Airbus A318

Last updated

A318
Logo Airbus A318.svg
F-GUGI CDG (49806325246).jpg
An Airbus A318 of Air France, its largest operator.
Role Narrow-body jet airliner
National originMultinational [lower-alpha 1]
Manufacturer Airbus
First flight15 January 2002
Introduction2003 with Frontier Airlines
StatusIn limited service
Primary users Air France
TAROM
Produced2001–2013
Number built80 [1]
Developed from Airbus A319

The Airbus A318 is the smallest and least numerous variant airliner of the Airbus A320 family. The A318 carries 107 to 132 passengers and has a maximum range of 5,750 kilometres (3,100 nautical miles ; 3,570 miles ). [2] Final assembly of the aircraft took place in Hamburg, Germany. It is intended primarily for short-range service.

Contents

The aircraft shares a common type rating with all other Airbus A320 family variants, allowing pilots to fly all versions of the aircraft without the need for further training. It is the largest commercial aircraft certified by the European Aviation Safety Agency for steep approach operations, allowing flights at airports such as London City. [3]

The A318 entered service in July 2003 with Frontier Airlines. Relative to other Airbus A320 family variants, it sold only small numbers with total orders for 80 aircraft placed. The type is no longer listed for sale, having been supplanted by the A220 narrowbody. Air France was the largest operator of the Airbus A318. The type has zero accidents.

Development

Background

The first member of the A320 aircraft family was the A320, which first flew on 22 February 1987 after the program was launched in March 1984. [4] The family was soon extended to include the stretched A321 (first delivery 1994), the shortened A319 (first delivery 1996), and the further shortened A318 (first delivery 2003). The A320 family pioneered the use in commercial aircraft of digital fly-by-wire flight control systems, as well as side stick controls.

The Airbus A318 project had its origins in the collaboration among Chinese, Singaporean and European manufacturers. In May 1997, during the visit of French President Jacques Chirac to China, Aviation Industries of China (AVIC), Singapore Technologies Aerospace (STAe), Airbus and Alenia signed a framework agreement that outlined the development of aircraft in the 100-seat range. [5] The AE31X, as it was tentatively dubbed, besides being a global industrial programme would have significantly deepened Sino-European commercial ties. [6] : 24  With development costs estimated to be upwards of $2 billion, AVIC would have a 46 percent stake in the project, STAe 15 percent, and Airbus Industrie Asia 39 percent, the latter of which comprised Airbus and Alenia. [6] : 24  Final assembly would have taken place in China. [7]

The project never went past the exploratory phase. [8] : 56  It comprised two clean-sheet designs – the AE316 and the AE317. The AE316 would have had a length of 31.3 metres (102 ft 8 in), and the AE317, 34.5 m (113 ft 2 in). [9] : 39  The standard versions of both variants had a maximum take-off weight of 49.9 tonnes (110,000 lb) for the smaller version and 54.2 t (119,000 lb) for the AE317, and would have been powered by either BMW Rolls-Royce, CFM International, or Pratt & Whitney turbofan engines. [7] [9] : 39  Range was settled at 3,700 kilometres (2,000 nmi; 2,300 mi) for both standard variants, although there was a higher-gross weight version which had greater range and engine power. [9] : 39  The AE316 and AE317 would have seated a maximum of 105 and 125 passengers in five-abreast seating, respectively. Both would share a flight deck and fly-by-wire flight control system similar to that of the A320 family. [5]

Market research conducted during 1997 revealed that airlines wanted a smaller aircraft in the 70–80-seat range. [10] As the project proceeded, there were increasing disagreements between the Chinese side and Airbus. China wanted a larger aircraft than originally envisioned. In addition, there were difficulties arising out of negotiations about technology transfer and production workshare, and a weak business case. [8] : 56  STAe, having previously expressed doubts about returns on the project, [11] in 1998 withdrew from the project out of the failure between AIA and AVIC to reach an agreement; Airbus and AVIC would cancel the project in July that year. [12] The A318 is believed to have emerged from the AE31X project [13] though an Airbus-only project, named the A319M5 in March 1998, [14] began before the AE31X cancellation. [15]

Design phase

The internal corporate designation, A319M5, was used as early as March 1998, [14] as an A319 derivative with fuselage shortening of 0.79 metres (2 ft 7 in) ahead of the wing and 1.6 m (5 ft 3 in) behind. [15] The final proposal was for an aircraft seating 107 passengers in a two-class layout with a range of 3,350 kilometres (1,810 nmi; 2,080 mi). The aircraft's production took advantage of laser welding, eliminating the necessity for heavy rivets and bolts.

