The Port of Immingham, also known as Immingham Dock, is a major port on the east coast of England, located on the south bank of the Humber Estuary in the town of Immingham, Lincolnshire. In 2019, the Port of Grimsby & Immingham was the largest port in the United Kingdom by tonnage with 54.1 million tonnes of cargo passing through that year.[2]
The port was established by the Humber Commercial Railway and Dock Company in association with the Great Central Railway; the dock company incorporated and the works permitted by the Humber Commercial Railway and Dock Act 1901 (1 Edw. 7. c. ccii). Construction of the dock started in 1906 and was completed by 1912. The original main purpose of the dock was export of coal.
In the second half of the 20th century the port was considerably expanded beyond its locked dock, and east and west jetties; with the addition of several deep water jetties for bulk cargos: this included the Immingham Oil Terminal (1969, expanded 1994) for oil importation to the new Continental Oil and Lindsay Oil refineries; the Immingham Bulk Terminal (1970) built as a joint scheme by the National Coal Board and British Steel Corporation for coal export and iron ore import; the Immingham Gas Jetty (1985) for LPG import; and the Humber International Terminal (2000, expanded 2006) for bulk cargos. Roll-on/Roll-off terminals were first operated in 1966, and expanded within the dock in the 1990s, and outside the dock at the Immingham Outer Harbour (2006).
In 1874 a report was commissioned from Charles Liddell on alternatives to expansion at Grimsby – it recommended a new dock west of Grimsby at South Killingholme, preferable due to low land costs and proximity to the Humber Estuary's navigable channel. Liddel's scheme was not proceeded with at that time.[3][4]
In 1900 the Humber Commercial Railway and Dock Company was formed with the aim of expanding the Grimsby Docks system – it sought powers from Parliament to build a new dock west adjacent of the Royal Dock, and north of Alexandra Dock, on the banks of the Humber;[5] this development was passed as the Humber Commercial Railway and Dock Act 1901 (1 Edw. 7. c. ccii).[6] The Great Central Railway (GCR), owner of the Grimsby Docks was willing to back the scheme, but sought the advice of Sir John Wolfe Barry, who reported that the approach channel to the dock would have required extensive dredging; he later reported in favour of a scheme near Immingham, similar in location to that earlier proposed by Liddel.[7][4] The GCR acquired land near their preferred dock, and informed the promoters of the scheme it was to withdraw its support, unless the scheme was changed to one better positioned on the Humber, near Stallingborough, nearer to a deep water channel;[4][7]
Plans were submitted to Parliament in 1902 for a dock near Immingham,[8] but the bill was withdrawn due to conditions requiring the GCR to dredge the Humber shipping channels to undo any change thought to have been caused by the dock works.[9] Under pressure from interested parties the Board of Trade commissioned an inspection of the channels, which reported that no serious negative change would be expected from the new dock works.[9] A bill was re-submitted in 1903. Features of the scheme were: a new dock in the parish of Immingham with lock and entrance channel, with jetties on the east and west side; a railway with a junction north of the Great Central Railway's line at Ulceby station to the dock; and rights to dredge, divert streams (Immingham Haven), to raise funds, to make working arrangements with the Great Central Railway; and rights of compulsory purchase. The scheme was passed as the Humber Commercial Railway and Dock Act 1904 (4 Edw. 7. c. lxxxv).[8][10][11] The 1904 act was modified by subsequent acts in 1908 (8 Edw. 7. c. xlix), 1909 (9 Edw. 7. c. lxxxv), and 1913 (3 & 4 Geo. 5. c. xx), which extended the time for construction, allowed raising additional capital, and made minor changes to the original plans.[12][13][14] The primary purpose of the dock was export of coal from Derbyshire and Yorkshire coalfields.[15]
Construction and opening, 1906–1912
Immingham Dock and rail lines, c.1912
