Baring Bridge

Last updated

Baring Bridge
Baring Bridge NRHP 100004331 King County, WA.jpg
Baring Bridge
USA Washington location map.svg
Red pog.svg
Washington
Location South fork of the Skykomish River
Coordinates 47°45′56″N121°28′47″W / 47.765472°N 121.479786°W / 47.765472; -121.479786
Built1930
Built byHenry McBride
NRHP reference No. 100004331
Added to NRHPAugust 26, 2019

Baring Bridge is a one-lane wood and steel cable suspension bridge crossing the South Fork Skykomish River in Baring, Washington, United States. It carries Index Creek Road, which connects a rural area to U.S. Route 2 in unincorporated King County. Built in 1930, it is one of only two wooden suspension bridges designed for vehicle use in Washington that remain active and was added to the National Register of Historic Places in August 2019. [1]

Contents

Description

Construction of the Baring Bridge was completed in 1930, replacing an older bridge of similar design built around 1912–1913. The main suspension span of the bridge is 10.5 feet (3.2 m) wide and 272 feet (83 m) long, with two wooden approach ramps that bring the total length to 334 feet (102 m). Two pairs of main cables are anchored by large concrete blocks in the ground. The secondary suspension cables are attached to floor beams with eyebolt and ring connections. The north and south towers were rebuilt in 1958. [1] In 1975, the weight restriction was set to 3 tons, later raised to 10 tons in 1995 after major repairs were made. [2]

History

In the late nineteenth century, the area around the Skykomish River had many mining claims and rock quarries. [1] The Baring Bridge provides the only access to people residing on the south side of the river in the community of Baring. [3] The first Baring Bridge, designed by J.G. McCormack, was built in 1912, then closed to vehicles by 1921. This bridge was replaced by the 1930 bridge, which shared a similar design.

A heavy snowstorm in 1952 caused the bridge deck to collapse, pulling the cables out of their anchorage. Repairs included new concrete anchorages and a superstructure of untreated timber. [1]

In 1990, the Skykomish River suffered a 100-year flood, causing moderate damage to the Baring Bridge. [4] Major repairs in 1994–1995 replaced the decking, enlarged concrete anchors, and replaced steel rods with high-strength cable. [2] More repairs to the bridge were made in 2000, [2] 2007, [3] and 2017. [2]

In 2019, the Baring Bridge Replacement Project was established to plan for a replacement bridge. [5] Construction is scheduled to begin in 2026 with work taking approximately two years to complete. [6] The Baring Bridge is one of only two remaining wooden suspension bridges for vehicles in the state, alongside the Longmire Bridge which crosses the Nisqually River in Mount Rainier National Park, which contains no original timbers since it was rebuilt in 2005. [1]

Related Research Articles

<span class="mw-page-title-main">Suspension bridge</span> Type of bridge

A suspension bridge is a type of bridge in which the deck is hung below suspension cables on vertical suspenders. The first modern examples of this type of bridge were built in the early 1800s. Simple suspension bridges, which lack vertical suspenders, have a long history in many mountainous parts of the world.

<span class="mw-page-title-main">Cable-stayed bridge</span> Type of bridge with cables directly from towers to deck

A cable-stayed bridge has one or more towers, from which cables support the bridge deck. A distinctive feature are the cables or stays, which run directly from the tower to the deck, normally forming a fan-like pattern or a series of parallel lines. This is in contrast to the modern suspension bridge, where the cables supporting the deck are suspended vertically from the main cable, anchored at both ends of the bridge and running between the towers. The cable-stayed bridge is optimal for spans longer than cantilever bridges and shorter than suspension bridges. This is the range within which cantilever bridges would rapidly grow heavier, and suspension bridge cabling would be more costly.

<span class="mw-page-title-main">George Washington Bridge</span> Suspension bridge between New Jersey and New York

The George Washington Bridge is a double-decked suspension bridge spanning the Hudson River, connecting Fort Lee in Bergen County, New Jersey, with the Washington Heights neighborhood of Manhattan, New York City. It is named after George Washington, a Founding Father of the United States and the country's first president. The George Washington Bridge is the world's busiest motor vehicle bridge, carrying a traffic volume of over 104 million vehicles in 2019, and is the world's only suspension bridge with 14 vehicular lanes.

<span class="mw-page-title-main">Chelsea Bridge</span> Bridge over the River Thames in west London

Chelsea Bridge is a bridge over the River Thames in west London, connecting Chelsea on the north bank to Battersea on the south bank, and split between the City of Westminster, the London Borough of Wandsworth and the Royal Borough of Kensington and Chelsea. There have been two Chelsea Bridges, on the site of what was an ancient ford.

