Windsor Railway Bridge

Last updated

Windsor Railway Bridge
Brunelwindsorbridge.jpg
Windsor Railway Bridge, downstream side, looking towards Windsor
Coordinates 51°29′12.5″N0°37′04.5″W / 51.486806°N 0.617917°W / 51.486806; -0.617917
Carries Slough to Windsor & Eton Line
Crosses River Thames
Locale Windsor
Maintained by Network Rail
Characteristics
Design Bowstring
MaterialWrought Iron
Width202 feet (62 m) [1]
Height17 feet 9 inches (5.41 m) [2]
No. of spans1
History
Designer Brunel
Opened1849 [1]
Location
Windsor Railway Bridge
The brick viaduct carrying the GWR line into Windsor, looking east towards Eton College GWR-eton.jpg
The brick viaduct carrying the GWR line into Windsor, looking east towards Eton College

Windsor Railway Bridge is a wrought iron 'bow and string' bridge in Windsor, Berkshire, crossing the River Thames on the reach between Romney Lock and Boveney Lock. It carries the branch line between Slough and Windsor.

Contents

The Windsor Railway Bridge was designed by the famed British civil engineer Isambard Kingdom Brunel, and is considered to be a forerunner to his last major work, the Royal Albert Bridge. It was built during the 1840s to carry the Slough to Windsor & Eton Line of the Great Western Railway (GWR). On account of concerns raised by the Provost of Eton College, the bridge had to cross the river while keeping it unobstructed in its entirety. Construction of the railway was subsequently authorised during 1848 and proceeded at a rapid pace, the line and bridge alike being first opened to traffic on 8 October 1849.

During the early 1860s, the original wooden approach viaducts were replaced by arched brick counterparts. During 1908, the bridge's cast iron piles were replaced by brick abutments, somewhat shortening its span to 184 ft 6in, as well as the replacement of both cross girders and rail bearers with steel equivalents. [3] While the Windsor Railway Bridge was originally built to carry a twin-track arrangement, only a single line has crossed the bridge since the railway was singled as a rationalisation measure during the 1960s. In 1975, the bridge became a Grade II* listed structure.

History

The construction of what would become Slough to Windsor & Eton Line was an early ambition of the Great Western Railway (GWR), but had been delayed and thus unable to be included in the original act of Parliament obtained by the company on account of objections raised by the Provost of the nearby Eton College. [3] Parliamentary approval for the line was finally issued in 1848, but was accompanied by a provision for the protection of amenities pertaining to the college, which included the requirement that the River Thames be kept clear where the railway crossed it, thus necessitating advanced design and materials. [3]

Irrespective of this complication, construction of the line and bridge alike commenced almost immediately. [3] The contractor appointed to build the bridge was a Mr George Hannet. On 8 October 1849, the completed route was opened to traffic. [3]

Since its completion, numerous refurbishments and alternations to the original structure have been performed. Between 1861 and 1865, the original wooden trestle viaducts forming the approaches to the Windsor Railway Bridge were replaced by arched brick equivalents. [3] During 2019, the viaduct was visually restored, removing graffiti. [4]

Design

The Windsor Railway Bridge is a single-span structure, comprising three bowstring trusses which formed two bays, each carrying one of the original pair of tracks traversing the bridge. [5] It is believed to be the world's oldest wrought iron railway bridge that remains in regular service. [6] Designed by Isambard Kingdom Brunel, the bridge has been considered to be a forerunner of Brunel's final masterpiece, the Royal Albert Bridge at Saltash. [1] [3] Due to its historical and engineering significance, the Windsor Railway Bridge became a Grade II* listed structure in 1975. [1]

As originally built, the bridge had a skewed span of 202 ft, which were carried on six ft diameter cast iron piles filled with concrete. [3] However, during 1908, these piles were replaced by several brick abutments; this alteration also had the effect of reducing the bridge's span to 184 ft 6in. In conjunction with this work, other refurbishments of the bridge were carried out, such as the replacement of both cross girders and rail bearers with steel counterparts. [3]

Although the bridge bore two tracks, that on the upstream (west) side was removed as one of the rationalisations of the 1960s. [3] The resulting space has since been reused for a sewer and a water main. [3]

The accessing southern viaduct is 2,000 feet (610 m) to Windsor and Eton Central, which is at street level as to its castle end where the land is at similar height; the northern is 3,240 feet (990 m), thus a single plain-spanning bridge-viaduct measures more than 1 mile (1.6 km).

