Holden (automobile)

Last updated
Holden
Holden Kingswood (1971-1974 HQ series) 03.jpg
Holden HQ Kingswood Wagon (1971–1974)
Overview
Manufacturer Holden
Also called
Production1948–1984
Assembly Victoria

New South Wales

South Australia

Queensland

Western Australia

Body and chassis
Class Full-size car
Body style
Layout Front-engine, rear-wheel-drive
Related
Powertrain
Engine
Chronology
Successor Holden Commodore

The Holden is a full-sized car produced by the company of the same name across 5 generations from 1948 until 1984. The Holden is also commonly referred to by their model designation (e.g., HQ) and also the H Series. The Holden was introduced to be Australia's car, being the first full scale produced automobile exclusive to the country. Prior to which, General Motors Holden's Ltd. assembled imported CKD kits from overseas General Motors subsidiaries such as Chevrolet, Buick, Vauxhall and others. And the only other cars built in the country being Ford and Chrysler vehicle bodies fitted to imported chassis. The Holden was an instant success among Australians, being the first production car built solely for Australia's unique, rough roads.

Contents

The Holden Ute was derived from the Holden. Until 1971, the Ute retained the rear floorpan of the sedan, although it was beneath the Ute's tray floor.

The Holden was produced in all states (excluding territories and Tasmania) of Australia at varying stages of its lifetime.

Between 1960 and 1968 Holden vehicles were able to be modified to left-hand drive for markets such as Hawaii. Right-hand drive Holdens were exported all throughout its lifetime to countries such as South Africa where they were rebadged as Chevrolets. [1]

Some versions of the Holden ended up in Japan and were sold as the Mazda Roadpacer, powered by a 13B Rotary engine.

Upon its introduction the Holden was available in a single trim level, however it soon adopted the naming of Holden Standard, Holden Business and Holden Special. The Holden Business was soon phased out due to being unpopular due to its awkward mid-range position. In 1963, the Holden Premier was introduced, placed significantly higher than the Special, with many more luxury focused components. In 1968 with the launch of the HK series, the Standard and Special were replaced by the Holden Belmont and Holden Kingswood respectively, along with Holden's first coupe model, the Holden Monaro, [2] and also the first Long-wheelbase model, the Holden Brougham, to compete with the wildly successful Ford Fairlane. In 1971, the Brougham was replaced by the Statesman upon the launch of the fully redesigned HQ series, this model was now devoid of the Holden name, however remained essentially the same car. Also along with the HQ came the cab chassis Holden One Tonner. The Holden remained essentially unchanged throughout the 1970s, with only minor style changes, and the coupe model ceasing production after the HX series, until 1980 with the introduction of the WB series when the sedan and station wagon models were both also dropped, leaving only the ute and panelvan in the range, which gained the Statesman WB front clip. The Holden was discontinued as a whole in 1984, as Holden turned its focus entirely to the Holden Commodore.

By the time production of the Holden ceased in 1984, total production of the Holden reached 3,330,401.

First generation (1948–1956)

First generation
2012 NRMA Motorfest - Flickr - NRMA New Cars (56).jpg
a Holden FX
Overview
Production1948–1956
Body and chassis
Class Full-size
Body style
Related Holden 48-215
Holden 50-2106
Holden FJ
Powertrain
Engine
Transmission 3 speed manual

The First Generation of the Holden was heavily influenced by a pre-World War II Chevrolet design and is shown clearly by its similarities to the Chevrolet Fleetline, the design was axed in the US due to it being deemed likely to small too succeed in their local market. [3]

48-215 & 50-2106 (FX)

Production: 120,402 examples The Holden 48-215 was the first Australian made and designed vehicle on the market, based on a stillborn Chevrolet design. Powered by a 132 cubic inch Inline 6, built by Holden, but like the car itself, based on an American design. This first model was built exclusively in Port Melbourne at the Holden Headquarters.

FJ

Production: 169,969 examples.

