EN77 [1] [2] | |
---|---|
Stock type | electric multiple unit |
Manufacturer | Pesa |
Assembly | Bydgoszcz, Poland |
Capacity | 350 |
Specifications | |
Train length | 75,250 mm (246.88 ft) |
Width | 2,880 mm (9.45 ft) |
Height | 4,280 mm (14.04 ft) |
Platform height | 760 mm (2.49 ft) |
Maximum speed | 160 km/h (99 mph) |
Engine type | asynchronous |
Power output | 3,000 V DC |
Acceleration | 1 m/s2 (3.3 ft/s2) |
Pesa Acatus II (type 32WE designated as EN77) is a four-car, partially low-floor, standard-gauge electric multiple unit of Polish production, manufactured by Pesa at the turn of 2010 and 2011. Five units were purchased by the local government of the Lesser Poland Voivodeship. Initially, the vehicles were operated by Przewozy Regionalne, and later by Koleje Małopolskie, which have additionally owned the vehicles since 2018.
After World War II, electric multiple units (EMUs) were produced until 1997 only by Pafawag from Wrocław. [3] Pafawag was the manufacturer of, among others, the most popular EMU series in Poland, EN57. [4] After privatization in the 1990s, Pafawag ceased the production of such vehicles, with the last unit being ED73 in 1997. For several years, no EMUs were produced in Poland. [4]
During this period, Polish State Railways, and later local governments, mainly purchased diesel multiple units (DMUs), as fuel-intensive locomotives dominated the operation of non-electrified lines. This allowed Polish manufacturers and operators to gain experience in the production and operation of lightweight rolling stock. [5] Additionally, the existing EN57 units were modernized by Polish operators. [6]
New manufacturers' electric multiple units began appearing on Polish tracks in 2004. Since then, three manufacturers have won tenders for the supply of EMUs: Pesa Bydgoszcz (formerly ZNTK Bydgoszcz), Newag (formerly ZNTK Nowy Sącz), and Stadler Rail. [7] After a major restructuring in 1998, Pesa initially (from 2001) focused on producing railbuses. However, in 2004, it embarked on building the first EMUs for the Warsaw Commuter Railway – the 13WE (EN95). Despite plans to purchase 10 units, [8] production ended after one unit. The next EMUs produced were the 15WE (2006) and the 16WEk (2007). In both cases, production ended after one order. One of the reasons for the failure was the high floor (1,000 mm above the railhead), [9] which hindered quick passenger exchange and the increasingly popular transport of bicycles, strollers, and wheelchairs. [6] In Poland (outside the Warsaw metropolitan area and the Tri-City metropolitan area ), high platforms were virtually nonexistent and there were no plans to build them, so the introduction of low-floor EMUs became important for those ordering new rolling stock. [10] [11] [12] Pesa Bydgoszcz took this into account when designing the Elf and Acatus II, which are adapted for step-free access to platforms 550/760 mm above the railhead. [1] [13]
In 2014, Pesa announced that after a 3-year break (the EN77-005 was delivered in the second quarter of 2011), [14] it intended to develop the Acatus II line by selling Acatus Plus units. Orders for these vehicles were placed by the local governments of the Lesser Poland and Subcarpathian voivodeships. [15]
The Acatus II is a four-car, single-space, partially low-floor train designed for regional passenger transport. Despite its name, it has little connection to the first Acatus. [2]
The middle cars have two pairs of doors on each side, while the end cars have one pair each. All doors are located in the low-floor area, with retractable steps installed underneath to facilitate boarding from platforms lower than 550/760 mm above the railhead. The first and last bogie is a powered 26MN with an axle base of 2,800 mm. The middle bogies are Jacobs 40AN trailer bogies with an axle base of 3,000 mm. Elevated floor areas, accessible by steps or ramps, are located above all bogies. The wheel diameter is 850 mm. [2] Due to the way the cars are connected, shortening or lengthening the vehicle in operational conditions is not possible, but it is possible to couple up to three units in multiple unit operation.
