Made in USA

Last updated

1926 Ford Model T hubcap made in USA Ford Hubcap Made in USA.jpg
1926 Ford Model T hubcap made in USA

A Made in USA mark is a country of origin label affixed to American-made products that indicates the product is "all or virtually all" domestically produced, manufactured and assembled in the United States of America. The label is regulated by the Federal Trade Commission (FTC). [1]

Contents

In general, goods imported into the United States must have a country of origin label unless excepted, but goods manufactured in the United States can be sold with no origin label unless explicitly required. U.S.-made goods that must bear an origin label include automobiles, textiles, wool, and fur products. Any voluntary claims about the amount of U.S. content in other products must comply with the FTC's Made in USA policy. [1]

A Made in USA claim can be expressed (for example, "American-made") or implied. In identifying implied claims, the Commission focuses on the overall impression of the advertising, label, or promotional material. Depending on the context, U.S. symbols or geographic references (for example, U.S. flags, outlines of U.S. maps, or references to U.S. locations of headquarters or factories) may convey a claim of U.S. origin either by themselves or in conjunction with other phrases or images. [1]

In May 1997, the FTC published its proposal that the requirement be stated as: [2]

It will not be considered a deceptive practice for a marketer to make an unqualified U.S. origin claim if, at the time it makes the claim, the marketer possesses and relies upon competent and reliable evidence that: (1) U.S. manufacturing costs constitute 75% of the manufacturing costs for the product; and (2) the product was last substantially transformed in the United States.

However, this was just a proposal and never became part of the final guidelines published in the Federal Register in 1997. [3]

Matchbox COLLECTIE TROPENMUSEUM Luciferdoos met propaganda-opschrift van de Japanners TMnr 3934-56b.jpg
Matchbox

Assembled in USA

A product that includes foreign components may be called "Assembled in USA" without qualification when its principal assembly takes place in the U.S. and the assembly is substantial. For the "assembly" claim to be valid, the product's "last substantial transformation" also should have occurred in the United States. A "screwdriver" assembly in the U.S. of foreign components into a final product at the end of the manufacturing process does not usually qualify for the "Assembled in USA" claim.[ citation needed ]

Regulation

Country of origin labels are required on textiles, wools, furs, automobiles, most foods, and many other imports.[ citation needed ]

Customs fraud

Examples of fraudulent practices involving imports include removing a required foreign origin label before the product is even delivered to the ultimate purchaser (with or without the improper substitution of a Made in USA label) and failing to label a product with the required country of origin.[ citation needed ]

Urban myth

A rumour spread that products made in a town named "Usa, Ōita" located in Ōita Prefecture, Japan and exported to the US in the 1960s carried the label MADE IN USA, JAPAN, to create the appearance that the product was made in the US. It is, however, a myth that Japan renamed the town "Usa" following World War II so that goods exported from Japan could be labeled as such. The town has existed from the 8th century (see Usa Jingū), predating the existence of the "United States of America" (first used in the 1776 United States Declaration of Independence) by more than a millennium, and is not a major manufacturing center; furthermore, the United States Customs Service would probably have recognized such labeling, had it occurred, as fraudulent and thus would have prohibited goods so labeled from being imported into the United States. [4]

Significance

Many manufacturers use the Made in the U.S.A. label as a selling point with varying degrees of success. This tag is associated with marketing and operational benefits, such as more appeal to certain buyers and lower shipping costs. When an American consumer sees a product is made in the U.S., the thinking goes, the consumer may perceive it as higher quality than a foreign-made version. [5] The decision where to produce is based on many factors, not simply direct product costs. Marketing and operations are both affected greatly by producing domestically.

Marketing significance

Many companies highlight the fact a product is made in the U.S. with their branding and marketing campaigns, benefitting from the huge marketing potential, often affecting the success of a product. Country of origin is a typical heuristic used when purchasing, [6] playing a significant role in consumer perception and evaluation since some consumers believe domestic products offer higher value and less risk. [5]

Automotive

For years American car brands have used this as a differentiating point. Supporting companies such as Ford was thought of as patriotic. Twenty-eight percent of Americans have said they would only buy American vehicles. [7] There was a large push from domestic automakers after foreign competition entered the market in the 1980s. Ford placed ads to all Americans highlighting that they made quality cars. [8] Chrysler also needed to reclaim market share from foreign competitors. They created commercials about American cars that were made by Americans with American parts. [9] In recent years, the trend has changed as Cars.com's 2016 American-Made Index for that year showed that many Hondas and Toyotas are among the top "American-made" automobiles. [10]