During the design process, the A318 encountered several problems. The first one was the decline in demand for new aircraft following the September 11 attacks. Another was the new Pratt & Whitney turbofan engines, which burned more fuel than expected. By the time CFM International (CFM) had a more efficient engine ready for market, many A318 customers had already backed out, including Air China and British Airways. America West Airlines, which had selected the Pratt & Whitney engines, amended its A318 orders, opting instead for A319 or A320 aircraft. Trans World Airlines cancelled a significant order for fifty A318s after being acquired by American Airlines, which did not operate any A320 family aircraft at the time (although neither did TWA when the order was originally placed). While Airbus was hoping to market the A318 as a regional jet alternative, laws in both the U.S. and Europe have kept it in the same class as larger aircraft for calculating charges such as landing fees, limiting the type's market potential.

The aircraft is powered by two CFM56-5 or Pratt & Whitney PW6000 engines with maximum thrust ratings of between 96 and 106 kilonewtons (21,600 and 23,800 lbf). Launch customers Frontier Airlines and Air France took deliveries in 2003, with Frontier receiving its aircraft in July of that year. The list price of an A318 ranges from $56 to $62 million, and operating costs are between $2,500 and $3,000 for each flight hour. [16]

Orders for the A318 have been relatively slow, but slightly better than for its direct competitor the Boeing 737-600. By 30 September 2017, Airbus had received 80 orders for this model [1] compared to 69 for the 737-600. [17] The sales pace has been influenced by the strong sales of the Bombardier CRJ900 and Embraer E-Jet family. The biggest A318 customers as of 30 September 2017 were governments, executive and private jets (20), Air France (18), Avianca Holdings (15), lessor GE Capital Aviation Services (12) and Frontier Airlines (9). [1]

Further developments

On 10 November 2005 Airbus announced the A318 Elite. The Airbus A318 Elite is aimed at the medium-range market for flights of up to 4,000-nautical-mile (7,400 km; 4,600 mi) range, with a choice of two cabin layouts seating up to 18 passengers, and powered by CFM engines. Comlux Aviation became the launch customer by ordering three A318 Elite aircraft.

In September 2010, Airbus confirmed that from 2013 the Airbus A318 would become available with Sharklets, wingtip devices which reduce lift-induced drag and improve efficiency through reduced fuel consumption. [18] The optional devices, which will also be available on other Airbus A320 family models and are manufactured by Korean Air Aerospace Division, will increase the range of the aircraft to 5,930 kilometres (3,200 nmi; 3,680 mi) – an increase of 185 km (100 nmi; 115 mi) over a standard A318 with 107 seats in a two-class configuration. [18]

When Airbus announced its re-engined A320neo family, the A318 was the only variant that did not have a new engine option. However, Airbus said that a A318neo could be developed in the future should demand arise. [19]

Design

The Airbus A318 is a small commercial, narrow-body (single-aisle) aircraft with a retractable tricycle landing gear and is powered by two wing pylon-mounted turbofan engines. Two suppliers provide turbofan engines for the A318, CFM International with the CFM56-5B engine and Pratt & Whitney with the PW6000 engine. It is a low-wing cantilever monoplane with a conventional tail unit having a single vertical stabilizer and rudder.

Overall, the A318 is over six metres shorter and around 3 t (6,600 lb) lighter than the A320. To compensate for the reduced moment arm, it has a larger vertical stabiliser. While initial concepts depicted the aircraft with a Boeing 737-300-style dorsal fin extension, [20] the final design incorporated a fin tip extension, making it 75 centimetres (30 in) taller than the other A320 variants. Pilots who are trained on the other variants may fly the A318 with no further certification, since it features a common flight deck and the same type rating as its sister aircraft. The A318 is also referred to as the A318-100. [21]

The A318 is available with a variety of different maximum take-off weights (MTOW) ranging from a 59 tonnes (130,000 lb), 2,750 kilometres (1,480 nmi; 1,710 mi) base model to a 68 t (150,000 lb), 6,000 km (3,200 nmi; 3,700 mi) version. When equipped with CFM56-5B8/P engines, the A318 is available with a 56 or 68 t (123,000 or 150,000 lb) MTOW. When equipped with CFM56-5B9/P engines, the A318 is available with a 59 or 68 t (130,000 or 150,000 lb) MTOW. [22] The lower MTOW enables it to operate regional routes economically while sacrificing range and the higher MTOW allows it to complement other members of the A320 family on marginal routes. The lighter weight of the A318 gives it an operating range 10% greater than the A320, allowing it to serve some routes that the A320 would be unable to: London – New York, Perth–Auckland and Singapore–Tokyo, for instance. Its main use for airlines, however, is on short, low-density hops between medium-sized cities.