Second generation (1956–1962)

Second generation
1961-62 EK Special Sedan==.JPG
A 1961–1962 EK Special sedan.
Overview
Also called Holden FE
Holden FC
Holden FB
Holden EK
Production1956–1962
Body and chassis
Class Full-size
Body style
Powertrain
Engine
Transmission 3 speed manual
3 speed Roto Hydramatic

The initial Second Generation Holdens were a lot more European than its predecessor, showing striking similarities to that of Vauxhall. The later Second Generation Holdens took a hard turn towards a significantly more American styling, and is very similar to, and to those unaware could be confused with a '57 Chevy. [4]

FE

Production: 155,161 examples.

FC

Production: 191,724 examples.

FB

During the FBs model run, what would become Holden's biggest local competitor for the next over 40 years, the Ford Falcon, was introduced. Holden however retained a 49.6 percent market share in 1961, still outselling the rival Falcon by an impressive margin.

Production: 174,747 examples.

EK

The EK was a minor redesign of the FB, with the only noticeable variation between the two being in badgework and chrome trim.

Production: 150,214 examples.

Third generation (1962–1968)

Third generation
Holden HR Premier X2.jpg
A Holden HR Premier X2.
Overview
Production1962–1968
Body and chassis
Class Full-size
Body style
Related Holden EJ
Holden EH
Holden HD
Holden HR
Powertrain
Engine
Transmission 3 speed manual
2 speed Powerglide
3 speed Hydramatic

The Third Generation Holden introduced a new styling with a unique angular grille, and the introduction of the new flagship Premier specification, finally bringing bucket seats to the Holden, alongside many other luxury options. [5] The Latter half of the Third Generation Holden was highly inspired by the 1963 Vauxhall FC Victor. With this half came advanced safety features such as front end disk brakes in the HD, and seatbelts in the HR. Holden also started experimenting with coupés during the HR era, however never came to a decision, few prototypes were created, and thus the location of such are unknown. It is a possibility these cars were crushed however GMH never commented on the fate of these vehicles. [6] [7] [8]

EJ

Prouduction: 154,811 examples.

EH

The EH was only a minor redesign over the EJ, however the groundbreaking change with the EH was the introduction of the much more modern red motor, finally moving away from the outdated grey motor used in earlier models. The EH also introduced the first homologation special holden, the 'S4 special', of which 126 were produced. [9]

Production: 256,959 examples.

HD

The HD was a massive redo of the look of the Holden, with a more refined grille, and the extended front fenders that were fought over at GM's design headquarters in Detroit.

Production: 178,927 examples.

HR

The HR was a mild but much more successful refinement over the HD, with shortened front guards, grille mounted indicators, giving the illusion of quad-headlights, giving a much more luxury design over its predecessor. Also alongside the HR came the 186 cubic-inch variant of the red motor. Along with the first mass produced sport oriented Holden engine, the 186X2 available as part of the X2 option on Holden Special and Holden Premier models.

Production: 252,352 examples.

Fourth generation (1968–1971)

Fourth generation
1969 Holden Monaro HT GTS 350 (cropped).jpg
A 1969 HT Holden Monaro GTS 350
Overview
Also called Holden HK
Holden HT
Holden HG
Holden Brougham
Chevrolet Kommando (ZA)
Chevrolet El Camino (ZA) [10]
Chevrolet SS (ZA)
Production1968–1971
Body and chassis
Class Full-size
Body style
Powertrain
Engine
Transmission 3 speed manual
4 speed manual
2 speed Powerglide
3 speed Trimatic

The Fourth Generation holden was a big evolution for the Holden, with the introduction of the long-awaited Monaro coupe, official use of V8 engines, and Holdens stab at the Ford Fairlane's market share, the Long-wheelbase Holden Brougham. [12]

HK

The HK introduced the new Monaro, and with that came the wildly popular GTS trim level, however the model was the all new 327 cub-inch small block chevrolet V8 powered Monaro GTS327

Production: 199,039 examples.

