The A300 has two underwing podded turbofans, making it the first twinjet wide-body airliner. Seen here operated by Iran Air in 2011, its largest remaining passenger operator as of 2024.
The Airbus A300 is Airbus' first production aircraft and the world's first twin-engine, double-aisle (wide-body) airliner. It was developed by Airbus Industrie GIE, now merged into Airbus SE, and manufactured from 1971 to 2007.
In September 1967, aircraft manufacturers in France, West Germany and the United Kingdom signed an initial memorandum of understanding to collaborate to develop an innovative large airliner. The French and West Germans reached a firm agreement on 29 May 1969, after the British withdrew from the project on 10 April 1969. A new collaborative aerospace company, Airbus Industrie GIE, was formally created on 18 December 1970 to develop and produce it. The A300 prototype first flew on 28 October 1972.
The first twin-engine widebody airliner, the A300 typically seats 247 passengers in two classes over a range of 5,375 to 7,500km (2,900 to 4,050nmi; 3,340 to 4,660mi). Initial variants are powered by General Electric CF6-50 or Pratt & Whitney JT9D turbofans and have a three-crew flight deck. The improved A300-600 has a two-crew cockpit and updated CF6-80C2 or PW4000 engines; it made its first flight on 8 July 1983 and entered service later that year. The A300 is the basis of the smaller A310 (first flown in 1982) and was adapted in a freighter version. Its cross section was retained for the larger four-engined A340 (1991) and the larger twin-engined A330 (1992). It is also the basis for the oversize Beluga transport (1994). Unlike most Airbus products, it has a yoke, not using a fly-by-wire system.
Launch customer Air France introduced the type on 23 May 1974. After limited demand initially, sales took off as the type was proven in early service, beginning three decades of steady orders. It has a similar capacity to the Boeing 767-300, introduced in 1986, but lacked the 767-300ER range. During the 1990s, the A300 became popular with cargo aircraft operators, as both passenger airliner conversions and as original builds. Production ceased in July 2007 after 561 deliveries. As of September2023[update], there are 197 A300 family aircraft still in commercial service.
During the 1960s, European aircraft manufacturers such as Hawker Siddeley and the British Aircraft Corporation, based in the UK, and Sud Aviation of France, had ambitions to build a new 200-seat airliner for the growing civil aviation market. While studies were performed and considered, such as a stretched twin-engine variant of the Hawker Siddeley Trident and an expanded development of the British Aircraft Corporation (BAC) One-Eleven, designated the BAC Two-Eleven, it was recognized that if each of the European manufacturers were to launch similar aircraft into the market at the same time, neither would achieve sales volume needed to make them viable.[2] In 1965, a British government study, known as the Plowden Report, had found British aircraft production costs to be between 10% and 20% higher than American counterparts due to shorter production runs, which was in part due to the fractured European market. To overcome this factor, the report recommended the pursuit of multinational collaborative projects between the region's leading aircraft manufacturers.[3]:49[4][5]:2–13
European manufacturers were keen to explore prospective programmes; the proposed 260-seat wide-bodyHBN 100 between Hawker Siddeley, Nord Aviation, and Breguet Aviation being one such example.[2][6]:37–38 National governments were also keen to support such efforts amid a belief that American manufacturers could dominate the European Economic Community;[7] in particular, Germany had ambitions for a multinational airliner project to invigorate its aircraft industry, which had declined considerably following the Second World War.[3]:49–50 During the mid-1960s, both Air France and American Airlines had expressed interest in a short-haul twin-engine wide-body aircraft, indicating a market demand for such an aircraft to be produced.[3][8] In July 1967, during a high-profile meeting between French, German, and British ministers, an agreement was made for greater cooperation between European nations in the field of aviation technology, and "for the joint development and production of an airbus".[2][9]:34 The word airbus at this point was a generic aviation term for a larger commercial aircraft, and was considered acceptable in multiple languages, including French.[9]:34
Technical director Roger Béteille (from behind) discussing with general manager Henri Ziegler beside the CF6 turbofan, which powered the A300 first flight
Shortly after the July 1967 meeting, French engineer Roger Béteille was appointed as the technical director of what would become the A300 programme, while Henri Ziegler, chief operating office of Sud Aviation, was appointed as the general manager of the organisation and German politician Franz Josef Strauss became the chairman of the supervisory board.[2] Béteille drew up an initial work share plan for the project, under which French firms would produce the aircraft's cockpit, the control systems, and lower-centre portion of the fuselage, Hawker Siddeley would manufacture the wings, while German companies would produce the forward, rear and upper part of the center fuselage sections. Additional work included moving elements of the wings being produced in the Netherlands, and Spain producing the horizontal tail plane.[2][6]:38
An early design goal for the A300 that Béteille had stressed the importance of was the incorporation of a high level of technology, which would serve as a decisive advantage over prospective competitors. For this reason, the A300 would feature the first use of composite materials of any passenger aircraft, the leading and trailing edges of the tail fin being composed of glass fibre reinforced plastic.[5]:2–16[10] Béteille opted for English as the working language for the developing aircraft, as well against using Metric instrumentation and measurements, as most airlines already had US-built aircraft.[10] These decisions were partially influenced by feedback from various airlines, such as Air France and Lufthansa, as an emphasis had been placed on determining the specifics of what kind of aircraft that potential operators were seeking. According to Airbus, this cultural approach to market research had been crucial to the company's long-term success.[10]
Workshare and redefinition
On 26 September 1967, the French, West German and British governments signed a Memorandum of Understanding to start the development of the 300-seat Airbus A300.[6]:38[11]:43[12]:57 At this point, the A300 was only the second major joint aircraft programme in Europe, the first being the Anglo-French Concorde.[9] Under the terms of the memorandum, the French and British were to each receive a 37.5 per cent work share on the project, while the West Germans would receive a 25 per cent share. Sud Aviation was recognized as the lead contractor for the A300, with Hawker Siddeley being selected as the British partner company.[2] At the time, the news of the announcement had been clouded by the British Government's support for the Airbus, which coincided with its refusal to back BAC's proposed competitor, the BAC 2–11, despite a preference for the latter expressed by British European Airways (BEA).[9]:34 Another parameter was the requirement for a new engine to be developed by Rolls-Royce to power the proposed airliner; a derivative of the in-development Rolls-Royce RB211, the triple-spool RB207, capable of producing of 47,500lbf (211kN).[13] The programme cost was US$4.6 billion (in 1993 dollars, equivalent to $8.76billion in 2023).[14]
The 5.64m (222in) diameter circular fuselage section for 8-abreast seating and 2 LD3 containers below. This is part of the first A300 prototype, F-OCAZ, on display at Deutsches Museum in Munich.