Steep approach capability

British Airways Airbus A318, with doors L2 and R2 (overwing exits) plugged, at London City Airport. British Airways (G-EUNA) Airbus A318 at London City Airport.jpg
British Airways Airbus A318, with doors L2 and R2 (overwing exits) plugged, at London City Airport.
Two British Airways Boeing 747-400s (left) and one Airbus A318 (right) at New York-JFK Airbus A318 of British Airways at J.F.K. International Airport New York (USA).jpg
Two British Airways Boeing 747-400s (left) and one Airbus A318 (right) at New York–JFK

In March 2006, the European Aviation Safety Agency (EASA) certified a modified control software enhancement to the Airbus A318 designed to allow the aircraft to perform steep approaches. [23] The aircraft is the largest commercial aircraft certified by EASA for steep approach operations. [3] The software modifies the control laws of the aircraft when the steep approach function is selected by the crew, by automatically deploying some of the spoiler panels to provide additional drag when the aircraft is in the landing configuration. [23] It also provides alternative aural alerts to the crew and modifies spoiler deployment automatically below 37 metres (120 ft) on landing. [23] The A318 steep approach procedure allows the aircraft to perform approaches at descent angles of up to 5.5°, as opposed to the standard 3° for a normal approach. [3]

A test flight was conducted in May 2006 to prove the aircraft's steep approach and short runway performance by landing at London City Airport, where such steep approaches are required. The test flight also confirmed the aircraft's compatibility with the limited maneuvering and parking space at that airport. [23] Subsequently, in August 2009 [24] Airbus delivered the first A318 with steep approach capability to British Airways, which began operating the route the following month as its Club World London City service, eventually having two such aircraft capable of flights between London City Airport and John F. Kennedy International Airport in New York. On the westbound leg from London, a stopover is necessary for refueling, which occurs at Shannon Airport, Ireland because weight restrictions are necessary in order to take off within the existing short runway length of London City Airport. On the eastbound leg from New York this limitation is not present and the aircraft can take all the fuel needed for the transatlantic route to London. As of November 2017, only one aircraft was serving the route, operated in a 32-seat all-business-class configuration. [25] The second aircraft was retired on 31 July 2020, following the COVID-19 pandemic which deemed such type uneconomical. [26]

Operational history

Frontier Airlines was the first A318 operator. Airbus A318-111, Frontier Airlines AN1393354.jpg
Frontier Airlines was the first A318 operator.

Although final assembly of A320 family aircraft takes place in Toulouse, France; Hamburg, Germany; Tianjin, China; and Mobile, Alabama, US, final assembly of the Airbus A318 was in Hamburg, Germany. [27] The maiden flight of the Airbus A318 took place from Finkenwerder airfield in Hamburg on 15 January 2002. [28] The first customer delivery was on 22 July 2003 to Frontier Airlines. [29]

As of 30 September 2017, 67 A318s remained in service with five airlines, in addition to governments, executive and private jets and undisclosed operators. [1] Frontier Airlines, the launch customer that acquired A318 aircraft between 2003 and 2007, had retired their last A318 by 2013. [30]

Operators

As of February 2024, Airbus A318 operators are: [1]

OperatorIn Operation
Air France 6
TAROM 4
Governments, Executive and Private Jets18
Undisclosed operators30
Total58

Orders and deliveries

OrdersDeliveries
TypeTotalBacklog201420132012201120102009200820072006200520042003
A31881——23226131789109

Data through end of September 2017. Updated 7 October 2017. [1]

