 | This article has multiple issues. Please help improve it or discuss these issues on the talk page . (Learn how and when to remove these template messages)
|
The Cliff Hanger is an amusement park ride that is meant to simulate hang gliding.
| This article has multiple issues. Please help improve it or discuss these issues on the talk page . (Learn how and when to remove these template messages)
|
The Cliff Hanger is an amusement park ride that is meant to simulate hang gliding.
This device consist of a steel boom with a hinged end. Attached to the boom are hydraulic cylinder rams that push the boom upward about 75 degrees off a base trailer with supporting outriggers, or concrete set in. Attached to the opposite end of the boom the hitch is on, is a avon bearing in which a circular collar is fixed. The collar has sweeps attached via bushings, sweeps primarily consist of foldable triangular truss structures. Attached to the parameter of the sweeps are gondola cars with kite tops. The cars are designed to hold 3 people in a laid position. In the center most models of these rides have a pyramid style center ornament with lights. This ride also has a very strong light package set, running along the perimeter of the sweep to sweep cams. The ride most commonly uses kites, flags and banners in its operating structure to hide its skeletal lurking beams. The rides paint usually consists of neon, or bold colors. The overall design of the ride is similar to the Star Trooper ride, also manufactured by Dartron.
The ride starts off by the boom lifting a few feet of the ground then starts to spin at a 65 degree tilt, sending passengers flying 50 feet in the air.
The ride Paratrooper is similar, but riders sit up instead of lying down.
This ride is built with two operating modes, manual or automatic. Most carnivals like to use the automatic mode, for it is easier on the ride as well as its operator. The manual mode can be used if someone needs to get off, or to shorten the ride for any reason. Most controls of these rides are fixed with a foot pedal that will deactivate controls in absence of operator.
Parasailing, also known as parascending, paraskiing orparakiting, is a recreational kiting activity where a person is towed behind a vehicle while attached to a specially designed canopy wing that resembles a parachute, known as a parasail wing. The manned kite's moving anchor may be a car, truck, or boat. The harness attaches the occupant to the parasail, which is connected to the boat, or land vehicle, by the tow rope. The vehicle then drives off, carrying the parascender and person into the air. If the boat is powerful enough, two or three people can parasail behind it at the same time. The parascender has little or no control over the parachute. The activity is primarily a fun ride, not to be confused with the sport of paragliding.
Left-foot braking is the technique of using the left foot to operate the brake pedal in an automobile, leaving the right foot dedicated to the throttle pedal. It contrasts with the practice of using the left foot to operate the clutch pedal, leaving the right foot to share the duties of controlling both brake and gas pedals.
An automatic transmission is a multi-speed transmission used in motor vehicles that does not require any input from the driver to change forward gears under normal driving conditions.
A dead man's switch is a switch that is designed to be activated or deactivated if the human operator becomes incapacitated, such as through death, loss of consciousness, or being bodily removed from control. Originally applied to switches on a vehicle or machine, it has since come to be used to describe other intangible uses, as in computer software.
A transmission is a mechanical device which uses gears to change the speed or direction of rotation in a machine. Many transmissions have multiple gear ratios, but there are also transmissions that use a single fixed gear ratio.
A manual transmission (MT), also known as manual gearbox, standard transmission, or stick shift, is a multi-speed motor vehicle transmission system, where gear changes require the driver to manually select the gears by operating a gear stick and clutch.
Freestyle BMX is bicycle motocross stunt riding on BMX bikes. It is an extreme sport descended from BMX racing that consists of five disciplines: street, park, vert, trails, and flatland. In June 2017, the International Olympic Committee announced that freestyle park was to be added as an Olympic event to the 2020 Summer Olympics.
A vertical stabilizer or tail fin is the static part of the vertical tail of an aircraft. The term is commonly applied to the assembly of both this fixed surface and one or more movable rudders hinged to it. Their role is to provide control, stability and trim in yaw. It is part of the aircraft empennage, specifically of its stabilizers.
Corkscrew is a steel roller coaster located at Cedar Point in Sandusky, Ohio, United States. Built by Arrow Development and designed by Ron Toomer, it opened to the public on May 15, 1976. The coaster features Arrow's first vertical loop and was built during the same time period as The New Revolution at Magic Mountain. Revolution, which opened seven days prior, is credited as the first modern-day coaster to feature a vertical loop, while Corkscrew is credited as the first roller coaster in the world with three inversions.
In road vehicles, the parking brake, also known as a handbrake or emergency brake (e-brake), is a mechanism used to keep the vehicle securely motionless when parked. Parking brakes often consist of a pulling mechanism attached to a cable which is connected to two wheel brakes. In most vehicles, the parking brake operates only on the rear wheels, which have reduced traction while braking. The mechanism may be a hand-operated lever, a straight pull handle located near the steering column, or a foot-operated pedal located with the other pedals.
A transmission control unit (TCU), also known as a transmission control module (TCM), or a gearbox control unit (GCU), is a type of automotive ECU that is used to control electronic automatic transmissions. Similar systems are used in conjunction with various semi-automatic transmissions, purely for clutch automation and actuation. A TCU in a modern automatic transmission generally uses sensors from the vehicle, as well as data provided by the engine control unit (ECU), to calculate how and when to change gears in the vehicle for optimum performance, fuel economy and shift quality.
The Condor is the trade name of an amusement ride sold by HUSS of Bremen, Germany. It was debuted at the 1984 New Orleans World's Fair, under the name "Cyclo Tower".
The Top Spin is a thrill ride developed by HUSS Park Attractions, and is the generic name for a series of rides from other manufacturers that follow the same principle. The ride consists of a passenger platform suspended between two counterweighted arms. The arms are turned by motors, while the platform typically only has brakes that are engaged and disengaged at various points of the ride cycle. A typical top spin program runs the main arm motors while engaging and disengaging the platform brakes so that it will rotate in exciting ways. The minimum rider height requirement is 54 inches; maximum is 80 inches due to the seat and restraint design. The ride was introduced to the public in 1990 and proved an instant success with European fairgoers.
The Hurricane is an amusement ride first manufactured by the Allan Herschell Company. The Hurricane was first created in the 1940s, first known as the Saturn 6, and was later built by Mulligan as the Hurricane. The modern versions of the Hurricane were produced by a series of related companies, including Hrubetz, Man-Co, Killinski, Dartron Industries and now Battech. Hurricanes have been licensed for production in countries other than the United States, although the number of non-U.S. constructed rides is limited.
The Ali Baba is a type of amusement ride consisting of a stationary horizontal gondola with a 360 degree swinging pendulum.
An enhanced motion vehicle, or EMV, is a ride vehicle developed by Walt Disney Imagineering, a component of The Walt Disney Company, for use in amusement park rides located at Disney's theme parks. Riders are seated on a modified motion simulator base that is mounted on a wheeled chassis. As the vehicle travels through the attraction, the motion base simulates movement, such as driving over rough terrain or leaning through a turn, that makes the ride experience appear more realistic.
Human-powered watercraft are watercraft propelled only by human power, instead of being propelled by wind power or an engine.
A motorcycle transmission is a transmission created specifically for motorcycle applications. They may also be found in use on other light vehicles such as motor tricycles and quadbikes, go-karts, offroad buggies, auto rickshaws, mowers, and other utility vehicles, microcars, and even some superlight racing cars.
Car controls are the components in automobiles and other powered road vehicles, such as trucks and buses, used for driving and parking.
The Capital Wheel is a Ferris wheel at National Harbor, Maryland, just outside Washington, D. C., in the United States. It opened on May 23, 2014.