HT

The HT was a minor revision over the HK, but with the replacement of the GTS327 by the GTS350. Also with the HT came the brand new Holden V8 engine, replacing the previous 305 and 307 Chevrolet items. The 308 cubic-inch Holden V8 was initially only available in the HT Brougham, as GMH still needed to liquidate stock of the smaller American V8s.

Production: 183,402 examples.

HG

The HG design was again, similar to the two models that came before it, The HG introduced the 308 engine to the lower specification models, along with the new TriMatic 3-speed automatic gearbox, finally bringing automatic transmissions into the mainstream line up, being less expensive than the imported PowerGlide and HydraMatic transmissions that were available prior. Although the 3-speed Turbo-HydraMatic 350 was still available behind the Holden 308, and the remaining imported Chevrolet 350.

Production: 155,787 examples.

Fifth generation (1971–1985)

Fifth generation
1971 HQ Duchess Gold LS==.JPG
A 1971 Holden HQ Monaro LS Coupe
Overview
Also called Holden HQ
Holden HJ
Holden HX
Holden HZ
Holden WB
Mazda Roadpacer
Production1971–1985
Body and chassis
Class Full-size
Body style
Platform Holden HQ platform
Related Statesman
Powertrain
Engine
Transmission 3 speed manual
4 speed manual
3 speed Trimatic
3 speed Hydramatic
3 speed Jatco 3N71B automatic (Japan)
Chronology
Successor Holden Commodore

The Introduction of the fifth generation of Holden in 1971 marked the first full redesign since the original 48-215 in 1948. With this change can the new Semi-monocouque architecture for coupé, sedan and station wagon models and a full body-on-chassis design for the ute, panelvan and newly introduced one tonner model. The Brougham was also dropped in favour of the new Statesman model, which no longer carried the Holden name. [13]

HQ

The Holden HQ is yet another heavily Chevrolet inspired design, sharing likeness with the Camaro and Chevelle. The HQ was the last Holden model to feature a Chevrolet Small Block V8 until the introduction of the Series II VT Commodore in 1999. With the HQ Monaro came the LS, a variant similar to the sedan and wagon's Premier specification. The HQ Monaro could be a lot more luxury focused, without the looming effect of homologation, as Holden's motorsport teams turned towards the smaller Torana.

Production: 485,650 examples. The most of any Holden ever produced

HJ

The HJ introduced a more Cadillac-esque styling to the Holden, with the return of the large chrome grilles. The Monaro however retained the HQ style taillights, along with the One Tonner remaining largely unchanged with the exception of dashboard design.

Production: 176,202 examples.

HX

The HX introduced ADR27A-compliant engines and is known for the Monaro Limited Edition, designed as a runout model for the remaining coupe bodyshells, all 580 examples of the LE were identical to each other.

Production: 110,669 examples.

HZ

The main changes that came with the HZ holden are the introduction of Radial Tuned Suspension (RTS) technology, previously tested in the LX Torana, along with the deletion of the coupé body style and the deletion of the Belmont trim level, now simply called Holden.

Production: 154,155 examples.

WB

With the release of the WB range, the sedan and station wagon bodystyles were dropped, leaving only the ute, panelvan and cab chassis body styles, the WB also introduced the Blue motor, bringing an end to the Red's 17 year run. After the WB ended production, production of the Holden came to an end after 36 years, with Holden moving their focus to its smaller Commodore model.

Production: 60,231 examples.

Variants

And its derivative Holden SS

And its commercial vehicle based derivative the Holden Sandman.

Holden Overlander

The Holden overlander was a 4x4 converted version of the Holden ute and wagon, optioned with a Holden 308 V8, Turbo 400 gearbox, along with axels & transfer case manufactured specially for the Overlander by Dana in the USA. The Overlander was made by Arthur Hayward in Launceston, Tasmania from brand new Holden utes and wagons. GMH denied selling bare shells, however did retain their factory warranty for buyers of the Overlander. [14]

Body styles

Sedan

The first body style ever introduced for the Holden in 1948 with the FX, it consisted of a 4-door, 5 seat design with a full size boot separated from the cabin space by the rear seat cushion.