Apparel

Karlie Kloss showcases an Anna Sui dress at New York Fashion Week, Sui's collections have been designed and manufactured in New York's Garment Center since 1981. Karlie Kloss at Anna Sui 2011.jpg
Karlie Kloss showcases an Anna Sui dress at New York Fashion Week, Sui's collections have been designed and manufactured in New York's Garment Center since 1981.

Due to concerns about the exploitation of non-American workers in sweatshops, products bearing a Made in the USA label can appeal to American consumers seeking high-quality products produced domestically under American labor and environmental laws. Until it shut down brick and mortar stores in 2017, American Apparel, which had been producing in Los Angeles since 1989, was the largest garment manufacturer in North America. The company's CEO was committed to social responsibility, and offered factory workers careers with benefits and pay significantly higher than that of their overseas counterparts. When they shuttered, 2,400 employees were left unemployed. [11] After being purchased by Gildan Activewear, American Apparel returned as an online-only retailer with most of its apparel sourced from factories in Central America, primarily Honduras and Nicaragua. [12] [13] Los Angeles Apparel, the new manufacturer, designer and distributor led by Dov Charney, the former CEO of American Apparel, hired back 350[ citation needed ], 200 employees were hired by Broncs Inc., and Zack Hurley, CEO of Indie Source committed to hiring "at least a few dozen." [14] [11]

Food

After worker protests and bribery investigations, Walmart, the largest grocery store in the world, has pledged to source $50 billion in products from the US over the next ten years. [15] Companies such as Tropicana sold their orange juice as being 100% native to Florida. In the late 2000s decade, they started to mix oranges from Brazil, and Florida's Natural saw this as an opportunity to place "Made in the USA" on their cartons. After Tropicana returned to only using Florida oranges several years later, Florida's Natural updated their ads saying "All Florida. Never imported. Who can say that?" [16]

Operational significance

Companies that make products in the US also see benefits in their supply chain. Not all benefits are directly seen in cash flows immediately. Aspects like communication are simply improved, which may have effects that are not seen in the short run. The trend towards overseas factories has resulted in complications for companies of all sizes, ranging from quality to timeline issues.[ citation needed ]

Financial

Some direct costs are decreased as a result of using domestic factories. Shipping is simpler and faster when there is no need to deal with customs. US factories offer more flexible production runs, which can be appealing to new companies or new products. [17] These offer prices and quantities closer to what companies require. Research shows that reduced tariff rates are reflected immediately in lower clothing prices. [18] This suggests that the price of an imported good directly includes the tariff paid to import it. By producing in the US, this price increase is avoided.

Non-financial

Companies also benefit from non-direct cost ways of making in the US. The US has the most productive workforce. [19] Costs are higher for these factories but the workers are more effective than their abroad counterparts. China historically was a cheap place to manufacture. This led to the thriving apparel factories. As currency appreciates and wages rise, people are moving to low-cost areas in south-east Asia, and also coming back to the US. China's prices are rising and time to market is becoming increasingly important. [20] Communication is difficult as well for companies that produce in areas where another language is spoken. The general manager of a Haier plant in Camden, South Carolina Bernie Tymkiw has been quoted saying, “We just don't have the brainstorming ability because of language.” [21] The cultural disconnect can prove to be a significant barrier with global companies.

Supply chains are more agile using local suppliers. There is a greater control over orders. High-end designers like being very close to their factories, as they have full control of the product quality that is leaving the assembly line. This is necessary to keep their high standards. [17] One can visit their factory as often as necessary. This plays an important role in auditing the production process. An online article about the luxury apparel maker company Everlane led to over 2,000 shirts sales in a single day. [22] A shirt restock from China may have taken three months, whereas they were able to do it in under one month. [22] Being closer to the factory can aid in shipping costs and time.