Specifications

Airbus A318 specifications [2]
Cockpit crewTwo
Exit Limit136 [31] [32]
1-class max. seating [33] 132 at 29–30 in (74–76 cm) pitch
1-class, typical [33] 117 at 32 in (81 cm) pitch
2-class, typical [33] 107 (8F at 38 in (97 cm) pitch, 99Y at 32 in (81 cm))
Cargo capacity21.2 m3 (750 cu ft)
Length31.44 m (103 ft 2 in)
Wingspan 34.10 m (111 ft 11 in)
Wing area122.4 m2 (1,318 sq ft) [34]
Wing sweepback25° [34]
Tail height12.56 m (41 ft 2 in)
Cabin width3.70 m (12 ft 2 in)
Fuselage width3.95 m (13 ft)
Operating empty weight 39,500 kg (87,100 lb) [33]
Maximum zero-fuel weight (MZFW)54,500 kg (120,200 lb)
Maximum landing weight (MLW)57,500 kg (126,800 lb)
Maximum take-off weight (MTOW)68,000 kg (150,000 lb)
Cruising speedMach 0.78 (829 km/h; 447 kn; 515 mph) [35]
Maximum speed Mach 0.82 (871 km/h; 470 kn; 541 mph)
Range (typical payload)3,100 nmi (5,740 km; 3,570 mi)
ACJ range4,200 nmi (7,780 km; 4,830 mi) [36]
Takeoff (MTOW, SL, ISA)1,780 m (5,840 ft) [36]
Landing (MLW, SL, ISA)1,230 m (4,040 ft) [36]
Fuel capacity 24,210 L (6,400 US gal)
Ceiling 39,100–41,000 ft (11,900–12,500 m) [31]
Engines (×2) CFM56-5B 68.3 in (1.73 m) fan
PW6000 56.5 in (1.44 m) fan
Thrust (×2)96–106 kN (22,000–24,000 lbf)

Engines

Aircraft ModelCertification DateEngines
A318-11123 May 2003 CFM International CFM56-5B8/P
A318-11223 May 2003 CFM International CFM56-5B9/P
A318-12121 December 2005 Pratt & Whitney PW6122A
A318-12221 December 2005 Pratt & Whitney PW6124A

See also

Related development

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

<span class="mw-page-title-main">Boeing 737</span> Single-aisle airliner family by Boeing

The Boeing 737 is a narrow-body aircraft produced by Boeing at its Renton factory in Washington. Developed to supplement the Boeing 727 on short and thin routes, the twinjet retained the 707 fuselage width and six abreast seating but with two underwing turbofans instead of four. Envisioned in 1964, the initial 737-100 made its first flight in April 1967 and entered service in February 1968 with Lufthansa. The lengthened 737-200 entered service in April 1968, and evolved through four generations, offering several variants for 85 to 215 passengers.

<span class="mw-page-title-main">Airbus A319</span> Airliner, shortened variant of the A320 family

The Airbus A319 is a member of the Airbus A320 family of short- to medium-range, narrow-body, commercial passenger twin-engine jet airliners manufactured by Airbus. The A319 carries 124 to 156 passengers and has a maximum range of 3,700 nmi. Final assembly of the aircraft takes place in Hamburg, Germany and Tianjin, China.

<span class="mw-page-title-main">Airbus A320 family</span> European airliner family

The Airbus A320 family is a series of narrow-body airliners developed and produced by Airbus. The A320 was launched in March 1984, first flew on 22 February 1987, and was introduced in April 1988 by Air France. The first member of the family was followed by the longer A321, the shorter A319, and the even shorter A318 . Final assembly takes place in Toulouse in France; Hamburg in Germany; Tianjin in China since 2009; and Mobile, Alabama in the United States since April 2016.

<span class="mw-page-title-main">Airbus A340</span> Type of aircraft

The Airbus A340 is a long-range, wide-body passenger airliner that was developed and produced by Airbus. In the mid-1970s, Airbus conceived several derivatives of the A300, its first airliner, and developed the A340 quadjet in parallel with the A330 twinjet. In June 1987, Airbus launched both designs with their first orders and the A340-300 took its maiden flight on 25 October 1991. It was certified along with the A340-200 on 22 December 1992 and both versions entered service in March 1993 with launch customers Lufthansa and Air France. The larger A340-500/600 were launched on 8 December 1997; the A340-600 flew for the first time on 23 April 2001 and entered service on 1 August 2002.

<span class="mw-page-title-main">Airbus A321</span> Airliner, stretched model of the A320 family

The Airbus A321 is a member of the Airbus A320 family of short to medium range, narrow-body, commercial passenger twin engine jet airliners; it carries 185 to 236 passengers. It has a stretched fuselage which was the first derivative of the baseline A320 and entered service in 1994, about six years after the original A320. The aircraft shares a common type rating with all other Airbus A320-family variants, allowing A320-family pilots to fly the aircraft without the need for further training.

