Arthropod leg

Last updated

The arthropod leg is a form of jointed appendage of arthropods, usually used for walking. Many of the terms used for arthropod leg segments (called podomeres) are of Latin origin, and may be confused with terms for bones: coxa (meaning hip, pl.: coxae), trochanter, femur (pl.: femora), tibia (pl.: tibiae), tarsus (pl.: tarsi), ischium (pl.: ischia), metatarsus, carpus, dactylus (meaning finger), patella (pl.: patellae).

Contents

Homologies of leg segments between groups are difficult to prove and are the source of much argument. Some authors posit up to eleven segments per leg for the most recent common ancestor of extant arthropods [1] but modern arthropods have eight or fewer. It has been argued [2] [3] that the ancestral leg need not have been so complex, and that other events, such as successive loss of function of a Hox-gene, could result in parallel gains of leg segments.

In arthropods, each of the leg segments articulates with the next segment in a hinge joint and may only bend in one plane. This means that a greater number of segments is required to achieve the same kinds of movements that are possible in vertebrate animals, which have rotational ball-and-socket joints at the base of the fore and hind limbs. [4]

Biramous and uniramous

20200213 arthropod uniramous arthropodized appendage morphology en.png
Uniramous
20211214 arthropod biramous arthropodized appendage morphology en.png
Biramous
Generalized external morphology of uniramous and biramous appendages

The appendages of arthropods may be either biramous or uniramous. A uniramous limb comprises a single series of segments attached end-to-end. A biramous limb, however, branches into two, and each branch consists of a series of segments attached end-to-end.

The external branch (ramus) of the appendages of crustaceans is known as the exopod or exopodite, while the internal branch is known as the endopod or endopodite. Other structures aside from the latter two are termed exites (outer structures) and endites (inner structures). Exopodites can be easily distinguished from exites by the possession of internal musculature. The exopodites can sometimes be missing in some crustacean groups (amphipods and isopods), and they are completely absent in insects. [5]

The legs of insects and myriapods are uniramous. In crustaceans, the first antennae are uniramous, but the second antennae are biramous, as are the legs in most species.

For a time, possession of uniramous limbs was believed to be a shared, derived character, so uniramous arthropods were grouped into a taxon called Uniramia. It is now believed that several groups of arthropods evolved uniramous limbs independently from ancestors with biramous limbs, so this taxon is no longer used.

Chelicerata

Diagram of a spider leg and pedipalp - the pedipalp has one fewer segment Spider external anatomy appendages en.png
Diagram of a spider leg and pedipalp – the pedipalp has one fewer segment

Arachnid legs differ from those of insects by the addition of two segments on either side of the tibia, the patella between the femur and the tibia, and the metatarsus (sometimes called basitarsus) between the tibia and the tarsus (sometimes called telotarsus), making a total of seven segments.

The tarsus of spiders has claws at the end as well as a hook that helps with web-spinning. Spider legs can also serve sensory functions, with hairs that serve as touch receptors, as well as an organ on the tarsus that serves as a humidity receptor, known as the tarsal organ. [6]

The situation is identical in scorpions, but with the addition of a pre-tarsus beyond the tarsus. The claws of the scorpion are not truly legs, but are pedipalps, a different kind of appendage that is also found in spiders and is specialised for predation and mating.

In Limulus , there are no metatarsi or pretarsi, leaving six segments per leg.

Crustacea

The leg of a squat lobster, showing the segments; the ischium and merus are fused in many decapods Crustaceanleg.jpg
The leg of a squat lobster, showing the segments; the ischium and merus are fused in many decapods

The legs of crustaceans are divided primitively into seven segments, which do not follow the naming system used in the other groups. They are: coxa, basis, ischium, merus, carpus, propodus, and dactylus. In some groups, some of the limb segments may be fused together. The claw (chela) of a lobster or crab is formed by the articulation of the dactylus against an outgrowth of the propodus. Crustacean limbs also differ in being biramous, whereas all other extant arthropods have uniramous limbs.