Examples

A scented candle with a sticker that says "Made in the USA with 90% or more US parts" Mulled cider scented candle.jpg
A scented candle with a sticker that says "Made in the USA with 90% or more US parts"

According to the FTC, Made in USA means that “all or virtually all” the product has been made in the United States of America. The product should contain only negligible foreign content. [23] The FTC Enforcement Policy Statement on U.S. Origin Claims says there is no single "bright line" determining what "all or substantially all" means. [24] The minimum requirement is that the final assembly or processing of the product must take place within the United States. Examples are given on the FTC site; a barbecue grill made of components made in the US with the exception of the knobs may be called "Made in USA" while a garden tool with an imported motor may not.

Controversial use of label

Goods produced in American Samoa (a United States territory) are entitled to attach a "Made in USA" label, as this is an insular area of the United States. This area has until recently had few of the labor and safety regulations required of United States employers within the Contiguous United States, and there have been a number of cases of manufacturers using a labor force imported from South and East Asia. The Northern Mariana Islands is another U.S. territory in the Pacific that was exempted from certain U.S. wage and immigration laws until 2007, where the use of the "Made in USA" label was likewise controversial. The label is controversial also since all U.S. insular areas, except Puerto Rico, operate under a customs territory separate from the U.S., making their products technically imports when sold in the United States proper. [25] [26]

FTC enforcement

In March 2020, the FTC announced a settlement with Williams-Sonoma, Inc. over false advertising claims where Goldtouch Bakeware products, Rejuvenation-branded products, and Pottery Barn Teen and Pottery Barn Kids-branded upholstered furniture products were falsely advertised as Made in the USA. As part of the settlement with the FTC, Williams-Sonoma, Inc. agreed to stop making false, misleading, or unsubstantiated ‘Made in the USA’ claims and is required to pay $1 million to the FTC. [27] [28]

In June 2016, the FTC ordered Shinola Detroit to stop using "Where American is Made" as a slogan as "100% of the cost of materials used to make certain watches is attributable to imported materials." [29] Today, the Ronda movements are made in Bangkok, Thailand. The dials, hands, cases, crystals, and buckles are manufactured in Guangdong, China.

See also

Related Research Articles

A tariff is a tax imposed by the government of a country or by a supranational union on imports or exports of goods. Besides being a source of revenue for the government, import duties can also be a form of regulation of foreign trade and policy that taxes foreign products to encourage or safeguard domestic industry. Protective tariffs are among the most widely used instruments of protectionism, along with import quotas and export quotas and other non-tariff barriers to trade.

<span class="mw-page-title-main">Counterfeit</span> Making a copy or imitation which is represented as the original

To counterfeit means to imitate something authentic, with the intent to steal, destroy, or replace the original, for use in illegal transactions, or otherwise to deceive individuals into believing that the fake is of equal or greater value than the real thing. Counterfeit products are fakes or unauthorized replicas of the real product. Counterfeit products are often produced with the intent to take advantage of the superior value of the imitated product. The word counterfeit frequently describes both the forgeries of currency and documents as well as the imitations of items such as clothing, handbags, shoes, pharmaceuticals, automobile parts, unapproved aircraft parts, watches, electronics and electronic parts, software, works of art, toys, and movies.

<span class="mw-page-title-main">Non-tariff barriers to trade</span> Type of trade barriers

Non-tariff barriers to trade are trade barriers that restrict imports or exports of goods or services through mechanisms other than the simple imposition of tariffs. Such barriers are subject to controversy and debate, as they may comply with international rules on trade yet serve protectionist purposes.

<span class="mw-page-title-main">False advertising</span> Misleading content in advertisements

False advertising is the act of publishing, transmitting, or otherwise publicly circulating an advertisement containing a false claim, or statement, made intentionally to promote the sale of property, goods, or services. A false advertisement can be classified as deceptive if the advertiser deliberately misleads the consumer, rather than making an unintentional mistake. A number of governments use regulations to limit false advertising.

<span class="mw-page-title-main">Country of origin</span> Country of manufacture, production, or growth

Country of origin (CO) represents the country or countries of manufacture, production, design, or brand origin where an article or product comes from. For multinational brands, CO may include multiple countries within the value-creation process.