In December 1968, the French and British partner companies (Sud Aviation and Hawker Siddeley) proposed a revised configuration, the 250-seat Airbus A250. It had been feared that the original 300-seat proposal was too large for the market, thus it had been scaled down to produce the A250.[5]:2–14[8][15] The dimensional changes involved in the shrink reduced the length of the fuselage by 5.62 metres (18.4ft) and the diameter by 0.8 metres (31in), reducing the overall weight by 25 tonnes (55,000lb).[10][16]:16 For increased flexibility, the cabin floor was raised so that standard LD3 freight containers could be accommodated side-by-side, allowing more cargo to be carried. Refinements made by Hawker Siddeley to the wing's design provided for greater lift and overall performance; this gave the aircraft the ability to climb faster and attain a level cruising altitude sooner than any other passenger aircraft.[10] It was later renamed the A300B.[9]:34[15]
Perhaps the most significant change of the A300B was that it would not require new engines to be developed, being of a suitable size to be powered by Rolls-Royce's RB211, or alternatively the American Pratt & Whitney JT9D and General Electric CF6 powerplants; this switch was recognized as considerably reducing the project's development costs.[11]:45[15][16]:16–17 To attract potential customers in the US market, it was decided that General Electric CF6-50 engines would power the A300 in place of the British RB207; these engines would be produced in co-operation with French firm Snecma.[8][10] By this time, Rolls-Royce had been concentrating their efforts upon developing their RB211 turbofan engine instead and progress on the RB207's development had been slow for some time, the firm having suffered due to funding limitations, both of which had been factors in the engine switch decision.[5]:2–13[15][16]:17–18
On 10 April 1969, a few months after the decision to drop the RB207 had been announced, the British government announced that they would withdraw from the Airbus venture.[6]:38–39[15] In response, West Germany proposed to France that they would be willing to contribute up to 50% of the project's costs if France was prepared to do the same.[15] Additionally, the managing director of Hawker Siddeley, Sir Arnold Alexander Hall, decided that his company would remain in the project as a favoured sub-contractor, developing and manufacturing the wings for the A300, which would prove to be an important contributor to the performance of subsequent versions.[5]:2–13[9]:34[16]:18 Hawker Siddeley spent £35 million of its own funds, along with a further £35 million loan from the West German government, on the machine tooling to design and produce the wings.[6]:39[15]
Programme launch
An A300 in vintage Airbus livery, it was rolled out on 28 September 1972
On 29 May 1969, during the Paris Air Show, French transport minister Jean Chamant and German economics minister Karl Schiller signed an agreement officially launching the Airbus A300, the world's first twin-engine widebody airliner.[2] The intention of the project was to produce an aircraft that was smaller, lighter, and more economical than its three-engine American rivals, the McDonnell Douglas DC-10 and the Lockheed L-1011 TriStar.[10] In order to meet Air France's demands for an aircraft larger than 250-seat A300B, it was decided to stretch the fuselage to create a new variant, designated as the A300B2, which would be offered alongside the original 250-seat A300B, henceforth referred to as the A300B1. On 3 September 1970, Air France signed a letter of intent for six A300s, marking the first order to be won for the new airliner.[6]:39[10][16]:21
In the aftermath of the Paris Air Show agreement, it was decided that, in order to provide effective management of responsibilities, a Groupement d'intérêt économique would be established, allowing the various partners to work together on the project while remaining separate business entities.[2] On 18 December 1970, Airbus Industrie was formally established following an agreement between Aérospatiale (the newly merged Sud Aviation and Nord Aviation) of France and the antecedents to Deutsche Aerospace of Germany, each receiving a 50 per cent stake in the newly formed company.[3]:50[6]:39[10] In 1971, the consortium was joined by a third full partner, the Spanish firm CASA, who received a 4.2 per cent stake, the other two members reducing their stakes to 47.9 per cent each.[10][16]:20 In 1979, Britain joined the Airbus consortium via British Aerospace, which Hawker Siddeley had merged into, which acquired a 20 per cent stake in Airbus Industrie with France and Germany each reducing their stakes to 37.9 per cent.[3]:53[5]:2–14[6]:39
Prototype and flight testing
The 28 October 1972 maiden flight
Airbus Industrie was initially headquartered in Paris, which is where design, development, flight testing, sales, marketing, and customer support activities were centred; the headquarters was relocated to Toulouse in January 1974.[8][10] The final assembly line for the A300 was located adjacent to Toulouse Blagnac International Airport. The manufacturing process necessitated transporting each aircraft section being produced by the partner companies scattered across Europe to this one location. The combined use of ferries and roads were used for the assembly of the first A300, however this was time-consuming and not viewed as ideal by Felix Kracht, Airbus Industrie's production director.[10] Kracht's solution was to have the various A300 sections brought to Toulouse by a fleet of Boeing 377-derived Aero Spacelines Super Guppy aircraft, by which means none of the manufacturing sites were more than two hours away. Having the sections airlifted in this manner made the A300 the first airliner to use just-in-time manufacturing techniques, and allowed each company to manufacture its sections as fully equipped, ready-to-fly assemblies.[3]:53[10]
In September 1969, construction of the first prototype A300 began.[16]:20 On 28 September 1972, this first prototype was unveiled to the public, it conducted its maiden flight from Toulouse–Blagnac International Airport on 28 October that year.[6]:39[9]:34[11]:51–52 This maiden flight, which was performed a month ahead of schedule, lasted for one hour and 25 minutes; the captain was Max Fischl and the first officer was Bernard Ziegler, son of Henri Ziegler.[10] In 1972, unit cost was US$17.5M.[17] On 5 February 1973, the second prototype performed its maiden flight.[6]:39 The flight test programme, which involved a total of four aircraft, was relatively problem-free, accumulating 1,580 flight hours throughout.[16]:22 In September 1973, as part of promotional efforts for the A300, the new aircraft was taken on a six-week tour around North America and South America, to demonstrate it to airline executives, pilots, and would-be customers.[10] Amongst the consequences of this expedition, it had allegedly brought the A300 to the attention of Frank Borman, the CEO of Eastern Airlines, one of the "big four" U.S. airlines.[18]
Entry into service