Coupe Utility

The Coupe Utility or ‘Ute’ Was introduced in 1951 to compete with Ford Australia's wildly popular Coupe Utility, it maintained the sedans front doors forwards, yet had a completely redesigned rear end. In 1971, Alongside the Panel Van, the Ute was given a Body-on-Chassis style design over the classic unibody style.

Panel Van

The Panel Van was introduced shortly after the Ute, essentially a Commercial van based on the Ute with a Fixed sheet metal hardtop.

Wagon

The Wagon was introduced with the FE Generation, it was essentially identical to the sedan forward of the rear doors, which themselves were modified to flow with the extended roofline, with a squarer rear end, a lift back rear hatch and the rear seat back, this time acting as a luggage divider rather than completely separating the boot space from the cabin.

Coupe

The much anticipated Coupé body style was introduced in 1968 in the HK range to compete with the Falcon Futura and Valiant coupes of the time, the Coupe's front clip and boot-lid were essentially the only crossover panels between the Coupé and Sedan, with restyled rear quarter panels and extended doors.

Long-Wheelbase Sedan

The Long-Wheelbase Brougham was introduced to compete against the Ford Fairlane, the Brougham was essentially a standard Holden Sedan with an extended boot and some adjustment to the rear of the cabin space. In 1971, the Brougham was phased out and replaced by the Statesman, a model of essentially the same goal, however the Statesman saw some success in chipping into the Fairlane's market share.

One Tonner

The One Tonner was introduced alongside the HQ range in 1971, the ‘Tonner was essentially a Coupe Utility with the rear tray section removed implementing a Cab-Chassis design, the ‘Tonner also featured an extended Ladder frame.

See also

Related Research Articles

<span class="mw-page-title-main">Holden</span> Defunct Australian automobile manufacturer

Holden, formerly known as General Motors-Holden, was an Australian subsidiary company of General Motors. Founded in Adelaide, South Australia, it was an automobile manufacturer, importer, and exporter that sold cars under its own marque in Australia. In its last three years, it switched entirely to importing cars. It was headquartered in Port Melbourne, with major industrial operations in the states of South Australia and Victoria. The 164-year-old company ceased trading at the end of 2020.

<span class="mw-page-title-main">Chevrolet Caprice</span> Motor vehicle

The Chevrolet Caprice is a full-size car produced by Chevrolet in North America for the 1965 through 1996 model years. Full-size Chevrolet sales peaked in 1965, with over a million units sold. It was the most popular car in the U.S. in the 1960s and early 1970s, which, during its production, included the Biscayne, Bel Air, and Impala.

<span class="mw-page-title-main">Holden Monaro</span> Motor vehicle

The Holden Monaro is a car that was manufactured by General Motors' Australian division Holden. It has a front-engine, rear-wheel-drive layout and was produced with a two-door coupé body from 1968 to 1975 and again from 2001 to 2006 and with a 4-door sedan body from 1973 to 1977.

<span class="mw-page-title-main">Ford LTD (Americas)</span> Model range of Ford automobiles (1965-1986)

The Ford LTD is a range of automobiles manufactured by Ford for the 1965 to 1986 model years. Introduced as the highest trim level of the full-size Ford model range, the LTD moved the Ford range upmarket, offering options and features previously reserved for Mercury and Lincoln vehicles. For much of its production life, the LTD competed against the Chevrolet Caprice ; the Mercury Marquis served as its divisional counterpart from 1967 until 1986.

<span class="mw-page-title-main">Holden Kingswood</span> Motor vehicle

The Holden Kingswood is a full-size car that was developed and manufactured in Australia by Holden, from the beginning of the HK series in 1968 through to the conclusion of the WB series in 1985. Prior to 1968, the full-size Holden range of family cars comprised the Holden Standard, the Holden Special, and Holden Premier models. Initially, the HK range of models included the basic Holden Belmont, the Kingswood, and the luxury-oriented Holden Premier, all of which were manufactured in a choice of sedan and station wagon bodies. Commercial variants were offered in three types: coupé utility, panel van, and later from 1971, a heavy-duty Holden One Tonner cab chassis. The utility (ute) version was originally marketed in both Belmont and Kingswood configurations. However, after the Belmont name was deleted from commercials at the end of HQ in late 1974, the base model commercials were sold only with the "Holden" badge.