See also

Related Research Articles

<span class="mw-page-title-main">Royal Albert Bridge</span> Railway bridge spanning the River Tamar in southwest England

The Royal Albert Bridge is a railway bridge which spans the River Tamar in England between Plymouth, Devon and Saltash, Cornwall. Its unique design consists of two 455-foot (138.7 m) lenticular iron trusses 100 feet (30.5 m) above the water, with conventional plate-girder approach spans. This gives it a total length of 2,187.5 feet (666.8 m). It carries the Cornish Main Line railway in and out of Cornwall. It is adjacent to the Tamar Bridge which opened in 1961 to carry the A38 road.

<span class="mw-page-title-main">Windsor & Eton Central railway station</span>

Windsor & Eton Central station is one of two terminal stations serving the town of Windsor, Berkshire, England. Although a small part is still a railway station, most of the station building has been converted into a tourist-oriented shopping centre, called Windsor Royal Shopping. It is situated on Thames Street, almost immediately opposite Castle Hill, the main public entrance to Windsor Castle.

<span class="mw-page-title-main">Chepstow Railway Bridge</span> Bridge spanning the River Wye between England and Wales

<span class="mw-page-title-main">Richmond Railway Bridge</span> Bridge in Richmond

Richmond Railway Bridge in Richmond, south-west London, crosses the River Thames immediately upstream of Twickenham Bridge. It carries National Rail services operated by South Western Railway (SWR) on the Waterloo to Reading Line, and lies between Richmond and St. Margarets stations. The bridge was amongst the first railway crossings of the Thames.

<span class="mw-page-title-main">Barnes Railway Bridge</span> Bridge in London, England

Barnes Railway Bridge is a Grade II listed railway bridge in the London Borough of Richmond upon Thames and the London Borough of Hounslow. It crosses the River Thames in London in a northwest to southeast direction at Barnes. It carries the South Western Railway's Hounslow Loop Line, and lies between Barnes Bridge and Chiswick stations. It can also be crossed on foot, and is one of only three bridges in London to combine pedestrian and rail use; the others being Hungerford Bridge and Golden Jubilee Bridges and Fulham Railway Bridge.

<span class="mw-page-title-main">Bridgwater railway station</span> Railway station in Somerset, England

Bridgwater railway station serves the town of Bridgwater in Somerset, England. It is on the Bristol to Taunton Line and is operated by Great Western Railway. It is 151 miles 47 chains from the zero point at London Paddington via Box.

<span class="mw-page-title-main">Gatehampton Railway Bridge</span> Bridge in Lower Basildon, Berkshire

Gatehampton Railway Bridge, otherwise referred to as Gatehampton Viaduct, is a railway bridge carrying the Great Western Main Line over the River Thames in Lower Basildon, Berkshire, England. It takes the line between the stations at Goring and Streatley and Pangbourne, and crosses the Thames on the reach between Whitchurch Lock and Goring Lock.

<span class="mw-page-title-main">Isambard Kingdom Brunel</span> British mechanical and civil engineer (1806–1859)

Isambard Kingdom Brunel was a British civil engineer and mechanical engineer who is considered "one of the most ingenious and prolific figures in engineering history", "one of the 19th-century engineering giants", and "one of the greatest figures of the Industrial Revolution, [who] changed the face of the English landscape with his groundbreaking designs and ingenious constructions". Brunel built dockyards, the Great Western Railway (GWR), a series of steamships including the first purpose-built transatlantic steamship, and numerous important bridges and tunnels. His designs revolutionised public transport and modern engineering.

<span class="mw-page-title-main">Landore Viaduct</span>

The Landore viaduct is a railway viaduct over the Swansea valley and the River Tawe at Landore in south Wales. It provides a link between Swansea city center and the West Wales Line to the South Wales Main Line. The valley crossing provides a panoramic view of Landore, Kilvey Hill, the Liberty Stadium and the Swansea Enterprise Park.

<span class="mw-page-title-main">Loughor Viaduct</span> Bridge over River Loughor, south Wales

The Loughor railway viaduct carries the West Wales Line across the River Loughor. It is adjacent, and runs parallel to, the Loughor road bridge. The 1880 viaduct was granted Grade II listed building status. Before it was demolished in early 2013, the viaduct was the last remaining timber viaduct designed by Isambard Kingdom Brunel.

<span class="mw-page-title-main">Usk Railway Bridge</span> Bridge in Newport

The Usk Railway Bridge is a railway viaduct in Newport city centre, Wales. It crosses the River Usk in an east—west direction, carrying the Great Western Main Line.

<span class="mw-page-title-main">Moulsford Railway Bridge</span> Bridge in Moulsford

Moulsford Railway Bridge, also known locally as "Four Arches" bridge, is a pair of parallel bridges located a little to the north of Moulsford and South Stoke in Oxfordshire, UK. It carries the Great Western Main Line from Paddington, London to Wales and the West across the River Thames. The bridge lies between the stations at Goring & Streatley and Cholsey, and crosses the Thames at an oblique angle on the reach between Cleeve Lock and Benson Lock.

