Names | |
---|---|
IUPAC name diiodyloxylead | |
Other names Lead(II) iodate | |
Identifiers | |
3D model (JSmol) | |
108301 (G) | |
ChemSpider | |
ECHA InfoCard | 100.042.866 |
EC Number |
|
PubChem CID | |
| |
| |
Properties | |
Pb(IO3)2 | |
Molar mass | 557.01 g/mol |
Appearance | white crystal powder |
Density | 6.5 g/cm3 |
Melting point | 300 °C (572 °F; 573 K) |
3.61·10−5 M [1] | |
Solubility product (Ksp) | 3.69·10−13 [2] |
−131·10−6 cm3/mol [2] | |
Structure | |
orthorhombic [2] | |
Thermochemistry | |
Std molar entropy (S⦵298) | 312.9632 J/(mol·K) |
Std enthalpy of formation (ΔfH⦵298) | −495.3856 kJ/mol |
Pharmacology | |
Pharmacokinetics: | |
Ingestion limit: 50 μg/m3 | |
Hazards | |
Occupational safety and health (OHS/OSH): | |
Main hazards | oxidizer |
GHS labelling: [3] | |
Danger | |
H272, H302, H332, H360, H373, H410 | |
P203, P210, P220, P260, P261, P264, P270, P271, P273, P280, P301+P317, P304+P340, P317, P318, P319, P330, P370+P378, P391, P405, P501 | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). |
Lead(II) iodate is an inorganic compound with the molecular formula Pb(IO3)2. It is naturally found as heavy white powder.
One way to produce lead(II) iodate involves the reaction of lead nitrate with double moles of potassium iodate. Lead iodate can be precipitated precisely by simultaneous dropwise addition of equivalent solutions of lead nitrate and potassium iodate with water as a solvent at around 60 °C. [1]
Pb(NO3)2(aq) + KIO3(aq) → KNO3(aq) + Pb(IO3)2(s)
Industrial mass production methods use a less precise method due to higher quantities of reactants. Many other group 1 elements can be used in place of potassium to add iodate to the reaction due to solubility of group 1 element iodates.
One use for the compound lead(II) iodate is the volumetric determination of lead content in ore. The determination of lead content in a sample of ore begins with the precipitation and separation of lead as a sulfate. The solution of this lead sulfate product is then slightly acidified and the lead is precipitated out as lead(II) iodate out by adding potassium iodate. Lead(II) iodate can then be titrated in the presence of hydrochloric acid and chloroform to indicate the exact amount of lead that was dissolved from the original ore sample. In this chemical process lead(II) iodate is used to isolate the lead found in a sample of ore from other chemicals present so that it can be studied and quantitated effectively. [4]
In chemistry, a salt is a chemical compound consisting of an ionic assembly of positively charged cations and negatively charged anions, which results in a compound with no net electric charge. A common example is table salt, with positively charged sodium ions and negatively charged chloride ions.
Silver nitrate is an inorganic compound with chemical formula AgNO
3. It is a versatile precursor to many other silver compounds, such as those used in photography. It is far less sensitive to light than the halides. It was once called lunar caustic because silver was called luna by ancient alchemists who associated silver with the moon. In solid silver nitrate, the silver ions are three-coordinated in a trigonal planar arrangement.
In an aqueous solution, precipitation is the process of transforming a dissolved substance into an insoluble solid from a supersaturated solution. The solid formed is called the precipitate. In case of an inorganic chemical reaction leading to precipitation, the chemical reagent causing the solid to form is called the precipitant.
Potassium chlorate is a compound containing potassium, chlorine and oxygen, with the molecular formula KClO3. In its pure form, it is a white crystalline substance. After sodium chlorate, it is the second most common chlorate in industrial use. It is a strong oxidizing agent and its most important application is in safety matches. In other applications it is mostly obsolete and has been replaced by safer alternatives in recent decades. It has been used
The common-ion effect refers to the decrease in solubility of an ionic precipitate by the addition to the solution of a soluble compound with an ion in common with the precipitate. This behaviour is a consequence of Le Chatelier's principle for the equilibrium reaction of the ionic association/dissociation. The effect is commonly seen as an effect on the solubility of salts and other weak electrolytes. Adding an additional amount of one of the ions of the salt generally leads to increased precipitation of the salt, which reduces the concentration of both ions of the salt until the solubility equilibrium is reached. The effect is based on the fact that both the original salt and the other added chemical have one ion in common with each other.
Lead(II) sulfate (PbSO4) is a white solid, which appears white in microcrystalline form. It is also known as fast white, milk white, sulfuric acid lead salt or anglesite.