Myriapoda

Seven-segmented legs of Scutigera coleoptrata Scutigera coleoptrata 205306445.jpg
Seven-segmented legs of Scutigera coleoptrata

Myriapods (millipedes, centipedes and their relatives) have seven-segmented walking legs, comprising coxa, trochanter, prefemur, femur, tibia, tarsus, and a tarsal claw. Myriapod legs show a variety of modifications in different groups. In all centipedes, the first pair of legs is modified into a pair of venomous fangs called forcipules. In most millipedes, one or two pairs of walking legs in adult males are modified into sperm-transferring structures called gonopods. In some millipedes, the first leg pair in males may be reduced to tiny hooks or stubs, while in others the first pair may be enlarged.

Insects

Zabalius aridus showing full leg anatomy, including plantulae under each tarsomere Tettigoniidae Zabalius aridus True Leaf Katydid 2012 06 04 6713.JPG
Zabalius aridus showing full leg anatomy, including plantulae under each tarsomere

Insects and their relatives are hexapods, having six legs, connected to the thorax, each with five components. In order from the body they are the coxa, trochanter, femur, tibia, and tarsus. Each is a single segment, except the tarsus which can be from three to seven segments, each referred to as a tarsomere.

Except in species in which legs have been lost or become vestigial through evolutionary adaptation, adult insects have six legs, one pair attached to each of the three segments of the thorax. They have paired appendages on some other segments, in particular, mouthparts, antennae and cerci, all of which are derived from paired legs on each segment of some common ancestor.

Some larval insects do however have extra walking legs on their abdominal segments; these extra legs are called prolegs. They are found most frequently on the larvae of moths and sawflies. Prolegs do not have the same structure as modern adult insect legs, and there has been a great deal of debate as to whether they are homologous with them. [7] Current evidence suggests that they are indeed homologous up to a very primitive stage in their embryological development, [8] but that their emergence in modern insects was not homologous between the Lepidoptera and Symphyta. [9] Such concepts are pervasive in current interpretations of phylogeny. [10]

In general, the legs of larval insects, particularly in the Endopterygota, vary more than in the adults. As mentioned, some have prolegs as well as "true" thoracic legs. Some have no externally visible legs at all (though they have internal rudiments that emerge as adult legs at the final ecdysis). Examples include the maggots of flies or grubs of weevils. In contrast, the larvae of other Coleoptera, such as the Scarabaeidae and Dytiscidae have thoracic legs, but no prolegs. Some insects that exhibit hypermetamorphosis begin their metamorphosis as planidia, specialised, active, legged larvae, but they end their larval stage as legless maggots, for example the Acroceridae.

Among the Exopterygota, the legs of larvae tend to resemble those of the adults in general, except in adaptations to their respective modes of life. For example, the legs of most immature Ephemeroptera are adapted to scuttling beneath underwater stones and the like, whereas the adults have more gracile legs that are less of a burden during flight. Again, the young of the Coccoidea are called "crawlers" and they crawl around looking for a good place to feed, where they settle down and stay for life. Their later instars have no functional legs in most species. Among the Apterygota, the legs of immature specimens are in effect smaller versions of the adult legs.[ citation needed ]

Fundamental morphology of insect legs

Diagram of a typical insect leg InsectLeg.svg
Diagram of a typical insect leg

A representative insect leg, such as that of a housefly or cockroach, has the following parts, in sequence from most proximal to most distal:

Associated with the leg itself there are various sclerites around its base. Their functions are articular and have to do with how the leg attaches to the main exoskeleton of the insect. Such sclerites differ considerably between unrelated insects. [7]

Coxa

The coxa is the proximal segment and functional base of the leg. It articulates with the pleuron and associated sclerites of its thoracic segment, and in some species it articulates with the edge of the sternite as well. The homologies of the various basal sclerites are open to debate. Some authorities suggest that they derive from an ancestral subcoxa. In many species, the coxa has two lobes where it articulates with the pleuron. The posterior lobe is the meron which is usually the larger part of the coxa. A meron is well developed in Periplaneta, the Isoptera, Neuroptera and Lepidoptera.