<span class="mw-page-title-main">Airbus A330</span> Wide-body twin-engine jet airliner

The Airbus A330 is a wide-body aircraft developed and produced by Airbus. Airbus conceived several derivatives of the A300, its first airliner from the mid-1970s. Then the company began development on the A330 twinjet in parallel with the A340 quadjet and launched both designs with their first orders in June 1987. The A330-300, the first variant, took its maiden flight in November 1992 and entered service with Air Inter in January 1994. The slightly shorter A330-200 variant followed in 1998.

<span class="mw-page-title-main">CFM International CFM56</span> Turbofan aircraft engine

The CFM International CFM56 series is a Franco-American family of high-bypass turbofan aircraft engines made by CFM International (CFMI), with a thrust range of 18,500 to 34,000 lbf. CFMI is a 50–50 joint-owned company of Safran Aircraft Engines of France, and GE Aerospace (GE) of the United States. GE produces the high-pressure compressor, combustor, and high-pressure turbine, Safran manufactures the fan, gearbox, exhaust and the low-pressure turbine, and some components are made by Avio of Italy and Honeywell from the US. Both companies have their own final assembly line, GE in Evendale, Ohio, and Safran in Villaroche, France. The engine initially had extremely slow sales but has gone on to become the most used turbofan aircraft engine in the world.

<span class="mw-page-title-main">IAE V2500</span> High-bypass turbofan engine

The IAE V2500 is a two-shaft high-bypass turbofan engine built by International Aero Engines (IAE) which powers the Airbus A320 family, the McDonnell Douglas MD-90, and the Embraer C-390 Millennium.

<span class="mw-page-title-main">Airbus A350</span> Family of long-range, wide-body jet airliners

The Airbus A350 is a long-range, wide-body twin-engine airliner developed and produced by Airbus. The initial A350 design proposed by Airbus in 2004, in response to the Boeing 787 Dreamliner, would have been a development of the Airbus A330 with composite wings and new engines. Due to inadequate market support, Airbus switched in 2006 to a clean-sheet "XWB" design, powered by two Rolls-Royce Trent XWB high bypass turbofan engines. The prototype first flew on 14 June 2013 from Toulouse, France. Type certification from the European Aviation Safety Agency (EASA) was obtained in September 2014, followed by certification from the Federal Aviation Administration (FAA) two months later.

<span class="mw-page-title-main">Airbus A220</span> Narrow-body jet airliner family

The Airbus A220 is a family of five-abreast narrow-body airliners by Airbus Canada Limited Partnership (ACLP). It was originally developed by Bombardier and had two years in service as the Bombardier CSeries. The program was launched on 13 July 2008. The smaller A220-100 made its maiden flight on 16 September 2013, received an initial type certificate from Transport Canada on 18 December 2015, and entered service on 15 July 2016 with launch operator Swiss Global Air Lines. The longer A220-300 first flew on 27 February 2015, received an initial type certificate on 11 July 2016, and entered service with airBaltic on 14 December 2016.

<span class="mw-page-title-main">Embraer Lineage 1000</span> Business jet

The Embraer Lineage 1000 is a variant of the Embraer 190 regional jet airliner, launched as a private jet on May 2, 2006. Manufactured by the Brazilian aerospace firm Embraer until 2017, the Lineage was advertised as an "ultra-large" business jet with seating for up to 19 passengers.

TAP Maintenance & Engineering – the maintenance, repair and operations center of TAP Air Portugal airline – is located at Portela Airport, Lisbon, Portugal.

<span class="mw-page-title-main">Boeing 737 Classic</span> Single-aisle airliner family by Boeing

The Boeing 737 Classic is a series of narrow-body airliners produced by Boeing Commercial Airplanes, the second generation of the Boeing 737 series of aircraft. Development began in 1979 and the first variant, the 737-300, first flew in February 1984 and entered service that December. The stretched 737-400 first flew in February 1988 and entered service later that year. The shortest variant, the 737-500, first flew in June 1989 and entered service in 1990.