The dock was designed by the firm of Sir John Wolfe Barry and partners, and contracted to Price, Wills and Reeves (Westminster), constructed on a site of over 1,000 acres (400ha), with a river frontage of about 1.5 miles (2.4km).[16] Work was formally initiated on the dock by Lady Henderson, wife of the Great Central chairman Alexander Henderson in July 1906.[16][17]
Three new short railway lines were sanctioned and constructed to connect to the dock from the west, east and south: these were the Humber Commercial Railway with a connection 5 miles (8km) away at Ulceby,[map 1] on the former Great Grimsby and Sheffield Junction Railway (GG&SJR); the Barton and Immingham Light Railway ran from a junction near Goxhill (GG&SJR) connecting to the Humber Commercial line at a junction on the west side of the dock estate;[map 2] and the Grimsby District Light Railway to Grimsby connecting via a junction onto the Humber Commercial line,[map 3] on the east side of the dock estate.[16][18] The light railway to Grimsby was connected to the Great Coates branch by 1906; the line was used during the construction of the dock by the contractors, and a passenger service was begun in 1910.[19]
Initial work on the dock included diversion of drains, and dredging of the entrance channel to the Humber. Approximately 2,500,000 cubic yards (1,900,000m3) of excavated material from the dock was used in the construction for levelling. The dock walls were made of concrete, with granite coping;[20] the lock pit was constructed with concrete side walls and a shallow inverted arch of brickwork at the invert.[21] Installation of the lock gates and their machinery was by Head Wrightson.[22]
As built (1912) the dock consisted of a main basin 1,100 feet (340m) square,[map 4] with two arms to the north-west and south-west of approximately 1,250 by 375 feet (381 by 114m) long by wide; a total enclosed area of 55.5 acres (22.5ha). The design incorporated space for two further arms on the east side, mirroring the western arms. The entrance lock was 840 by 90 feet (256 by 27m) split by lock gates into sections of 320 and 540 feet (98 and 165m);[map 5] the lock had 28 feet (8.5m) of water depth at ordinary spring tides. At the entrance where two jetties extending 650 feet (200m) into the river, forming a guiding shape for the lock entrance – the eastern jetty was intended to be used for passenger services,[map 6] whilst the western jetty found initial use as a coal loading point.[23][note 1][map 7]
The first dry dock was constructed adjacent parallel west of the entrance lock 740 by 56 feet (226 by 17m) long by wide,[25][26][map 8] operated by Humber Commercial Railway and Dock Co. subsidiary the Humber Graving Dock & Engineering Co.[27] East of the entrance lock was constructed the Dock Offices, built in an Arts and Crafts influenced style, with a Mansard roof encompassing dormer windows.[28][map 9]
Coal hoists on the south quay c.1912
The south quay of the dock was entirely equipped for coal export, with seven coal hoists, with capacity of 400 tons per hour. Extensive sidings were built mainly to the south of the dock, with inbound storage available for 8,000 (loaded) coal wagons, and outbound storage for 3,500 wagons.[25] The north-western arm was initially built as a timber pond, with adjacent rail sidings.[25] Coal hoists were hydraulically powered, supplied by gravity sidings carried across sidings by ferro-concrete bridges built by the Yorkshire Hennebique Contracting Company (Leeds). Six of the hoists were supplied by W.G. Armstrong Whitworth and Company; the seventh, a movable hoist was supplied by Tannet, Walker and Company (Leeds).[29] The north quay of the south-western arm was used for pig iron handling, and was equipped with ten movable cranes from Armstrong Whitworth of lifting capacity of 5 or 3 tons, and a fixed crane with lifting capacity of up to 50 tons.[30] Further cranes from Cowans, Sheldon & Company (Carlisle) were supplied for the transit sheds.[31]
The hydraulic and electrical powerstation c.1912
