also depend on the hanging method. The tone quality also depends on the material of the object that is used to hit the chimes.

With clay wind chimes, the higher the final firing temperature, the brighter and more ringing the resulting tone. Earthenware clay fired at lower temperatures produces a duller sound than stoneware clay fired at higher temperatures. Stoneware wind chimes are also more durable and able to resist stronger winds without suffering chipping or damage.

Mathematics of tubular wind chimes

The mode 1 (lowest frequency) vibration of a free Euler-Bernoulli beam of length 1 Free-Free Euler-Bernoulli Beam animation.gif
The mode 1 (lowest frequency) vibration of a free Euler–Bernoulli beam of length 1

A wind chime constructed of a circular tube may be modelled as a freely vibrating Euler–Bernoulli beam [10] and the dominant frequency in cycles per second is given by:

where L is the length of the tube, E is the Young's modulus for the tube material, I is the second moment of area of the tube, and μ is the mass per unit length of the tube. Young's modulus E is a constant for a given material. If the inner radius of the tube is ri and the outer radius is ro, then the second moment of area for an axis perpendicular to the axis of the tube is:

The mass per unit length is:

where ρ is the density of the tube material. The frequency is then

where W=ro-ri is the wall thickness and D is the average diameter D=ro+ri. For sufficiently thin-walled tubes the W2 term may be neglected, and for a given material, the main frequency is inversely proportional to L2 and proportional to the diameter D.

For the main mode of vibration, there will be two nodes on the tube, where the tube is motionless during the vibration. These nodes will be located at a distance of 22.416% of the length of the tube from each end of the tube. If the tube is simply supported (not clamped) at one or both of these nodes, the tube will vibrate as if these supports did not exist. A wind chime will give the clearest and loudest tone when it is hung using one of these node points as the attachment point. These attachment points are also the same as used by other similar instrument such as the xylophone and glockenspiel.

Use in music

David Sitek with a wind chime suspended from his guitar. Sitek wind chimes.jpg
David Sitek with a wind chime suspended from his guitar.

Different types of wind chimes have also been used in modern music and are listed as a percussion instrument. The following is a brief list of artists and composers who have used them:

Influence

Wind chime images

See also

Related Research Articles

<span class="mw-page-title-main">Fundamental frequency</span> Lowest frequency of a periodic waveform, such as sound

The fundamental frequency, often referred to simply as the fundamental, is defined as the lowest frequency of a periodic waveform. In music, the fundamental is the musical pitch of a note that is perceived as the lowest partial present. In terms of a superposition of sinusoids, the fundamental frequency is the lowest frequency sinusoidal in the sum of harmonically related frequencies, or the frequency of the difference between adjacent frequencies. In some contexts, the fundamental is usually abbreviated as f0, indicating the lowest frequency counting from zero. In other contexts, it is more common to abbreviate it as f1, the first harmonic.

The total harmonic distortion is a measurement of the harmonic distortion present in a signal and is defined as the ratio of the sum of the powers of all harmonic components to the power of the fundamental frequency. Distortion factor, a closely related term, is sometimes used as a synonym.

<span class="mw-page-title-main">Coaxial cable</span> Electrical cable type with concentric inner conductor, insulator, and conducting shield

Coaxial cable, or coax, is a type of electrical cable consisting of an inner conductor surrounded by a concentric conducting shield, with the two separated by a dielectric ; many coaxial cables also have a protective outer sheath or jacket. The term coaxial refers to the inner conductor and the outer shield sharing a geometric axis.

<span class="mw-page-title-main">Tubular bells</span> Mallet percussion instrument

Tubular bells (also known as chimes) are musical instruments in the percussion family. Their sound resembles that of church bells, carillons, or a bell tower; the original tubular bells were made to duplicate the sound of church bells within an ensemble. Each bell is a metal tube, 30–38 mm (1+141+12 in) in diameter, tuned by altering its length. Its standard range is C4–F5, though many professional instruments reach G5. Tubular bells are often replaced by studio chimes, which are a smaller and usually less expensive instrument. Studio chimes are similar in appearance to tubular bells, but each bell has a smaller diameter than the corresponding bell on tubular bells.

In physics, mean free path is the average distance over which a moving particle travels before substantially changing its direction or energy, typically as a result of one or more successive collisions with other particles.

<span class="mw-page-title-main">Solenoid</span> Type of electromagnet formed by a coil of wire

A solenoid is a type of electromagnet formed by a helical coil of wire whose length is substantially greater than its diameter, which generates a controlled magnetic field. The coil can produce a uniform magnetic field in a volume of space when an electric current is passed through it.

<span class="mw-page-title-main">Skin effect</span> Tendency of AC current flow in a conductors outer layer

In electromagnetism, skin effect is the tendency of an alternating electric current (AC) to become distributed within a conductor such that the current density is largest near the surface of the conductor and decreases exponentially with greater depths in the conductor. It is caused by opposing eddy currents induced by the changing magnetic field resulting from the alternating current. The electric current flows mainly at the skin of the conductor, between the outer surface and a level called the skin depth. Skin depth depends on the frequency of the alternating current; as frequency increases, current flow becomes more concentrated near the surface, resulting in less skin depth. Skin effect reduces the effective cross-section of the conductor and thus increases its effective resistance. At 60 Hz in copper, skin depth is about 8.5 mm. At high frequencies, skin depth becomes much smaller.

<span class="mw-page-title-main">Rayleigh distribution</span> Probability distribution

In probability theory and statistics, the Rayleigh distribution is a continuous probability distribution for nonnegative-valued random variables. Up to rescaling, it coincides with the chi distribution with two degrees of freedom. The distribution is named after Lord Rayleigh.