Trochanter

The trochanter articulates with the coxa but usually is attached rigidly to the femur. In some insects, its appearance may be confusing; for example it has two subsegments in the Odonata. In parasitic Hymenoptera, the base of the femur has the appearance of a second trochanter.

Femur

Acanthacris ruficornis, legs saltatorial, femora with bipennate muscle attachments, spines on tibiae painfully effective in a defensive kick Acanthacris ruficornis Acrididae IMG 2127s.jpg
Acanthacris ruficornis, legs saltatorial, femora with bipennate muscle attachments, spines on tibiae painfully effective in a defensive kick

In most insects, the femur is the largest region of the leg; it is especially conspicuous in many insects with saltatorial legs because the typical leaping mechanism is to straighten the joint between the femur and the tibia, and the femur contains the necessary massive bipennate musculature.

Tibia

The tibia is the fourth section of the typical insect leg. As a rule, the tibia of an insect is slender in comparison to the femur, but it generally is at least as long and often longer. Near the distal end, there is generally a tibial spur, often two or more. In the Apocrita, the tibia of the foreleg bears a large apical spur that fits over a semicircular gap in the first segment of the tarsus. The gap is lined with comb-like bristles, and the insect cleans its antennae by drawing them through.

Tarsus

Robber fly (Asilidae), showing tarsomeres and pretarsi with ungues, pulvilli and empodia Pegesimallus sp robberfly.jpg
Robber fly (Asilidae), showing tarsomeres and pretarsi with ungues, pulvilli and empodia

The ancestral tarsus was a single segment and in the extant Protura, Diplura and certain insect larvae the tarsus also is single-segmented. Most modern insects have tarsi divided into subsegments (tarsomeres), usually about five. The actual number varies with the taxon, which may be useful for diagnostic purposes. For example, the Pterogeniidae characteristically have 5-segmented fore- and mid-tarsi, but 4-segmented hind tarsi, whereas the Cerylonidae have four tarsomeres on each tarsus.

The distal segment of the typical insect leg is the pretarsus. In the Collembola, Protura and many insect larvae, the pretarsus is a single claw. On the pretarsus most insects have a pair of claws (ungues, singular unguis). Between the ungues, a median unguitractor plate supports the pretarsus. The plate is attached to the apodeme of the flexor muscle of the ungues. In the Neoptera, the parempodia are a symmetrical pair of structures arising from the outside (distal) surface of the unguitractor plate between the claws. [11] It is present in many Hemiptera and almost all Heteroptera. [11] Usually, the parempodia are bristly (setiform), but in a few species they are fleshy. [12] Sometimes the parempodia are reduced in size so as to almost disappear. [13] Above the unguitractor plate, the pretarsus expands forward into a median lobe, the arolium.

Webspinner, Embia major, front leg showing enlarged tarsomere, which contains the silk-spinning organs Embia major female front leg showing enlarged tarsomere.jpg
Webspinner, Embia major , front leg showing enlarged tarsomere, which contains the silk-spinning organs

Webspinners (Embioptera) have an enlarged basal tarsomere on each of the front legs, containing the silk-producing glands. [14]

Under their pretarsi, members of the Diptera generally have paired lobes or pulvilli, meaning "little cushions". There is a single pulvillus below each unguis. The pulvilli often have an arolium between them or otherwise a median bristle or empodium, meaning the meeting place of the pulvilli. On the underside of the tarsal segments, there frequently are pulvillus-like organs or plantulae. The arolium, plantulae and pulvilli are adhesive organs enabling their possessors to climb smooth or steep surfaces. They all are outgrowths of the exoskeleton and their cavities contain blood. Their structures are covered with tubular tenent hairs, the apices of which are moistened by a glandular secretion. The organs are adapted to apply the hairs closely to a smooth surface so that adhesion occurs through surface molecular forces. [7] [15]