<span class="mw-page-title-main">Wharncliffe Viaduct</span> Bridge in Hanwell, London

The Wharncliffe Viaduct is a brick-built viaduct that carries the Great Western Main Line railway across the Brent Valley, between Hanwell and Southall, Ealing, UK, at an elevation of 20 metres (66 ft). The viaduct, built in 1836–7, was constructed for the opening of the Great Western Railway (GWR). It is situated between Southall and Hanwell stations, the latter station being only a very short distance away to the east.

<span class="mw-page-title-main">Black Potts Railway Bridge</span> Bridge in Windsor

Black Potts Railway Bridge carries the railway from London (Waterloo) to Windsor, Berkshire across the River Thames. The Staines to Windsor & Eton Line terminates immediately after the bridge at Windsor and Eton Riverside railway station. The bridge crosses the Thames on the reach above Old Windsor Lock, shortly before Romney Lock.

<span class="mw-page-title-main">Nuneham Viaduct</span> Railway bridge in Oxfordshire, England

Nuneham Viaduct, also known as Nuneham Railway Bridge and the Black Bridge is near the town of Abingdon-on-Thames in Oxfordshire, England. It is a two-span, bowstring truss bridge that carries the Didcot to Oxford section of the Cherwell Valley Line across the River Thames between Abingdon Lock and Sandford Lock. Its name is derived from the neighbouring Nuneham House. The total length is 99 yards (91 m); the southern and northern ends are respectively 57 miles 24 chains (92.22 km) and 57 miles 29 chains (92.32 km) from Paddington.

<span class="mw-page-title-main">Baulk road</span> Railway track on undergirding timber bearings

Baulk road is the name given to a type of railway track or 'rail road' that is formed using rails carried on continuous timber bearings, as opposed to the more familiar 'cross-sleeper' track that uses closely spaced sleepers or ties to give intermittent support to stronger rails.

<span class="mw-page-title-main">Gaunless Bridge</span> Bridge in County Durham, England

Gaunless Bridge was a railway bridge on the Stockton and Darlington Railway. It was completed in 1823 and is one of the first railway bridges to be constructed of iron and the first to use an iron truss. It is also of an unusual lenticular truss design.

<span class="mw-page-title-main">Balloon flange girder</span>

A balloon flange girder or (colloquially) balloon topper is a form of vertical I-beam wrought iron plate girder, where the top flange, instead of being a simple flat plate, is extended into a hollow tube. When a girder is subjected to a positive bending moment the top flange acts in compression making a flat plate flange more susceptible to local buckling than the balloon flange is.

<span class="mw-page-title-main">Meldon Viaduct</span> Bridge in United Kingdom

Meldon Viaduct is a disused railway viaduct crossing the West Okement River at Meldon, 2.5 miles (4.0 km) south-west of Okehampton, on the edge of Dartmoor in Devon, South West England. This truss bridge was constructed from wrought iron, instead of stone or brick arches. It opened in 1874 for a single track; in 1879 its width was doubled for a second track. Although regular services were withdrawn in 1968, the bridge was used for shunting by a local quarry. In the 1990s the remaining single track was removed.

<span class="mw-page-title-main">Long Cove Creek railway viaducts, Lewisham</span> Bridge in New South Wales, Australia

The Long Cove Creek railway viaducts are heritage-listed railway viaducts which carry the Main Suburban railway line over Long Cove Creek between the suburbs of Lewisham and Summer Hill in Sydney, New South Wales, Australia. The viaducts were designed and built by the New South Wales Government Railways. The property is owned by Transport Asset Holding Entity, an agency of the Government of New South Wales. It was added to the New South Wales State Heritage Register on 2 April 1999.

References

  1. 1 2 3 4 Historic England. "Details from listed building database (1319297)". National Heritage List for England . Retrieved 16 September 2008.
  2. River Thames Alliance. Bridge heights on the River Thames.
  3. 1 2 3 4 5 6 7 8 9 10 11 "River Thames Bridge, GNR Windsor Branch". engineering-timelines.com. Retrieved 31 July 2021.
  4. Horsfield, Amy (29 August 2019). "'HELCH' graffiti tag appears on railway viaduct overlooking Windsor Castle". windsorexpress.co.uk.
  5. Humber, William (1870). A Complete Treatise on Cast and Wrought Iron Bridge Construction; Description of Windsor Bridge (1849), pp. 245-246. Lockwood & Co., London. Retrieved 3 July 2012.
  6. Isambard Kingdom Brunel
Next crossing upstream River Thames Next crossing downstream
Queen Elizabeth Bridge (road)Windsor Railway Bridge Windsor Bridge