Tariffs have historically served a key role in the trade policy of the United States. Their purpose was to generate revenue for the federal government and to allow for import substitution industrialization by acting as a protective barrier around infant industries. They also aimed to reduce the trade deficit and the pressure of foreign competition. Tariffs were one of the pillars of the American System that allowed the rapid development and industrialization of the United States. The United States pursued a protectionist policy from the beginning of the 19th century until the middle of the 20th century. Between 1861 and 1933, they had one of the highest average tariff rates on manufactured imports in the world. However American agricultural and industrial goods were cheaper than rival products and the tariff had an impact primarily on wool products. After 1942 the U.S. began to promote worldwide free trade, but after the 2016 presidential election has gone back to protectionism.

<span class="mw-page-title-main">Voluntary export restraint</span>

A voluntary export restraint (VER) or voluntary export restriction is a measure by which the government or an industry in the importing country arranges with the government or the competing industry in the exporting country for a restriction on the volume of the latter's exports of one or more products.

<span class="mw-page-title-main">Passenger vehicles in the United States</span>

Since 2009, the United States is home to the second largest passenger vehicle market of any country in the world, second to China. Overall, there were an estimated 263.6 million registered vehicles in the United States in 2015, most of which were passenger vehicles. This number, along with the average age of vehicles, has increased steadily since 1960. The United States is also home to three large vehicle manufacturers: General Motors, Ford Motor Company, and Chrysler, which have historically been referred to as the "Big Three".

Multi-level marketing (MLM), also called network marketing or pyramid selling, is a controversial marketing strategy for the sale of products or services in which the revenue of the MLM company is derived from a non-salaried workforce selling the company's products or services, while the earnings of the participants are derived from a pyramid-shaped or binary compensation commission system.

Country of origin labeling (COOL) is a requirement signed into American law under Title X of the Farm Security and Rural Investment Act of 2002, codified at 7 U.S.C. § 1638a as Notice of country of origin. This law had required retailers to provide country-of-origin labeling for fresh beef, pork, and lamb. The program exempted processed meats. The United States Congress passed an expansion of the COOL requirements on September 29, 2008, to include more food items such as fresh fruits, nuts and vegetables. Regulations were implemented on August 1, 2008, August 31, 2008, and May 24, 2013. The 2016 Consolidated Appropriations Act is the latest amendment to the Agricultural Marketing Act of 1946. This act forms the basis of the current COOL requirements.

<span class="mw-page-title-main">Ausbuy</span> Earlier non-profit organization from Australia

The Australian Companies Institute (Ausbuy) was, until 2016, a non-profit, non-political organisation that encouraged Australians to support Australian-owned and Australian-made products and services. Their goal was to keep the jobs and profits in Australia and for the decisions to be made by Australians.

<span class="mw-page-title-main">Foreign-trade zones of the United States</span>

In the United States, a foreign-trade zone (FTZ) is a geographical area, in a United States Port of Entry, where commercial merchandise, both domestic and foreign, receives the same Customs treatment it would if it were outside the commerce of the United States. The purpose of such zones is to help American businesses to be competitive in the global economy by reducing tariff burdens on the importation of foreign inputs and on exported finished products. Another definition of an FTZ states that it is an isolated, enclosed and policed area operated as a public utility, furnished with facilities for loading, unloading, handling, storing, manipulating, manufacturing and exhibiting goods and for reshipping them by land, water or air. Merchandise of every description may be held in the zone without being subject to tariffs and other ad valorem taxes. This tariff and tax relief is designed to lower the costs of U.S.-based operations engaged in international trade and thereby create and retain the employment and capital investment opportunities that result from those operations.

Consumer protection is the practice of safeguarding buyers of goods and services, and the public, against unfair practices in the marketplace. Consumer protection measures are often established by law. Such laws are intended to prevent businesses from engaging in fraud or specified unfair practices to gain an advantage over competitors or to mislead consumers. They may also provide additional protection for the general public which may be impacted by a product even when they are not the direct purchaser or consumer of that product. For example, government regulations may require businesses to disclose detailed information about their products—particularly in areas where public health or safety is an issue, such as with food or automobiles.

Ugg boots trademark disputes are the disputes between some footwear manufacturers, as to whether "ugg" is a protected trademark, or a generic term and thus ineligible for trademark protection. In Australia and New Zealand, where "Ugg" is a generic term for the style of footwear, 702 registered trademarks include the term "Ugg" in various logos and designs. By contrast, UGG is a registered trademark of the California-based company Deckers Outdoor Corporation in over 130 countries worldwide, including the U.S., the European Union, and China.