Insects control the ungues through muscle tension on a long tendon, the "retractor unguis" or "long tendon". In insect models of locomotion and motor control, such as Drosophila (Diptera), locusts (Acrididae), or stick insects (Phasmatodea), the long tendon courses through the tarsus and tibia before reaching the femur. Tension on the long tendon is controlled by two muscles, one in the femur and one in the tibia, which can operate differently depending on how the leg is bent. Tension on the long tendon controls the claw, but also bends the tarsus and likely affects its stiffness during walking. [16]

Variations in functional anatomy of insect legs

Bruchine with powerful femora used for escape from hard-shelled seed Starr 020615-0037 Erythrina sandwicensis.jpg
Bruchine with powerful femora used for escape from hard-shelled seed

The typical thoracic leg of an adult insect is adapted for running (cursorial), rather than for digging, leaping, swimming, predation, or other similar activities. The legs of most cockroaches are good examples. However, there are many specialized adaptations, including:

Expression of Hox genes in the body segments of different groups of arthropod, as traced by evolutionary developmental biology. The Hox genes 7, 8, and 9 correspond in these groups but are shifted (by heterochrony) by up to three segments. Segments with maxillopeds have Hox gene 7. Fossil trilobites probably had three body regions, each with a unique combination of Hox genes. Arthropod segment Hox gene expression.svg
Expression of Hox genes in the body segments of different groups of arthropod, as traced by evolutionary developmental biology. The Hox genes 7, 8, and 9 correspond in these groups but are shifted (by heterochrony) by up to three segments. Segments with maxillopeds have Hox gene 7. Fossil trilobites probably had three body regions, each with a unique combination of Hox genes.

Evolution and homology of arthropod legs

The embryonic body segments (somites) of different arthropods taxa have diverged from a simple body plan with many similar appendages which are serially homologous, into a variety of body plans with fewer segments equipped with specialised appendages. [17] The homologies between these have been discovered by comparing genes in evolutionary developmental biology. [18]

Somite
(body
segment)
Trilobite
(Trilobitomorpha)
202003 Trilobite.svg
Spider
(Chelicerata)
202201 Common house spider.svg
Centipede
(Myriapoda)
Scolopendra subspinipes japonica (no background).png
Insect
(Hexapoda)
202101 Chrysodeixis eriosoma.svg
Shrimp
(Crustacea)
202112 Japanese tiger prawn.svg
1antennae chelicerae (jaws and fangs)antennaeantennae1st antennae
21st legs pedipalps --2nd antennae
32nd legs1st legs mandibles mandiblesmandibles (jaws)
43rd legs2nd legs1st maxillae 1st maxillae1st maxillae
54th legs3rd legs2nd maxillae2nd maxillae2nd maxillae
65th legs4th legscollum (no legs)1st legs1st legs
76th legs-1st legs2nd legs2nd legs
87th legs-2nd legs3rd legs3rd legs
98th legs-3rd legs-4th legs
109th legs-4th legs-5th legs

See also

Related Research Articles

<span class="mw-page-title-main">Antenna (biology)</span> Paired appendages used for sensing in arthropods

Antennae, sometimes referred to as "feelers", are paired appendages used for sensing in arthropods.

<span class="mw-page-title-main">Pedipalp</span> Appendage of chelicerate

Pedipalps are the secondary pair of forward appendages among chelicerates – a group of arthropods including spiders, scorpions, horseshoe crabs, and sea spiders. The pedipalps are lateral to the chelicerae ("jaws") and anterior to the first pair of walking legs.

<span class="mw-page-title-main">Malacostraca</span> Largest class of crustaceans

Malacostraca is the second largest of the six classes of pancrustaceans behind insects, containing about 40,000 living species, divided among 16 orders. Its members, the malacostracans, display a great diversity of body forms and include crabs, lobsters, crayfish, shrimp, krill, prawns, woodlice, amphipods, mantis shrimp, tongue-eating lice and many other less familiar animals. They are abundant in all marine environments and have colonised freshwater and terrestrial habitats. They are segmented animals, united by a common body plan comprising 20 body segments, and divided into a head, thorax, and abdomen.