The seating arrangement is mixed: rows and groups. The vehicle has 160+13 seats in second class and 20 in first class. [2] The passenger area includes two closed-system toilets and a space for passengers with limited mobility, large luggage, or bicycles, near which there are lifts for the disabled. [2]
The Acatus II is equipped with a driver's assistant seat, [1] allowing them to exceed speeds of 130 km/h in normal operation, which requires a two-person crew. Visibility from the cab is good, except for a blind spot right in front of the vehicle. This requires special attention when starting at low platforms and at level crossings. [2]
This train is a more basic version of the Elf family of vehicles. Among the technical differences, it does not meet the crashworthiness standard PN-EN-15227 (the structural strength itself is identical to that of the elves – P II according to the PN-EN-12663-1 standard), [1] [13] lacks tread cleaning blocks, and flange lubrication is reduced to only the external axles of the powered bogie (both in the elf). [1]
In 2016, the units were sent for periodic repairs, during which they received new paintwork. [16]
In 2021, at the Pesa Mińsk Mazowiecki plant, level P4 repairs of the Acatus units began, combined with modernization including, among other things, the replacement of brake discs and monoblock wheels, installation of a passenger information system, passenger counting system, Wi-Fi transmitters, bike racks, a new internal and external monitoring system, and replacement of seat upholstery, installation. [17] [18]
On 28 January 2010, a contract was signed for the delivery of 5 new Acatus II type electric multiple units with the local government of the Lesser Poland Voivodeship. [19] The purchase of the rolling stock was financed with European Union funds under the Lesser Poland Regional Operational Programme for 2007–2013. [2]
On 28 January 2011, the first two trains were delivered to Kraków and made their maiden journey in the livery of Przewozy Regionalne to Tarnów and Krynica via Nowy Sącz. [2] The next two sets were delivered on March 29. [20] The last, fifth Acatus II, was delivered in the second quarter of 2011. [14]
In the autumn of 2012, an issue of excessive wear of the wheelsets emerged. In September, one set was taken out of service due to the critical wear of the wheelsets. In December, 3 more sets were withdrawn, with the last one withdrawn in May 2013. All vehicles had traveled from 70 to 80 thousand km, even though they were supposed to cover 100 thousand km according to the contract. As a result, Przewozy Regionalne demanded repairs at the manufacturer's expense. After repairing and returning the first 2 sets, Pesa retained the third repaired set and issued an invoice for the repair of all 3 sets. According to Pesa, the reason for the rapid wear of the wheels in the EN77 is the poor state of infrastructure in the Lesser Poland Voivodeship, [21] although the manufacturer was aware of the condition of the railway lines. [22]
On 12 December 2015, the lease agreement for the units by Przewozy Regionalne ended. On December 13, the units were leased to Koleje Małopolskie. [23] The reason for the change in the operator was the transfer of the operation of the Kraków Główny–Sędziszów line from Przewozy Regionalne to Koleje Małopolskie. [24] [25]
In 2017, EN77-001, 002, and 005 were temporarily transferred to Przewozy Regionalne. [26] [27] [28] [29]
On 24 September 2018, the Marshal's Office adopted a resolution to contribute all EN77 EMUs as a non-monetary contribution to Koleje Małopolskie. [30]
In May 2011, a competition was announced to name the trains, [31] resulting in names being assigned to the trains on September 27. [32] Each name refers to one of the subregions of Lesser Poland. [33]
Designation | Name | Subregion |
---|---|---|
EN77-001 | Peacock Feather | Kraków |
EN77-002 | Swallow | Tarnów |
EN77-003 | Jurassic | Western Lesser Poland |
EN77-004 | Nikifor | Nowy Sącz |
EN77-005 | Tischner | Podhale |
Individual trains are not permanently assigned to their "own" subregions. For example, EN77-003 Jurassic operates some connections to Zakopane. [34]
From June 1 to November 5, 2012, a train Interregio Nikifor ran from Krynica to Warsaw. However, this route was not operated by EN77-004 with the same name but by trains of a different type. The shared name sometimes caused confusion. [35] [36]
Koleje Dolnośląskie is a regional rail operator in the Lower Silesian Voivodeship of Poland.
The Elf is an electric multiple unit developed by Polish rolling-stock manufacturer Pesa SA. It is intended for commuter and regional service where platform height is 55 cm (22 in). It is based on earlier EMU designs named ED59 and ED74. A Pesa Elf was exhibited at InnoTrans 2010.
Newag 220M/221M is a series of diesel multiple units, they are two and three-section passenger trains which have been manufactured since 2010. They are designed for suburban and long-distance passenger transit. They are low-floor, open-coach units produced by Newag in Nowy Sącz in Poland. Altogether 9 units have been produced which are operated by Przewozy Regionalne and Silesian Railways.
Düwag Wadloper is a family of diesel railcars and diesel multiple units produced by the German Düwag plant in Düsseldorf. Between 1981 and 1983, a total of 50 vehicles of this kind were built specifically for the Dutch Nederlandse Spoorwegen railroad. At the beginning of the 21st century, they were mainly operated by private carriers; in 2006 they began to be phased out, and in 2008 they were sold to other countries. The trains went to carriers from Poland, Argentina and Romania. They were operated by Przewozy Regionalne, Masovian Railways and Koleje Śląskie, and also used by Trenes de Buenos Aires to operate a cross-border service between Argentina and Uruguay. They currently operate services connecting Argentina with Paraguay, and are operated in Poland by SKPL Cargo, as well as on several lines in Romania.