<span class="mw-page-title-main">Albert Bridge, London</span> Bridge over the River Thames

Albert Bridge is a road bridge over the River Thames connecting Chelsea in Central London on the north bank to Battersea on the south. Designed and built by Rowland Mason Ordish in 1873 as an Ordish–Lefeuvre system modified cable-stayed bridge, it proved to be structurally unsound, so between 1884 and 1887 Sir Joseph Bazalgette incorporated some of the design elements of a suspension bridge. In 1973 the Greater London Council (GLC) added two concrete piers, which transformed the central span into a simple beam bridge. As a result, today the bridge is an unusual hybrid of three different design styles. It is an English Heritage Grade II* listed building.

<span class="mw-page-title-main">Eastern span replacement of the San Francisco–Oakland Bay Bridge</span> Seismic stabilization megaproject in California (2002–2013)

The eastern span replacement of the San Francisco–Oakland Bay Bridge was a construction project to replace a seismically unsound portion of the Bay Bridge with a new self-anchored suspension bridge (SAS) and a pair of viaducts. The bridge is in the U.S. state of California and crosses the San Francisco Bay between Yerba Buena Island and Oakland. The span replacement took place between 2002 and 2013, and is the most expensive public works project in California history, with a final price tag of $6.5 billion, a 2,500% increase from the original estimate of $250 million, which was an initial estimate for a seismic retrofit of the span, not the full span replacement ultimately completed. Originally scheduled to open in 2007, several problems delayed the opening until September 2, 2013. With a width of 258.33 ft (78.74 m), comprising 10 general-purpose lanes, it is the world's widest bridge according to Guinness World Records.

<span class="mw-page-title-main">Three Sisters (Pittsburgh)</span> Bridge in Pittsburgh, Pennsylvania

The Three Sisters are three similar self-anchored suspension bridges spanning the Allegheny River in downtown Pittsburgh, Pennsylvania at 6th, 7th, and 9th streets, generally running north–south. The bridges have been given formal names to honor important Pittsburgh residents:

<span class="mw-page-title-main">Senator William V. Roth Jr. Bridge</span> Bridge in St. Georges, Delaware

The Senator William V. Roth Jr. Bridge is a concrete and steel cable-stayed bridge that spans the Chesapeake & Delaware Canal near St. Georges, Delaware. The bridge is located near a tolled section of Delaware Route 1 that runs parallel to the St. Georges Bridge carrying U.S. Route 13. In November 2006, the bridge was named after U.S. Senator William V. Roth Jr., who not only lent his name to the Roth IRA, but was instrumental in securing federal funding to build the bridge. It is owned and operated by the U.S. Army Corps of Engineers and does not carry a toll, despite the location of a nearby toll plaza.

<span class="mw-page-title-main">Hampden Bridge, Kangaroo Valley</span> Bridge in New South Wales, Australia

Hampden Bridge is a heritage-listed single-span suspension bridge that carries Moss Vale Road (B73) across the Kangaroo River, in Kangaroo Valley, in the City of Shoalhaven local government area of New South Wales, Australia. The bridge was designed by Ernest de Burgh and built by Loveridge and Hudson. The property is owned by Transport for NSW. It was added to the New South Wales State Heritage Register on 2 August 2019.

<span class="mw-page-title-main">Waldo–Hancock Bridge</span> Bridge in Bucksport, Maine

The Waldo–Hancock Bridge was the first long-span suspension bridge erected in Maine, as well as the first permanent bridge across the Penobscot River downstream from Bangor. The name comes from connecting Waldo and Hancock counties. The bridge was built in 1931 and retired in 2006, when the new Penobscot Narrows Bridge was opened just a few yards away. Demolition of the structure was completed by 2013.

<span class="mw-page-title-main">South Tenth Street Bridge</span> Bridge in Pittsburgh, Pennsylvania

The South Tenth Street Bridge, most often called the Tenth Street Bridge, but officially dubbed the Philip Murray Bridge, is a suspension bridge that spans the Monongahela River in Downtown Pittsburgh, Pennsylvania.

<span class="mw-page-title-main">Androscoggin Swinging Bridge</span> Historic Suspension footbridge on the Androscoggin River

The Androscoggin Swinging Bridge is a pedestrian suspension bridge spanning the Androscoggin River in Maine between the towns of Topsham in Sagadahoc County and Brunswick in Cumberland County. The bridge was built in 1892 as a timesaving approach for employees of the Cabot Manufacturing Company of Brunswick, could have safer and easier passage across the river.

<span class="mw-page-title-main">Edmundston–Madawaska Bridge</span> Bridge

The Edmundston–Madawaska Bridge is an international bridge which connects the cities of Edmundston, New Brunswick, in Canada and Madawaska, Maine, in the United States, across the Saint John River. The bridge consists of four steel through truss spans, each 70.71 metres (232.0 ft) in length, for a total length of 287.12 metres (942.0 ft), which carries a two lane open steel grid deck roadway.