Much of the dock equipment was power via hydraulic power, whilst electrical power transmission was used for lighting, railway signalling, pumping equipment for the graving dock, and other purposes, including conveyor motors in the grain silo.[32] For both purposes a power station, 188.5 by 104.5 feet (57.5 by 31.9m) in ground plan was erected on the dock estate west of the main lock entrance.[map 10] Steam was supplied by eight 30 by 8.5 feet (9.1 by 2.6m) long by wide Lancashire boilers at 180 pounds per square inch (1,200kPa) – both hydraulic pumping and electrical generator plant was supplied by the same boilers, connected on a ring steam main. Hydraulic power was supplied via four pairs of horizontal condensing steam engines, with cylinder diameters of 24 and 44 inches (610 and 1,120mm) with 36 inches (910mm) stroke, each capable of pumping 700 imperial gallons (3,200L; 840USgal) per minute at 800 pounds per square inch (5,500kPa) to two 36 feet (11m) stroke accumulators. Most of the hydraulic machinery was supplied by W.G. Armstrong Whitworth and Company.[33] Electrical power was provided via Curtis type steam turbines-alternatos of 250 kilowatts (340hp) (two machines), 500 kilowatts (670hp), and 1,500 kilowatts (2,000hp); supplying 6,000V which was stepped down to 320V to drive rotary converters; distribution of power was via a 3-phase 6,600V supply to substations on the dock estate, containing rotary converters supplying 460VDC. The electrical network included a substation halfway between Grimsby and Immingham supplying the Grimsby District Light Railway with 530VDC; as well as a 1,200kW 460V supply via overhead electrical cable to the Grimsby Docks. Most of the electrical equipment was supplied by British Thomson-Houston.[34]
Due to high demand for coal shipment facilities in the aftermath of a coal strike, the dock was provisionally opened on 15 May 1912.[40] The dock was official opened on 22 July 1912 by the King George V and Queen Mary;[41] at the ceremony permission was given to name the new dock "The King's Dock", a moniker which did not persist; Sam Fay, general manager of the GCR was unexpectedly knighted by the King during the proceedings.[42]
Shortly after opening a large reinforced concrete grain silo was completed (1913), capable of holding 20,000 tons of grain. The silo was built by Stuart's Granolithic Company, and grain handling equipment supplied by Henry Simon (Manchester).[43][map 12]
During the Second World War the port was used as a naval base, and was the Royal Navy's headquarters for the Humber.[45] Anti-aircraft batteries were located around the dock during the war.[46][47]
During the war John Dowland and Leonard Harrison received the George Cross for defusing a bomb that had fallen onto the grain ship SS Kildare in February 1940 in Immingham Dock.[44]
In 1950 a fertilizer plant was established on the dock estate, to the southeast.[map 13] (See Fisons, Immingham.)
In 1957 construction of a new dry dock was begun, after acquisition of the Humber Gracing Dock & Engineering company by Richardsons Westgarth & Company; the new dry dock opened 1960,[27][map 14] known as Henderson's Graving Dock.[48]
The Immingham Oil Terminal (IOT) jetty on the banks of the Humber east of the dock entrance was opened 1969.[49][map 15] The terminal was built to serve the new oil refineries (Continental Oil Refinery and Lindsey Oil Refinery) built near west of the Immingham Dock site. The initial construction consisted of a pier into the Humber with two berths, suitable for ships up to 200,000 dwt. The dolphin berths were constructed from 71 inches (1,800mm) diameter tubes with 1.3-inch (32mm) wall thickness driven over 60 feet (18m) into the underlying ground, in groups of 3 to 6 tubes.[50]
Immingham Bulk Terminal was commissioned in 1970 jointly by the National Coal Board (NCB) and British Steel Corporation (BSC) in association with the British Transport Docks Board (BTDB) for the export of coal and import of steel.[49][51][map 16] The cost of the terminal was £11.5million.[52] The coal terminal was designed to increase the efficiency of coal export by the NCB,[53] the terminal was taken over by the BTDB in 1973,[54] and leased back to the NCB and BSC, it was the NCB's main point of export for coal (1982).[55] The ore terminal was part of British Steel's "Anchor" modernisation project at its Scunthorpe Steelworks,[56] the ore terminal was completed 1972.[57] Vessel capacities for the terminals were 100,000 dwt for the ore terminal and 35,000 dwt for the coal terminal.[58]
