Zirconocene dichloride

Last updated
Zirconocene dichloride
Zirconocene-dichloride-2D-skeletal.png
Zirconocene-dichloride-from-xtal-3D-balls.png
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.013.697 OOjs UI icon edit-ltr-progressive.svg
PubChem CID
UNII
  • InChI=1S/2C5H5.2ClH.Zr/c2*1-2-4-5-3-1;;;/h2*1-5H;2*1H;/q2*-1;;;+4/p-2 X mark.svgN
    Key: QMBQEXOLIRBNPN-UHFFFAOYSA-L X mark.svgN
  • InChI=1/2C5H5.2ClH.Zr/c2*1-2-4-5-3-1;;;/h2*1-5H;2*1H;/q2*-1;;;+4/p-2
    Key: QMBQEXOLIRBNPN-NUQVWONBAX
  • [cH-]1cccc1.[cH-]1cccc1.[Cl-].[Cl-].[Zr+4]
Properties
C10H10Cl2Zr
Molar mass 292.31 g·mol−1
Appearancewhite solid
Soluble (Hydrolysis)
Hazards
Safety data sheet (SDS) CAMEO Chemicals MSDS
Related compounds
Related compounds
Titanocene dichloride
Hafnocene dichloride
Vanadocene dichloride
Niobocene dichloride
Tantalocene dichloride
Tungstenocene dichloride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
X mark.svgN  verify  (what is  Yes check.svgYX mark.svgN ?)

Zirconocene dichloride is an organozirconium compound composed of a zirconium central atom, with two cyclopentadienyl and two chloro ligands. It is a colourless diamagnetic solid that is somewhat stable in air.

Contents

Preparation and structure

Zirconocene dichloride may be prepared from zirconium(IV) chloride-tetrahydrofuran complex and sodium cyclopentadienide:

ZrCl4(THF)2 + 2 NaCp → Cp2ZrCl2 + 2 NaCl + 2 THF

The closely related compound Cp2ZrBr2 was first described by Birmingham and Wilkinson. [1]

The compound is a bent metallocene: the Cp rings are not parallel, the average Cp(centroid)-M-Cp angle being 128°. The Cl-Zr-Cl angle of 97.1° is wider than in niobocene dichloride (85.6°) and molybdocene dichloride (82°). This trend helped to establish the orientation of the HOMO in this class of complex. [2]

Reactions

Schwartz's reagent

Zirconocene dichloride reacts with lithium aluminium hydride to give Cp2ZrHCl Schwartz's reagent:

(C5H5)2ZrCl2 + 1/4 LiAlH4 → (C5H5)2ZrHCl + 1/4 LiAlCl4

Since lithium aluminium hydride is a strong reductant, some over-reduction occurs to give the dihydrido complex, Cp2ZrH2; treatment of the product mixture with methylene chloride converts it to Schwartz's reagent. [3]

Negishi reagent

Zirconocene dichloride can also be used to prepare the Negishi reagent, Cp2Zr(η2-butene), which can be used as a source of Cp2Zr in oxidative cyclisation reactions. The Negishi reagent is prepared by treating zirconocene dichloride with n-BuLi, leading to replacement of the two chloride ligands with butyl groups. The dibutyl compound subsequently undergoes beta-hydride elimination to give one η2-butene ligand, with the other butyl ligand promptly lost as butane via reductive elimination. [4]

Reaction of zirconocene dichloride with n-BuLi.svg

Carboalumination

Zirconocene dichloride catalyzes the carboalumination of alkynes by trimethylaluminium to give a (alkenyl)dimethylalane, a versatile intermediate for further cross coupling reactions for the synthesis of stereodefined trisubstituted olefins. For example, α-farnesene can be prepared as a single stereoisomer by carboalumination of 1-buten-3-yne with trimethylaluminium, followed by palladium-catalyzed coupling of the resultant vinylaluminium reagent with geranyl chloride. [5]