On 15 March 1974, type certificates were granted for the A300 from both German and French authorities, clearing the way for its entry into revenue service.[18] On 23 May 1974, Federal Aviation Administration (FAA) certification was received.[16]:22 The first production model, the A300B2, entered service in 1974, followed by the A300B4 one year later.[8] Initially, the success of the consortium was poor, in part due to the economic consequences of the 1973 oil crisis,[6]:40[8][9]:34 but by 1979 there were 81 A300 passenger liners in service with 14 airlines, alongside 133 firm orders and 88 options.[18] Ten years after the official launch of the A300, the company had achieved a 26 per cent market share in terms of dollar value, enabling Airbus to proceed with the development of its second aircraft, the Airbus A310.[18]
The Airbus A300 is a wide-body medium-to-long range airliner; it has the distinction of being the first twin-engine wide-body aircraft in the world.[8][9]:34[12]:57,60[19] In 1977, the A300 became the first Extended Range Twin Operations (ETOPS)-compliant aircraft, due to its high performance and safety standards.[6]:40 Another world-first of the A300 is the use of composite materials on a commercial aircraft, which were used on both secondary and later primary airframe structures, decreasing overall weight and improving cost-effectiveness.[19] Other firsts included the pioneering use of centre-of-gravity control, achieved by transferring fuel between various locations across the aircraft, and electrically signalled secondary flight controls.[20]
The A300 is powered by a pair of underwing turbofan engines, either General Electric CF6 or Pratt & Whitney JT9D engines; the sole use of underwing engine pods allowed for any suitable turbofan engine to be more readily used.[12]:57 The lack of a third tail-mounted engine, as per the trijet configuration used by some competing airliners, allowed for the wings to be located further forwards and to reduce the size of the vertical stabiliser and elevator, which had the effect of increasing the aircraft's flight performance and fuel efficiency.[3]:50[16]:21
The initial A300 flight deck with analog flight instruments and a flight engineer station (not shown)
Airbus partners had employed the latest technology, some of which having been derived from Concorde, on the A300. According to Airbus, new technologies adopted for the airliner were selected principally for increased safety, operational capability, and profitability.[19] Upon entry into service in 1974, the A300 was a very advanced plane, which went on to influence later airliner designs. The technological highlights include advanced wings by de Havilland (later BAE Systems) with supercritical airfoil sections for economical performance and advanced aerodynamically efficient flight control surfaces. The 5.64m (222in) diameter circular fuselage section allows an eight-abreast passenger seating and is wide enough for 2 LD3 cargo containers side by side. Structures are made from metal billets, reducing weight. It is the first airliner to be fitted with wind shear protection. Its advanced autopilots are capable of flying the aircraft from climb-out to landing, and it has an electrically controlled braking system.
Later A300s incorporated other advanced features such as the Forward-Facing Crew Cockpit (FFCC), which enabled a two-pilot flight crew to fly the aircraft alone without the need for a flight engineer, the functions of which were automated; this two-man cockpit concept was a world-first for a wide-body aircraft.[8][16]:23–24[20]Glass cockpit flight instrumentation, which used cathode-ray tube (CRT) monitors to display flight, navigation, and warning information, along with fully digital dual autopilots and digital flight control computers for controlling the spoilers, flaps, and leading-edge slats, were also adopted upon later-built models.[19][21] Additional composites were also made use of, such as carbon-fibre-reinforced polymer (CFRP), as well as their presence in an increasing proportion of the aircraft's components, including the spoilers, rudder, air brakes, and landing gear doors.[22] Another feature of later aircraft was the addition of wingtip fences, which improved aerodynamic performance and thus reduced cruise fuel consumption by about 1.5% for the A300-600.[23]
In addition to passenger duties, the A300 became widely used by air freight operators; according to Airbus, it is the best-selling freight aircraft of all time.[20] Various variants of the A300 were built to meet customer demands, often for diverse roles such as aerial refueling tankers, freighter models (new-build and conversions), combi aircraft, military airlifter, and VIP transport. Perhaps the most visually unique of the variants is the A300-600ST Beluga, an oversized cargo-carrying model operated by Airbus to carry aircraft sections between their manufacturing facilities.[20] The A300 was the basis for, and retained a high level of commonality with, the second airliner produced by Airbus, the smaller Airbus A310.[19]
On 23 May 1974, the first A300 to enter service performed the first commercial flight of the type, flying from Paris to London, for Air France.[6]:39[18]
Immediately after the launch, sales of the A300 were weak for some years, with most orders going to airlines that had an obligation to favor the domestically made product– notably Air France and Lufthansa, the first two airlines to place orders for the type.[3]:50–52[18] Following the appointment of Bernard Lathière as Henri Ziegler's replacement, an aggressive sales approach was adopted. Indian Airlines was the world's first domestic airline to purchase the A300, ordering three aircraft with three options. However, between December 1975 and May 1977, there were no sales for the type. During this period a number of "whitetail" A300s– completed but unsold aircraft– were completed and stored at Toulouse, and production fell to half an aircraft per month amid calls to pause production completely.[18]
Korean Air, the first non-European customer in September 1974
During the flight testing of the A300B2, Airbus held a series of talks with Korean Air on the topic of developing a longer-range version of the A300, which would become the A300B4. In September 1974, Korean Air placed an order for four A300B4s with options for two further aircraft; this sale was viewed as significant as it was the first non-European international airline to order Airbus aircraft. Airbus had viewed South-East Asia as a vital market that was ready to be opened up and believed Korean Air to be the 'key'.[8][16]:23[18]
Airlines operating the A300 on short-haul routes were forced to reduce frequencies to try and fill the aircraft. As a result, they lost passengers to airlines operating more frequent narrow-body flights. Eventually, Airbus had to build its own narrowbody aircraft (the A320) to compete with the Boeing 737 and McDonnell Douglas DC-9/MD-80. The saviour of the A300 was the advent of ETOPS, a revised FAA rule which allows twin-engine jets to fly long-distance routes that were previously off-limits to them. This enabled Airbus to develop the aircraft as a medium/long-range airliner.