<span class="mw-page-title-main">Ford LTD II</span> Motor vehicle

The Ford LTD II is an automobile produced and marketed by Ford Motor Company between 1977 and 1979 in the United States and Canada. Deriving its name from the full-sized Ford LTD model line, the intermediate LTD II consolidated the Ford Torino and Gran Torino model lines, with the Ford Elite replaced by the Ford Thunderbird. Offered in a two-door sedan, four-door sedan, and station wagon, the LTD II also served as a basis for the final generation of the Ford Ranchero coupe utility.

<span class="mw-page-title-main">Panel van</span> Cargo vehicle based on passenger car chassis

A panel van, also known as a delivery van, blind van, car-derived van or sedan delivery, is a small cargo vehicle with a passenger car chassis, typically with a single front bench seat and no side windows behind the B-pillar. Panel vans are smaller than panel trucks or cargo vans, both of which use body-on-frame truck chassis.

<span class="mw-page-title-main">Holden Ute</span> Australian mid-size coupe utility

The Holden Ute was a coupe utility built by Holden, the Australian subsidiary of General Motors, since 2000. Before then, Holden had marketed their Commodore-based utility models under the Holden Utility (VG) and Holden Commodore utility names, although the term “Holden Ute” was also used in their official marketing literature. The Holden Ute name is often used for earlier Holden Utility models as the word "ute" is a colloquial term used commonly in Australia for a utility vehicle. Holden's performance division, an independent company called HSV assembled a high-performance version called the Maloo. Between 2003 and 2007, Holden built a stretched, crew cab version of the Ute with four doors and seating for five, called the Holden Crewman and between 2003 and 2005 a cab-chassis version known as the Holden One Tonner.

<span class="mw-page-title-main">Holden Commodore (VZ)</span> Motor vehicle

The Holden Commodore (VZ) is a full-size car that was produced by Holden from 2004 to 2006 as a sedan and to 2007 as a wagon and Ute sold alongside the new VE series. It was the fourth and final iteration of the third generation of the Commodore and the last to spawn a coupé variant. Its range continued to include the luxury variants, Holden Berlina (VZ) and Holden Calais (VZ).

<span class="mw-page-title-main">Ute (vehicle)</span> Short for "utility" vehicle

A ute, originally an abbreviation for "utility" or "coupé utility", is a term used in Australia and New Zealand to describe vehicles with a tonneau behind the passenger compartment, that can be driven with a regular driver's licence.

<span class="mw-page-title-main">Ford Falcon (AU)</span> Motor vehicle

The Ford Falcon (AU) is a full-size car that was produced by Ford Australia from 1998 to 2002. It was the sixth generation Ford Falcon and also included the luxury-oriented Ford Fairmont (AU) model range. The AU series replaced the EL Falcon and was built on the then-new EA169 platform, which continued to underpin Falcon models until 2010, when the BF wagon was discontinued, and Ford Territory models until 2011. The AU series was replaced by the BA series.

Full-size Ford is a term adopted for a long-running line of Ford vehicles with a shared model lineage in North America. Originating in 1908 with the Ford Model T, the line ended in 2019 with the Ford Taurus, as Ford withdrew from the full-sized sedan segment in North America. Across 111 years, 15 generations, and over 60 million examples of the model line were produced across over 50 model nameplates. By contrast, the longest-running single nameplate worldwide is the Chevrolet Suburban, in use since the 1935 model year.

<span class="mw-page-title-main">Statesman (automobile)</span> Automotive marque created in 1971 by Holden

Statesman is an automotive marque created in 1971 by the Australian General Motors subsidiary, Holden. Statesman vehicles were sold through Holden dealerships, and were initially based on the mainstream Holden HQ station wagon platform, thereby providing more interior room and generally more luxurious features than their Holden-branded sedan siblings. Production ceased with the last of the WB series cars in January 1985.