Synthesis of farnesene 2.png

The use of trimethylaluminium for this reaction results in exclusive formation of the syn-addition product and, for terminal alkynes, the anti-Markovnikov addition with high selectivity (generally > 10:1). Unfortunately, the use of higher alkylaluminium reagents results in lowered yield, due to the formation of the hydroalumination product (via β-hydrogen elimination of the alkylzirconium intermediate) as side product, and only moderate regioselectivities. [6] Thus, practical applications of the carboalumination reaction are generally confined to the case of methylalumination. Although this is a major limitation, the synthetic utility of this process remains significant, due to the frequent appearance of methyl-substituted alkenes in natural products.

Zr-walk

Zirconocene dichloride together with a reducing reagent can form the zirconocene hydride catalyst in situ, which allows a positional isomerization (so-called "Zr-walk" [7] ), and ends up with a cleavage of allylic bonds. Not only individual steps under stoichiometric conditions were described with Schwartz reagent, [8] and Negishi reagent, [9] but also catalytic applications on alkene hydroaluminations, [10] radical cyclisation, [11] polybutadiene cleavage, [12] and reductive removal of functional groups [13] were reported.

Reductive removal of ether group Reductive removal of ether group.png
Reductive removal of ether group

Related Research Articles

<span class="mw-page-title-main">Metallocene</span> Type of compound having a metal center

A metallocene is a compound typically consisting of two cyclopentadienyl anions (C
5
H
5
, abbreviated Cp) bound to a metal center (M) in the oxidation state II, with the resulting general formula (C5H5)2M. Closely related to the metallocenes are the metallocene derivatives, e.g. titanocene dichloride or vanadocene dichloride. Certain metallocenes and their derivatives exhibit catalytic properties, although metallocenes are rarely used industrially. Cationic group 4 metallocene derivatives related to [Cp2ZrCH3]+ catalyze olefin polymerization.

<span class="mw-page-title-main">Titanocene dichloride</span> Chemical compound

Titanocene dichloride is the organotitanium compound with the formula (η5-C5H5)2TiCl2, commonly abbreviated as Cp2TiCl2. This metallocene is a common reagent in organometallic and organic synthesis. It exists as a bright red solid that slowly hydrolyzes in air. It shows antitumour activity and was the first non-platinum complex to undergo clinical trials as a chemotherapy drug.

<span class="mw-page-title-main">Zirconium(IV) chloride</span> Chemical compound

Zirconium(IV) chloride, also known as zirconium tetrachloride, is an inorganic compound frequently used as a precursor to other compounds of zirconium. This white high-melting solid hydrolyzes rapidly in humid air.

<span class="mw-page-title-main">Schwartz's reagent</span> Chemical compound

Schwartz's reagent is the common name for the organozirconium compound with the formula (C5H5)2ZrHCl, sometimes called zirconocene hydrochloride or zirconocene chloride hydride, and is named after Jeffrey Schwartz, a chemistry professor at Princeton University. This metallocene is used in organic synthesis for various transformations of alkenes and alkynes.

<span class="mw-page-title-main">Organotitanium chemistry</span>

Organotitanium chemistry is the science of organotitanium compounds describing their physical properties, synthesis, and reactions. Organotitanium compounds in organometallic chemistry contain carbon-titanium chemical bonds. They are reagents in organic chemistry and are involved in major industrial processes.

Niobocene dichloride is the organometallic compound with the formula (C5H5)2NbCl2, abbreviated Cp2NbCl2. This paramagnetic brown solid is a starting reagent for the synthesis of other organoniobium compounds. The compound adopts a pseudotetrahedral structure with two cyclopentadienyl and two chloride substituents attached to the metal. A variety of similar compounds are known, including Cp2TiCl2.