In 1977, US carrier Eastern Air Lines leased four A300s as an in-service trial.[18] CEO Frank Borman was impressed that the A300 consumed 30% less fuel, even less than expected, than Eastern's fleet of L-1011s. The A300 would replacing the aging DC-9s and 727-100s but in smaller numbers, while being a twinjet sized between the Tristars and 727-200s, and capable of operating from short runway airports with sufficient range from New York City to Miami.[24] Borman proceeded to order 23 A300s, becoming the first U.S. customer for the type. This order is often cited as the point at which Airbus came to be seen as a serious competitor to the large American aircraft-manufacturers Boeing and McDonnell Douglas.[6]:40[8][18] Aviation author John Bowen alleged that various concessions, such as loan guarantees from European governments and compensation payments, were a factor in the decision as well. Although the A300 was originally too large for Eastern's exiting routes, Airbus provided a fixed subsidy for a 57% load factor which decreased for every percent above that figure.[3]:52 The Eastern Air Lines breakthrough was shortly followed by an order from Pan Am. From then on, the A300 family sold well, eventually reaching a total of 561 delivered aircraft.[1]
Garuda Indonesia Airbus A300B4-220 with the newly designed Forward Facing Crew Cockpit or FFCC Concept that operated only by two-man cockpit crew and was the first wide-body aircraft to be operated by two-man cockpit crew.
In 1977, the A300B4 became the first ETOPS compliant aircraft,[25] qualifying for Extended Twin Engine Operations over water, providing operators with more versatility in routing. In 1982, Garuda Indonesian Airways became the first airline to fly the A300B4-200FFCC with the newly Forward-Facing Crew Cockpit concept, the world's first wide-body aircraft that only operated by two-man cockpit crew.[26] By 1981, Airbus was growing rapidly, with over 400 aircraft sold to over forty airlines.[27]
In 1989, Chinese operator China Eastern Airlines received its first A300; by 2006, the airline operated around 18 A300s, making it the largest operator of both the A300 and the A310 at that time. On 31 May 2014, China Eastern officially retired the last A300-600 in its fleet, having begun drawing down the type in 2010.[28]
On 12 July 2007, the last A300, a freighter, was delivered to FedEx Express, as of May 2022 the largest operator with 65 aircraft still in service
By the 1990s, the A300 was being heavily promoted as a cargo freighter.[16]:24 The largest freight operator of the A300 is FedEx Express, which has 65 A300 aircraft in service as of May 2022.[citation needed]UPS Airlines also operates 52 freighter versions of the A300.[citation needed]
The final version was the A300-600R and is rated for 180-minute ETOPS. The A300 has enjoyed renewed interest in the secondhand market for conversion to freighters; large numbers were being converted during the late 1990s.[16]:24–25 The freighter versions– either new-build A300-600s or converted ex-passenger A300-600s, A300B2s and B4s– account for most of the world's freighter fleet after the Boeing 747 freighter.[31]
The A300 provided Airbus the experience of manufacturing and selling airliners competitively. The basic fuselage of the A300 was later stretched (A330 and A340), shortened (A310), or modified into derivatives (A300-600ST Beluga Super Transporter). In 2006, unit cost of an −600F was $105 million.[14] In March 2006, Airbus announced the impending closure of the A300/A310 final assembly line,[32] making them the first Airbus aircraft to be discontinued. The final production A300, an A300F freighter, performed its initial flight on 18 April 2007,[33] and was delivered to FedEx Express on 12 July 2007.[34] Airbus has announced a support package to keep A300s flying commercially. Airbus offers the A330-200F freighter as a replacement for the A300 cargo variants.[35]
The life of UPS's fleet of 52 A300s, delivered from 2000 to 2006, will be extended to 2035 by a flight deck upgrade based around Honeywell Primus Epic avionics; new displays and flight management system (FMS), improved weather radar, a central maintenance system, and a new version of the current enhanced ground proximity warning system. With a light usage of only two to three cycles per day, it will not reach the maximum number of cycles by then. The first modification will be made at Airbus Toulouse in 2019 and certified in 2020.[36] As of July 2017, there are 211 A300s in service with 22 operators, with the largest operator being FedEx Express with 68 A300-600F aircraft.[37]
Variants
A300B1
The two A300B1 prototypes were 51m (167ft) long
The A300B1 was the first variant to take flight. It had a maximum takeoff weight (MTOW) of 132t (291,000lb), was 51m (167ft) long and was powered by two General Electric CF6-50A engines.[16]:21[38]:41 Only two prototypes of the variant were built before it was adapted into the A300B2, the first production variant of the airliner.[6]:39 The second prototype was leased to Trans European Airways in 1974.[38]:54
A300B2
The A300B2 was 53.6m (176ft) long, 2.6m (8.5ft) longer than the A300B1
A300B2-100
Responding to a need for more seats from Air France, Airbus decided that the first production variant should be larger than the original prototype A300B1. The CF6-50A powered A300B2-100 was 2.6m (8.5ft) longer than the A300B1 and had an increased MTOW of 137t (302,000lb), allowing for 30 additional seats and bringing the typical passenger count up to 281, with capacity for 20 LD3 containers.[39]:10[40][38]:17 Two prototypes were built and the variant made its maiden flight on 28 June 1973, became certified on 15 March 1974 and entered service with Air France on 23 May 1974.[38]:27,53[39]:10