<span class="mw-page-title-main">Holden HQ</span> Motor vehicle

The Holden HQ series is a range of automobiles that was produced by Holden in Australia from 1971 to 1974. The HQ was released on 15 July 1971, replacing the Holden HG series. It was the first ground-up redesign of the Holden line since its original release in 1948, and included an all-new body, chassis, and suspension. The HQ was later developed into a series of successor models, finally ending production when the WB series was discontinued in 1985.

<span class="mw-page-title-main">Holden HK</span> Motor vehicle

The Holden HK series is an automobile which was produced by Holden in Australia from 1968 to 1969. Introduced in January 1968, the HK range progressively replaced the Holden HR series which had been in production since 1966. HK models were both larger and heavier than their predecessors and the range would ultimately include thirteen different models against the eight of the HR range. The Holden HK was marketed under Belmont, Kingswood, Premier, Brougham and Monaro model names.

<span class="mw-page-title-main">Holden HJ</span> Motor vehicle

The Holden HJ is a series of automobiles which were produced by Holden in Australia from 1974 to 1976. The HJ series was released on 4 October 1974 and was an improved and facelifted version of the superseded Holden HQ series which had been in production since 1971.

<span class="mw-page-title-main">Holden HX</span> Motor vehicle

The Holden HX is a range of automobiles which was produced by Holden in Australia from 1976 to 1977.

<span class="mw-page-title-main">Holden HT</span> Motor vehicle

The Holden HT series is a range of automobiles which was produced by Holden in Australia between 1969 and 1970.

<span class="mw-page-title-main">Holden HG</span> Motor vehicle

The Holden HG is an automobile which was produced by Holden in Australia between 1970 and 1971. It was marketed under Belmont, Kingswood, Premier, Brougham and Monaro model names.

<span class="mw-page-title-main">Coupé utility</span> Automotive body style

A coupé utility is a vehicle with a passenger compartment at the front and an integrated cargo tray at the rear, with the front of the cargo bed doubling as the rear of the passenger compartment.

References

  1. "Holden's export history". The Age. 2005-09-01. Retrieved 2022-11-14.
  2. "Holden Monaro History". richardlewis.org. Retrieved 2022-11-15.
  3. "FX-FJ Holdens". Whichcar.com.au. 2018-11-29. Retrieved 2022-11-10.
  4. "holden FB-EK history". Whichcar.com.au. 2018-12-16. Retrieved 2022-11-10.
  5. "Holden EH Premier". Whichcar.com.au. 2014-08-07. Retrieved 2022-11-14.
  6. "Holden HR SS Coupe revealed". cars4starters.com.au. 19 December 2021. Retrieved 2022-11-15.
  7. "HR Holden Coupe was planned". carsguide.com.au. 2012-04-25. Retrieved 2022-11-15.
  8. "Retroautos January - The inside story of the HR coupe! Plus, Vauxhall's luxury-sports VX 4/90 sedan, the Mercury XM 800 dream car & a classic speedway sprint car". shannons.com.au. 2018-01-01. Retrieved 2022-11-15.
  9. "The Red Motor was one of Holden's best six-cylinder engines, and here's why". carsguide.com.au. 2018-01-23. Retrieved 2022-11-14.
  10. Holden abroad, Restored Cars #220, Sep-Oct 2013, pages 45 to 47
  11. 1970 Holden HT Brougham, Restored Cars #174, Jan-Feb 2006, pages 27 to 28
  12. "Holden Monaro turns 50 part one - HK, HT, HG". Whichcar.com.au. 2018-07-31. Retrieved 2022-11-10.
  13. "Holden Monaro turns 50 part two - HQ, HJ, HX, HZ history". Whichcar.com.au. 2018-08-03. Retrieved 2022-11-10.
  14. "Holden Overlander HZ wagon". Whichcar.com.au. 2020-06-08. Retrieved 2022-11-14.