<span class="mw-page-title-main">Organoaluminium chemistry</span>

Organoaluminium chemistry is the study of compounds containing bonds between carbon and aluminium. It is one of the major themes within organometallic chemistry. Illustrative organoaluminium compounds are the dimer trimethylaluminium, the monomer triisobutylaluminium, and the titanium-aluminium compound called Tebbe's reagent. The behavior of organoaluminium compounds can be understood in terms of the polarity of the C−Al bond and the high Lewis acidity of the three-coordinated species. Industrially, these compounds are mainly used for the production of polyolefins.

A carbometallation is any reaction where a carbon-metal bond reacts with a carbon-carbon π-bond to produce a new carbon-carbon σ-bond and a carbon-metal σ-bond. The resulting carbon-metal bond can undergo further carbometallation reactions or it can be reacted with a variety of electrophiles including halogenating reagents, carbonyls, oxygen, and inorganic salts to produce different organometallic reagents. Carbometallations can be performed on alkynes and alkenes to form products with high geometric purity or enantioselectivity, respectively. Some metals prefer to give the anti-addition product with high selectivity and some yield the syn-addition product. The outcome of syn and anti- addition products is determined by the mechanism of the carbometallation.

<span class="mw-page-title-main">Organozirconium and organohafnium chemistry</span>

Organozirconium chemistry is the science of exploring the properties, structure, and reactivity of organozirconium compounds, which are organometallic compounds containing chemical bonds between carbon and zirconium. Organozirconium compounds have been widely studied, in part because they are useful catalysts in Ziegler-Natta polymerization.

In organometallic chemistry, a transition metal indenyl complex is a coordination compound that contains one or more indenyl ligands. The indenyl ligand is formally the anion derived from deprotonation of indene. The η5-indenyl ligand is related to the η5cyclopentadienyl anion (Cp), thus indenyl analogues of many cyclopentadienyl complexes are known. Indenyl ligands lack the 5-fold symmetry of Cp, so they exhibit more complicated geometries. Furthermore, some indenyl complexes also exist with only η3-bonding mode. The η5- and η3-bonding modes sometimes interconvert.

In organometallic chemistry, bent metallocenes are a subset of metallocenes. In bent metallocenes, the ring systems coordinated to the metal are not parallel, but are tilted at an angle. A common example of a bent metallocene is Cp2TiCl2. Several reagents and much research is based on bent metallocenes.

The zirconium-catalyzed asymmetric carbo-alumination reaction was developed by Nobel laureate Ei-ichi Negishi. It facilitates the chiral functionalization of alkenes using organoaluminium compounds under the influence of chiral bis-indenylzirconium catalysts. In a first step the alkene inserts into an Al-C bond of the reagent, forming a new chiral organoaluminium compound in which the aluminium atom occupies the lesser hindered position. This intermediate is usually oxidized by oxygen to form the corresponding chiral alcohol. The reaction can also be applied to dienes, where the least sterically hindered double bond is attacked selectively.

Molybdocene dichloride is the organomolybdenum compound with the formula (η5-C5H5)2MoCl2 and IUPAC name dichlorobis(η5-cyclopentadienyl)molybdenum(IV), and is commonly abbreviated as Cp2MoCl2. It is a brownish-green air- and moisture-sensitive powder. In the research laboratory, it is used to prepare many derivatives.

<span class="mw-page-title-main">Cyclopentadienyliron dicarbonyl dimer</span> Chemical compound

Cyclopentadienyliron dicarbonyl dimer is an organometallic compound with the formula [(η5-C5H5)Fe(CO)2]2, often abbreviated to Cp2Fe2(CO)4, [CpFe(CO)2]2 or even Fp2, with the colloquial name "fip dimer". It is a dark reddish-purple crystalline solid, which is readily soluble in moderately polar organic solvents such as chloroform and pyridine, but less soluble in carbon tetrachloride and carbon disulfide. Cp2Fe2(CO)4 is insoluble in but stable toward water. Cp2Fe2(CO)4 is reasonably stable to storage under air and serves as a convenient starting material for accessing other Fp (CpFe(CO)2) derivatives (described below).