In environmental chemistry, the chemical oxygen demand (COD) is an indicative measure of the amount of oxygen that can be consumed by reactions in a measured solution. It is commonly expressed in mass of oxygen consumed over volume of solution which in SI units is milligrams per litre (mg/L). A COD test can be used to easily quantify the amount of organics in water. The most common application of COD is in quantifying the amount of oxidizable pollutants found in surface water or wastewater. COD is useful in terms of water quality by providing a metric to determine the effect an effluent will have on the receiving body, much like biochemical oxygen demand (BOD).
Gravimetric analysis describes a set of methods used in analytical chemistry for the quantitative determination of an analyte based on its mass. The principle of this type of analysis is that once an ion's mass has been determined as a unique compound, that known measurement can then be used to determine the same analyte's mass in a mixture, as long as the relative quantities of the other constituents are known.
Lead(II) iodide is a chemical compound with the formula PbI
2. At room temperature, it is a bright yellow odorless crystalline solid, that becomes orange and red when heated. It was formerly called plumbous iodide.
Silver chloride is a chemical compound with the chemical formula AgCl. This white crystalline solid is well known for its low solubility in water and its sensitivity to light. Upon illumination or heating, silver chloride converts to silver, which is signaled by grey to black or purplish coloration in some samples. AgCl occurs naturally as a mineral chlorargyrite.
Lead(II) chloride (PbCl2) is an inorganic compound which is a white solid under ambient conditions. It is poorly soluble in water. Lead(II) chloride is one of the most important lead-based reagents. It also occurs naturally in the form of the mineral cotunnite.
Classical qualitative inorganic analysis is a method of analytical chemistry which seeks to find the elemental composition of inorganic compounds. It is mainly focused on detecting ions in an aqueous solution, therefore materials in other forms may need to be brought to this state before using standard methods. The solution is then treated with various reagents to test for reactions characteristic of certain ions, which may cause color change, precipitation and other visible changes.
Potassium periodate is an inorganic salt with the molecular formula KIO4. It is composed of a potassium cation and a periodate anion and may also be regarded as the potassium salt of periodic acid. Note that the pronunciation is per-iodate, not period-ate.
Silver chromate is an inorganic compound with formula Ag2CrO4 which appears as distinctively coloured brown-red crystals. The compound is insoluble and its precipitation is indicative of the reaction between soluble chromate and silver precursor salts (commonly potassium/sodium chromate with silver nitrate). This reaction is important for two uses in the laboratory: in analytical chemistry it constitutes the basis for the Mohr method of argentometry, whereas in neuroscience it is used in the Golgi method of staining neurons for microscopy.
A nitrate test is a chemical test used to determine the presence of nitrate ion in solution. Testing for the presence of nitrate via wet chemistry is generally difficult compared with testing for other anions, as almost all nitrates are soluble in water. In contrast, many common ions give insoluble salts, e.g. halides precipitate with silver, and sulfate precipitate with barium.
Compounds of lead exist with lead in two main oxidation states: +2 and +4. The former is more common. Inorganic lead(IV) compounds are typically strong oxidants or exist only in highly acidic solutions.
Barium iodate is an inorganic chemical compound with the chemical formula Ba(IO3)2. It is a white, granular substance.
Ammonium iodate is an inorganic salt which is sparingly soluble in cold, and moderately soluble in hot water, like all iodate salts, it is a strong oxidizer.
Golden rain demonstration is made by combining two colorless solutions, potassium iodide solution and Lead(II) nitrate solution at room temperature to form yellow precipitate. During the chemical reaction, golden particles gently drop from the top of Erlenmeyer flask to the bottom, similar to watching the rain through a window. The golden rain chemical reaction demonstrates the formation of a solid precipitate. The golden rain experiment involves two soluble ionic compounds, potassium iodide (KI) and lead(II) nitrate (Pb(NO3)2). They are initially dissolved in separate water solutions, which are each colorless. When mixed, as the lead from one solution and the iodide from the other combine to form lead(II) iodide (PbI2), which is insoluble at low temperature and has a bright golden-yellow color. Although this is a reaction solely of the dissociated ions in solution, it is sometimes referred to as a double displacement reaction:
Radium compounds are compounds containing the element radium (Ra). Due to radium's radioactivity, not many compounds have been well characterized. Solid radium compounds are white as radium ions provide no specific coloring, but they gradually turn yellow and then dark over time due to self-radiolysis from radium's alpha decay. Insoluble radium compounds coprecipitate with all barium, most strontium, and most lead compounds.
{{cite book}}
: CS1 maint: location missing publisher (link) CS1 maint: others (link){{cite book}}
: CS1 maint: date and year (link)