A Liquid Petroleum Gas handling jetty "Immingham Gas Jetty" was opened in 1985 at a cost of £5million;[map 17] the terminal was connected to underground storage operated by Conoco and Calor Gas.[59]
A third berth was commissioned at the Immingham oil terminal in 1994 at a cost of £18million.[49][60]
In June 1995 a new £13.5million terminal was opened for shipping company DFDS. Located on the south-western arm of the dock, in 1999 the terminal had 4 roll-on/roll-off berths on a 50 acres (20ha) site.[61][62]
The shipyard at the graving docks closed in 2001. The Henderson Graving Dock has been converted into a shipping berth.[48]
Humber International Terminal (HIT) became operational in August 2000. The terminal was built adjacent west of the Immingham Bulk Terminal on the Humber bank; a 300 metres (980ft) berth dredged to a depth of 14.7 metres (48ft). The main work was contracted to Edmund Nuttall and HAM Dredging.[map 18][63] In 2005 Associated British Ports decided to invest a further £15million on a "Phase 2" extension of the terminal.[64] The phase two berth extended the terminal's quay by 220 metres (720ft), and was built primarily to handle imported coal. The terminal was formally opened by the Princess Royal in 2006.[65]
A new Immingham West Jetty for petrochemical handling was contracted to Edmund Nuttall to a design by engineering firm Halcrow.[66]
In 2004 transport minister David Jamieson allowed the construction of a £35million, 5berth roll-on/roll-off terminals at the port, for ferry operators DFDS Tor Line, suitable for vessels up to 225 by 35 metres (738 by 115ft).[67][68] The Immingham Outer Harbour Revision Order, 2004 permitted the construction of moorings and access ramps south and west of the jetty of the Humber International Terminal; and the removal of part of the Western jetty; as well as permitting dredging of a channel to the terminal to a maximum depth of 9 to 10 metres (30 to 33ft).[69][70] Three of the five permitted berths were constructed, and the Immingham Outer Harbour opened 2006.[49][71][map 19]
In 2007/8, a £45million 200,000 ton (227,000 cubic metres (8,000,000cuft)) pa biofuel plant was constructed at the Port of Immingham, manufacturing biodiesel from vegetable oils.[72][73]
In 2008 a 48 acres (19ha) site was acquired in Stallingborough in 2008 to increase off dock estate storage space for cars. The site was operational by 2011.[71]
In 2013 ABP began the development of the "Immingham Renewable Fuels Terminal" on the Humber International Terminal site, as part of a 15-year contract with Drax Power Station to supply biomass (wood pellet) to the powerplant. ABP's total investment in biomass handling facilities, including installations at Hull and Goole was to be around £100million.[74][note 2] In April 2013 Graham Construction was awarded the contract to build the 3million ton per annum facility, consisting of an automated biomass handling terminal utilizing continuous ship unloaders, with rail and road export facilities, and with 100,000 ton storage capacity, using four silos each of 168,000 cubic metres (5,900,000cuft).[75][76] The project entered the commissioning phase in mid 2014.[77] The second phase of the project was to add a further 3million tons pa capacity.[78] Two 2,300 ton per hour screw unloading biomass handling cranes were installed by May 2015.[79]
In 2018 Associated British Ports took over operation of British Steel's Immingham Bulk Terminal with an investment of £65 million.[80] At the same time Derbyshire based metal and recycling specialist, Ward, opened a deep sea dock export facility at Immingham to expand its capabilities to export metal.[81]British Steel took back control of the Immingham port facility in 2020.[82]
The Dock Offices (2007)
Immingham Dock (2008)
Immingham Oil Terminal (2008)
Immingham Bulk Terminal (2007)
West Jetty (2007)
Seafarers Welfare
The port has a seafarers centre where chaplains from the Catholic seafarers charity Apostleship of the Sea are based.