A300B2-200
For the A300B2-200, originally designated as the A300B2K, Krueger flaps were introduced at the leading-edge root, the slat angles were reduced from 20 degrees to 16 degrees, and other lift related changes were made in order to introduce a high-lift system. This was done to improve performance when operating at high-altitude airports, where the air is less dense and lift generation is reduced.[41]:52,53[42] The variant had an increased MTOW of 142t (313,000lb) and was powered by CF6-50C engines, was certified on 23 June 1976, and entered service with South African Airways in November 1976.[38]:40[39]:12 CF6-50C1 and CF6-50C2 models were also later fitted depending on customer requirements, these became certified on 22 February 1978 and 21 February 1980 respectively.[38]:41[39]:12
A300B2-320
The A300B2-320 introduced the Pratt & Whitney JT9D powerplant and was powered by JT9D-59A engines. It retained the 142t (313,000lb) MTOW of the B2-200, was certified on 4 January 1980, and entered service with Scandinavian Airlines on 18 February 1980, with only four being produced.[38]:99,112[39]:14
A Production figures are listed up to 1 January 1999.[38]:110
A300B4
The A300B4-100 first took flight on 26 December 1974, kept the B2 length but featured a higher fuel capacity
A300B4-100
The initial A300B4 variant, later named the A300B4-100, included a centre fuel tank for an increased fuel capacity of 47.5 tonnes (105,000lb), and had an increased MTOW of 157.5 tonnes (347,000lb).[43][41]:38 It also featured Krueger flaps and had a similar high-lift system to what was later fitted to the A300B2-200.[41]:74 The variant made its maiden flight on 26 December 1974, was certified on 26 March 1975, and entered service with Germanair in May 1975.[38]:32,54[39]:16
A300B4-200
The A300B4-200 had an increased MTOW of 165 tonnes (364,000lb) and featured an additional optional fuel tank in the rear cargo hold, which would reduce the cargo capacity by two LD3 containers.[39]:19[41]:69 The variant was certified on 26 April 1979.[39]:19
A Production figures are listed up to 1 January 1999.[38]:110
A300B4-200FFCC
It is the A300B4-200 without the flight engineer but analog flight instruments. Introduced by Garuda Indonesian Airways in 1982
A300-600
With small wingtip fences, the A300-600 entered service in June 1984 with Saudi Arabian AirlinesThe A300-600 shared the EFIS two-crew cockpit with the A310 (pictured below)
The A300-600, officially designated as the A300B4-600, was slightly longer than the A300B2 and A300B4 variants and had an increased interior space from using a similar rear fuselage to the Airbus A310, this allowed it to have two additional rows of seats.[41]:79 It was initially powered by Pratt & Whitney JT9D-7R4H1 engines, but was later fitted with General Electric CF6-80C2 engines, with Pratt & Whitney PW4156 or PW4158 engines being introduced in 1986.[41]:82 Other changes include an improved wing featuring a recambered trailing edge, the incorporation of simpler single-slotted Fowler flaps, the deletion of slat fences, and the removal of the outboard ailerons after they were deemed unnecessary on the A310.[44] The variant made its first flight on 8 July 1983, was certified on 9 March 1984, and entered service in June 1984 with Saudi Arabian Airlines.[39]:42[38]:58 A total of 313 A300-600s (all versions) have been sold. The A300-600 uses the A310 cockpits, featuring digital technology and electronic displays, eliminating the need for a flight engineer. The FAA issues a single type rating which allows operation of both the A310 and A300-600.
A300-600: (Official designation: A300B4-600) The baseline model of the −600 series.
A300-620C: (Official designation: A300C4-620) A convertible-freighter version. Four delivered between 1984 and 1985.
A300-600F: (Official designation: A300F4-600) The freighter version of the baseline −600.
A300-600R: (Official designation: A300B4-600R) The increased-range −600, achieved by an additional trim fuel tank in the tail. First delivery in 1988 to American Airlines; all A300s built since 1989 (freighters included) are −600Rs. Japan Air System (later merged into Japan Airlines) took delivery of the last new-built passenger A300, an A300-622R, in November 2002.
A300-600RC: (Official designation: A300C4-600R) The convertible-freighter version of the −600R. Two were delivered in 1999.
A300-600RF: (Official designation: A300F4-600R) The freighter version of the −600R. All A300s delivered between November 2002 and 12 July 2007 (last ever A300 delivery) were A300-600RFs.
A300B10 (A310)
The longer-range Airbus A310, 7m (23ft) shorter, was introduced by Swissair in April 1983
Airbus had demand for an aircraft smaller than the A300. On 7 July 1978, the A310 (initially the A300B10) was launched with orders from Swissair and Lufthansa. On 3 April 1982, the first prototype conducted its maiden flight and it received its type certification on 11 March 1983.
Keeping the same eight-abreast cross-section, the A310 is 6.95m (22.8ft) shorter than the initial A300 variants, and has a smaller 219m2 (2,360sqft) wing, down from 260m2 (2,800sqft). The A310 introduced a two-crew glass cockpit, later adopted for the A300-600 with a common type rating. It was powered by the same GE CF6-80 or Pratt & Whitney JT9D then PW4000 turbofans. It can seat 220 passengers in two classes, or 240 in all-economy, and can fly up to 5,150nmi (9,540km; 5,930mi). It has overwing exits between the two main front and rear door pairs.