<span class="mw-page-title-main">Tacoma Narrows Bridge (1950)</span> Suspension bridge in Washington State

The 1950 Tacoma Narrows Bridge is a suspension bridge in the U.S. state of Washington that carries the westbound lanes of Washington State Route 16 across the Tacoma Narrows strait, between the city of Tacoma and the Kitsap Peninsula. Opened on October 14, 1950, it was built in the same location as the original Tacoma Narrows Bridge, which collapsed due to a windstorm on November 7, 1940. It is the older of the twin bridges that make up the Tacoma Narrows Bridge crossing of the Tacoma Narrows, and carried both directions of traffic across the strait until 2007. At the time of its construction, the bridge was, like its predecessor, the third-longest suspension bridge in the world in terms of main span length, behind the Golden Gate Bridge and George Washington Bridge; it is now the 46th-longest suspension bridge in the world.

<span class="mw-page-title-main">Gay Street Bridge</span> Bridge in Knoxville, TN, USA over the Tennessee River

The Gay Street Bridge is a vehicle bridge that crosses the Tennessee River in Knoxville, Tennessee, United States. Completed in 1898, the 1,512-foot (461 m) bridge is the oldest of four vehicle bridges connecting Downtown Knoxville with South Knoxville, the other three being the Henley Street Bridge, the James E. "Buck" Karnes Bridge, and the James C. Ford Memorial Bridge.

<span class="mw-page-title-main">Maldon, New South Wales</span> Town in New South Wales, Australia

Maldon is a locality in the Macarthur Region of New South Wales, Australia, in the Wollondilly Shire. In the 2016 census it had a population of 15.

<span class="mw-page-title-main">Yale Bridge</span> United States historic place

The Yale Bridge or Lewis River Bridge spans the Lewis River near Yale, Washington. It was built in 1932 by Cowlitz and Clark counties. The suspension bridge has a clear span of 300 feet (91 m), with a total length of 532 feet (162 m), replacing a previous steel truss bridge at the site. Construction of the Ariel Dam had created Lake Merwin with a water depth of 90 feet (27 m) at the site, requiring a new bridge that did not need to have support piers in the water. The road deck, stiffened by a steel Warren truss, is 50 feet (15 m) above the high water line of the reservoir.

<span class="mw-page-title-main">Market Street Bridge (Ohio River)</span> Bridge over the Ohio River near Steubenville, Ohio, United States

The Market Street Bridge is a suspension bridge connecting Market Street in Steubenville, Ohio and West Virginia Route 2 in Follansbee, West Virginia over the Ohio River. As a project of the Steubenville Bridge Company, it was constructed in 1905 by the Ohio Steel Erection Company, the framework was created by the Penn Bridge Company, and the original steel was done by Jones and Laughlin Steel Company and Bethlehem Steel. The bridge spans a length of 1,794 feet (547 m) with a width of 20.7 feet (6.3 m). As of 2002, the average daily traffic was estimated around 15,000 vehicles. It was listed on the National Register of Historic Places in 2019.

<span class="mw-page-title-main">Evergreen Point Floating Bridge</span> Floating bridge carrying a freeway in Seattle, Washington

The Evergreen Point Floating Bridge, also known as the 520 Bridge and officially the Governor Albert D. Rosellini Bridge, is a floating bridge that carries Washington State Route 520 across Lake Washington from Seattle to its eastern suburbs. The 7,710-foot-long (2,350 m) floating span is the longest floating bridge in the world, as well as the world's widest measuring 116 feet (35 m) at its midpoint. It is a toll bridge and uses electronic collection.

Boeckman Bridge was a historic suspension bridge over Big Tavern Creek near St. Elizabeth, Miller County, Missouri, listed on the National Register of Historic Places. It was built in 1926, and was replaced by a concrete bridge in 2002.

References

  1. 1 2 3 4 5 Patricia J. Warren (May 2019). "NRHP Nomination:Baring Bridge (including accompanying 43 photos, from 1910–2019)" (National Register of Historic Places). National Park Service.
  2. 1 2 3 4 "Baring Bridge #509A: Existing Conditions\Project Urgency". King County Department of Transportation. Retrieved February 20, 2020.
  3. 1 2 "Local News: FYI". The Everett Herald . July 10, 2007. Retrieved February 21, 2020.
  4. "Tallying up the water's toll" . The Seattle Times. November 27, 1990. p. A1 via NewsBank.
  5. "Baring Bridge #509A Replacement Project". King County Department of Transportation. Retrieved February 20, 2020.
  6. "Baring Bridge Replacement Project". King County, Washington. January 26, 2019. Retrieved June 14, 2023.