↑ A double deck steel bridge of 600ft in six 100 feet (30m) spans was supplied by Head Wrightson to connect the west jetty to the rail network – the upper and lower decks held gravity fed rail tracks for full and returning empty wagons.[24]
1 Edw. 7. c. ccii (1901), Humber Commercial Railway and Dock Act 1901{{citation}}: CS1 maint: numeric names: authors list (link), Act for a new dock in Grimsby.[5]
4 Edw. 7. c. lxxxv (1904), Humber Commercial Railway and Dock Act 1904{{citation}}: CS1 maint: numeric names: authors list (link), a proposed dock to be sited instead at a site in Immingham.[10]
8 Edw. 7. c. xlix (1908), Humber Commercial Railway and Dock Act 1908{{citation}}: CS1 maint: numeric names: authors list (link), modifications of the 1904 act.[83]
9 Edw. 7. c. lxxxv (1909), Great Central Railway (Various Powers) Act 1909{{citation}}: CS1 maint: numeric names: authors list (link), clarification, additional capital.[84]
3 & 4 Geo. 5. c. xx (1913), Humber Commercial Railway and Dock Act 1913{{citation}}: CS1 maint: numeric names: authors list (link),[85]
Immingham is a town and civil parish in North East Lincolnshire, in Lincolnshire, England. It is situated on the south-west bank of the Humber Estuary, and is six miles northwest of Grimsby.
South Killingholme is a village and civil parish in North Lincolnshire, England. The population of the civil parish at the 2011 census was 1,108.
The Barton line is a railway line in North and North East Lincolnshire, England. It runs from Barton-upon-Humber south east to Cleethorpes and was designated by the Department for Transport as a community rail line in February 2007. Barton station is near to the Humber Bridge. It is situated on the south bank of the Humber Estuary.
The Grimsby District Light Railway (GDLR) was one of three standard gauge railways, all part of the Great Central Railway, promoted by the latter to connect the wider world to Immingham Dock which it built in the early Twentieth Century on an almost uninhabited, greenfield site on the south bank of the Humber, England.
The Grimsby & Immingham Electric Railway (G&IER) was an electric light railway, primarily for passenger traffic, linking Great Grimsby with the Port of Immingham in Lincolnshire, England. The line was built by the Great Central Railway (GCR), was absorbed by the London & North Eastern Railway (LNER) in 1923, and became part of the Eastern Region of British Railways. It ran mainly on reserved track.
Immingham engine shed, also known as Immingham depot, or more recently as Immingham TMD and always locally as Loco is a railway maintenance depot located on the Immingham Dock estate, in North East Lincolnshire, England. The depot code is IM.
The Great Grimsby and Sheffield Junction Railway was an early British railway company which existed between 1845 and 1847 with the intention of providing rail services between Grimsby, New Holland and Gainsborough in the county of Lincolnshire. It amalgamated with the Sheffield, Ashton-Under-Lyne and Manchester Railway and the Sheffield and Lincolnshire Junction Railway, the three being renamed the Manchester, Sheffield and Lincolnshire Railway in 1847.
The Port of Hull is a port at the confluence of the River Hull and the Humber Estuary in Kingston upon Hull, in the East Riding of Yorkshire, England.
Immingham Dock railway station served the dock at Immingham, Lincolnshire, England.
Immingham railway station was a special excursion station built along the port's eastern jetty to cater for traffic to passenger ships on cruises to the North Cape, Norwegian Fjords and the Baltic.