In April 1983, the aircraft entered revenue service with Swissair and competed with the Boeing 767–200, introduced six months before. Its longer range and ETOPS regulations allowed it to be operated on transatlantic flights. Until the last delivery in June 1998, 255 aircraft were produced, as it was succeeded by the larger Airbus A330-200. It has cargo aircraft versions, and was derived into the Airbus A310 MRTT military tanker/transport.
A300-600ST
The Airbus Beluga is based on the A300 with an oversized cargo hold on top
Commonly referred to as the Airbus Beluga or "Airbus Super Transporter", these five airframes are used by Airbus to ferry parts between the company's disparate manufacturing facilities, thus enabling workshare distribution. They replaced the four Aero Spacelines Super Guppys previously used by Airbus.
As of June 2021, the A300 has been involved in 77 occurrences including 24 hull-loss accidents causing 1133 fatalities, and 36 criminal occurrences and hijackings causing 302 fatalities.[46]
Accidents with fatalities
American Airlines Flight 587 vertical stabilizer Nose and forward section of UPS 1354 which crashed in August 2013
21 September 1987: An Egyptair Airbus A300B4-203 touched down 700m (2,300ft) past the runway threshold during a training flight. The right main gear hit the runway lights and the aircraft collided with an antenna and fences. No passengers were on board the plane, but 5 crew members were killed. The aircraft was written off. This was the first fatal accident of an Airbus A300.[47]
28 September 1992: PIA Flight 268, an A300B4 crashed on approach near Kathmandu, Nepal. All 12 crew and 155 passengers died.[48]
26 April 1994: China Airlines Flight 140 crashed at the end of runway at Nagoya, Japan, killing all 15 crew and 249 of 256 passengers on board.
16 February 1998: China Airlines Flight 676 crashed into a residential area close to CKS International Airport near Taipei, Taiwan. All 196 people on board were killed, including Taiwan's central bank president. Six people on the ground were also killed.
12 November 2001: American Airlines Flight 587 crashed into Belle Harbor—a neighbourhood in Queens, New York, United States—shortly after takeoff from John F. Kennedy International Airport. The vertical stabiliser ripped off the aircraft after the rudder was mishandled during wake turbulence. All 260 people on board were killed, along with 5 people on the ground. It is the second-deadliest incident involving an A300 to date and the second-deadliest aircraft incident in the United States.
14 April 2010: AeroUnion Flight 302, an A300B4-203F, crashed on a road 2km (1.2mi) short of the runway while attempting to land at Monterrey Airport in Mexico. Seven people (five crew members and two on the ground) were killed.[51]
18 December 1983: Malaysian Airline System Flight 684, an Airbus A300B4 leased from Scandinavian Airlines System (SAS), registration OY-KAA, crashed short of the runway at Kuala Lumpur in bad weather while attempting to land on a flight from Singapore. All 247 people aboard escaped unharmed but the aircraft was destroyed in the resulting fire.[53]
24 April 1993: an Air Inter Airbus A300B2-1C was written off after colliding with a light pole while being pushed back at Montpellier.[54]
15 November 1993, an Indian Airlines Airbus A300, registered as VT-EDV, crash landed near Hyderabad Airport. There were no deaths but the aircraft was written off.[55]
10 August 1994 – Korean Air Flight 2033 (Airbus A300) from Seoul to Jeju, the flight approached faster than usual to avoid potential windshear. Fifty feet above the runway the co-pilot, who was not flying the aircraft, decided that there was insufficient runway left to land and tried to perform a go-around against the captain's wishes. The aircraft touched down 1,773 meters beyond the runway threshold. The aircraft could not be stopped on the remaining 1,227 meters of runway and overran at a speed of 104 knots. After striking the airport wall and a guard post at 30 knots, the aircraft burst into flames and was incinerated. The cabin crew was credited with safely evacuating all passengers although only half of the aircraft's emergency exits were usable.
17 October 2001: Pakistan International Airlines flight PK231, registration AP-BCJ, from Islamabad via Peshawar to Dubai veered off the side of the runway after the right hand main landing gear collapsed as it touched down. The aircraft skidded and eventually came to rest in sand 50 meters from the runway. The aircraft sustained damage to its right wing structure and its no. 2 engine, which partly broke off the wing. All 205 passengers and crew survived.[56]
1 March 2004: Pakistan International Airlines Flight 2002 burst 2 tyres whilst taking off from King Abdulaziz International Airport. Fragments of the tyre were ingested by the engines, this caused the engines to catch fire and an aborted takeoff was performed. Due to the fire substantial damage to the engine and the left wing caused the aircraft to be written off. All 261 passengers and 12 crew survived.[57]
16 November 2012: an Air Contractors Airbus A300B4-203(F) EI-EAC, operating flight QY6321 on behalf of EAT Leipzig from Leipzig (Germany) to Bratislava (Slovakia), suffered a nose wheel collapse during roll out after landing at Bratislava's M. R. Štefánik Airport. All three crew members survived unharmed, the aircraft was written off. As of December 2017, the aircraft still was parked at a remote area of the airport between runways 13 and 22.[58]
12 October 2015: An Airbus A300B4-200F Freighter operated by Egyptian Tristar cargo carrier crashed in Mogadishu, Somalia. All the passengers and crew members survived the crash.[59]
1 October 2016: An Airbus A300-B4 registration PR-STN on a cargo flight between São Paulo-Guarulhos and Recife suffered a runway excursion after landing and the aft gear collapsed upon touchdown.
Violent incidents
27 June 1976: Air France Flight 139, originating in Tel Aviv, Israel and carrying 248 passengers and a crew of 12 took off from Athens, Greece, headed for Paris, France. The flight was hijacked by terrorists, and was eventually flown to Entebbe Airport in Uganda. At the airport, Israeli commandos rescued 102 of the 106 hostages.