<span class="mw-page-title-main">Proleg</span> Anatomical structure

A proleg is a small, fleshy, stub structure found on the ventral surface of the abdomen of most larval forms of insects of the order Lepidoptera, though they can also be found on larvae of insects such as sawflies. In all the orders in which they appear, mainly Hymenoptera and Lepidoptera, prolegs of any form evolved independently of each other by convergent evolution. They appear to have evolved from ancient inactive genes that have since been activated again.

<span class="mw-page-title-main">Appendage</span> External body part or natural prolongation, that protrudes from an organisms body

An appendage is an external body part, or natural prolongation, that protrudes from an organism's body such as an arm or a leg. Protrusions from single-celled bacteria and archaea are known as cell-surface appendages or surface appendages. In many kinds of eukaryotic cell the protrusions are known as membrane protrusions or cell appendages, such as microvilli, and cilia.

<i>Canadaspis</i> Extinct genus of arthropods

Canadaspis is an extinct genus of bivalved Cambrian arthropod, known from North America and China. They are thought to have been benthic feeders that moved mainly by walking and possibly used its biramous appendages to stir mud in search of food. They have been placed within the Hymenocarina, which includes other bivalved Cambrian arthropods.

<span class="mw-page-title-main">Glossary of entomology terms</span>

This glossary of entomology describes terms used in the formal study of insect species by entomologists.

<span class="mw-page-title-main">Spider anatomy</span> Physiology of Spiders (order Araneae)

The anatomy of spiders includes many characteristics shared with other arachnids. These characteristics include bodies divided into two tagmata, eight jointed legs, no wings or antennae, the presence of chelicerae and pedipalps, simple eyes, and an exoskeleton, which is periodically shed.

<i>Waptia</i> Cambrian arthropod

Waptia is an extinct genus of arthropod from the Middle Cambrian of North America. It grew to a length of 6.65 cm (3 in), and had a large bivalved carapace and a segmented body terminating into a pair of tail flaps. It was an active swimmer and likely a predator of soft-bodied prey. It is also one of the oldest animals with direct evidence of brood care. Waptia fieldensis is the only species classified under the genus Waptia, and is known from the Burgess Shale Lagerstätte of British Columbia, Canada. Specimens of Waptia are also known from the Spence Shale of Utah, United States.

<span class="mw-page-title-main">Arthropod head problem</span> Dispute concerning the evolution of arthropods

The (pan)arthropod head problem is a long-standing zoological dispute concerning the segmental composition of the heads of the various arthropod groups, and how they are evolutionarily related to each other. While the dispute has historically centered on the exact make-up of the insect head, it has been widened to include other living arthropods, such as chelicerates, myriapods, and crustaceans, as well as fossil forms, such as the many arthropods known from exceptionally preserved Cambrian faunas. While the topic has classically been based on insect embryology, in recent years a great deal of developmental molecular data has become available. Dozens of more or less distinct solutions to the problem, dating back to at least 1897, have been published, including several in the 2000s.

<span class="mw-page-title-main">Opiliones anatomy</span>

Opiliones are an order of arachnids and share many common characteristics with other arachnids. However, several differences separate harvestmen from other arachnid orders such as spiders. The bodies of opiliones are divided into two tagmata : the abdomen (opisthosoma) and the cephalothorax (prosoma). Unlike spiders, the juncture between the abdomen and cephalothorax is often poorly defined. Harvestmen have chelicerae, pedipalps and four pairs of legs. Harvestmen were traditionally thought to have two eyes, except in the case of eyeless species. Developmental genetic work has shown that living species retain up to six eyes, including one pair of rudimentary median eyes and one pair of rudimentary lateral eyes.

<span class="mw-page-title-main">Arthropod</span> Phylum of invertebrates with jointed exoskeletons

Arthropods are invertebrates in the phylum Arthropoda. They possess an exoskeleton with a cuticle made of chitin, often mineralised with calcium carbonate, a body with differentiated (metameric) segments, and paired jointed appendages. In order to keep growing, they must go through stages of moulting, a process by which they shed their exoskeleton to reveal a new one. They form an extremely diverse group of up to ten million species.