The Knudsen number (Kn) is a dimensionless number defined as the ratio of the molecular mean free path length to a representative physical length scale. This length scale could be, for example, the radius of a body in a fluid. The number is named after Danish physicist Martin Knudsen (1871–1949).

In physics, a wave vector is a vector used in describing a wave, with a typical unit being cycle per metre. It has a magnitude and direction. Its magnitude is the wavenumber of the wave, and its direction is perpendicular to the wavefront. In isotropic media, this is also the direction of wave propagation.

<span class="mw-page-title-main">String vibration</span> A wave

A vibration in a string is a wave. Resonance causes a vibrating string to produce a sound with constant frequency, i.e. constant pitch. If the length or tension of the string is correctly adjusted, the sound produced is a musical tone. Vibrating strings are the basis of string instruments such as guitars, cellos, and pianos.

<span class="mw-page-title-main">Mark tree</span> Musical instrument

A mark tree is a percussion instrument used primarily for musical colour. It consists of many small chimes—typically cylinders of solid aluminium or hollow brass tubing 3/8" in diameter—of varying lengths, hung from a bar. They are played by sweeping a finger or stick through the length of the hanging chimes. They are mounted in pitch order to produce rising or falling glissandos.

<span class="mw-page-title-main">Voigt profile</span> Probability distribution

The Voigt profile is a probability distribution given by a convolution of a Cauchy-Lorentz distribution and a Gaussian distribution. It is often used in analyzing data from spectroscopy or diffraction.

In orbital mechanics, mean motion is the angular speed required for a body to complete one orbit, assuming constant speed in a circular orbit which completes in the same time as the variable speed, elliptical orbit of the actual body. The concept applies equally well to a small body revolving about a large, massive primary body or to two relatively same-sized bodies revolving about a common center of mass. While nominally a mean, and theoretically so in the case of two-body motion, in practice the mean motion is not typically an average over time for the orbits of real bodies, which only approximate the two-body assumption. It is rather the instantaneous value which satisfies the above conditions as calculated from the current gravitational and geometric circumstances of the body's constantly-changing, perturbed orbit.

<span class="mw-page-title-main">Helmholtz resonance</span> Phenomenon of air resonance in a cavity

Helmholtz resonance, also known as wind throb, refers to the phenomenon of air resonance in a cavity, an effect named after the German physicist Hermann von Helmholtz. This type of resonance occurs when air is forced in and out of a cavity, causing the air inside to vibrate at a specific natural frequency. The principle is widely observable in everyday life, notably when blowing across the top of a bottle, resulting in a resonant tone.

<span class="mw-page-title-main">Acoustic resonance</span> Resonance phenomena in sound and musical devices

Acoustic resonance is a phenomenon in which an acoustic system amplifies sound waves whose frequency matches one of its own natural frequencies of vibration.

<span class="mw-page-title-main">Mersenne's laws</span> Laws describing the frequency of oscillation of a stretched string

Mersenne's laws are laws describing the frequency of oscillation of a stretched string or monochord, useful in musical tuning and musical instrument construction.

In the theory of special functions, Whipple's transformation for Legendre functions, named after Francis John Welsh Whipple, arise from a general expression, concerning associated Legendre functions. These formulae have been presented previously in terms of a viewpoint aimed at spherical harmonics, now that we view the equations in terms of toroidal coordinates, whole new symmetries of Legendre functions arise.

In nonideal fluid dynamics, the Hagen–Poiseuille equation, also known as the Hagen–Poiseuille law, Poiseuille law or Poiseuille equation, is a physical law that gives the pressure drop in an incompressible and Newtonian fluid in laminar flow flowing through a long cylindrical pipe of constant cross section. It can be successfully applied to air flow in lung alveoli, or the flow through a drinking straw or through a hypodermic needle. It was experimentally derived independently by Jean Léonard Marie Poiseuille in 1838 and Gotthilf Heinrich Ludwig Hagen, and published by Poiseuille in 1840–41 and 1846. The theoretical justification of the Poiseuille law was given by George Stokes in 1845.

In probability theory and directional statistics, a wrapped Lévy distribution is a wrapped probability distribution that results from the "wrapping" of the Lévy distribution around the unit circle.

References

  1. Catherine Johns (1982). Sex or Symbol?: Erotic Images of Greece and Rome. Taylor & Francis. pp. 66–68.
  2. "Bronze phallic wind chime (tintinabulum)". British Museum.
  3. Westcott, Wendell (1970). "Chapter 1: Bells of the Orient". Bells and Their Music. G.P. Putnam. LCCN   76077762.
  4. Amano, Kenichi; Kawakami, Takashi (May 28, 2007). "Foreign tourists find real Tokyo". The Nikkei Weekly.
  5. Sethares, William A. (2005). Tuning, Timbre, Spectrum, Scale, p.115. ISBN   9781846281136.
  6. "Physics of Music: Make your own wind chimes". Michigan Tech. Michigan Tech. 2009-01-08.
  7. 1 2 3 4 5 "Giant, Ominous Wind Chimes". Milwaukee Makerspace. 2011-09-29.
  8. "Wind chimes". Virginia Tech Multimedia Music Dictionary. Virginia Tech. 2009-01-08.
  9. MacKenzie, Peggy (August 25, 2007). "Crafted silver chimes hit right note; Retooled cutlery the meat and potatoes of woman's successful small business". The Toronto Star. pp. H05.
  10. Hite, Lee. "Say it with Chimes" . Retrieved 2016-08-01.
  11. Anderman, Joan (October 15, 2008). "Connecting with TV on the Radio". The Boston Globe. pp. B07.