<span class="mw-page-title-main">Airbus Corporate Jets</span> Business unit of Airbus that sells corporate jet variants of parents airliner range

Airbus Corporate Jets (ACJ) is a business unit of Airbus which markets and completes business jet variants of the company’s airliners. Following the entry of the 737-based Boeing Business Jet into the market, Airbus introduced the A319-based Airbus Corporate Jet in 1997. Although the term Airbus Corporate Jet was initially used only for the A319CJ, it is now used for all models in a VIP configuration. As of June 2019, 213 corporate and private jets are operating; 222 aircraft have been ordered, including 128 A320 family jets.

<span class="mw-page-title-main">Boeing 737 Next Generation</span> Single-aisle airliner family by Boeing

The Boeing 737 Next Generation, commonly abbreviated as 737NG, or 737 Next Gen, is a twin-engine narrow-body aircraft produced by Boeing Commercial Airplanes. Launched in 1993 as the third generation derivative of the Boeing 737, it has been produced since 1997.

<span class="mw-page-title-main">Comac C919</span> Narrow-body twinjet airliner by Comac

The Comac C919 is a narrow-body airliner developed by Chinese aircraft manufacturer Comac. The development program was launched in 2008. Production began in December 2011, with the first prototype being rolled out on 2 November 2015; the maiden flight took place on 5 May 2017. On 29 September 2022 the C919 received its CAAC type certificate. The first production airframe was delivered to China Eastern Airlines on 9 December 2022 and was put into commercial passenger service on 28 May 2023.

<span class="mw-page-title-main">Airbus A321neo</span> 2010s narrow-body airliner by Airbus

The Airbus A321neo is a single-aisle airliner created by Airbus. The A321neo is developed from the Airbus A321 and Airbus A320neo family. It is the longest stretched fuselage of Airbus's A320 series, and the newest version of the A321, with the original A321ceo entering service in 1994 with Lufthansa. It typically seats 180 to 220 passengers in a two-class configuration, with up to 244 passengers in a high-density arrangement.

<span class="mw-page-title-main">Airbus A320neo family</span> Airliner family, series of improvements across the A320 family

The Airbus A320neo family is an incremental development of the A320 family of narrow-body airliners produced by Airbus. The A320neo family is based on the previous A319, A320, and A321, which was then retroactively renamed the A320ceo family.

<span class="mw-page-title-main">Airbus A330neo</span> Wide-body jet airliner developed from Airbus A330

The Airbus A330neo is a wide-body airliner developed by Airbus from the original Airbus A330. A new version with modern engines comparable with those developed for the Boeing 787 was called for by operators of the A330ceo. It was launched on 14 July 2014 at the Farnborough Airshow, promising 14% better fuel economy per seat. It is exclusively powered by the Rolls-Royce Trent 7000 which has double the bypass ratio of its predecessor.

<span class="mw-page-title-main">Boeing New Midsize Airplane</span> Proposed aircraft to fill the middle of the market segment

The New Midsize Airplane (NMA), or New Midsize Aircraft, is a concept airliner proposed by Boeing to fill the middle of the market segment.