26 October 1986: Thai Airways Flight 620, an Airbus A300B4-601, originating in Bangkok suffered an explosion mid-flight. The aircraft descended rapidly and was able to land safely at Osaka. The aircraft was later repaired and there were no fatalities. The cause was a hand grenade brought onto the plane by a Japanese gangster of the Yamaguchi-gumi. 62 of the 247 people on board were injured.[60][61][62][63][64][65][excessive citations]
24 December 1994: Air France Flight 8969 was hijacked at Houari Boumedienne Airport in Algiers, by four terrorists who belonged to the Armed Islamic Group. The terrorists apparently intended to crash the plane over the Eiffel Tower on Boxing Day. After a failed attempt to leave Marseille following a confrontational firefight between the terrorists and the GIGN French Special Forces, the result was the death of all four terrorists. (Snipers on the terminal front's roof shot dead two of the terrorists. The other two terrorists died as a result of gunshots in the cabin after approximately 20 minutes.) Three hostages including a Vietnamese diplomat were executed in Algiers, 229 hostages survived, many of them wounded by shrapnel. The almost 15-year-old aircraft was written off.
24 December 1999: Indian Airlines Flight IC 814 from Kathmandu, Nepal, to New Delhi was hijacked. After refuelling and offloading a few passengers, the flight was diverted to Kandahar, Afghanistan. A Nepalese man was murdered while the plane was in flight.[68]
22 November 2003: European Air Transport OO-DLL, operating on behalf of DHL Aviation, was hit by an SA-14 'Gremlin' missile after takeoff from Baghdad International Airport. The aeroplane lost hydraulic pressure and thus the controls. After extending the landing gear to create more drag, the crew piloted the plane using differences in engine thrust and landed the plane with minimal further damage. The plane was repaired and offered for sale, but in April 2011 it still remained parked at Baghdad Intl.[69]
ex TC-ACD and TC-ACE Air ACT, preserved as coffee house at Uçak Cafe in Burhaniye, Turkey.
ex TC-MNJ MNG Airlines, preserved as Köfte Airlines restaurant at Tekirdağ, Turkey.
ex TC-FLA Fly Air, preserved as the Airbus Cafe & Restaurant at Kayseri, Turkey.
ex TC-ACC Air ACT, preserved as the Uçak Kütüphane library and education centre at Çankırı, Turkey.
ex EP-MHA Mahan Air, preserved as instructional airframe at the Botia Mahan Aviation College at Kerman, Iran.
ex TC-FLM Fly Air, preserved as a restaurant at Istanbul, Turkey.
ex B-18585 China Airlines, preserved as the Flight of Happiness restaurant at Taoyuan, Taiwan.
ex-PK-JID Sempati Air Airbus A300B4 repainted in first A300B1 prototype colours, including original F-WUAB registration, became an exhibit in 2014 at the Aeroscopia museum in Blagnac, near Toulouse, France.[72]
ex TC-MCE MNG Airlines, preserved as a restaurant at the Danialand theme park at Agadir, Morocco.
↑ In full cargo service and limited passenger service
Related Research Articles
The Boeing 767 is an American wide-body airliner developed and manufactured by Boeing Commercial Airplanes. The aircraft was launched as the 7X7 program on July 14, 1978, the prototype first flew on September 26, 1981, and it was certified on July 30, 1982. The initial 767-200 variant entered service on September 8, 1982, with United Airlines, and the extended-range 767-200ER in 1984. It was stretched into the 767-300 in October 1986, followed by the extended-range 767-300ER in 1988, the most popular variant. The 767-300F, a production freighter version, debuted in October 1995. It was stretched again into the 767-400ER from September 2000.
American Airlines Flight 587 was a regularly scheduled international passenger flight from John F. Kennedy International Airport, New York City, to Las Américas International Airport, Santo Domingo. On November 12, 2001, the Airbus A300B4-605R flying the route crashed into the neighborhood of Belle Harbor on the Rockaway Peninsula of Queens, New York City, shortly after takeoff, killing all 260 people aboard, as well as five people on the ground. It is the second-deadliest aviation accident in U.S. history, behind the crash of American Airlines Flight 191 in 1979, and the second-deadliest aviation incident involving an Airbus A300, after Iran Air Flight 655.
The Airbus A310 is a wide-body aircraft, designed and manufactured by Airbus Industrie GIE, then a consortium of European aerospace manufacturers. Airbus had identified a demand for an aircraft smaller than the A300, the first twin-jet wide-body. On 7 July 1978, the A310 was launched with orders from Swissair and Lufthansa. On 3 April 1982, the first prototype conducted its maiden flight, and the A310 received its type certificate on 11 March 1983.
The Airbus A340 is a long-range, wide-body passenger airliner that was developed and produced by Airbus. In the mid-1970s, Airbus conceived several derivatives of the A300, its first airliner, and developed the A340 quadjet in parallel with the A330 twinjet. In June 1987, Airbus launched both designs with their first orders and the A340-300 took its maiden flight on 25 October 1991. It was certified along with the A340-200 on 22 December 1992 and both versions entered service in March 1993 with launch customers Lufthansa and Air France. The larger A340-500/600 were launched on 8 December 1997; the A340-600 flew for the first time on 23 April 2001 and entered service on 1 August 2002.
The Airbus A330 is a wide-body aircraft developed and produced by Airbus. Airbus began developing larger A300 derivatives in the mid-1970s, giving rise to the A330 twinjet as well as the Airbus A340 quadjet, and launched both designs along with their first orders in June 1987. The A330-300, the first variant, took its maiden flight in November 1992 and entered service with Air Inter in January 1994. The A330-200, a shortened longer-range variant, followed in 1998 with Canada 3000 as the launch operator.