Pesa Acatus is a standard-gauge electric multiple unit produced in a single copy at the Pesa plant in Bydgoszcz in 2006, specifically for the Marshal's Office of the Łódź Voivodeship. During test runs, it was a four-car unit, and it is nowadays operated in a three-car configuration.
The Dart is a long distance electric multiple unit developed by Polish rolling-stock manufacturer Pesa SA. PKP Intercity operates 20 Dart units, which are designated as PKP Class ED161.
Pesa Bydgostia is a four-car standard-gauge electric multiple unit of Polish production, manufactured by Pesa Bydgoszcz upon order from Przewozy Regionalne, with a total of 14 units produced. In December 2008, they were transferred to PKP Intercity. The train set is a developmental version of the Pesa Acatus train.
Pesa 401M is a control car used as a trailer for Pesa 214M railbuses of the SA106 series. This wagon was built by Pesa for the Marshal's Office of the Kuyavian–Pomeranian Voivodeship, with a total of 5 units produced.
Pesa Mazovia is a standard-gauge, four-car electric multiple unit produced in 2004 by Pesa from Bydgoszcz in a single unit for the Warsaw Commuter Railway. It is the first vehicle of this kind built by the manufacturer.
Newag 19WE is a standard-gauge, four-car electric multiple unit (EMU) produced between 2008 and 2010 at the Newag plant in Nowy Sącz. A total of 4 units were built, which are operated by Szybka Kolej Miejska in Warsaw.
The Pesa 214M is a family of standard-gauge diesel railcars produced by Pesa Bydgoszcz between 2001 and 2016, intended for regional transport on non-electrified lines. The family includes: 214M (SA106), 214Ma (SA103), and 214Mb (SA135). A total of 56 units were produced, which are operated by Arriva, Koleje Dolnośląskie, Masovian Railways, and Polregio.
Pesa 218M is a family of two-car standard-gauge diesel multiple units (DMUs) produced by Pesa between 2005 and 2015. Only one single-engine unit of the original 218M model was built, while the remaining dual-engine units were designated as subtypes 218Ma-218Md. A total of 76 units were produced, which are operated by Arriva, Koleje Dolnośląskie, Koleje Wielkopolskie, Polregio, and Szybka Kolej Miejska in Tricity.
Pesa 620M is a broad-gauge diesel railcar produced since 2004 by Pesa for the Lithuanian Railways and Ukrainian Railways, and since 2011, in cooperation with Belkommunmash, also for the Belarusian Railway. A total of 29 units were produced.
Pesa 33WE is a standard-gauge, low-platform electric multiple unit produced by Pesa in Bydgoszcz in a quantity of 14 units for the Warsaw Commuter Railway. They replaced the EN94 series trains.
Moderus Beta are trams resulting from the modernization of German Stadtbahnwagen M/N cars, produced by the company Modertrans Poznań. Between 2009 and 2015, a total of 65 of these trams were modernized, and they operate in Gdańsk and Elbląg.
Newag 222M is a two-car diesel multiple unit produced by the Newag company from Nowy Sącz. Two units were manufactured for Masovian Railways, and four more for the Subcarpathian Voivodeship.
Pesa Tramicus is a uni-directional low-floor tram produced by Pesa in Bydgoszcz. The tram is available in three versions: a three-section (121N) or five-section configuration, with sections connected by accordion-type pivot joints. Between 2005 and 2008, a total of 33 Tramicus trams were produced, and they were delivered to Warsaw, Łódź, Elbląg, and Bydgoszcz. The experience gained from designing and operating the Tramicus family led to the development of the Swing vehicles.
EN81 is an electric motor coach produced by the Pesa plant in Bydgoszcz in 2005 and 2007. A total of 8 units were built, currently operated by Polregio in the Świętokrzyskie Voivodeship, and previously also in the Lesser Poland Voivodeship. The EN81 is intended for use on electrified regional routes to service routes with a small number of passengers, where operating multi-car electric multiple units would be uneconomical.
Pesa 630M is a two-car, broad-gauge diesel multiple unit produced by Pesa. Six units are currently in service, operated by Ukrainian Railways, Kazakhstan Temir Joly, and Lithuanian Railways.
Pesa 610M is a broad-gauge diesel inspection railcar produced by Pesa for Ukrainian Railways. It is a developmental version of the single-unit diesel rail vehicle Partner. Only one unit was built, delivered in 2004.