References

Footnotes
  1. ↑ The Airbus A318 is built in Hamburg, Germany.
References
  1. 1 2 3 4 5 6 "Airbus aircraft Orders and Deliveries (updated monthly)". Airbus S.A.S. 30 November 2021. Retrieved 9 December 2021.
  2. 1 2 "A318 Dimensions & key data". Airbus. Archived from the original on 3 December 2016. Retrieved 11 October 2016.
  3. 1 2 3 "Steep approach". airbus.com. Archived from the original on 17 January 2013. Retrieved 1 April 2015.
  4. ↑ Norris & Wagner 1999 , p. 50
  5. 1 2 Condom, Pierre; Sutton, Oliver (1 June 1997). "New family members mean Airbus means business". Interavia Business & Technology. Archived from the original on 2 July 2016. Retrieved 15 July 2017.
  6. 1 2 Sparaco, Pierre (26 May 1997). "Airbus, Asians Plan Regional Twinjet". Aviation Week & Space Technology. 146 (22): 24–25.
  7. 1 2 Norris & Wagner 1999 , p. 87
  8. 1 2 Sparaco, Pierre (13 July 1998). "Europeans, Chinese Terminate AE31X". Aviation Week & Space Technology. 149 (2): 56–7.
  9. 1 2 3 Lewis, Paul (11 November 1997). "Time out in Asia". Flight International. Vol. 152, no. 4599. London, UK: Reed Business Information. pp. 38–40. Archived from the original on 22 June 2012. Retrieved 26 February 2011.
  10. ↑ Mecham, Michael (20 October 1997). "Market Tells Asia-Airbus Partners to Make Smaller Jet". Aviation Week & Space Technology: 63.
  11. ↑ Lewis, Paul (16 September 1997). "STAe thinks again on AE31X". Flight International . 152 (4591): 10. Archived from the original on 27 October 2017. Retrieved 12 July 2017.
  12. ↑ Moxon, Julian; Lewis, Paul (8 July 1998). "Airbus Industrie and AVIC abandon AE31X". Flightglobal. Archived from the original on 24 April 2017. Retrieved 23 April 2017.
  13. ↑ Eriksson, Soren (2015). The Global Commercial Aviation Industry. Routledge. p. 291. ISBN   978-1-136-67239-2.
  14. 1 2 "Airbus examines A319 shrink". Flightglobal.com. 4 March 1998. Archived from the original on 30 March 2019. Retrieved 30 March 2019.
  15. 1 2 Gunston 2009 , p. 222
  16. ↑ New Bizjets Archived 4 May 2008 at the Wayback Machine Ainonline
  17. ↑ "Boeing 737 Model Summary". boeing.com. 30 September 2017. Archived from the original on 21 November 2018. Retrieved 7 October 2017.
  18. 1 2 Ostrower, Jon (23 September 2010). "A318 to be available with sharklets from 2013". Flightglobal. Archived from the original on 25 September 2010. Retrieved 1 April 2015.
  19. ↑ "Airbus could eventually offer Neo version of A318: Leahy". Flightglobal . 1 December 2010. Archived from the original on 29 December 2018. Retrieved 21 May 2013.
  20. ↑ Kingsley-Jones, Max (15 June 1999). "Cut and Thrust". Flight International . 155 (4680): 150, 153–154. Archived from the original on 5 March 2016. Retrieved 3 January 2016.
  21. ↑ https://www.britishairways.com/en-us/information/about-ba/fleet-facts/airbus-318-100 Archived 15 December 2016 at the Wayback Machine Retrieved 29 June 2017.
  22. ↑ https://www.faa.gov/documentLibrary/media/Advisory_Circular/AC%2036-1H%20Chg%201.pdf Archived 4 May 2017 at the Wayback Machine Retrieved 7 May 2017.
  23. 1 2 3 4 Learmount, David (13 May 2006). "Airbus A318 makes first test arrival and departure at London City Airport". Flightglobal. Archived from the original on 17 September 2007. Retrieved 1 April 2015.
  24. ↑ Kaminski-Morrow, David (29 August 2009). "First British Airways A318 arrives at London Gatwick". Flightglobal. Archived from the original on 1 December 2017. Retrieved 2 May 2017.
  25. ↑ "Club World London City". britishairways.com. Archived from the original on 5 March 2016. Retrieved 2 March 2016.
  26. ↑ Orban, André (31 July 2020). "British Airways retires the A318 "BabyBus" operating the London City-New York JFK route". Aviation24.be. Retrieved 24 March 2022.
  27. ↑ "Final assembly lines – Airbus, Commercial Aircraft". airbus. Archived from the original on 22 February 2017.
  28. ↑ "A318 takes off on maiden flight" (Press release). Airbus. Archived from the original on 8 July 2011.
  29. ↑ Gunston 2009 , p. 223
  30. ↑ Nickeson, Blaine (6 September 2013). "North America & Frontier Says Goodbye to the Babybus – Airbus A318". AirlineReporter. Retrieved 27 March 2023.
  31. 1 2 "Type Certificate Data Sheet" (PDF). EASA. 28 June 2016. Archived from the original (PDF) on 15 September 2016.
  32. ↑ "Type Certificate Data Sheet" (PDF). FAA. 12 August 2016. Archived from the original (PDF) on 23 December 2016. Retrieved 11 October 2016.
  33. 1 2 3 4 "All About the Airbus A320 Family". Airbus. 2009. Archived from the original on 11 September 2016. Retrieved 11 October 2016.
  34. 1 2 "Airbus Aircraft Data File". Civil Jet Aircraft Design. Elsevier. July 1999. Archived from the original on 27 January 2017. Retrieved 11 October 2016.
  35. ↑ "A320 Family Technology". Airbus. Archived from the original on 3 April 2016. Retrieved 11 October 2016.
  36. 1 2 3 "ACJ318". Airbus. Archived from the original on 1 December 2016.
Bibliography
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.