A wide-body aircraft, also known as a twin-aisle aircraft and in the largest cases as a jumbo jet, is an airliner with a fuselage wide enough to accommodate two passenger aisles with seven or more seats abreast. The typical fuselage diameter is 5 to 6 m. In the typical wide-body economy cabin, passengers are seated seven to ten abreast, allowing a total capacity of 200 to 850 passengers. Seven-abreast aircraft typically seat 160 to 260 passengers, eight-abreast 250 to 380, nine- and ten-abreast 350 to 480. The largest wide-body aircraft are over 6 m (20 ft) wide, and can accommodate up to eleven passengers abreast in high-density configurations.
A jet airliner or jetliner is an airliner powered by jet engines. Airliners usually have two or four jet engines; three-engined designs were popular in the 1970s but are less common today. Airliners are commonly classified as either the large wide-body aircraft, medium narrow-body aircraft and smaller regional jet.
Tunisair is the national airline of Tunisia. Formed in 1948, it operates scheduled international services to four continents. Its main base is Tunis–Carthage International Airport. The airline's head office is in Tunis, near Tunis Airport.
This is a list of aviation-related events from 2000.
The General Electric CF6, US military designations F103 and F138, is a family of high-bypass turbofan engines produced by GE Aviation. Based on the TF39, the first high-power high-bypass jet engine, the CF6 powers a wide variety of civilian airliners. The basic engine core also powers the LM2500 and LM6000 marine and power generation turboshafts. It is gradually being replaced by the newer GEnx family.
China Airlines Flight 676 was a scheduled international passenger flight. On Monday, 16 February 1998, the Airbus A300 jet airliner operating the flight crashed into a road and residential area in Tayuan, Taoyuan County, near Chiang Kai-shek International Airport, Taiwan.
Trans Mediterranean Airways SAL, styled as TMA Cargo, was a cargo airline based in Beirut, Lebanon. The airline restarted operations in 2010, following a six-year hiatus. It suspended operations once again in September 2014.
Air Afrique was a Pan-African airline, that was mainly owned by many West African countries for most of its history. It was established as the official transnational carrier for francophone West and Central Africa, because many of these countries did not have the capability to create and maintain a national airline, and had its headquarters in Abidjan, Ivory Coast. The carrier was a member of the International Air Transport Association (IATA) as well as the French Union's smaller IATA-like ATAF.
China Airlines Flight 140 was a regularly scheduled passenger flight from Chiang Kai-shek International Airport to Nagoya Airport in Nagoya, Japan.
A trijet is a jet aircraft powered by three jet engines. In general, passenger airline trijets are considered to be second-generation jet airliners, due to their innovative engine locations, in addition to the advancement of turbofan technology. Trijets are more efficient than quadjets, but not as efficient as twinjets, which replaced trijets as larger and more reliable turbofan engines became available.
On 22 November 2003, shortly after takeoff from Baghdad, Iraq, an Airbus A300B2-200F cargo plane, registered OO-DLL and owned by the Belgian division of European Air Transport, was struck on the left wing by a surface-to-air missile while on a scheduled flight to Muharraq, Bahrain. Severe wing damage resulted in a fire and complete loss of hydraulic flight control systems. Because outboard left wing fuel tank 1A was full at takeoff, no fuel-air vapour explosion occurred. Liquid jet fuel dropped away as 1A disintegrated. Inboard fuel tank 1 was pierced and leaking.
Garuda Indonesia Flight 152 (GA152/GIA152) was a scheduled domestic flight operated by Garuda Indonesia from Soekarno–Hatta International Airport, Tangerang, to Polonia International Airport, Medan, in Indonesia. On 26 September 1997, the aircraft flying the route crashed into mountainous woodlands near the village of Buah Nabar, Sibolangit, killing all 222 passengers and 12 crew members on board. It is the deadliest aviation disaster in Indonesia's history.
Air Siam was an airline based in Thailand which operated from 1965 until 1976.
Air Transat Flight 961 was an Air Transat flight from Varadero, Cuba to Quebec City, Canada on March 6, 2005. The aircraft experienced a structural failure in which the rudder detached in flight. The flight crew were able to regain enough control of the aircraft to return safely to Varadero. As of March 2020, the Airbus A310-308 is no longer in service.
Malaysian Airline System Flight 684 (MH684/MAS684) was a scheduled international passenger flight of Malaysian Airline System from Singapore Changi Airport in Singapore to Subang International Airport, in Subang, Malaysia. On 18 December 1983, the Airbus A300B4-120 operating the flight crashed 2 km short of the runway while landing at Subang International Airport. There were no fatalities among the 247 occupants.
1 2 3 4 5 6 7 8 9 10 Bowen, John T. The Economic Geography of Air Transportation: Space, Time, and the Freedom of the Sky. "Business & Economics", 2010. ISBN1-135-15657-3, pp. 49–53.
↑ Chorafas, Dimitris N. The Business of Europe is Politics: Business Opportunity, Economic Nationalism and the Decaying Atlantic Alliance. Gower Publishing, 2012. ISBN1-4094-5959-4 p. 292.
1 2 3 Endres, Günter (Spring 2004). "Classic Airliner: Airbus A300". Flightpath: The International Journal of Commercial Aviation. 3. Norwalk, Connecticut: AIRtime Publishing: 43, 45, 51–52. ISBN1-880588-73-0.
1 2 3 Pitt, Ivan L. and John Randolph Norsworthy. Economics of the U.S. Commercial Airline Industry: Productivity, Technology and Deregulation. "Springer", 2012. ISBN1-4615-5031-9, pp. 57, 60.
↑ Beysens, Daniel A. and Jack J.W. A. van Loon. Generation and Applications of Extra-Terrestrial Environments on Earth. "River Publishers", 2015. ISBN87-93237-53-7. pp. 63–65.
↑ "Flight MH684 crash", AirDisasters, 18 December 1983, archived from the original on 28 April 2013, retrieved 8 March 2013{{citation}}: CS1 maint: unfit URL (link)
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