<span class="mw-page-title-main">Insect morphology</span> Description of the physical form of insects

Insect morphology is the study and description of the physical form of insects. The terminology used to describe insects is similar to that used for other arthropods due to their shared evolutionary history. Three physical features separate insects from other arthropods: they have a body divided into three regions, three pairs of legs, and mouthparts located outside of the head capsule. This position of the mouthparts divides them from their closest relatives, the non-insect hexapods, which include Protura, Diplura, and Collembola.

<span class="mw-page-title-main">Bradoriida</span> Extinct order of arthropods

Bradoriida, also called bradoriids, are an extinct order of small marine arthropods with a bivalved carapace, which globally distributed, forming a significant portion of the Cambrian and Early Ordovician soft-bodied communities.

This glossary describes the terms used in formal descriptions of spiders; where applicable these terms are used in describing other arachnids.

<span class="mw-page-title-main">Crustacean</span> Subphylum of arthropods

Crustaceans are invertebrate animals that constitute one group of arthropods that are a part of the subphylum Crustacea, a large, diverse group of mainly aquatic arthropods including decapods, seed shrimp, branchiopods, fish lice, krill, remipedes, isopods, barnacles, copepods, opossum shrimps, amphipods and mantis shrimp. The crustacean group can be treated as a subphylum under the clade Mandibulata. It is now well accepted that the hexapods emerged deep in the Crustacean group, with the completed pan-group referred to as Pancrustacea. The three classes Cephalocarida, Branchiopoda and Remipedia are more closely related to the hexapods than they are to any of the other crustaceans.

<i>Necrogammarus</i> Extinct genus of arthropods

Necrogammarus salweyi is the binomial name applied to an arthropod fossil discovered in Herefordshire, England. The fossil represents a fragmentary section of the underside and an appendage of a pterygotid eurypterid, a group of large and predatory aquatic arthropods that lived from the late Silurian to the late Devonian. The Necrogammarus fossil is Late Silurian in age and its generic name means "dead lobster", deriving from Ancient Greek νεκρός and Latin gammarus ("lobster").

<i>Retifacies</i> Extinct genus of arthropod

Retifacies abnormalis is an extinct arthropod that lived in the lower Cambrian. Its fossil remains have been found in the Maotianshan Shales of Yunnan, China. It is a member of the Artiopoda, and closely related to Pygmaclypeatus.

<i>Erratus</i> Extinct genus of Cambrian arthropod

Erratus is an extinct genus of marine arthropod from the Cambrian of China. Its type and only species is Erratus sperare. Erratus is likely one of the most basal known arthropods, and its discovery has helped scientists understand the early evolution of arthropod trunk appendages. Some of the stem-arthropods like radiodonts did not have legs, instead they had flap like appendages that helped them swim. Erratus on the other hand had not only flaps but also a set of primitive legs. It also supported the theory that the gills of aquatic arthropods probably evolved into the wings and lungs of terrestrial arthropods later in the Paleozoic.

<i>Surusicaris</i> Extinct genus of bivalved arthropod

Surusicaris is an extinct genus of bivalved arthropod, known from the Cambrian Burgess Shale of British Columbia, Canada. It is considered to be closely related to Isoxys, and like it has spined grasping frontal appendages.