The country-of-origin effect (COE), also known as the made-in image and the nationality bias, is a psychological effect describing how consumers' attitudes, perceptions and purchasing decisions are influenced by products' country of origin labeling, which may refer to where: a brand is based, a product is designed or manufactured, or other forms of value-creation aligned to a country. Since 1965, it has been extensively studied by researchers.

The Catfish Dispute started in 2001, as a trade war between Vietnam and the United States' catfish producers. The main argument concerns the import volume of catfish from Vietnam which results in lower profits for U.S. catfish producers. In dealing with major losses in profit, the Catfish Farmers of America (CFA), presented a series of lawsuits to the U.S. Department of Commerce against frozen catfish from Vietnam.

A destination-based cash flow tax (DBCFT) is a cashflow tax with a destination-based border-adjustment. Unlike traditional corporate income tax, firms are able to immediately expense all capital investment. This ensures that normal profit is out of the tax base and only super-normal profits are taxed. Additionally, the destination-based border-adjustment is the same as how the Value-Added Tax treat cross-border transactions—by exempting exports but taxing imports.

<span class="mw-page-title-main">Uyghur Forced Labor Prevention Act</span> United States sanctions law

The Uyghur Forced Labor Prevention Act is a United States federal law that changed U.S. policy on China's Xinjiang Uyghur Autonomous Region with the goal of ensuring that American entities are not funding forced labor among ethnic minorities in the region.

<span class="mw-page-title-main">Made in Canada</span> Product label certification mark

Made in Canada and Product of Canada are certification marks designating a claim that Canada is the country of origin of a good. A product label for that good may use these marks, or a qualified version, to present that claim to consumers. The certification marks are voluntary within Canada but may be required on exported goods, to comply with the laws of the country of export.

<span class="mw-page-title-main">Textile Fiber Products Identification Act</span> A consumer protection act in the United States.

Textile Fiber Products Identification Act is a consumer protection act in the United States. The act protects the interest of producers and consumers by imposing regulations of labelling and advertising of textile products. The act specifies labeling requirements and numerous guidelines for the advertising of textile products that should qualify the compliance in accordance with the directions in the act. The Federal Trade Commission considers any form of misbranding to be illegal. Moreover, it also requires that the commission provide a generic name for each man-made fibre, in particular for those not yet named. "Natural" and "manufactured" fibers were among two major groups classified by the act, which also maintains a list of generic names that is updated with each new entrant.