The Port of Grimsby is located on the south bank of the Humber Estuary at Grimsby in North East Lincolnshire. Sea trade out of Grimsby dates to at least the medieval period. The Grimsby Haven Company began dock development in the late 1700s, and the port was further developed from the 1840s onwards by the Manchester, Sheffield and Lincolnshire Railway (MSLR) and its successors. The port has had three main dock systems:
The Barton and Immingham Light Railway is a railway line in North Lincolnshire and North East Lincolnshire, Lincolnshire, England. It ran from a junction at Goxhill to Immingham Dock. Another spur runs from Immingham Dock to Ulceby. It was later absorbed by the Great Central Railway and later, on grouping, it passed to the London and North Eastern Railway. The railway is used for freight traffic to the ports at Immingham. The section from Goxhill to North Killingholme was mothballed and lifted. The track is still in situ but now overgrown and out of use.
The South Humberside Main Line runs from Doncaster on the East Coast Main Line to Thorne where it diverges from the Sheffield to Hull Line. It then runs eastwards to Scunthorpe and the Humber ports of Immingham and Grimsby, with the coastal resort of Cleethorpes as terminus.
The south bank of the Humber Estuary in England is a relatively unpopulated area containing large scale industrial development built from the 1950s onward, including national scale petroleum and chemical plants as well as gigawatt scale gas fired power stations.
North Killingholme Haven is a water outlet on the south bank of the Humber Estuary in the civil parish of North Killingholme, to the north-west of the Port of Immingham.
Immingham Western Jetty railway station was the first railway station which served the dock in Immingham, Lincolnshire, England. It was replaced by Immingham Dock.
New Holland engine shed was a small railway locomotive maintenance depot located southwest of the triangle of lines south of New Holland Town station in North East Lincolnshire, England.
Grimsby engine shed was a railway locomotive maintenance depot located southeast of Grimsby Docks station in North East Lincolnshire.
Immingham Halt railway station was a temporary terminus serving people involved in building Immingham Dock, Lincolnshire, England. It was originally named "Immingham Road", but was renamed Immingham Halt when it was upgraded from an unadvertised halt for contractors' workmen to a publicly advertised station in 1910, though it appeared in Bradshaw as plain "Immingham".
Grimsby Pyewipe Road railway station was a temporary terminus serving people involved in building Immingham Dock, Lincolnshire, England.
↑ Burdall, A.C.; Reed, C.B.M. (2000), "11. Project procurement and administration", in Carmichael, J. (ed.), The global change?: International Ports Congress 1999, pp.107–, ISBN0727728288
↑ Alberci, Sacha (27 March 2014). "Overview of UK Biofuel Producers"(PDF). Ecofys 2014 by order of: Department for Transport (DfT). Table 1, p.6; p.10. Retrieved 9 July 2015.
↑ "Biofuels". www.projenbioenergy.co.uk. Retrieved 9 July 2015.
Hausser, P.C.G.; Finlinson, J.C.H.; Elliott, A.J. (1964), "A comparison of the design and construction of dry docks at Immingham and Jarrow", ICE Proceedings, Institute of Civil Engineers, 27 (2): 291–324, doi:10.1680/iicep.1964.10299
Herbert, M.F.L.; Rowe, P.W. (1973), "Design and performance of two coal stacks on soft clay at the N.C.B. bulk terminal, Immingham", Géotechnique, 23 (2): 245–261, doi:10.1680/geot.1973.23.2.245
Gellatly, Bob (2012), Immingham Dock Centenary Souvenir, 1912–2012: a Pictorial Record of Immingham Dock, Great Central Railway Society
Shannon, Paul (31 December 1997 – 13 January 1998). "Immingham's heavy haul". Rail. No.321. EMAP Apex Publications. pp.26–30. ISSN0953-4563. OCLC49953699.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
The Dock Offices (2007)
Immingham Dock (2008)
Immingham Oil Terminal (2008)
Immingham Bulk Terminal (2007)
West Jetty (2007)