<span class="mw-page-title-main">Molybdocene dihydride</span> Organomolybdenum compound

Molybdocene dihydride is the organomolybdenum compound with the formula (η5-C5H5)2MoH2. Commonly abbreviated as Cp2MoH2, it is a yellow air-sensitive solid that dissolves in some organic solvents.

<span class="mw-page-title-main">Zirconocene</span> Chemical compound

Zirconocene is a hypothetical compound with 14 valence electrons, which has not been observed or isolated. It is an organometallic compound consisting of two cyclopentadienyl rings bound on a central zirconium atom. A crucial question in research is what kind of ligands can be used to stabilize the Cp2ZrII metallocene fragment to make it available for further reactions in organic synthesis.

<span class="mw-page-title-main">Rosenthal's reagent</span>

Rosenthal's reagent is a metallocene bis(trimethylsilyl)acetylene complex with zirconium (Cp2Zr) or titanium (Cp2Ti) used as central atom of the metallocene fragment Cp2M. Additional ligands such as pyridine or THF are commonly used as well. With zirconium as central atom and pyridine as ligand, a dark purple to black solid with a melting point of 125–126 °C is obtained. Synthesizing Rosenthal's reagent of a titanocene source yields golden-yellow crystals of the titanocene bis(trimethylsilyl)acetylene complex with a melting point of 81–82 °C. This reagent enables the generation of the themselves unstable titanocene and zirconocene under mild conditions.

<span class="mw-page-title-main">(Cyclopentadienyl)zirconium trichloride</span> Chemical compound

(Cyclopentadienyl)zirconium trichloride is an organozirconium compound with the formula (C5H5)ZrCl3. It a moisture-sensitive white solid. The compound adopts a polymeric structure. The compound has been well studied spectroscopically.

<span class="mw-page-title-main">Hafnocene dichloride</span> Chemical compound

Hafnocene dichloride is the organohafnium compound with the formula (C5H5)2HfCl2. It is a white solid that is sparingly soluble in some organic solvents. The lighter homologues zirconacene dichloride and titanocene dichloride have received much more attention. While hafnocene is only of academic interest, some more soluble derivatives are precatalysts for olefin polymerization. Moreso than the Zr analogue, this compound is highly resistant to reduction.

<span class="mw-page-title-main">Zirconocene bis(trimethylsilyl)acetylene pyridine</span>

Zirconocene bis(trimethylsilyl)acetylene pyridine is an organozirconium metallocene compound that appears as a dark purple solid with a melting point of 125-126°C. Also referred to as Rosenthal’s reagent, this complex features two cyclopentadienyl ligands, a bis(trimethylsilyl)acetylene ligand and a coordinating pyridine molecule. Named after the work of Uwe Rosenthal, this compound with various coordinating solvents replacing the pyridine and the solvent free titanium analogue all share the title of Rosenthal’s reagent. The general reactivity for this version of Rosenthal’s reagent differs from its titanium counterpart and is most often reacted with alkynes to replace the zirconocyclopropene with a larger zirconacyclopentadiene rings.