References

  1. 1 2 3 Levinson, Marc (May 5, 2017). The Meaning of "Made in U.S.A." (PDF). Washington, DC: Congressional Research Service. Retrieved October 24, 2017.
  2. ↑ "Examples Of Applications". Ftc.gov. June 24, 2011. Retrieved October 23, 2012.
  3. ↑ "Document" (PDF). Archived from the original (PDF) on September 26, 2012. Retrieved October 23, 2012.
  4. ↑ "Made in USA". snopes.com. July 8, 2011. Retrieved October 23, 2012.
  5. 1 2 Ha‐Brookshire, Jung; Yoon, So‐Hyang (September 7, 2012). "Country of origin factors influencing US consumers' perceived price for multinational products". Journal of Consumer Marketing. 29 (6): 445–454. doi:10.1108/07363761211259250.
  6. ↑ Cattin, Philippe; Jolibert, Alain; Lohnes, Colleen (September 1982). "A Cross-Cultural Study of 'Made in' Concepts". Journal of International Business Studies. 13 (3): 131–141. doi:10.1057/palgrave.jibs.8490564. S2CID   168131071.
  7. ↑ Miller, Daniel (October 28, 2016). "Detroit Automakers: The Truth About American-Made Vehicles -- The Motley Fool". The Motley Fool. Retrieved October 28, 2016.
  8. ↑ "History: 1980s". Adage. September 15, 2003. Retrieved November 28, 2016.
  9. ↑ Sottek, T. C. (September 19, 2014). "Car commercials from the 1980s were completely insane". The Verge. Retrieved November 28, 2016.
  10. ↑ "The 2016 Cars.com American-Made Index | News | Cars.com".
  11. 1 2 Li, Shan (January 16, 2017). "American Apparel starts mass layoffs as company winds down operations". Los Angeles Times . Archived from the original on August 7, 2019. Retrieved May 8, 2019. Broncs Inc., a Compton textile manufacturer, bought American Apparel's Garden Grove knitting and dyeing facility and will keep about 200 employees. Zack Hurley, chief executive of Indie Source, said he plans to hire at least a few dozen American Apparel workers for his contract manufacturing facility in downtown Los Angeles.
  12. ↑ Ibrahim, Noor (November 12, 2017). "The new American Apparel: claims of 'ethically made' abroad clash with reality". The Guardian. Archived from the original on September 17, 2019. Retrieved May 24, 2020. American Apparel then reopened as an online-only retailer, and by February, it swapped its "Made in USA" mantra with the phrase "Globally-Sourced," as most of its apparel is now sourced from factories based in Central America, primarily in Honduras.
  13. ↑ Bain, Marc (April 7, 2017). "American Apparel is making its first products outside America". qz.com. For the first time, however, products bearing the American Apparel name will have tags that read "Made in Honduras" and "Made in Nicaragua."
  14. ↑ Sauer, Abe (June 26, 2017). "American Apparel's Dov Charney Is Back With Los Angeles Apparel". Brandchannel. Archived from the original on June 27, 2018. Retrieved May 8, 2019.
  15. ↑ "Made in USA makes comeback as a marketing tool". USA TODAY. Retrieved October 26, 2016.
  16. ↑ Elliott, Stuart (February 15, 2012). "This Column Was 100% Made in America". The New York Times.
  17. 1 2 Rowan L. Made in America, maybe: The potential renaissance of domestic apparel manufacturing in the united states. Georgetown University; 2015.
  18. ↑ Zigmantavičienė, Aida; Snieška, Vytautas (January 30, 2006). "Methods of Measurement of Non-tariff Barriers in the International Textile Trade". Engineering Economics. 46 (1): 13–19.
  19. ↑ "MADE IN U.S.A. Is American competitiveness slipping?". Great Decisions: 63–72. 1981. JSTOR   43680988.
  20. ↑ Flannery, Russell (January 16, 2014). "Cambodia Factory Shootings Underscore Shifts, Openings In The Global Apparel Business". Forbes.
  21. ↑ Biers, Dan (March 29, 2001). "A taste of China in Camden". Far Eastern Economic Review. 164 (12): 54. ProQuest   208230365.
  22. 1 2 Wang J. American beauty there's a rebound in domestic production. Entrepreneur. 2012:70-71.[ verification needed ]
  23. ↑ "Made in USA - Federal Trade Commission". ftc.gov. May 24, 2020. Retrieved May 24, 2020. Made in USA means that "all or virtually all" the product has been made in America. That is, all significant parts, processing, and labor that go into the product must be of U.S. origin. Products should not contain any – or should contain only negligible – foreign content.
  24. ↑ "Enforcement Policy Statement on U.S. Origin Claims - Federal Trade Commission". ftc.gov. Federal Trade Commission. December 1, 1997. Archived from the original on April 12, 2020. Retrieved May 25, 2020. A product that is all or virtually all made in the United States will ordinarily be one in which all significant parts and processing that go into the product are of U.S. origin.
  25. ↑ "Commonwealth of the Northern Mariana Islands: Implementation of Federal Minimum Wage and Immigration Laws". U.S. Government Accountability Office. May 18, 2017.
  26. ↑ "U.S. Immigration Law in the Commonwealth of the Northern Mariana Islands (CNMI)". USCIS. Retrieved October 16, 2018.
  27. ↑ Kreidler, Jim (April 1, 2020). "Williams-Sonoma: Made in the USA?". Federal Trade Commission. Archived from the original on April 4, 2020. Retrieved May 23, 2020.
  28. ↑ Joseph J. Simons, Chairman. "Complaint" (PDF). ftc.gov. Federal Trade Commission. Archived (PDF) from the original on April 4, 2020. Retrieved May 23, 2020. The acts and practices of Respondent as alleged in this complaint constitute unfair or deceptive acts or practices in or affecting commerce in violation of Section 5(a) of the Federal Trade Commission Act.
  29. ↑ Manousos, Nicholas (June 17, 2016). "Breaking News: FTC Takes Action Against Shinola, Suggests 'Where American Is Made' Slogan Be Dropped". Hodinkee.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.