References

  1. Kukalova-Peck, J. (1992). "The "Uniramia" do not exist - the ground plan of the Pterygota as revealed by Permian Diaphanopterodea from Russia (Insecta, Paleodictyopteroidea)". Canadian Journal of Zoology. 70 (2): 236–255. doi:10.1139/z92-037.
  2. Fryer, G. (1996). "Reflections on arthropod evolution". Biol. J. Linn. Soc. 58 (1): 1–55. doi: 10.1111/j.1095-8312.1996.tb01659.x .
  3. Schram, F. R. & S. Koenemann (2001). "Developmental genetics and arthropod evolution: part I, on legs". Evolution & Development. 3 (5): 343–354. doi:10.1046/j.1525-142X.2001.01038.x. PMID   11710766. S2CID   25997101.
  4. Pat Willmer; Graham Stone; Ian Johnston (12 March 2009). Environmental Physiology of Animals. John Wiley & Sons. p. 329. ISBN   978-1-4443-0922-5.
  5. Geoff A. Boxshall & Damià Jaume (2009). "Exopodites, Epipodites and Gills in Crustaceans" (PDF). Arthropod Systematics & Phylogeny. 67 (2). Museum für Tierkunde Dresden: 229–254. doi: 10.3897/asp.67.e31699 . Archived (PDF) from the original on 2019-04-26. Retrieved 2012-01-14.
  6. Pechmann, Matthias (November 2010). "Patterning mechanisms and morphological diversity of spider appendages and their importance for spider evolution". Arthropod Structure & Development. 39 (6): 453–467. doi:10.1016/j.asd.2010.07.007. PMID   20696272 . Retrieved 20 August 2020.
  7. 1 2 3 4 Richards, O. W.; Davies, R.G. (1977). Imms' General Textbook of Entomology: Volume 1: Structure, Physiology and Development Volume 2: Classification and Biology. Berlin: Springer. ISBN   0-412-61390-5.
  8. Panganiban, Grace; Nagy, Lisa; Carroll, Sean B. (1994). "The role of the Distal-less gene in the development and evolution of insect limbs". Current Biology. 4 (8): 671–675. doi:10.1016/S0960-9822(00)00151-2. PMID   7953552. S2CID   22980014.
  9. Suzuki, Y; Palopoli, MF (Oct 2001). "Evolution of insect abdominal appendages: are prolegs homologous or convergent traits?". Dev Genes Evol. 211 (10): 486–92. doi:10.1007/s00427-001-0182-3. PMID   11702198. S2CID   1163446.
  10. Galis, Frietson (1996). "The evolution of insects and vertebrates: homeobox genes and homology". Trends in Ecology & Evolution. 11 (10): 402–403. doi:10.1016/0169-5347(96)30038-4. PMID   21237897.
  11. 1 2 Friedemann, Katrin; Spangenberg, Rico; Yoshizawa, Kazunor; Beutel, Rolf G. (2013). "Evolution of attachment structures in the highly diverse Acercaria (Hexapoda)" (PDF). Cladistics. 30 (2): 170–201. doi:10.1111/cla.12030. PMID   34781597. S2CID   86195785. Archived from the original (PDF) on 25 January 2014. Retrieved 25 January 2014.
  12. Schuh, Randall T. & Slater, James Alexander (1995). True Bugs of the World (Hemiptera:Heteroptera): Classification and Natural History. Ithaca, New York: Cornell University Press. p.  46. ISBN   978-0-8014-2066-5.
  13. Goel, S. C. (1972). "Notes on the structure of the unguitractor plate in Heteroptera (Hemiptera)". Journal of Entomology Series A, General Entomology. 46 (2): 167–173. doi:10.1111/j.1365-3032.1972.tb00124.x.
  14. Ross, Edward S. (1991). "Embioptera". In Naumann, I. D.; Carne, P. B.; et al. (eds.). The Insects of Australia. Volume 1 (2 ed.). Melbourne University Press. pp. 405–409.
  15. Stanislav N Gorb. "Biological attachment devices: exploring nature's diversity for biomimetics Phil. Trans. R. Soc. A 2008; 366(1870): 1557-1574 doi:10.1098/rsta.2007.2172 1471-2962
  16. RADNIKOW, G.; BÄSSLER, U. (1991-05-01). "Function of a Muscle Whose Apodeme Travels Through a Joint Moved by Other Muscles: Why the Retractor Unguis Muscle in Stick Insects is Tripartite and has no Antagonist". Journal of Experimental Biology. 157 (1): 87–99. doi:10.1242/jeb.157.1.87. ISSN   0022-0949.
  17. Novartis Foundation; Hall, Brian (2008). Homology. John Wiley. p. 29. ISBN   978-0-470-51566-2.
  18. Brusca, R.C.; Brusca, G.J. (1990). Invertebrates . Sinauer Associates. p.  669.