References

  1. G. Wilkinson and J. M. Birmingham (1954). "Bis-cyclopentadienyl Compounds of Ti, Zr, V, Nb and Ta". J. Am. Chem. Soc. 76 (17): 4281–4284. doi:10.1021/ja01646a008.
  2. K. Prout, T. S. Cameron, R. A. Forder, and in parts S. R. Critchley, B. Denton and G. V. Rees "The crystal and molecular structures of bent bis-π-cyclopentadienyl-metal complexes: (a) bis-π-cyclopentadienyldibromorhenium(V) tetrafluoroborate, (b) bis-π-cyclopentadienyldichloromolybdenum(IV), (c) bis-π-cyclopentadienylhydroxomethylaminomolybdenum(IV) hexafluorophosphate, (d) bis-π-cyclopentadienylethylchloromolybdenum(IV), (e) bis-π-cyclopentadienyldichloroniobium(IV), (f) bis-π-cyclopentadienyldichloromolybdenum(V) tetrafluoroborate, (g) μ-oxo-bis[bis-π-cyclopentadienylchloroniobium(IV)] tetrafluoroborate, (h) bis-π-cyclopentadienyldichlorozirconium" Acta Crystallogr. 1974, volume B30, pp. 2290–2304. doi : 10.1107/S0567740874007011
  3. S. L. Buchwald; S. J. LaMaire; R. B.; Nielsen; B. T. Watson; S. M. King. "Schwartz's Reagent". Organic Syntheses ; Collected Volumes, vol. 9, p. 162.
  4. Negishi, E.; Takashi, T. (1994). "Patterns of Stoichiometric and Catalytic Reactions of Organozirconium and Related Complexes of Synthetic Interest". Accounts of Chemical Research. 27 (5): 124–130. doi:10.1021/ar00041a002.
  5. "Palladium-Catalyzed Synthesis of 1,4-Dienes by Allylation of Alkenylalanes: α-Farnesene". www.orgsyn.org. Retrieved 2019-11-27.
  6. Huo, Shouquan (2016-09-19), Rappoport, Zvi (ed.), "Carboalumination Reactions", PATAI'S Chemistry of Functional Groups, Chichester, UK: John Wiley & Sons, Ltd, pp. 1–64, doi:10.1002/9780470682531.pat0834, ISBN   978-0-470-68253-1 , retrieved 2021-01-19
  7. Sommer, Heiko; Juliá-Hernández, Francisco; Martin, Ruben; Marek, Ilan (2018-02-08). "Walking Metals for Remote Functionalization". ACS Central Science. 4 (2): 153–165. doi: 10.1021/acscentsci.8b00005 . ISSN   2374-7943. PMC   5833012 . PMID   29532015. S2CID   4389888.
  8. Cénac, Nathalie; Zablocka, Maria; Igau, Alain; Commenges, Gérard; Majoral, Jean-Pierre; Skowronska, Aleksandra (1996-02-20). "Zirconium-Promoted Ring Opening. Scope and Limitations". Organometallics. 15 (4): 1208–1217. doi:10.1021/om950491+. ISSN   0276-7333.
  9. Masarwa, Ahmad; Didier, Dorian; Zabrodski, Tamar; Schinkel, Marvin; Ackermann, Lutz; Marek, Ilan (2013-12-08). "Merging allylic carbon–hydrogen and selective carbon–carbon bond activation". Nature. 505 (7482): 199–203. doi:10.1038/nature12761. ISSN   0028-0836. PMID   24317692. S2CID   205236414.
  10. Negishi; Yoshida (1980). "A novel zirconium- catalyzed hydroalumination of olefins". Tetrahedron Lett. 21 (16): 1501–1504. doi:10.1016/S0040-4039(00)92757-6.
  11. Fujita; Nakamura; Oshima (2001). "Triethylborane-Induced Radical Reaction with Schwartz Reagent". J. Am. Chem. Soc. 123 (13): 3137–3138. doi:10.1021/ja0032428.
  12. Zheng, Jun; Lin, Yichao; Liu, Feng; Tan, Haiying; Wang, Yanhui; Tang, Tao (2012-11-08). "Controlled Chain-Scission of Polybutadiene by the Schwartz Hydrozirconation". Chemistry - A European Journal. 19 (2): 541–548. doi:10.1002/chem.201202942. ISSN   0947-6539. PMID   23139199.
  13. Matt, Christof; Kölblin, Frederic; Streuff, Jan (2019-09-06). "Reductive C–O, C–N, and C–S Cleavage by a Zirconium Catalyzed Hydrometalation/β-Elimination Approach". Organic Letters. 21 (17): 6983–6988. doi:10.1021/acs.orglett.9b02572. ISSN   1523-7060. PMID   31403304. S2CID   199539801.

Further reading